Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Energy Physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Simple Non-Planckian Radiation Source for ICF and HED Simulations (Rev.1)

The purpose of this paper is to present a simple way to build frequency dependent spectral (FDS) sources for use in inertial confinement fusion and high energy density physics simulations. This process takes an arbitrary temperature history and converts it into a radiation source with both Planckian and non-Planckian components, the latter of which is to describe high energy photon energies emitted by gold hohlraums. This method is then used to generate spectral energy sources for use in inertial confinement fusion (ICF) and high energy density (HED) simulations which are compared to integrated laser simulations along with experimental measurements.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

The data acquisition system of the LZ dark matter detector: FADR

The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals. This information is used to determine if the digitized waveforms should be preserved for offline analysis. The system is designed around the Kintex-7 FPGA. In addition to digitizing the PMT signals and providing basic event selection in real time, the flexibility provided by the use of FPGAs allows us to monitor the performance of the detector and the DAQ in parallel to normal data acquisition. Furthermore, the hardware and software/firmware of this FPGA-based Architecture for Data acquisition and Realtime monitoring (FADR) are discussed and performance measurements are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab

A quench detection system was developed for protecting and monitoring the superconducting solenoids for the Muon-to-Electron Conversion Experiment (Mu2e) at Fermilab. The quench system was designed for a high level of dependability and long-term continuous operation. It is based on three tiers: Tier-I, FPGA-based Digital Quench Detection (DQD); Tier-II, Analog Quench Detection (AQD); and Tier-3, the quench controls and data management system. The Tier-I and Tier-II are completely independent and fully redundant systems. The Tier-3 system is based on National Instruments (NI) C-RIO and provides the user interface for quench controls and data management. It is independent from Tiers I & II. The DQD provides both quench detection and quench characterization (monitoring) capability. Both DQD and AQD have built-in high voltage isolation and user programmable gains and attenuations. The DQD and AQD also includes user configured current dependent thresholding and validation times. A 1 st article of the three-tier system was fully implemented on the new Fermilab magnet test stand for the HL-LHC Accelerator Up-grade Project (AUP). It successfully provided quench protection and monitoring (QPM) for a cold superconducting bus test in November 2020. The Mu2e quench detection design has since been implemented for production testing of the AUP magnets. A detailed description of the system along with results from the AUP superconducting bus test will be presented.

monitoring↗
DOE OSTI2024

Comparing ab initio and quantum-kinetic approaches to electron transport in warm dense matter

Accurate knowledge of the electronic transport properties of warm dense matter is one of the main concerns of research in high-energy-density physics. Three modern approaches with vastly different levels of fidelity are reviewed and compared: the Kubo–Greenwood (KG) approach based on density-functional-theory molecular dynamics simulations (QMD), quantum kinetic theory based on average-atom models, and time-dependent density functional theory. Throughout, emphasis is placed on the connection between static properties of the electrons (e.g., density of states) and transport properties. Overall, it is found that whenever the conduction electrons can be modeled as being nearly free, fair to excellent agreement is found between QMD and kinetic theory approaches. Such a circumstance is required for modeling warm dense matter as a plasma of ions and free electrons, which is assumed in most kinetic theory approaches. The sensitivity of transport properties to the electronic structure is further highlighted by comparing different exchange–correlation approximations in QMD and KG calculations. It is found that the inclusion of exact exchange via thermal hybrid functionals can make a pronounced impact on electrical and thermal conduction in warm dense matter. We also investigate dynamic screening physics via kinetic theory and time-dependent density functional theory calculations of the mean free path of an electron in a hot dense plasma. In sum, we identify three axes along which to make progress in predicting electron transport in warm dense matter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Laser-driven flash x-ray radiography of a shocked metallic foil

Characterizing hydrodynamic instability evolution in millimeter-scale, high-Z foils is crucial for understanding complex phenomena in high-energy-density physics. Here, we demonstrate a proof-of-concept, laser-driven flash x-ray radiography platform tailored for two-dimensional linear density mapping in shocked high-Z foils. Using chromium (Cr) foils with internal shockwaves (∼100 μm width), our platform achieves a spatial resolution of 59.8 ± 1.4 μm by employing a broadband x-ray source extending into the hundreds of keV range. The setup combines a compound parabolic concentrator cone with a tantalum wire target, a magnetic field to deflect residual transmitted electrons, and a copper casing to shield the sides and rear of the image plate pack. By varying the delay of the short-pulse beam driving the flash x-ray source, we resolve shockwave dynamics, specifically the velocity, position, width, and density profile, within the Cr foil. Reported experimental results are consistent with the corresponding hydrodynamics and radiation transport simulations, which accurately reproduce the measured electron and x-ray source terms. These developments enable the conversion of shockwave radiographs into two-dimensional density maps, enhancing interpretability for hydrodynamic instability evolution applications and validating the simulation approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying electron temperature distributions from time-integrated x-ray emission spectra

