Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Peptoid-based chelating ligands for selective metal chelation

The present disclosure provides peptoid-based chelating ligands, corresponding cyclic peptoids, and methods of making thereof. Functional groups may be tailored for high metal binding affinity and selectivity. The side chains of a cyclic peptoid according to the present disclosure may be selected based on, for example, high affinity for actinide or other metal ions, selectivity for actinide or other metal ions, the ability to recover a metal once it is bound to the peptoid, and whether the overall peptoid should be hydrophobic or hydrophilic. Unlike siderophores, peptoid-based chelating ligands of the present disclosure are not readily hydrolyzed under physiological conditions. Therefore, peptoid-based chelating ligands may be, for example, used to treat actinide (e.g., iron and lead) poisoning in vivo. Moreover, peptoid-based chelating ligands of the present disclosure may be used for medical imaging, chelation therapy, drug delivery, and separation technologies, for example.

Williams, Robert F.↗
DOE OSTI2026

Affinity and Treatment of LDR Organics in Low Activity Waste by Cementitious Materials – 26109

The physiochemical interactions between organic contaminants, minerals, and polymer additives in grout/cementitious materials are being identified. This research supports a proposed Resource Conservation and Recovery Act (RCRA) treatment variance relevant to the Land Disposal Restriction (LDR) organics present in Hanford tank waste. It provides the technical basis to address the aspects documented by the Environmental Protection Agency in a draft memo necessary to establish that organics can be immobilized/stabilized in a cementitious matrix. The organic species may interact with cementitious minerals, including slag, fly ash, cement, and other components/dopants like activated carbon. A list of 132 reasonably expected LDR organics associated with Hanford tank waste (RPP-RPT-63493, Rev 1a) was screened by functional groups, octanol-water partitioning coefficients, and detection frequency in Hanford tank waste samples. A subset of 15 compounds spanning the identified properties was tested using sorption and leachate tests. These compounds were subjected to traditional batch sorption tests and leaching tests on/from Cast Stone cementitious material with and without activated carbon (a potential organic adsorption additive). The interactions between organic compounds were observed in traditional batch sorption and modified TCLP leachate tests for surrogate Cast Stone material with and without activated carbon addition. Specifically, phthalic acid (negatively charged) and 4-chloroaniline (polar) sorbed strongly to unmodified Cast Stone, while a group of three phenolic compounds (2,4,6-Trichlorophenol, Pentachlorophenol, o-Cresol) sorbed to and were retained by Cast Stone with a 1% activated carbon amendment. Mixtures of these compounds demonstrated visible retention of the organics within the matrix with a quantifiable affinity of the organics to the cement. This novel testing supports the notion that organics within Hanford tank waste would be retained onto the cement phase with the addition of simple materials easily added to the formulation as part of the treatment process. To further provide additional support to this claim, models employing Flory-Huggins theory in conjunction with macromolecular and organic molecule solubility parameters and species activity coefficients are being utilized to better understand these interactions. Within this context, Van Krevelen (VK) and Hansen organic and polymer solubility parameters were used to inform the Flory-Huggins interaction parameter, allowing for a quantifiable method of evaluating polymer-solvent compatibility and, by extension, interactions with proposed binding additives (e.g., activated carbon). These models and measurement should test the hypothesis for our systems understanding and applicability of Flory-Huggins theory, and whether the prediction of organics in the polymer phase versus the aqueous phase can be confidently made using this strategy. The estimation of the organic molecular activity coefficient in these high salt-saturated aqueous systems is another factor that will be assessed. This project aims to predict and understand complicated organic interactions in these heterogenous systems, guiding optimal treatment and stabilization methodologies.

