Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Enhancing the reactivity of gold: Nanostructured Au(111) adsorbs CO

Low-coordinated sites are surface defects whose presence can transform a surface of inert or noble metal such as Au into an active catalyst. We prepared gold surfaces modified by pits, starting with a well-ordered Au(111) surface; we then used microscopy (STM) for their structural characterization and CO spectroscopy (IRAS and NEXAFS) for probing reactivity of surface defects. In contrast to the Au(111) surface CO adsorbs readily on the pitted surfaces bonding to low-coordinated sites identified as step atoms forming {111} and {100} microfacets. Finally, pitted nanostructured surfaces can serve as interesting and easily prepared models of catalytic surfaces with defined defects that offer an attractive alternative to vicinal surfaces or nanoparticles commonly employed in catalysis science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Gold Nanoparticle Modified Transparent Carbon Ultramicroelectrode Arrays for the Selective and Sensitive Electroanalytical Detection of Nitric Oxide

Transparent carbon ultramicroelectrode arrays (T-CUAs) were made using a previously reported facile fabrication method. Two modifications introduced to the T-CUAs were examined for their analytical response to nitric oxide (NO • ). The first modification was the application of a cellulose acetate (CA) gas permeable membrane. Its selectivity to NO • was extensively characterized via chronoamperometry, electrochemical impedance spectroscopy (EIS), and atomic force microscopy (AFM). The thickness of the CA membrane was determined to be 100 nm and 88 ± 15 nm using AFM and EIS, respectively. Furthermore, the partition and diffusion coefficients of NO • within the CA membrane were determined to be 0.0500 and 2.44 × 10 –13 m 2 /s using EIS measurements. The second modification to the 1.54T-CUA was the introduction of chitosan and gold nanoparticles (CS/GNPs) to enhance its catalytic activity, sensitivity, and limit of detection (LOD) to NO • . Square wave voltammetry was used to quantify the NO • concentration at the CA membrane covered 1.54T-CUA with and without CS/GNPs; the LODs were determined to be 0.2 ± 0.1 and 0.44 ± 0.02 $μ$M (S/N = 3), with sensitivities of 9 ± 9 and 1.2 ± 0.4 nA/$μ$M, respectively. Our results indicate that this modification to the arrays results in a significant catalytic enhancement to the electrochemical oxidation of NO • . Hence, we conclude these electrodes allow for the in situ mechanistic and kinetic characterization of electrochemical reactions with high electroanalytical sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Precision Loading and Delivery of Molecular Cargo by Size-Controlled Coacervation of Gold Nanoparticles Functionalized with Elastin-like Peptides

Thermoresponsive elastin-like peptides (ELPs) have been extensively investigated in biotechnology and medicine, but little attention has been paid to the process by which coacervation causes ELP-decorated particles to aggregate. Here, using gold nanoparticles (AuNPs) functionalized with a cysteine-terminated 96-repeat of the VPGVG sequence (V96-Cys), we show that the size of the clusters that reversibly form above the ELP transition temperature can be finely controlled in the 250 to 930 nm range by specifying the concentration of free V96-Cys in solution and using AuNPs of different sizes. We further find that the localized surface plasmon resonance peak of the embedded AuNPs progressively red-shifts with cluster size, likely due to an increase in particle–particle contacts. We exploit this fine control over size to homogeneously load precise amounts of the dye Nile Red and the antibiotic Tetracycline into clusters of different hydrodynamic diameters and deliver cargos near-quantitatively by deconstructing the aggregates below the ELP transition temperature. Beyond establishing a key role for free ELPs in the agglomeration of ELP-functionalized particles, our results provide a path for the thermally controlled delivery of precise quantities of molecular cargo. This capability might prove useful in combination photothermal therapies and theranostic applications, and to trigger spatially and temporally uniform responses from biological, electronic, or optical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Pore-Templated Growth of Catalytically Active Gold Nanoparticles within a Metal–Organic Framework

