Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPERVELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Trinity Phase 2 Open Science: CTH

CTH is an Eulerian hydrocode developed by Sandia National Laboratories (SNL) to solve a wide range of shock wave propagation and material deformation problems. Adaptive mesh refinement is also used to improve efficiency for problems with a wide range of spatial scales. The code has a history of running on a variety of computing platforms ranging from desktops to massively parallel distributed-data systems. For the Trinity Phase 2 Open Science campaign, CTH was used to study mesoscale simulations of the hypervelocity penetration of granular SiC powders. The simulations were compared to experimental data. A scaling study of CTH up to 8192 KNL nodes was also performed, and several improvements were made to the code to improve the scalability.

97 MATHEMATICS AND COMPUTING↗

Pre-Compressed Targets for Gas Gun Studies

This work developed the capability for pre-compressing targets for Hugoniot measurements utilizing gas gun driven flyer plates. Initial condition control, such as pre-compression, allows access to states off the principal Hugoniot and in the case of highly compressible materials, the locus of shock states may be well off (significantly denser than) the principal Hugoniot even for relatively modest (~100's MPa) initial pressures. The design and operation of the pre-compression target hardware will be discussed in relation to functionality and design considerations for dynamic testing. Capability for loading of super critical gases and gas mixtures has been successfully demonstrated and dynamic hypervelocity impacts of helium were tested. Example loading of supercritical alcohol (ethanol) will is presented in the context of previous impact studies of initially ambient quiescent liquid. Advantages and limitations of the system are discussed in the context accessing highly compressed states.

42 ENGINEERING↗

Numerical Simulations of Cratering Effects in Adobe

This paper outlines a new simplified approach to developing a material model for adobe. The approach is to fit the equation of state (EOS) using a Mie-Gruneisen (MGR) analytical model with a P-Alpha compaction law, and to fit the pressure-dependent yield surface with the Geological Yield Surface (GEO) modeled in CTH using well characterized adobe. By identifying key parameters that governed material response, this simplified modeling approach aimed to increase the understanding of the shock compaction and compression behavior of adobe. The new simplified model for adobe represented in this paper replicated the features of past experimental penetration data. At low velocities the penetration behavior of steel spheres into adobe is captured by Stokes law, where the drag coefficient is inversely proportional to the Reynolds number. Each inherently different adobe material investigated had a separate linear region with the slope equal to the inverse of the coefficient of drag multiplied by impact velocity. A transition region following the Stokes region was identified in each adobe material, where the penetration depth was constant with increasing impact velocity. This penetration depth limit was shown to be dependent upon the yield strength of the adobe and inversely proportional to the initial density. Finally, examining the sensitivity of the penetration depth to the key model parameters, the material model for adobe was adjusted to provide the best fit to the experimental penetration data. In addition, a simplified water content, or initial saturation of the adobe, was introduced as another relevant parameter to characterize the response. Using this simple material model for adobe, validated with experimental penetration data, the response of adobe targets to hypervelocity impact of a variety of projectile types can be reliably predicted.

36 MATERIALS SCIENCE↗

CVEN 5899 Internship report

The internship is under the project of Center for Space and Earth Science student fellow program of Los Alamos National Laboratory (LANL). The topic of the project is grain-scale prediction of hypervelocity projectile penetration into terrestrial and extraterrestrial granular materials, which is also my PhD research topic. In this research, we would like to use discrete element method (DEM) to simulate the hyper-speed penetration into granular materials and compare with experiment results. The experiment is done by the Proton Radiography (pRad) team of LANL. In the experiment, a jet traveled through the sand with velocity of 4 km/s (fig.1). Our goal is to develop the large deformation constitutive model by the stress and strain upscaling, study the fluid (air) behavior and particle fracture during the hyperspeed penetration.

36 MATERIALS SCIENCE↗

Parallel scaling analysis for explicit solid dynamics in ALEGRA

Weak scaling studies were performed for the explicit solid dynamics component of the ALEGRA code on two Cray supercomputer platforms during the period 2012-2015, involving a production-oriented hypervelocity impact problem. Results from these studies are presented, with analysis of the performance, scaling, and throughput of the code on these machines. The analysis demonstrates logarithmic scaling of the average CPU time per cycle up to core counts on the order of 10,000. At higher core counts, variable performance is observed, with significant upward excursions in compute time from the logarithmic trend. However, for core counts less than 10,000, the results show a 3 × improvement in simulation throughput, and a 2 × improvement in logarithmic scaling. This improvement is linked to improved memory performance on the Cray platforms, and to significant improvements made over this period to the data layout used by ALEGRA.

