Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Effects of dynamic heat fluxes on model climate sensitivity Meridional sensible and latent heat fluxes

The high- and low-latitude radiative-dynamic (HLRD) climatic model of Wang et al. (1984) was used to study the effect of meridional heat (MH) fluxes on climate changes caused by increases of CO2 abundance and solar constant variations. However, the empirical MH parameterization of the HLRD model was replaced by physically based parameterization, which gives separate meridional sensible and latent heat fluxes and provides a complete representation of the dependence of the flux on the mean temperature field. Both parameterization methods yielded about the same changes in global mean surface temperature and ice line, and both produced only small changes in meridional temperature gradient, although the latter were even smaller with the physically based parameterizations. At any latitude, the hemispheric mean surface temperature, rather than MH fluxes, dominates the surface temperature changes.

Gutowski, W. J., Jr.↗

The Lewis Heat Pipe Code with Application to SP-100 GES Heat Pipes

The NASA Lewis Research Center has a thermal management program supporting SP-100 goals, which includes heat pipe radiator development. As a part of the program Lewis has elected to prepare an in-house heat pipe code tailored to the needs of its SP-100 staff to supplement codes from other sources. The latter, designed to meet the needs of the originating organizations, were deemed not entirely appropriate for use at Lewis. However, a review of their features proved most beneficial in the design of the Lewis code.

Baker, Karl W.↗

Heat transfer with very high free-stream turbulence and heat transfer with streamwise vortices

Two experimental programs related to augmentation of heat transfer by complex flow characteristics are reviewed. The first program deals with very high turbulence (up to 63 percent) which was shown to result in Stanton numbers as much as five times the expected values. Results from a number of trials show that fixing the free stream velocity, x-Reynolds number, turbulence intensity and integral length scale does not fix the Stanton number. Two such cases were found in which the Stanton number of one was 40 percent larger than the other. Mean velocity and mean temperature profiles are presented, as well as profiles of turbulence intensity within the boundary layer. The second program deals with vortices originating at bluff bodies and traveling downstream embedded in the wall boundary layer. Velocity vector maps from the boundary layers and distributions of Stanton number on the wall are presented for three types of bodies: square, cylindrical and teardrop. The heat transfer and velocity maps do not show evidence of the expected horseshoe vortices but, instead, show a strong common flow up vortex pair. The fluid mechanic mechanism responsible for this secondary flow field has not yet been identified.

Moffat, Robert J.↗

Convective heat flow in space cryogenics plugs - Critical and moderate He II heat flux densities

Plug flow rates of entropy, heat and normal fluid in phase separators and in zero net mass flow systems are, to some extent, quite similar. A simplified analysis of critical conditions is presented in agreement with data trends. A critical temperature gradient arises on the basis of the He II two-fluid model at the stability limit constraining the thermohydrodynamics of the system. Thus, the question of critical thermodynamic fluctuations associated with nucleation versus the possibility of critical gradients in externally imposed parameters is answered in favor of the latter route toward turbulence. Furthermore, a similarity equation is presented which incorporates size dependent rates for moderate heat flow densities observed in experiments.

Yuan, S. W. K.↗

Initial characterization of a modular heat exchanger with an integral heat pipe

As part of the Civil Space Technology Initiative (CSTI) Advanced Technology program, a conceptual design of the Stirling space engibe (SSE) was generated to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space missions. The free-piston Stirling engine (FPSE) was chosen as the growth option in the CSTI program. An existing FPSE was modified as a test bed for a modular heat exchanger evaluation. Evaluation of the individual heat pipes before installation in the engine is described.

Schreiber, Jeffrey G.↗

Evaluation of sensible heat flux, latent heat flux, and effective aerodynamic roughness at the land surface from a combination of satellite and in-situ data

A simple method is presented for using the daytime rise of the PBL height, combined with coincident satellite skin temperature measurements, to evaluate sensible heating and the effective surface roughness for heat transfer at synoptic locations. Multiple runs of a combination surface layer-mixed layer model are made in the central U.S., varying the values of surface moisture and roughness length around climatological means, and initializing the model with a set of atmospheric conditions from the synoptic report. The results, shown in figures and tables, are quite reasonable and spatially coherent, and depict well the sharp change in surface moisture and roughness which is known to take place across the central U.S.

Diak, George R.↗

Flexible heating head for induction heating

An induction heating head includes a length of wire having first and second opposite ends and being wound in a flat spiral shape to form an induction coil, a capacitor connected to the first and second ends of the wire, the induction coil and capacitor defining a tank circuit, and a flexible, elastomeric body molded to encase the induction coil. When a susceptor is placed in juxtaposition to the body, and the tank circuit is powered, the susceptor is inductively heated.

