Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Intermediate band solar cells: Recent progress and future directions

Extensive literature and publications on intermediate band solar cells (IBSCs) are reviewed. A detailed discussion is given on the thermodynamics of solar energy conversion in IBSCs, the device physics, and the carrier dynamics processes with a particular emphasis on the two-step inter-subband absorption/recombination processes that are of paramount importance in a successful implementation high-efficiency IBSC. The experimental solar cell performance is further discussed, which has been recently demonstrated by using highly mismatched alloys and high-density quantum dot arrays and superlattice. IBSCs having widely different structures, materials, and spectral responses are also covered, as is the optimization of device parameters to achieve maximum performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Demonstration of thermonuclear conditions in magnetized liner inertial fusion experiments

The magnetized liner inertial fusion concept [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] utilizes a magnetic field and laser heating to relax the pressure requirements of inertial confinement fusion. The first experiments to test the concept [M. R. Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)] were conducted utilizing the 19 MA, 100 ns Z machine, the 2.5 kJ, 1 TW Z Beamlet laser, and the 10 T Applied B-field on Z system. Despite an estimated implosion velocity of only 70 km/s in these experiments, electron and ion temperatures at stagnation were as high as 3 keV, and thermonuclear deuterium-deuterium neutron yields up to 2 × 10{sup 12} have been produced. X-ray emission from the fuel at stagnation had widths ranging from 50 to 110 μm over a roughly 80% of the axial extent of the target (6–8 mm) and lasted approximately 2 ns. X-ray yields from these experiments are consistent with a stagnation density of the hot fuel equal to 0.2–0.4 g/cm{sup 3}. In these experiments, up to 5 × 10{sup 10} secondary deuterium-tritium neutrons were produced. Given that the areal density of the plasma was approximately 1–2 mg/cm{sup 2}, this indicates the stagnation plasma was significantly magnetized, which is consistent with the anisotropy observed in the deuterium-tritium neutron spectra. Control experiments where the laser and/or magnetic field were not utilized failed to produce stagnation temperatures greater than 1 keV and primary deuterium-deuterium yields greater than 10{sup 10}. An additional control experiment where the fuel contained a sufficient dopant fraction to substantially increase radiative losses also failed to produce a relevant stagnation temperature. The results of these experiments are consistent with a thermonuclear neutron source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosing magnetized liner inertial fusion experiments on Z

Magnetized Liner Inertial Fusion experiments performed at Sandia's Z facility have demonstrated significant thermonuclear fusion neutron yields (∼10{sup 12} DD neutrons) from multi-keV deuterium plasmas inertially confined by slow (∼10 cm/μs), stable, cylindrical implosions. Effective magnetic confinement of charged fusion reactants and products is signaled by high secondary DT neutron yields above 10{sup 10}. Analysis of extensive power, imaging, and spectroscopic x-ray measurements provides a detailed picture of ∼3 keV temperatures, 0.3 g/cm{sup 3} densities, gradients, and mix in the fuel and liner over the 1–2 ns stagnation duration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical patterning of magnetic domains and defects in ferromagnetic liquid crystal colloids

A promising approach in designing composite materials with an unusual physical behavior combines solid nanostructures and orientationally ordered soft matter at the mesoscale. Such composites can not only inherit properties of their constituents but also can exhibit emergent behavior such as ferromagnetic ordering of colloidal metal nanoparticles forming mesoscopic magnetization domains when dispersed in a nematic liquid crystal. Here, we demonstrate the optical patterning of domain structures and topological defects in such ferromagnetic liquid crystal colloids, which allows for altering their response to magnetic fields. Furthermore, our findings reveal the nature of the defects in this soft matter system which is different as compared to non-polar nematics and ferromagnets alike.