97 MATHEMATICS AND COMPUTING↗

Modeling a Miniature Voitenko-Like Explosively-Driven Shock Tube Using FLAG

Using the FLAG hydrocode, hypervelocity plasma jets observed in miniature explosively–driven shock tube experiments have been modeled with a relative error in velocity of less than 5% (a reduction from previous attempts which yielded errors of 37%). This suggests that FLAG may be well-suited to model HE systems involving the acceleration of gases through complex crack systems in HE devices: A phenomenon not accurately captured using current modeling capabilities. The Eulerian hydrocode model presented here leverages AMR to reduce computational cost and, importantly, it was found that mesh resolution and model geometry each significantly affected the average jet velocity. The model and the results are detailed here together with comments on challenges during its development and avenues for future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final report on the Magnetized Target Fusion Collaboration

Nuclear fusion has the potential to satisfy the prodigious power that the world will demand in the future, but it has yet to be harnessed as a practical energy source. The entry of fusion as a viable, competitive source of power has been stymied by the challenge of finding an economical way to provide for the confinement and heating of the plasma fuel. It is the contention here that a simpler path to fusion can be achieved by creating fusion conditions in a different regime at small scale (~ a few cm). One such program now under study, referred to as Magnetized Target Fusion (MTF), is directed at obtaining fusion in this high energy density regime by rapidly compressing a compact toroidal plasmoid commonly referred to as a Field Reversed Configuration (FRC). To make fusion practical at this smaller scale, an efficient method for compressing the FRC to fusion gain conditions is required. In one variant of MTF a conducting metal shell is imploded electrically. This radially compresses and heats the FRC plasmoid to fusion conditions. The closed magnetic field in the target plasmoid suppresses the thermal transport to the confining shell, thus lowering the imploding power needed to compress the target. The undertaking to be described in this proposal is to provide a suitable target FRC, as well as a simple and robust method for inserting and stopping the FRC within the imploding liner. The timescale for testing and development can be rapidly accelerated by taking advantage of a new facility funded by the Department of Energy. At this facility, two inductive plasma accelerators (IPA) were constructed and tested. Recent experiments with these IPAs have demonstrated the ability to rapidly form, accelerate and merge two hypervelocity FRCs into a compression chamber. The resultant FRC that was formed was hot (T&ion ~ 400 eV), stationary, and stable with a configuration lifetime several times that necessary for the MTF liner experiments. The accelerator length was less than 1 meter, and the time from the initiation of formation to the establishment of the final equilibrium was less than 10 microseconds. With some modification, each accelerator was made capable of producing FRCs suitable for the production of the target plasma for the MTF liner experiment. Based on the initial FRC merging/compression results, the design and methodology for an experimental realization of the target plasma for the MTF liner experiment can now be defined. A high density FRC plasmoid is to be formed and accelerated out of each IPA into a merging/compression chamber similar to the imploding liner at AFRL. The properties of the resultant FRC plasma (size, temperature, density, flux, lifetime) are obtained in the reevant regime of interest. The process still needs to be optimized, and a final design for implementation at AFRL must now be carried out. When implemented at AFRL it is anticipated that the colliding/merging FRCs will then be compressed by the liner. In this manner it is hoped that ultimately a plasma with ion temperatures reaching the 10 keV range and fusion gain near unity can be obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Review of Infrasound and Seismic Observations of Sample Return Capsules since the End of the Apollo Era in Anticipation of the OSIRIS-REx Arrival

Advancements in space exploration and sample return technology present a unique opportunity to leverage sample return capsules (SRCs) towards studying atmospheric entry of meteoroids and asteroids. Specifically engineered for the secure transport of valuable extraterrestrial samples from interplanetary space to Earth, SRCs offer unexpected benefits that reach beyond their intended purpose. As SRCs enter the Earth’s atmosphere at hypervelocity, they are analogous to naturally occurring meteoroids and thus, for all intents and purposes, can be considered artificial meteors. Furthermore, SRCs are capable of generating shockwaves upon reaching the lower transitional flow regime, and thus can be detected by strategically positioned geophysical instrumentation. NASA’s OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) SRC is one of only a handful of artificial objects to re-enter the Earth’s atmosphere from interplanetary space since the end of the Apollo era and it will provide an unprecedented observational opportunity. This review summarizes past infrasound and seismic observational studies of SRC re-entries since the end of the Apollo era and presents their utility towards the better characterization of meteoroid flight through the atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