Fox, Robert L.↗

Plasma Heating and Ultrafast Semiconductor Laser Modulation Through a Terahertz Heating Field

Electron-hole plasma heating and ultrafast modulation in a semiconductor laser under a terahertz electrical field are investigated using a set of hydrodynamic equations derived from the semiconductor Bloch equations. The self-consistent treatment of lasing and heating processes leads to the prediction of a strong saturation and degradation of modulation depth even at moderate terahertz field intensity. This saturation places a severe limit to bandwidth achievable with such scheme in ultrafast modulation. Strategies for increasing modulation depth are discussed.

Li, Jian-Zhong↗

Light masking of circadian rhythms of heat production, heat loss, and body temperature in squirrel monkeys

Whole body heat production (HP) and heat loss (HL) were examined to determine their relative contributions to light masking of the circadian rhythm in body temperature (Tb). Squirrel monkey metabolism (n = 6) was monitored by both indirect and direct calorimetry, with telemetered measurement of body temperature and activity. Feeding was also measured. Responses to an entraining light-dark (LD) cycle (LD 12:12) and a masking LD cycle (LD 2:2) were compared. HP and HL contributed to both the daily rhythm and the masking changes in Tb. All variables showed phase-dependent masking responses. Masking transients at L or D transitions were generally greater during subjective day; however, L masking resulted in sustained elevation of Tb, HP, and HL during subjective night. Parallel, apparently compensatory, changes of HL and HP suggest action by both the circadian timing system and light masking on Tb set point. Furthermore, transient HL increases during subjective night suggest that gain change may supplement set point regulation of Tb.

Non-NASA Center↗

The Use of Solar Heating and Heat Cured Polymers for Lunar Surface Stabilization

Dust ejecta can affect visibility during a lunar landing, erode nearby coated surfaces and get into mechanical assemblies of in-place infrastructure. Regolith erosion was observed at many of the Apollo landing sites. This problem needs to be addressed at the beginning of the lunar base missions, as the amount of infrastructure susceptible to problems will increase with each landing. Protecting infrastructure from dust and debris is a crucial step in its long term functionality. A proposed way to mitigate these hazards is to build a lunar launch pad. Other areas of a lunar habitat will also need surface stabilization methods to help mitigate dust hazards. Roads would prevent dust from being lifted during movement and dust free zones might be required for certain areas critical to crew safety or to critical science missions. Work at NASA Kennedy Space Center (KSC) is investigating methods of stabilizing the lunar regolith including: sintering the regolith into a solid and using heat or UV cured polymers to stabilize the surface. Sintering, a method in which powders are heated until fusing into solids, has been proposed as one way of building a Lunar launch/landing pad. A solar concentrator has been built and used in the field to sinter JSC-1 Lunar stimulant. Polymer palliatives are used by the military to build helicopter landing pads and roads in dusty and sandy areas. Those polymers are dispersed in a solvent (water), making them unsuitable for lunar use. Commercially available, solvent free, polymer powders are being investigated to determine their viability to work in the same way as the solvent borne terrestrial analog. This presentation will describe the ongoing work at KSC in this field. Results from field testing will be presented. Physical testing results, including compression and abrasion, of field and laboratory prepared samples will be presented.

Hintze, Paul↗

Liquid metal heat exchanger for efficient heating of soils and geologic formations

Apparatus for efficient heating of subterranean earth includes a well-casing that has an inner wall and an outer wall. A heater is disposed within the inner wall and is operable within a preselected operating temperature range. A heat transfer metal is disposed within the outer wall and without the inner wall, and is characterized by a melting point temperature lower than the preselected operating temperature range and a boiling point temperature higher than the preselected operating temperature range.

DeVault, Robert C↗

Measured Space Conditioning and Water Heating Performance of a Ground-Source Integrated Heat Pump in a Residential Application

In an effort to reduce residential building energy consumption, a ground-source integrated heat pump was developed to meet a home s entire space conditioning and water heating needs, while providing 50% energy savings relative to a baseline suite of minimum efficiency equipment. A prototype 7.0 kW system was installed in a 344 m2 research house with simulated occupancy in Oak Ridge, TN. The equipment was monitored from June 2012 through January 2013.

Munk, Jeffrey D↗

High Magnetic Field Processing (HMFP): A Heat-Free, Heat-Treating Method

This factsheet describes a research project whose main goal is to research and develop high magnetic field processing (HMFP) technology for selected high-energy consumption heat treatment operations by reducing or eliminating the need for cryogenic cooling or double temper heat treatments.