Jolin, Will [Savannah River National Laboratory (S↗
DOE OSTI2022

Structure functions from renormalization group improved small x evolution

Abstract We perform the fit to the structure function $$F_2$$ F 2 data from HERA including terms due to the resummation at small x . The equation for the unintegrated gluon density is solved, previously established within the renormalization group improved small x framework. We find very good description of the structure function $$F_2$$ F 2 and its charm component $$F_2^c$$ F 2 c . The resulting unintegrated gluon density is found to be consistent with the calculations based on similar approaches available in the literature, with only slightly higher intercept value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Non-coding RNAs: update on mechanisms and therapeutic targets from the ESC Working Groups of Myocardial Function and Cellular Biology of the Heart

Abstract Vast parts of mammalian genomes are actively transcribed, predominantly giving rise to non-coding RNA (ncRNA) transcripts including microRNAs, long ncRNAs, and circular RNAs among others. Contrary to previous opinions that most of these RNAs are non-functional molecules, they are now recognized as critical regulators of many physiological and pathological processes including those of the cardiovascular system. The discovery of functional ncRNAs has opened up new research avenues aiming at understanding ncRNA-related disease mechanisms as well as exploiting them as novel therapeutics in cardiovascular therapy. In this review, we give an update on the current progress in ncRNA research, particularly focusing on cardiovascular physiological and disease processes, which are under current investigation at the ESC Working Groups of Myocardial Function and Cellular Biology of the Heart. This includes a range of topics such as extracellular vesicle-mediated communication, neurohormonal regulation, inflammation, cardiac remodelling, cardio-oncology as well as cardiac development and regeneration, collectively highlighting the wide-spread involvement and importance of ncRNAs in the cardiovascular system.

Bär, Christian↗
DOE OSTI2025

Five-point functions and the permutation group 𝑆 5

Five-point functions and five-body wave functions play an important role in many areas of nuclear and particle physics, e.g., in 2 →3 scattering processes, in the five-gluon vertex, or in the study of pentaquarks. In this work we consider the permutation group 𝑆 5 to facilitate the description of such objects. We work out the multiplets transforming under irreducible representations of 𝑆 5 and provide compact formulas allowing one to cast the permutations of an object 𝑓 12345 into combinations with definite permutation symmetry. We also give the explicit expressions for the irreducible multiplet products. We consider several practical applications as examples: We arrange the four-momenta and Lorentz invariants of a five-point function into the multiplet structure, we work out the color tensors of the five-gluon vertex in the multiplet notation, and we discuss applications for five-body wave functions like those of pentaquarks.

Bethe-Salpeter equation↗
DOE OSTI2020

Influence of Terminal Carboxyl Groups on the Structure and Reactivity of Functionalized m-Carboranethiolate Self-Assembled Monolayers

The structure and function of self-assembled monolayers (SAMs) at the nanoscale are determined by the steric and electronic effects of their building blocks. Carboranethiol molecules form pristine monolayers that provide tunable two-dimensional systems to probe lateral and interfacial interactions. Additional ω-functionality, such as carboxyl groups, can be introduced to change the properties of the exposed surfaces. Here, two geometrically similar isomeric m-carborane analogues of m-mercaptobenzoic acid, 1-COOH-7-SH-1,7-C 2 B 10 H 10 and racem-1-COOH-9-SH-1,7-C 2 B 10 H 10 , are characterized and their SAMs on Au{111} are examined. The latter isomer belongs to the rare group of chiral cage molecules and becomes, to our knowledge, the first example assembled on Au{111}. Although different in symmetry, molecules of both isomers assemble into similar hexagonal surface patterns. The nearest-neighbor spacing of 8.4 ± 0.4 Å is larger than that of non-carboxylated isomers, consistent with the increased steric demands of the carboxyl groups. Computational modeling reproduced this spacing and suggests a tilt relative to the surface normal. However, tilt domains are not observed experimentally, suggesting the presence of strong lateral interactions. Analyses of the influence of the functional groups through the pseudo-aromatic m-carborane skeleton showed that the thiol group attached to either carbon or boron atoms increases the carboxyl group acidity in solution. In contrast, the acidity of the exposed carboxyl group in the SAMs decreases upon surface attachment; computational analyses suggest that the driving force of this shift is the dielectric of the environment in the monolayer as a result of confined intermolecular interactions, proximity to the Au surface, and partial desolvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Improved Operational Stability of Blue Phosphorescent OLEDs by Functionalizing Phenyl‐Carbene Groups of Tetradentate Pt(II) Complexes