36 MATERIALS SCIENCE↗

Induced representations of tensors and spinors of any rank in the Stueckelberg-Horwitz-Piron theory

We show that a modification of Wigner’s induced representation for the description of a relativistic particle with spin can be used to construct spinors and tensors of arbitrary rank, with invariant decomposition over angular momentum. In particular, scalar and vector fields, as well as the representations of their transformations, are constructed. The method that is developed here admits the construction of wave packets and states of a many body relativistic system with definite total angular momentum. Furthermore, a Pauli-Lubanski operator is constructed on the orbit of the induced representation which provides a Casimir operator for the Poincaré group and which contains the physical intrinsic angular momentum of the particle covariantly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Clean localization super-resolution microscopy for 3D biological imaging

We propose clean localization microscopy (a variant of fPALM) using a molecule filtering technique. Localization imaging involves acquiring a large number of images containing single molecule signatures followed by one-to-one mapping to render a super-resolution image. In principle, this process can be repeated for other z-planes to construct a 3D image. But, single molecules observed from off-focal planes result in false representation of their presence in the focal plane, resulting in incorrect quantification and analysis. We overcome this with a single molecule filtering technique that imposes constraints on the diffraction limited spot size of single molecules in the image plane. Calibration with sub-diffraction size beads puts a natural cutoff on the actual diffraction-limited size of single molecules in the focal plane. This helps in distinguishing beads present in the focal plane from those in the off-focal planes thereby providing an estimate of the single molecules in the focal plane. We study the distribution of actin (labeled with a photoactivatable CAGE 552 dye) in NIH 3T3 mouse fibroblast cells.

60 APPLIED LIFE SCIENCES↗

Particle-in-cell simulations of collisionless magnetic reconnection with a non-uniform guide field

Results are presented of a first study of collisionless magnetic reconnection starting from a recently found exact nonlinear force-free Vlasov–Maxwell equilibrium. The initial state has a Harris sheet magnetic field profile in one direction and a non-uniform guide field in a second direction, resulting in a spatially constant magnetic field strength as well as a constant initial plasma density and plasma pressure. It is found that the reconnection process initially resembles guide field reconnection, but that a gradual transition to anti-parallel reconnection happens as the system evolves. The time evolution of a number of plasma parameters is investigated, and the results are compared with simulations starting from a Harris sheet equilibrium and a Harris sheet plus constant guide field equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photon beamline frontends for the PETRA III extension project

The photon beamline frontend design for the new insertion device (ID) beamlines of the PETRA III extension project will be presented. The design is based on the concepts developed for the photon beamline frontends at PETRA III. This generic design approach minimized the number of specialized components for all beamlines. The girder concept with kinematic mounts at each girder allowed a fast and reliable installation phase. The extension beamlines are located in two new additional buildings. There will be 4 sectors with two undulator IDs in each sector with a canting angle of 20 mrad between the insertion devices. Additionally, two straight sections and a bending magnet chamber will be modified: one straight section will be transformed to a side station sector, the straight section with the 40 m long damping wiggler will be used as a hard X-ray source, and the bending magnet will serve as a soft-X-ray source.

43 PARTICLE ACCELERATORS↗

Suppression of collisionless magnetic reconnection in asymmetric current sheets

Using fully kinetic simulations, we study the suppression of asymmetric reconnection in the limit where the diamagnetic drift speed ≫ Alfvén speed and the magnetic shear angle is moderate. We demonstrate that the slippage between electrons and the magnetic flux mitigates the suppression and can even result in fast reconnection that lacks one of the outflow jets. Through comparing a case where the diamagnetic drift is supported by the temperature gradient with a companion case that has a density gradient instead, we identify a robust suppression mechanism. The drift of the x-line is slowed down locally by the asymmetric nature of the x-line, and then the x-line is run over and swallowed by the faster-moving following flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection of an anomalous pressure on a magneto-inertial-fusion load current diagnostic

Recent Magnetized Liner Inertial Fusion experiments at the Sandia National Laboratories Z pulsed power facility have featured a PDV (Photonic Doppler Velocimetry) diagnostic in the final power feed section for measuring load current. In this paper, we report on an anomalous pressure that is detected on this PDV diagnostic very early in time during the current ramp. Early time load currents that are greater than both B-dot upstream current measurements and existing Z machine circuit models by at least 1 MA would be necessary to describe the measured early time velocity of the PDV flyer. This leads us to infer that the pressure producing the early time PDV flyer motion cannot be attributed to the magnetic pressure of the load current but rather to an anomalous pressure. Using the MHD code ALEGRA, we are able to compute a time-dependent anomalous pressure function, which when added to the magnetic pressure of the load current, yields simulated flyer velocities that are in excellent agreement with the PDV measurement. As a result, we also provide plausible explanations for what could be the origin of the anomalous pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of reconnection electric field on crescent and U-shaped distribution functions in asymmetric reconnection with no guide field