K-shell x-ray emission spectroscopy is a standard tool used to diagnose the plasma conditions created in high-energy-density physics experiments. In the simplest approach, the emissivity-weighted average temperature of the plasma can be extracted by fitting an emission spectrum to a single temperature condition. It is known, however, that a range of plasma conditions can contribute to the measured spectra due to a combination of the evolution of the sample and spatial gradients. In this work, we define a parameterized model of the temperature distribution and use Markov Chain Monte Carlo sampling of the input parameters, yielding uncertainties in the fit parameters to assess the uniqueness of the inferred temperature distribution. Here we present the analysis of time-integrated S and Fe x-ray spectroscopic data from the Orion laser facility and demonstrate that while fitting each spectral region to a single temperature yields two different temperatures, both spectra can be fit simultaneously with a single temperature distribution. We find that fitting both spectral regions together requires a maximum temperature of $1310^{+90}_{-70}$ eV with significant contributions from temperatures down to 200 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The development of a high-resolution Eulerian radiation-hydrodynamics simulation capability for laser-driven Hohlraums

Hohlraums are hollow cylindrical cavities with high-Z material walls used to convert laser energy into uniform x-ray radiation drives for inertial confinement fusion capsule implosions and high energy density physics experiments. Credible computational modeling of hohlraums requires detailed modeling and coupling of laser physics, hydrodynamics, radiation transport, heat transport, and atomic physics. We report on improvements to Los Alamos National Laboratory's xRAGE radiation-hydrodynamics code in order to enable hohlraum modeling. xRAGE's Eulerian hydrodynamics and adaptive mesh refinement make it uniquely well suited to study the impacts of multiscale features in hohlraums. In order to provide confidence in this new modeling capability, we demonstrate xRAGE's ability to produce reasonable agreement with data from several benchmark hohlraum experiments. We also use xRAGE to perform integrated simulations of a recent layered high density carbon capsule implosion on the National Ignition Facility in order to evaluate the potential impacts of the capsule support tent, mixed cell conductivity methodologies, plasma transport, and cross-beam energy transfer (XBT). We find that XBT, seeded by plasma flows in the laser entrance hole (LEH), causes a slight decrease in energy coupling to the capsule and that all of these impact the symmetry of the x-ray drive such that they have an appreciable impact on the capsule implosion shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Absolute Hugoniot measurements in low-density plastic foams on the NIKE shock compression platform

The propagation of Mbar-range shock waves in low-density foam materials is of interest to target design in all approaches to inertial confinement fusion, high energy density physics, and laboratory astrophysics. We report absolute Hugoniot measurements for CH 1.72 N 0.086 O 0.37 plastic foams with 73 and 94 mg/cm 3 densities in the 32–107 km/s shock velocity range. The experiments were performed on the shock compression platform developed on the NIKE KrF laser facility at the U.S. Naval Research Laboratory. NIKE's 4 or 8-ns long flat-top laser pulses drive steady shock waves into foam targets at the ablative pressures of 1–7 Mbar. The propagation of the ablation and shock fronts is tracked continuously in time using streaked side-on monochromatic x-ray imaging radiography. The straight x−t trajectories of the shock and ablation fronts in the recorded streak images confirmed their steadiness. The SESAME tabulated equation of state predictions generally agrees with our Hugoniot data within a 95% confidence band. The experimental uncertainty of the evaluated shock density compression ratios remains large, indicating the need for more experiments and improved theoretical understanding of the strong shock propagation mechanisms in dry foams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Is infrared-collinear safe information all you need for jet classification?

Machine learning-based jet classifiers are able to achieve impressive tagging performance in a variety of applications in high-energy and nuclear physics. However, it remains unclear in many cases which aspects of jets give rise to this discriminating power, and whether jet observables that are tractable in perturbative QCD such as those obeying infrared-collinear (IRC) safety serve as sufficient inputs. In this article, we introduce a new classifier, Jet Flow Networks (JFNs), in an effort to address the question of whether IRC unsafe information provides additional discriminating power in jet classification. JFNs are permutation-invariant neural networks (deep sets) that take as input the kinematic information of reconstructed subjets. The subjet radius and a cut on the subjet’s transverse momenta serve as tunable hyperparameters enabling a controllable sensitivity to soft emissions and nonperturbative effects. We demonstrate the performance of JFNs for quark vs. gluon and Z vs. QCD jet tagging. For small subjet radii and transverse momentum cuts, the performance of JFNs is equivalent to the IRC-unsafe Particle Flow Networks (PFNs), demonstrating that infrared-collinear unsafe information is not necessary to achieve strong discrimination for both cases. As the subjet radius is increased, the performance of the JFNs remains essentially unchanged until physical thresholds that we identify are crossed. For relatively large subjet radii, we show that the JFNs may offer an increased model independence with a modest tradeoff in performance compared to classifiers that use the full particle information of the jet. These results shed new light on how machines learn patterns in high-energy physics data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Future accelerator projects: new physics at the energy frontier