Abstract Stable and efficient deep‐blue organic light‐emitting diodes (OLEDs) are in high demand for display and lighting applications but are rarely reported due to their poor operational lifetimes. Herein, the study designs and synthesizes two novel N ‐heterocyclic carbene (NHC)‐based tetradentate Pt(II) complexes PtON5‐dtb and PtON5N‐dtb, and thoroughly investigate their electrochemical and photophysical properties. Functionalization of the NHC moieties can increase the metal‐to‐ligand charge transfer ( 1/3 MLCT) characters in their lowest triplet excited‐states, resulting in significantly shortened photoluminescent lifetimes and remarkably improved device performance. A deep blue OLED employing PtON5N‐dtb as an emitter exhibits a narrow spectral bandwidth with a full‐width at half maximum (FWHM) of 30 nm and a CIE y value of 0.17 and demonstrates a maximum external quantum efficiency (EQE) of 20.4% with a small efficiency roll‐off, which maintains a high EQE of 18.5% at 1000 cd m −2 . Moreover, the deep blue OLED also realizes a long‐measured operational lifetime LT 90 (time to 90% of the initial luminance) of 71 hours with an initial brightness of 1134 cd m −2 , corresponding to an estimated device lifetime LT 90 of 85 h at 1000 cd m −2 . This represented an eightfold lifetime improvement for PtON5N‐dtb‐based deep blue OLED compared to PtON7‐dtb in the same device setting.

Li, Guijie↗
DOE OSTI2023

Evolutionary lineage explains trait variation among 75 coexisting grass species

Summary Evolutionary history plays a key role driving patterns of trait variation across plant species. For scaling and modeling purposes, grass species are typically organized into C 3 vs C 4 plant functional types (PFTs). Plant functional type groupings may obscure important functional differences among species. Rather, grouping grasses by evolutionary lineage may better represent grass functional diversity. We measured 11 structural and physiological traits in situ from 75 grass species within the North American tallgrass prairie. We tested whether traits differed significantly among photosynthetic pathways or lineages (tribe) in annual and perennial grass species. Critically, we found evidence that grass traits varied among lineages, including independent origins of C 4 photosynthesis. Using a rigorous model selection approach, tribe was included in the top models for five of nine traits for perennial species. Tribes were separable in a multivariate and phylogenetically controlled analysis of traits, owing to coordination of important structural and ecophysiological characteristics. Our findings suggest grouping grass species by photosynthetic pathway overlooks variation in several functional traits, particularly for C 4 species. These results indicate that further assessment of lineage‐based differences at other sites and across other grass species distributions may improve representation of C 4 species in trait comparison analyses and modeling investigations.

Donnelly, Ryan C.↗
DOE OSTI2022

Illuminating the pathways to carbon liberation: a systems approach to characterizing the consequential unknowns of carbon transformation and loss from thawing permafrost peatlands (Final Report)