Electron distribution functions in the electron diffusion region in asymmetric reconnection without a guide field are studied by means of theory and 2-dimensional particle-in-cell (PIC) simulations. The effect of the reconnection electric field on crescent-shaped distribution functions is to broaden the thickness of the crescent. In this paper, we express the thickness of the crescent as a function of field strengths, the distance from the X-line, and the time electrons spend executing meandering orbits. The electron distribution at the reconnection X-line exhibits a U-shaped structure with an opening angle in the direction of the reconnection electric field. We predict the opening angle of the U-shaped distribution by considering acceleration of the meandering electrons by the reconnection electric field. Results from particle tracing in PIC simulations and theoretical analysis agree. The above predictions provide guidance to interpret measurements by spacecraft from electron diffusion regions in asymmetric reconnection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The physical foundation of the reconnection electric field

Magnetic reconnection is a key charged particle transport and energy conversion process in environments ranging from astrophysical systems to laboratory plasmas [Yamada et al., Rev. Mod. Phys. 82, 603–664 (2010)]. Magnetic reconnection facilitates plasma transport by establishing new connections of magnetic flux tubes, and it converts, often explosively, energy stored in the magnetic field to kinetic energy of charged particles [J. L. Burch and J. F. Drake, Am. Sci. 97, 392–299 (2009)]. The intensity of the magnetic reconnection process is measured by the reconnection electric field, which regulates the rate of flux tube connectivity changes. The change of magnetic connectivity occurs in the current layer of the diffusion zone, where the plasma transport is decoupled from the transport of magnetic flux. Here we report on computer simulations and analytic theory to provide a self-consistent understanding of the role of the reconnection electric field, which extends substantially beyond the simple change of magnetic connections. Rather, we find that the reconnection electric field is essential to maintain the current density in the diffusion region, which would otherwise be dissipated by a set of processes. Natural candidates for current dissipation are the average convection of current carriers away from the reconnection region by the outflow of accelerated particles, or the average rotation of the current density by the magnetic field reversal in the vicinity. Instead, we show here that the current dissipation is the result of thermal effects, underlying the statistical interaction of current-carrying particles with the adjacent magnetic field. We find that this interaction serves to redirect the directed acceleration of the reconnection electric field to thermal motion. This thermalization manifests itself in form of quasi-viscous terms in the thermal energy balance of the current layer. This collisionless viscosity, found in the pressure evolution equation, dominates near the x-line. These quasi-viscous terms act to increase the average thermal energy. Our predictions regarding current and thermal energy balance are readily amenable to exploration in the laboratory or by satellite missions, in particular, by NASA's Magnetospheric Multiscale mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and testing of a magnetically driven implosion peak current diagnostic

We report that a critical component of the magnetically driven implosion experiments at Sandia National Laboratories is the delivery of high-current, 10s of MA, from the Z pulsed power facility to a target. In order to assess the performance of the experiment, it is necessary to measure the current delivered to the target. Recent Magnetized Liner Inertial Fusion (MagLIF) experiments have included velocimetry diagnostics, such as PDV (Photonic Doppler Velocimetry) or Velocity Interferometer System for Any Reflector, in the final power feed section in order to infer the load current as a function of time. However, due to the nonlinear volumetrically distributed magnetic force within a velocimetry flyer, a complete time-dependent load current unfold is typically a time-intensive process and the uncertainties in the unfold can be difficult to assess. In this paper, we discuss how a PDV diagnostic can be simplified to obtain a peak current by sufficiently increasing the thickness of the flyer. This effectively keeps the magnetic force localized to the flyer surface, resulting in fast and highly accurate measurements of the peak load current. Additionally, we show the results of experimental peak load current measurements from the PDV diagnostic in recent MagLIF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strongly localized magnetic reconnection by the super-Alfvénic shear flow

We demonstrate that the dragging of the magnetic field by the super-Alfvénic shear flows out of the reconnection plane can strongly localize the reconnection x-line in collisionless pair plasmas, reversing the current direction at the x-line. Reconnection with this new morphology, which is impossible in resistive-magnetohydrodynamics, is enabled by the particle inertia. Surprisingly, the quasi-steady reconnection rate remains of order 0.1 even though the aspect ratio of the local x-line geometry is larger than unity, which completely excludes the role of tearing physics. Here, we explain this by examining the transport of the reconnected magnetic flux and the opening angle made by the upstream magnetic field, concluding that the reconnection rate is still limited by the constraint imposed at the inflow region. Based on these findings, we propose that this often observed fast rate value of order 0.1 itself, in general, is an upper bound value determined by the upstream constraint, independent of the localization mechanism and dissipation therein.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the role of separatrix instabilities in heating the reconnection outflow region