Obtaining persistently well-dispersed gold nano-particles (AuNPs) on solid support with optimum particle size for heterogeneous catalysis can be challenging. Here, we report on the channel-templated growth of AuNPs within a stable zirconium-based metal–organic framework, NU-1000, via channel-anchored monometallic precursors. Pair distribution function analysis of total X-ray scattering by the incorporated face-centered-cubic nanopar-ticles reveals a bimodal size distribution, with ca. 98% of the en-shrouded nanoparticles having a diameter that closely reflects the ~10 Å width of triangular pores and with ca. 2% closely reflecting the ~31 Å width of hexagonal pores of NU-1000. The resulting ma-terial is catalytically active (and recyclable) for condensed-phase hydrogenation of 4-nitrophenol to 4-aminophenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis of Layered Gold Tellurides AuSbTe and Au 2 Te 3 and Their Semiconducting and Metallic Behavior

Previous studies on natural samples of pampaloite (AuSbTe) revealed the crystal structure of a potentially cleavable and/or exfoliable material, while studies on natural and synthetic montbrayite (Sb-containing Au 2 Te 3 ) claimed various chemical compositions for this low-symmetry compound. Few investigations of synthetic samples have been reported for both materials, leaving much of their chemical, thermal, and electronic characteristics unknown. Here, in this study, we investigate the stability, electronic properties, and synthesis of the gold antimony tellurides AuSbTe and Au 1.9 Sb 0.46 Te 2.64 (montbrayite). Differential thermal analysis and in situ powder X-ray diffraction revealed that AuSbTe is incongruently melting, while Au 1.9 Sb 0.46 Te 2.64 is congruently melting. Calculations of the band structures and four-point resistivity measurements showed that AuSbTe is a semiconductor and Au 1.9 Sb 0.46 Te 2.64 a metal. Various synthesis attempts confirmed the limited stable chemical composition of Au 1.9 Sb 0.46 Te 2.64 , identified successful methods to synthesize both compounds, and highlighted the challenges associated with single-crystal synthesis of AuSbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Shape- and Orientation-Dependent Scattering of Isolated Gold Nanostructures Using Polarized Dark-Field Microscopy

In this work, we demonstrate a simple and robust method for measuring the shape- and orientation-dependent optical scattering of various plasmonic nanostructures adsorbed onto a solid surface using polarized dark-field microscopy. By analyzing the dark-field scattering images of gold nanostructures using grazing incidence polarized light with a bench-top microscope, we are able to correlate optical scattering from the individual nanostructures with their shape and orientation. Depending on the size, shape, and orientation of the plasmonic nanostructures, they exhibit characteristic angle- and polarization-dependent scattering signals. Extracting the red, green, and blue channels of the scattering signals from a color-imaging detector as a function of azimuthal angle provides a polar plot of color intensity values that is characteristic of the underlying nanostructure. Examples are presented for various nanostructures, including spherical nanoparticles, nanotriangles, and nanorods. Experimental results are complemented by numerical calculations of the scattering spectra of representative model nanostructures. We demonstrate that the polarization- and orientation-dependent scattering behavior is a consequence of various localized surface plasmon modes existing in the nanostructures and can be used to verify the shape of individual objects as well as quickly identify the orientation of numerous objects on a densely populated substrate. We anticipate that this method will provide a rapid and efficient complement to the typical structural analysis of nanoparticles that is achieved by electron microscopy as well as providing a simple method for generating detailed information of the optical scattering of various types of individual plasmonic nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Adsorption and Catalytic Activity of Gold Nanoparticles in Mesoporous Silica: Effect of Pore Size and Dispersion Salinity