The IsoGenie3 Project delivered new systems-level insights into carbon cycling in thawing permafrost landscapes, with an emphasis on methane and carbon dioxide emissions. From >200 samples from the site collected over a decade, co-analyzed for geochemistry and microbiology, the team recovered ~1,500 assembled microbial genomes and ~1,900 viral population genomes, revealing appreciable genetic novelty - from a new highly abundant bacterial phylum, to novel methane consumers and their activities, to rampant viral novelty. IsoGenie3 linked these organisms to carbon compound transformations (which define the cycling of organic matter in soils, and the loss of the greenhouse gases carbon dioxide and methane), and saw that the microbes at each stage of permafrost thaw had different genetic potential to degrade categories of compounds, expressed that genetic potential differently, and actually transformed carbon compounds into greenhouse gases in different ways. IsoGenie 3 identified that some of the thaw-stage differences were due to plant-microbiome relationships; the plant species across the thaw gradient contributed different carbon compounds into the soil, and hosted distinct microbiota (differing among parts of plants as well as species). Lastly, microbes in the saturated post-thaw conditions appeared likely to contribute to the mobilization and toxification of mercury released during thaw. In parallel with ongoing field sampling and analysis, hypotheses arising from field observations were tested via lab incubation experiments. When communities are taken out of their native habitats, they behave differently, and the team first rigorously quantified the magnitude of this effect on microbiome composition and functional capacity, organic matter composition, and gas production; overall the main system processes were maintained in the lab incubations under the conditions tested. Further, the microbial data could inform geochemical reaction network models of those processes. Then, the team ran experiments with additions of compounds, varying temperature, and “live” vs. “dead” peat (the latter having been gamma irradiated, with a few additional variants to control for methodological artifacts). From these, we (a) determined the importance of plant-derived soluble phenolic compounds in bogs’ extraordinary recalcitrance of organic matter, and carbon gas emissions skewed to carbon dioxide; (b) proposed an abiotic ‘tanning’ mechanism, which could contribute to Sphagnum’s inhibitory effect on anaerobic decomposition through alteration of N availability. IsoGenie3 illuminated longer-term and landscape-scale interactions of permafrost thaw and carbon cycling, advancing knowledge of the drivers of methane dynamics not only across in the permafrost-associated peatland (where hydrology and plant communities dictate microbiomes) but also their interconnected lakes (where sediment carbon quality and resident microbiota are determined by position within lake, and lake features). By leveraging observations of site methane dynamics extending well before this project, the team was able to construct a 44-year portrait of the interplay of permafrost thaw, hydrology, vegetation dynamics, and carbon gas emissions, and the doubling of the fully-thawed fens over this time. From the detailed study of this focal site, IsoGenie3 also aimed to improve model representation of these kinds of sites and processes. To improve predictions of methane transformations, we incorporated acetate and isotope dynamics into the ‘DNDC’ biogeochemistry model. In addition, recovered genomes were grouped into ‘functional groups’, i.e. the genomes that perform a specific function of interest, then used to parameterize maximum growth rate and optimum growth temperature (via signatures in their sequence composition) for the BioCrunch model. The BioCrunch model was then in turn used to test the impact of increasing functional resolution of the microbes, on the carbon gas emissions. Lastly for modeling, the ecosys model was parameterized from the microbial and other data, and used to evaluate drivers of e.g. change in methane emissions. Finally, this project also led to the development of a range of new methods and tools, a new metric of organic matter decomposability, as well as a graph-database solution to multidisciplinary data storage and querying. This project’s ongoing analyses at our focal site also contributed to broader advancements in understanding elements of genetic plasticity and methane metabolism, climate change microbiology and community assembly, global peatland geochemistry and Arctic lakes’ roles in climate feedbacks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO) 5 Cl to form complexes of the type Re(bpy)(CO) 3 Cl, which are related to known catalysts for CO 2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO 2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO 2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. So a conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

14 SOLAR ENERGY↗
NASA NTRS1990

Correlation functions for pairs and groups of galaxies

There are many studies on the correlation functions of galaxies, of clusters of galaxies, even of superclusters (e.g., Groth and Peebles 1977; Davies and Peebles 1983; Kalinkov and Kuneva 1985, 1986; Bahcall 1988 and references therein) but not so many on pairs and groups of galaxies. Results of the calculations of two-point correlation fuctions for some catalogs of pairs and groups of galaxies are given. It is assumed that the distances to pairs and groups of galaxies are given by their mean redshifts according to R = sigma (sup n, sub i-1) V sub i/nH (sub 0), where n is the number of galaxies in the system and H sub 0 = 100 km s(exp -1) Mpc(exp -1).