Energy Intensive Processes↗

Methods of forming components of heat exchangers and methods of forming heat exchangers

A method of forming at least a component of a heat exchanger comprises introducing a feed material comprising a first portion including a matrix material and a second portion including a sacrificial material on a surface of a substrate, exposing at least the first portion to energy to form bonds between particles of the matrix material and form a first thickness of a structure, introducing additional feed material comprising the first portion over the first thickness of the structure, exposing the additional feed material to energy to form a second thickness of the structure, and removing the sacrificial material from the structure to form at least one channel in the structure. Related heat exchangers and components, and related methods are disclosed.

van Rooyen, Isabella J.↗

Recent Advancements and Prospects of Chemical Heat Pumps for Temperature Amplification for Nuclear Process Heat Applications

The energy economy is continually evolving, particularly in terms of primary energy sources, their conversions to useful forms such as electricity and heat, and their utilization in different sectors, in response to socio-political factors. Because nuclear energy source is a clean and non-carbon-emitting energy source, it is crucial to consider its role in the evolution of the energy economy. Integrated Energy Systems (IES) are collaboratively controlled systems that can dynamically apportion thermal and/or electrical energy to promote the production of various energy products and have the potential to reduce greenhouse gas (GHG) emissions, improve energy efficiency, improve electrical grid dependability, and enhance energy economics. To realize the benefits of IES with the current reactor fleets, selection and development of a complimentary temperature upgrading technology are necessary for providing process heat and improving economics.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Formation of non-toxic Aβ fibrils by small heat shock protein under heat-stress conditions

Highlights: ► We examined effect of the quaternary structure of yeast sHsp on Aβ aggregation. ► Aβ aggregation was inhibited by the oligomeric form of sHsp, but not by dimeric sHsp. ► The fibrillar amyloids consisted of both Aβ and dimeric sHsp. ► They exhibited different inner structure and cytotoxicity from authentic Aβ amyloids. ► These results suggest the formation of new type fibrillar Aβ amyloid by sHsp. -- Abstract: Small heat shock protein (sHsp) is a molecular chaperone with a conserved alpha-crystallin domain that can prevent protein aggregation. It has been shown that sHsps exist as oligomers (12–40 mer) and their dissociation into small dimers or oligomers is functionally important. Since several sHsps are upregulated and co-localized with amyloid-β (Aβ) in senile plaques of patients with Alzheimer’s disease (AD), sHsps are thought to be involved in AD. Previous studies have also shown that sHsp can prevent Aβ aggregation in vitro. However, it remains unclear how the quaternary structure of sHsp influences Aβ aggregation. In this study, we report for the first time the effect of the quaternary structure of sHsp on Aβ aggregation using sHsp from the fission yeast Schizosaccharomyces pombe (SpHsp16.0) showing a clear temperature-dependent structural transition between an oligomer (30 °C) and dimer (50 °C) state. Aβ aggregation was inhibited by the oligomeric form of SpHsp16.0. In contrast, amyloid fibrils were formed in the presence of dimeric SpHsp16.0. Interestingly, these amyloid fibrils consisted of both Aβ and SpHsp16.0 and showed a low ThT intensity and low cytotoxicity due to their low binding affinity to the cell surface. These results suggest the formation of novel fibrillar Aβ amyloid with different characteristics from that of the authentic Aβ amyloid fibrils formed in the absence of sHsp. Our results also suggest the potential protective role of sHsp in AD under stress conditions.

60 APPLIED LIFE SCIENCES↗

The effect of rotation and viscous heating on the interpretation of experimental heat diffusivities in the edge pedestal

A formalism is presented for evaluating the effect of plasma rotation, via viscous heating, on the interpretation of thermal conductivities from measured temperature and density gradients in the edge pedestal. An application to a H-mode DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharge indicates that the effect could be significant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Technical Subtopic 2.1: Modeling Variable Refrigerant Flow Heat Pump and Heat Recovery Equipment in EnergyPlus

The University of Central Florida/Florida Solar Energy Center, in cooperation with the Electric Power Research Institute and several variable-refrigerant-flow heat pump (VRF HP) manufacturers, provided a detailed computer model for a VRF HP system in the United States Department of Energy’s (U.S. DOE) EnergyPlus™ building energy simulation tool. Detailed laboratory testing and field demonstrations were performed to measure equipment performance and compare this performance to both the manufacturer’s data and that predicted by the use of this new model through computer simulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