The assembled state of nanoparticles (NPs) within porous matrices plays a governing role in directing their biological, electronic, and catalytic properties. However, the effects of the spatial confinement and environmental factors, such as salinity, on the NP assemblies within the pores are poorly understood. In this study, we use adsorption isotherms, spectrophotometry, and small-angle neutron scattering to develop a better understanding of the effect of spatial confinement on the assembled state and catalytic performance of gold (Au) NPs in propylamine-functionalized SBA-15 and MCM-41 mesoporous silica materials (mSiO 2 ). We carry out a detailed investigation of the effect of pore diameter and ionic strength on the packing and spatial distribution of AuNPs within mSiO 2 to get a comprehensive insight into the structure, functioning, and activity of these NPs. We demonstrate the ability of the adsorbed AuNPs to withstand aggregation under high salinity conditions. We attribute the observed preservation of the adsorbed state of AuNPs to the strong electrostatic attraction between oppositely charged pore walls and AuNPs. The preservation of the structure allows the AuNPs to retain their catalytic activity for a model reaction in high salinity aqueous solution, here, the reduction of p-nitrophenol to p-aminophenol, which otherwise is significantly diminished due to bulk aggregation of the AuNPs. This fundamental study demonstrates the critical role of confinement and dispersion salinity on the adsorption and catalytic performance of NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Extremely Slow Diffusion of Gold Nanoparticles under Confinement in Mesoporous Silica

Here, we report an X-ray photon correlation spectroscopy (XPCS) study of the mobility of colloidal gold nanoparticles with a diameter of approximately 4 nm in glycerol under confinement within the channels of SBA-15 mesoporous silica with pore diameters of approximately 6 and 12 nm. The XPCS correlation functions result from an effective heterodyne signal due to the mixing of the coherent scattering from the nanoparticles and the mesoporous silica. Over the range of wave vectors and hence length scales probed, the nanoparticle dynamics are well described by one-dimensional diffusion. The nanoparticle diffusivity varies with temperature in a manner expected based on the temperature-dependent viscosity of glycerol; however, the magnitudes of the diffusion coefficients are several orders of magnitude smaller than those of the nanoparticles in bulk glycerol. We consider mechanisms that might contribute to this reduction in diffusivity including enhancement in hydrodynamic drag under confinement, effects of nanoparticle adsorption to the pore walls, and slowing structural dynamics in glycerol due to the combination of the nanometer-scale confinement and the presence of the nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning Self-Assembly of Gold Nanoparticles Grafted with Charged Polymers by Varying Temperature and Electrolytes

Here, we report on the assembly of gold nanoparticles (AuNPs, 5 and 10 nm core diameters) grafted with poly(ethylene glycol) (PEG) terminated with either positively (–NH 2 ) or negatively charged (–COOH) end groups. We employ synchrotron-based small-angle X-ray scattering (SAXS) techniques to investigate the effect of electrolytes and temperature on the assembly and crystallization behavior of these grafted AuNPs. Our studies reveal that –NH 2 -grafted AuNPs spontaneously assemble into a layered hexagonal structure that deteriorates upon adding K 2 CO 3 to the suspension. The hexagonal structure recovers after heating the same suspension above 60 °C. On the other hand, the COOH-terminated AuNPs remain dispersed in the suspensions and assemble and crystallize into a face-centered cubic structure only in the presence of K 2 CO 3 at temperatures above 60 °C. Varying the pH of the –NH 2 -terminated AuNP suspensions induces short-range order (SRO) structures with a single characteristic length scale that shrinks upon heating. Similarly, SRO for the –COOH-terminated AuNP is realized only by lowering the pH. This study demonstrates the use of electrolytes and temperature on the surface charge of grafted AuNPs as knobs to tune self-assembly and crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Crystal Structure and Theoretical Analysis of Green Gold Au 30 (S- t Bu) 18 Nanomolecules and Their Relation to Au 30 S(S- t Bu) 18

We report the complete X-ray crystallographic structure as determined through single crystal X-ray diffraction and a thorough theoretical analysis of the green gold Au30(S-tBu)18. While the structure of Au30S(S-tBu)18 with 19 sulfur atoms has been reported, the crystal structure of Au30(S-tBu)18 without the μ3-sulfur has remained elusive until now, though matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) and electrospray ionization mass spectrometry (ESI-MS) data unequivocally shows its presence in abundance. The Au30(S-tBu)18 nanomolecule is not only distinct in its crystal structure but has unique temperature dependent optical properties. Structure determination allows a rigorous comparison and an excellent agreement with theoretical predictions of structure, stability, and optical response.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2016