Kalinkov, M.↗
DOE OSTI2021

Critical Role of the Interfacial Layer in Associating Polymers with Microphase Separation

Polymers with dynamic (transient) bonds, often called associating polymers, have been attracting significant attention in recent years due to their unique viscoelastic properties, self-healing ability, and recyclability. Nevertheless, understanding the mechanisms and the factors controlling their macroscopic properties remains limited due to the higher complexity introduced by the dynamic bonds. Here in this study, small-angle X-ray scattering (SAXS), broadband dielectric spectroscopy (BDS), and rheology were applied to unravel the structure and dynamics of telechelic associating polymers with different molecular weights. SAXS measurements revealed phase separation of the functional end groups with an average cluster size of ~2–3 nm and the distance between clusters controlled by the chain length. Borrowing the interfacial layer model analysis of BDS data from the polymer nanocomposite field, we demonstrated the presence of an interfacial polymer layer with a thickness of ~0.7–0.9 nm surrounding these clusters. Rheological measurements showed quantitatively that the presence of the interfacial layer significantly alters the viscoelastic behavior of these materials, indicating the crucial role of the interfacial layer in defining the macroscopic mechanical properties of the studied telechelic materials. The presented results emphasize that phase separation of the functional groups in associating polymers leads to very significant changes of the viscoelastic properties, opening a promising avenue in the design of novel functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Kinetics of the functionalization of mesoporous silica nanoparticles: Implications on surface group distributions, adsorption and catalysis

The post-synthesis functionalization (grafting) kinetics of mesoporous silica nanoparticles (MSN) with organotrimethoxysilanes (R-TMS) is studied via solution 1 H NMR spectroscopy. The process involves a rapid adsorption/ desorption pre-equilibrium followed by reaction of R-TMS with surface silanols. Grafting rates are affected by the functional group in R-TMS. For example, the grafting rate of aminopropyl-trimethoxysilane (AP-TMS) is one order of magnitude higher than other R-TMS. High concentrations of AP-TMS result in substrate-inhibition kinetics, likely due to steric and mobility constraints for reactant alignment at high coverage. The higher rates of AP-TMS grafting indicate a catalytic effect of amine groups. This effect depends on the amine’s basicity and can be used to control the grafting rates and degree of condensation of other R-TMS. Adjusting the rate of mercaptopropyl-trimethoxysilane (MP-TMS) grafting using amines gives MP-MSN materials of varying adsorptive and catalytic activities, illustrated by Pd scavenging experiments and use of Pd@MP-MSN as catalysts for a Suzuki-Miyaura cross-coupling reaction.

36 MATERIALS SCIENCE↗
NASA NTRS1997

Premorbid determinants of left ventricular dysfunction in a novel model of gradually induced pressure overload in the adult canine

BACKGROUND: When a pressure overload is placed on the left ventricle, some patients develop relatively modest hypertrophy whereas others develop extensive hypertrophy. Likewise, the occurrence of contractile dysfunction also is variable. The cause of this heterogeneity is not well understood. METHODS AND RESULTS: We recently developed a model of gradual proximal aortic constriction in the adult canine that mimicked the heterogeneity of the hypertrophic response seen in humans. We hypothesized that differences in outcome were related to differences present before banding. Fifteen animals were studied initially. Ten developed left ventricular dysfunction (dys group). Five dogs maintained normal function (nl group). At baseline, the nl group had a lower mean systolic wall stress (96 +/- 9 kdyne/cm2; dys group, 156 +/- 7 kdyne/cm2; P < .0002) and greater relative left ventricular mass (left ventricular weight [g]/body wt [kg], 5.1 +/- 0.36; dys group, 3.9 +/- 0.26; P < .02). On the basis of differences in mean systolic wall stress at baseline, we predicted outcome in the next 28 dogs by using a cutoff of 115 kdyne/cm2. Eighteen of 20 dogs with baseline mean systolic stress > 115 kdyne/cm2 developed dysfunction whereas 6 of 8 dogs with resting stress < or = 115 kdyne/cm2 maintained normal function. CONCLUSIONS: We conclude that this canine model mimicked the heterogeneous hypertrophic response seen in humans. In the group that eventually developed dysfunction there was less cardiac mass despite 60% higher wall stress at baseline, suggesting a different set point for regulating myocardial growth in the two groups.

Non-NASA Center↗