High-energy colliders provide direct access to the energy frontier, allowing to search for new physics at scales as high as the machine’s center-of-mass energy, perform precision measurements of the Standard Model (SM) parameters, including those related to the flavor sector, and determine the Higgs boson properties and their connection to electroweak symmetry breaking. Each proposed future collider option has its own specific science goals and capabilities, depending on the designed running energy (energies) amongst other parameters. In this paper, an overview of the discovery potential of future circular and linear colliders is presented. Results from searches for beyond the Standard Model (BSM) phenomena at proton–proton, proton–electron, electron–positron, and muon–antimuon colliders are summarized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Performance of neutron and proton irradiated AC-LGAD sensors

Characterization of strip and pixel AC-LGAD devices with both laser TCT and probe station (IV/CV) will be shown on AC-LGADs irradiated with 1 MeV reactor neutrons at JSI/Ljubljana and with 400 MeV protons at FNAL ITA to fluences from 1e13~$n_{eq}/cm^2$ to a few times 1e15~$n_{eq}/cm^2$. This study was conducted within the scope of the ePIC detector time of flight (TOF) layer R&D program at the EIC, which will feature AC-LGADs with strip and pixel geometry. Sensors in the TOF layer will receive up to 1e13 $n_{eq}/cm^2$ fluence over the lifetime of the experiment.

AC-LGAD strips↗
DOE OSTI2020

Improvised Electrsopinning Set Up for Thicker Ceramic Nanofiber Mat for High Power Targets

In high energy particle physics there is a demand for multi-MW high performance particle production targets. Nanofiber microstructure will have better performance than current solid targets in mitigating increased thermal tress waves, radiation damage. The objective is to fabricate thicker ceramic/metallic nano-fiber with high strength, thermal shock resistance using low cost electrospinning process.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

hls4ml: A Flexible, Open-Source Platform for Deep Learning Acceleration on Reconfigurable Hardware

We present hls4ml, a free and open-source platform that translates machine learning (ML) models from modern deep learning frameworks into high-level synthesis (HLS) code that can be integrated into full designs for field-programmable gate arrays (FPGAs) or application-specific integrated circuits (ASICs). With its flexible and modular design, hls4ml supports a large number of deep learning frameworks and can target HLS compilers from several vendors, including Vitis HLS, Intel oneAPI and Catapult HLS. Together with a wider eco-system for software-hardware co-design, hls4ml has enabled the acceleration of ML inference in a wide range of commercial and scientific applications where low latency, resource usage, and power consumption are critical. In this paper, we describe the structure and functionality of the hls4ml platform. The overarching design considerations for the generated HLS code are discussed, together with selected performance results.

FOS: Computer and information sciences↗
DOE OSTI2021

Lattice determination of 𝐼=0 and 2 𝜋⁢𝜋 scattering phase shifts with a physical pion mass

Phase shifts for 𝑠-wave 𝜋⁢𝜋 scattering in both the 𝐼 =0 and 𝐼 =2 channels are determined from a lattice QCD calculation performed on 741 gauge configurations obeying G-parity boundary conditions with a physical pion mass and lattice size of 32 3 ×64. These results support our recent 2021 study of direct 𝐶⁢𝑃 violation in 𝐾 → 𝜋⁢𝜋 decay, improving our earlier 2015 calculation. The phase shifts are determined for both stationary and moving 𝜋⁢𝜋 systems, at three (𝐼 = 0) and four (𝐼 = 2) different total momenta. We implement several 𝜋⁢𝜋 interpolating operators including a scalar bilinear “𝜎” operator and paired single-pion bilinear operators with the constituent pions carrying various relative momenta. Several techniques, including correlated fitting and a bootstrap determination of p-values have been used to refine the results and a comparison with the generalized eigenvalue problem method is given. A detailed systematic error analysis is performed which allows phase shift results to be presented at a fixed energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Electron pulse-dilation diagnostic instruments