Characterizing DNA Corona Rigidity in DNA-Directed Gold Nanoparticle Crystalline Structures

DNA-linked gold nanoparticle systems have become an adaptable self-assembly tool for programming various crystalline orders. The programmability lies in the DNA corona, a highly dense outer shell of DNA linkers that binds the nanoparticles together. Various self-assembled structures can be formed by changing the properties of the DNA corona, particularly the size ratio. However, uncertainty still remains as to the actual behavior and structural rigidity of the DNA itself, impeding advances in structural diversification. Specifically, the DNA could adopt an A-form structure after crystallization, or a more flexible DNA corona could be generated if B-form DNA persists but becomes physically bent and adsorbed to the nanoparticle surface in crystal formations. To understand the rigidity of the DNA corona, we devised a method to stretch the DNA between two nanoparticles by simultaneously using short and long linkers. This linker combination flexibly acts as a single linker, rather than two separate linkers that create two ranges of interactions. By measuring the edge-to-edge distance between the two nanoparticles using both linkers in small-angle X-ray scattering (SAXS) experiments, we recorded the first per-base contribution that is consistent with the B-form DNA rise of 3.4 Å. Here, the elucidation of DNA behavior within nanoparticle crystals is essential for understanding the programmability of DNA-linked nanoparticle systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Thermally Activated Formation of Reactive Lattice Oxygen in Titania on Nanoporous Gold

Nanoporous gold modified by atomic layer deposition of titania was employed as a model, inverse supported precious metal catalyst to explore the oxidative reactivity of Au/TiO 2 catalysts. The catalyst material is active for oxidation of CO using O from the titania lattice, even at low temperatures. The reactive lattice oxygen available for oxidative reactions was formed by thermal activation, with the total oxidative reactivity of the material showing a strong dependence on the annealing temperature prior to CO exposure. Finally, reduction of the titania via CO oxidation can be reversed under relatively mild conditions by exposure to O 2 , presenting a viable mechanism for CO oxidation in steady state catalytic conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Thiophene Derivatives on Gold and Molecular Dissociation Processes

Here, we report a systematic study of thiophene derivatives on gold surfaces. These molecules are of interest in molecular electronics, and the characracteristics of the thiophene–electrode interface in devices needs to be understood as it affects electron transport characteristics. Some experiments indicated S–C bond scission in contact with metals resulting in disruption of the $π$-electron system that affects charge transport, which would also be affected by presence of split-off chemisorbed sulfur. We explored this dissociation aspect by photoemission for the case of monocrystalline Au(111) surfaces and Au films grown on mica for a series of polythiophenes molecules ( n T, n = 1–4, 6) as well as for α,ω-diquaterthiophene (DH 4 T) and dihexylsexithiophene (DH6T). The S 2p X-ray photoelectron spectroscopy peaks are found to have complex line shapes corresponding to S atoms with different core level binding energies (CLBE). Density functional theory calculations of adsorption energies and CLBEs were performed for various adsorption configurations of thiophene on a perfect Au(111) plane and for comparison, calculations were also performed for bithiophene, terthiophene, alkenethiol, alkenethiol chain, and a broken thiophene related metallocycle, incorporating an Au adatom and an S atom. On the basis of these results we relate the different contributions to the S 2p peak to intact molecules on different adsorption sites and broken molecules. Calculations in particular show that the CLBEs for intact thiophene (1T) can be the same as for the alkene and alkanethiol cases as opposed to usual assumptions in the literature. The existence of intact thiophenes is confirmed by the presence of clear $π$ resonance peaks in the near edge X-ray fine structure (NEXAFS) spectra. Spontaneous dissociation appears to a variable extent in different samples, and we tentatively relate this to the presence of a more or less large number of steps and defects sites. X-ray induced beam damage was investigated for 1T and 3T using an intense synchrotron beam of 260 eV photons, and showed changes in the S 2p spectra related to S–C bond scission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Theoretical Investigation of Relaxation Dynamics in Au 38 (SH) 24 Thiolate-Protected Gold Nanoclusters