RED RUNAWAYS II: LOW-MASS HILLS STARS IN SDSS STRIPE 82

Stars ejected from the Galactic Center can be used to place important constraints on the Milky Way potential. Since existing hypervelocity stars are too distant to accurately determine orbits, we have conducted a search for nearby candidates using full three-dimensional velocities. Since the efficacy of such studies is often hampered by deficiencies in proper motion catalogs, we have chosen to utilize the reliable, high-precision Sloan Digital Sky Survey (SDSS) Stripe 82 proper motion catalog. Although we do not find any candidates which have velocities in excess of the escape speed, we identify 226 stars on orbits that are consistent with Galactic Center ejection. This number is significantly larger than what we would expect for halo stars on radial orbits and cannot be explained by disk or bulge contamination. If we restrict ourselves to metal-rich stars, we find 29 candidates with [Fe/H] > −0.8 dex and 10 with [Fe/H] > −0.6 dex. Their metallicities are more consistent with what we expect for bulge ejecta, and so we believe these candidates are especially deserving of further study. We have supplemented this sample using our own radial velocities, developing an algorithm to use proper motions for optimizing candidate selection. This technique provides considerable improvement on the blind spectroscopic sample of SDSS, being able to identify candidates with an efficiency around 20 times better than a blind search.

79 ASTRONOMY AND ASTROPHYSICS↗

Extreme Debris Disk Variability: Exploring the Diverse Outcomes of Large Asteroid Impacts During the Era of Terrestrial Planet Formation

The most dramatic phases of terrestrial planet formation are thought to be oligarchic and chaotic growth, on timescales of up to 100–200 Myr, when violent impacts occur between large planetesimals of sizes up to protoplanets. Such events are marked by the production of large amounts of debris, as has been observed in some exceptionally bright and young debris disks (termed extreme debris disks). Here we report five years of Spitzer measurements of such systems around two young solar-type stars: ID8 and P1121. The short-term (weekly to monthly) and long-term (yearly) disk variability is consistent with the aftermaths of large impacts involving large asteroid-sized bodies. We demonstrate that an impact-produced clump of optically thick dust, under the influence of the dynamical and viewing geometry effects, can produce short-term modulation in the disk light curves. The long-term disk flux variation is related to the collisional evolution within the impact-produced fragments once released into a circumstellar orbit. The time-variable behavior observed in the P1121 system is consistent with a hypervelocity impact prior to 2012 that produced vapor condensates as the dominant impact product. Two distinct short-term modulations in the ID8 system suggest two violent impacts at different times and locations. Its long-term variation is consistent with the collisional evolution of two different populations of impact-produced debris dominated by either vapor condensates or escaping boulders. The bright, variable emission from the dust produced in large impacts from extreme debris disks provides a unique opportunity to study violent events during the era of terrestrial planet formation.

79 ASTRONOMY AND ASTROPHYSICS↗

High-velocity Stars in SDSS/APOGEE DR17

We report 23 stars having Galactocentric velocities larger than 450 km s -1 in the final data release of the APOGEE survey. This sample was generated using space velocities derived by complementing the high-quality radial velocities from the APOGEE project in Sloan Digital Sky Survey's Data Release 17 (DR17) with distances and proper motions from Gaia early Data Release 3 (eDR3). We analyze the observed kinematics and derived dynamics of these stars, considering different potential models for the Galaxy. We find that three stars could be unbound depending on the adopted potential, but in general all of the stars show typical kinematics of halo stars. The APOGEE DR17 spectroscopic results and Gaia eDR3 photometry are used to assess the stellar parameters and chemical properties of the stars. All of the stars belong to the red giant branch, and, in general, they follow the abundance pattern of typical halo stars. There are a few exceptions that would deserve further analysis through high-resolution spectroscopy. In particular, we identify a high-velocity Carbon-Enhanced Metal-Poor star, with a Galactocentric velocity of 482 km s -1 . We do not confirm any hypervelocity star in the sample, but this result is very sensitive to the adopted distances and less sensitive to the Galactic potential.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Origins of Extreme Velocity Stars as Revealed by Large-scale Galactic Surveys

We assemble a large sample of 12,784 high-velocity stars with total velocity V GSR ≥ 300 km s -1 , selected from RAVE DR5, SDSS DR12, LAMOST DR8, APOGEE DR16, GALAH DR2, and Gaia EDR3. In this sample, 52 are marginally hypervelocity star (HVS) candidates that have VGSR exceeding their local escape velocities within 2σ confidence levels, 40 of which are discovered for the first time. All of the candidates are metal-poor, late-type halo stars, which are significantly different from the previously identified HVSs, which are largely massive early-type stars, discovered by extreme radial velocity. This finding suggests that our newly identified HVS candidates are ejected by different mechanisms from the previous population. To investigate their origins, for 547 extreme velocity stars with V GSR ≥ 0.8V esc , we reconstruct their backward-integrated trajectories in the Galactic potential. According to the orbital analysis, no candidates are found to be definitely ejected from the Galactic-center (GC), while eight metal-poor extreme velocity stars are found to have a closest distance to the GC within 1 kpc. Intriguingly, 15 extreme velocity stars (including 2 HVS candidates) are found to have experienced close encounters with the Sagittarius dSph, suggesting that they originated from this dSph. This hypothesis is supported by an analysis of the [α/Fe]–[Fe/H] diagram. From a preliminary analysis of all of the 547 extreme velocity stars, we propose a general picture–star ejection from Galactic subsystems such as dwarf galaxies and globular clusters can be an important channel to produce extreme velocity stars or even HVSs, particularly the metal-poor late-type halo population.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating Short-warning Mitigation via Intentional Robust Disruption of a Hypothetical Impact of Asteroid 2023 NT1