During the past decade, a number of diagnostic instruments have been developed that utilize electron pulse-dilation to achieve temporal resolution in the 5–30 ps range. These development efforts were motivated by the need for advanced diagnostics for high-energy density physics experiments around the world. The new instruments include single- and multi-frame gated imagers and non-imaging detectors that record continuous data streams. Electron pulse-dilation provides high-speed detection capability by converting incoming signals into a free electron cloud and manipulating the electron signal with electric and magnetic fields. In this paper we discuss design details and applications of these instruments along with issues and challenges associated with employing the electron pulse-dilation technique. Additionally, methods to characterize instrument performance and improve tolerance to gamma and neutron background radiation are discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Direct imaging of shock wave splitting in diamond at Mbar pressure

Understanding the behavior of matter at extreme pressures of the order of a megabar (Mbar) is essential to gain insight into various physical phenomena at macroscales—the formation of planets, young stars, and the cores of super-Earths, and at microscales—damage to ceramic materials and high-pressure plastic transformation and phase transitions in solids. Under dynamic compression of solids up to Mbar pressures, even a solid with high strength exhibits plastic properties, causing the induced shock wave to split in two: an elastic precursor and a plastic shock wave. This phenomenon is described by theoretical models based on indirect measurements of material response. The advent of x-ray free-electron lasers (XFELs) has made it possible to use their ultrashort pulses for direct observations of the propagation of shock waves in solid materials by the method of phase-contrast radiography. However, there is still a lack of comprehensive data for verification of theoretical models of different solids. Here, we present the results of an experiment in which the evolution of the coupled elastic–plastic wave structure in diamond was directly observed and studied with submicrometer spatial resolution, using the unique capabilities of the x-ray free-electron laser (XFEL). The direct measurements allowed, for the first time, the fitting and validation of the 2D failure model for diamond in the range of several Mbar. Our experimental approach opens new possibilities for the direct verification and construction of equations of state of matter in the ultra-high-stress range, which are relevant to solving a variety of problems in high-energy-density physics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Energy Dependence in the Neutrino Scattering Data of MINERvA

As we prepare for lower neutrino energy beams where physics is highly energy-dependent, it is important to isolate factors that can contribute largely to these low energy neutrino experiments. The world of neutrino oscillation experiments uses a wide range of energies: from 0.7 GeV beam of T2K and MicroBooNE, 2 GeV beam of NOvA, to the 0.6 to 6.0 GeV beam produced by DUNE in the future. MINERvA’s data are currently the best place to test the upper end of the range for DUNE and can be extrapolated into both DUNE’s and NOvA’s oscillation maximum. The goal of the research is to constrain energy dependence in the neutrino scattering experiment using data from MINERvA and then determine what factors contribute to the observed energy dependence. The research is divided into two parts. First, I will analyze different theoretical models in different channels of interaction, such as the quasi-elastic and delta resonance channels, in terms of neutrino energy dependence. The goal is to study the models at the level of the structure functions, which emphasizes the W2 structure function (the C function for QE) dominates the MINERvA data, but the W3 is increasingly important for NOvA and DUNE. The second half of the research is data-driven and focuses on the different detectors and systematic effects. An experimental effect, the angle acceptance, is larger than the structure function effects. However, it is a detector geometry effect and is well measured and well modeled. Other effects such as the muon energy scale are small and localized. Additionally, the research will determine if the MINERvA GENIE model correctly predicts all of the energy dependence seen in the data, and identify the remaining unmodeled energy dependence between the MINERvA data and its best simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

HIGH VOLTAGE DESIGN AND EVALUATION OF WIEN FILTERS FOR THE CEBAF 200 keV INJECTOR UPGRADE

High-energy nuclear physics experiments at the Jefferson Lab Continuous Electron Beam Accelerator Facility (CEBAF) require highly spin-polarization electron beams, produced from strained super-lattice GaAs photocathodes, activated to negative electron affinity in a photogun operating at 130 kV dc. A pair of Wien filter spin rotators in the injector defines the orientation of the electron beam polarization at the end station target. An upgrade of the CEBAF injector to better support the upcoming MOLLER experiment requires increasing the electron beam energy to 200 keV, to reduce unwanted helicity correlated intensity and position systematics and provide precise control of the polarization orientation. Our contribution describes design, fabrication and testing of the high voltage system to upgrade the Wien spin rotator to be compatible with the 200 keV beam. This required Solidworks modeling, CST and Opera electro- and magnetostatic simulations, upgrading HV vacuum feedthroughs, and assembly techniques for improving electrode alignment. The electric and magnetic fields required by the Wien condition and the successful HV characterization under vacuum conditions are also presented.

Palacios-Serrano, G.↗