A study of the role microinstabilities at the reconnection separatrix can play in heating the electrons during the transition from inflow to outflow is being presented. We find that very strong flow shears at the separatrix layer lead to counterstreaming electron distributions in the region around the separatrix, which become unstable to a beam-type instability. Similar to what has been seen in earlier research, the ensuing instability leads to the formation of propagating electrostatic solitons. We show here that this region of strong electrostatic turbulence is the predominant electron heating site when transiting from inflow to outflow. The heating is the result of heating generated by electrostatic turbulence driven by overlapping beams, and its macroscopic effect is a quasi-viscous contribution to the overall electron energy balance. We suggest that instabilities at the separatrix can play a key role in the overall electron energy balance in magnetic reconnection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancing performance of magnetized liner inertial fusion at the Z facility

Here, the Magnetized Liner Inertial Fusion concept (MagLIF) [Slutz et al., Phys. Plasmas 17, 056303 (2010)] is being studied on the Z facility at Sandia National Laboratories. Neutron yields greater than 1012 have been achieved with a drive current in the range of 17–18 MA and pure deuterium fuel [Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)]. We show that 2D simulated yields are about twice the best yields obtained on Z and that a likely cause of this difference is the mix of material into the fuel. Mitigation strategies are presented. Previous numerical studies indicate that much larger yields (10–1000 MJ) should be possible with pulsed power machines producing larger drive currents (45–60 MA) than can be produced by the Z machine [Slutz et al., Phys. Plasmas 23, 022702 (2016)]. To test the accuracy of these 2D simulations, we present modifications to MagLIF experiments using the existing Z facility, for which 2D simulations predict a 100-fold enhancement of MagLIF fusion yields and considerable increases in burn temperatures. Experimental verification of these predictions would increase the credibility of predictions at higher drive currents.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of resistivity and viscosity in the excitation of stable m = 0 modes during the RFP sawtooth crash

Visco-resistive magnetohydrodynamic simulations are used herein to investigate the role of resistivity and viscosity in the reversed field pinch sawtooth crash. Specifically, we examine the temporal behavior of the linearly stable ($m, n$) = (0, 1) mode. Both volume-averaged dissipation and dissipation levels in the region near the $m$ = 0 resonance are found to influence characteristic time scales. Increasing resistivity causes the mode rise time, fall time, and total crash duration to decrease, while increasing viscosity has the opposite effect. Examination of energy flow during the sawtooth crash reveals that despite the linear stability of the (0, 1) mode, it receives most of its energy from the mean current profile during the crash rather than from nonlinear interactions with other modes. Resistivity and viscosity do not impact mode behavior directly through dissipative energy loss but rather through modification of the large scale current profile evolution and radial structure of the mode. Computational results are compared to experimental data from the Madison Symmetric Torus and found to largely agree when resistivity and viscosity are similar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the guide field on electron distribution functions in the diffusion region of asymmetric reconnection

Crescent electron distribution functions in the electron diffusion region in asymmetric reconnection with a guide field (strength less than 50% of the upstream magnetic field) are investigated by theory and fully kinetic simulations. Electron motion in the electron diffusion region is a combination of meandering across the current sheet and gyration around the guide field. Combining the two canonical momentum conservation laws in a one-dimensional model with the energy conservation law, we derive the shape of crescent electron distribution functions in both velocity planes: perpendicular to the magnetic field and coplanner with the magnetic field. There are two major effects of the guide field on crescent distribution functions: (1) widening the opening angle of the crescent in a reduced distribution function and (2) the linear cut-off of a distribution function nonparallel to the magnetic field. We also discuss a translational mapping (perpendicular to the linear cut-off) of distribution functions between the X-line and another position. In addition, considering the gyration due to the normal magnetic field, we predict the shape of distribution functions in general positions in the electron diffusion region. Finally, the predictions will be useful to identify features of magnetic reconnection in a guide field by satellite observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