A subtle change in the electronic structure of thiolate protected noble nanoparticles can result distinctive relaxation dynamics. Thus, relaxation dynamics investigations on different sizes and structures of thiolate protected gold nanocluster will reveal their physical and chemical properties for further development of catalytic applications. In this work, we performed nonradiative relaxation dynamics of the Au 38 (SH) 24 nanocluster theoretically to describe electron relaxation dynamics. The core and higher excited states involving semiring motifs lying in the energy range 0.00-2.01 eV are investigated using the time-dependent density functional theory (TDDFT). The surface hopping method with decoherence correction, augmented with a real-time approach to DFT technique is used to assess the quantum dynamics. The Au 23 core relaxations were found to be in a picosecond timescale in the range of 2.0 – 8.2 ps. The higher excited states that consist of core- semiring mixed or semiring states gave ultrafast decay time constants in the range of 0.6 - 4.9 ps. Our calculations predicted that the slowest individual state decay of S11 or the slowest combined S 11 -S 12 , S 1 -S 2 -S 6 -S 7 and S 4 -S 5 - S 9 -S 10 decay involves intracore relaxations. The analysis of the phonon spectral densities and the ground state vibrational frequencies suggested that the low frequency (25 cm -1 ) coherent phonon emission reported experimentally could be the bending of the biicosahedral Au 23 core or the “fan blade twisting” mode of two icosahedral units occurring in a similar frequency range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tip-Enhanced Raman Nanospectroscopy of Smooth Spherical Gold Nanoparticles

We record nanoscale-resolved chemical images of thiobenzonitrile (TBN)-functionalized smooth gold nanospheres on silicon via tip-enhanced Raman (TER) nano-spectroscopy. The recorded images trace the nascence of the familiar doughnut-shaped scattering profile of nanoparticles on silicon at its origin (the particle surface), which appears as a horseshoe-shaped scattering pattern under our experimental conditions. The local optical field maps are in agreement with their simulated finite-difference time-domain analogues. Analysis of the recorded spectra with the aid of ab initio molecular dynamics-based Raman spectral simulations further suggests that optical rectification and molecular charging take place throughout the course of atomic force microscopy-based TER nanoscale chemical imaging.

Bhattarai, Ashish↗
DOE OSTI2022

Binary Superlattices of Gold Nanoparticles in Two Dimensions

Here, we have created two-dimensional (2D) binary superlattices by cocrystallizing gold nanoparticles (AuNPs) of two distinct sizes into √3 x √3 and 2 x 2 complex binary superlattices, derived from the hexagonal structures of the single components. The building blocks of these binary systems are AuNPs that are functionalized with different chain lengths of poly(ethylene glycol) (PEG). The assembly of these functionalized NPs at the air–water interface is driven by the presence of salt, causing PEG-AuNPs to migrate to the aqueous surface and assemble into a crystalline lattice. We have used liquid surface X-ray reflectivity (XR) and grazing incidence small-angle X-ray scattering (GISAXS) to examine the assembly and crystallization at the liquid interface.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Predicted Structures of the Active Sites Responsible for the Improved Reduction of Carbon Dioxide by Gold Nanoparticles

Gold (Au) nanoparticles (NPs) are known experimentally to reduce carbon dioxide (CO 2 ) to carbon monoxide (CO), with far superior performance to Au foils. To obtain guidance in designing improved CO 2 catalysts, we want to understand the nature of the active sites on Au NPs. Here, we employed multiscale atomistic simulations to computationally synthesize and characterize a 10 nm thick Au NP on a carbon nanotube (CNT) support, and then we located active sites from quantum mechanics (QM) calculations on 269 randomly selected sites. The standard scaling relation is that the formation energy of *COOH (ΔE*COOH) is proportional to the binding energy of *CO (Ebinding*CO); therefore, decreasing ΔE*COOH to boost the CO 2 reduction reaction (CO 2 RR) causes an increase of Ebinding*CO that retards CO 2 RR. We show that the NPs have superior CO 2 RR because there are many sites at the twin boundaries that significantly break this scaling relation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