We investigate various short-warning mitigation scenarios via fragmentation for a hypothetical impact of asteroid 2023 NT1, a near-Earth object (NEO) that was discovered on 2023 July 15, two days after its closest approach to Earth on July 13. The asteroid passed by Earth within ∼0.25 lunar distances, with a closest approach of ∼1 × 10 5 km and a velocity of 11.27 km s −1 . Its size remains largely uncertain, with an estimated diameter range of 26–58 m and a most probable estimate of 34 m (JPL Sentry, 2023 September 15; weighted by the NEO size frequency distribution). If 2023 NT1 had collided with Earth, it could have caused significant local damage. Assuming a spherical asteroid with a diameter of 34 m, uniform density of 2.6 g cm −3 , and impact velocity of 15.59 km s −1 , a collision would have yielded an estimated impact energy of ∼1.5 Mt, approximately 3 times the energy of the Chelyabinsk airburst in 2013. We analyze the effectiveness of mitigation via intentional robust disruption for objects similar to 2023 NT1. We utilize Pulverize It (PI), a NASA Innovative Advanced Concepts study of planetary defense via fragmentation, to model potential mitigation scenarios through simulations of hypervelocity asteroid disruption and atmospheric ground effects in the case of a terminal defense mode. Simulations suggest that PI is an effective multimodal approach for planetary defense that can operate in extremely short interdiction modes, in addition to long interdiction timescales with extended warning. Our simulations support the proposition that threats like 2023 NT1 can be effectively mitigated with intercepts of 1 day (or less) prior to impact, yielding minimal to no ground damage.

Asteroids↗

60 Candidate High-velocity Stars Originating from the Sagittarius Dwarf Spheroidal Galaxy in Gaia EDR3

Using proper motions from Gaia Early Data Release 3 (Gaia EDR3) and radial velocities from several surveys, we identify 60 candidate high-velocity stars with a total velocity greater than 75% of the escape velocity that probably originated from the Sagittarius dwarf spheroidal galaxy (Sgr) by orbital analysis. Sgr’s gravity has little effect on the results and the Large Magellanic Cloud’s gravity has a nonnegligible effect on only a few stars. The closest approach of these stars to the Sgr occurred when the Sgr passed its pericenter (~38.2 Myr ago), which suggests they were tidally stripped from the Sgr. The positions of these stars in the Hertzsprung–Russell diagram and the chemical properties of 19 of them with available [Fe/H] are similar to the Sgr stream member stars. This is consistent with the assumption of their accretion origin. Two of the 60 are hypervelocity stars, which may also be produced by the Hills mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗

Geophysical Observations of the 2023 September 24 OSIRIS-REx Sample Return Capsule Reentry

Sample return capsules (SRCs) entering Earth's atmosphere at hypervelocity from interplanetary space are a valuable resource for studying meteor phenomena. The 2023 September 24 arrival of the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer SRC provided an unprecedented chance for geophysical observations of a well-characterized source with known parameters, including timing and trajectory. A collaborative effort involving researchers from 16 institutions executed a carefully planned geophysical observational campaign at strategically chosen locations, deploying over 400 ground-based sensors encompassing infrasound, seismic, distributed acoustic sensing, and Global Positioning System technologies. Additionally, balloons equipped with infrasound sensors were launched to capture signals at higher altitudes. This campaign (the largest of its kind so far) yielded a wealth of invaluable data anticipated to fuel scientific inquiry for years to come. The success of the observational campaign is evidenced by the near-universal detection of signals across instruments, both proximal and distal. This paper presents a comprehensive overview of the collective scientific effort, field deployment, and preliminary findings. The early findings have the potential to inform future space missions and terrestrial campaigns, contributing to our understanding of meteoroid interactions with planetary atmospheres. Furthermore, the data set collected during this campaign will improve entry and propagation models and augment the study of atmospheric dynamics and shock phenomena generated by meteoroids and similar sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