Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Final Report - Durable Catalysts for Fuel Cell Protection during Transient Conditions

The objective of this project was to develop catalysts that will enable proton exchange membranes (PEM) fuel cell systems to weather the damaging conditions in the fuel cell at voltages beyond the thermodynamic stability of water during the transient periods of start-up/shut-down and fuel starvation. Such catalysts are required to make it possible for the fuel cell to satisfy the 2015 DOE targets for performance and durability. The project addressed a key issue of importance for successful transition of PEM fuel cell technology from development to pre-commercial phase. This issue is the failure of the catalyst and the other thermodynamically unstable membrane electrode assembly (MEA) components during start-up/shut-down and local fuel starvation at the anode, commonly referred to as transient conditions. During these periods the electrodes can reach potentials higher than the usual 1.23V upper limit during normal operation. The most logical way to minimize the damage from such transient events is to minimize the potential seen by the electrodes. At lower positive potentials, increased stability of the catalysts themselves and reduced degradation of the other MEA components is expected.

30 DIRECT ENERGY CONVERSION↗

Fuel Cell Development for NASA's Human Exploration Program: Benchmarking with "The Hydrogen Economy"

The theoretically high efficiency and low temperature operation of hydrogen-oxygen fuel cells has motivated them to be the subject of much study since their invention in the 19th Century, but their relatively high life cycle costs kept them as a "solution in search of a problem" for many years. The first problem for which fuel cells presented a truly cost effective solution was that of providing a power source for NASA's human spaceflight vehicles in the 1960 s. NASA thus invested, and continues to invest, in the development of fuel cell power plants for this application. This development program continues to place its highest priorities on requirements for minimum system mass and maximum durability and reliability. These priorities drive fuel cell power plant design decisions at all levels, even that of catalyst support. However, since the mid-1990's, prospective environmental regulations have driven increased governmental and industrial interest in "green power" and the "Hydrogen Economy." This has in turn stimulated greatly increased investment in fuel cell development for a variety of commercial applications. This investment is bringing about notable advances in fuel cell technology, but, as these development efforts place their highest priority on requirements for minimum life cycle cost and field safety, these advances are yielding design solutions quite different at almost every level from those needed for spacecraft applications. This environment thus presents both opportunities and challenges for NASA's Human Exploration Program

Scott, John H.↗

The JPL Direct Methanol Liquid-feed PEM Fuel Cell

Recently, there has been a breakthrough in fuel cell technology in the Energy Storage Systems Group at the Jet Propulsion Laboratory with the develpment of a direct methanol, liquid-feed, solid polymer electrolyte membrane (PEM) fuel cell... The methanol liquid-feed, solid polymer electrolyte (PEM) design has numerous system level advantages over the gas-feed design. These include:...

fuel cells methanol pem methanol water↗

Durable, Low-cost, Improved Fuel Cell Membranes

The development of low cost, durable membranes and membranes electrode assemblies (MEAs) that operate under reduced relative humidity (RH) conditions remain a critical challenge for the successful introduction of fuel cells into mass markets. It was the goal of the team lead by Arkema, Inc. to address these shortages. Thus, this project addresses the following technical barriers from the fuel cells section of the Hydrogen Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan: (A) Durability (B) Cost Arkema’s approach consisted of using blends of polyvinylidenefluoride (PVDF) and proprietary sulfonated polyelectrolytes. In the traditional approach to polyelectrolytes for proton exchange membranes (PEM), all the required properties are “packaged” in one macromolecule. The properties of interest include proton conductivity, mechanical properties, durability, and water/gas transport. This is the case, for example, for perfluorosulfonic acid-containing (PFSA) membranes. However, the cost of these materials is high, largely due to the complexity and the number of steps involved in their synthesis. In addition, they suffer other shortcomings such as mediocre mechanical properties and insufficient durability for some applications. The strength and originality of Arkema’s approach lies in the decoupling of ion conductivity from the other requirements. Kynar® PVDF provides an exceptional combination of properties that make it ideally suited for a membrane matrix (Kynar® is a registered trademark of Arkema Inc.). It exhibits outstanding chemical resistance in highly oxidative and acidic environments. In work with a prior grant, a membrane known as M41 was developed by Arkema. M41 had many of the properties needed for a high performance PEM, but had a significant deficiency in conductivity at low RH. In the first phase of this work, the processing parameters of M41 were explored as a means to increase its proton conductivity. Optimizing the processing of M41 was found to increase its proton conductivity by almost an order of magnitude at 50% RH. Characterization of the membrane morphology with Karren More at Oak Ridge National Laboratory showed that the membrane morphology was complex. This technology platform was dubbed M43 and was used as a baseline in the majority of the work on the project. Although its performance was superior to M41, M43 still showed proton conductivity an order of magnitude lower than that of a PFSA membrane at 50% RH. The MEA performance of M43 could be increased by reducing the thickness from 1 to 0.6 mils. However, the performance of the thinner M43 still did not match that of a PFSA membrane.

30 DIRECT ENERGY CONVERSION↗

Stress-life interrelationships associated with alkaline fuel cells

A review is presented concerning the interrelationships between applied stress and the expected service life of alkaline fuel cells. Only the physical, chemical, and electrochemical phenomena that take place within the fuel cell stack portion of an overall fuel cell system will be discussed. A brief review will be given covering the significant improvements in performance and life over the past two decades as well as summarizing the more recent advances in understanding which can be used to predict the performance and life characteristics of fuel cell systems that have yet to be built.

Thaller, Lawrence H.↗

Stress-life interrelationships associated with alkaline fuel cells

A review is presented concerning the interrelationships between applied stress and the expected service life of alkaline fuel cells. Only the physical, chemical, and electrochemical phenomena that take place within the fuel cell stack portion of an overall fuel cell system will be discussed. A brief review will be given covering the significant improvements in performance and life over the past two decades as well as summarizing the more recent advances in understanding which can be used to predict the performance and life characteristics of fuel cell systems that have yet to be built.

Thaller, Lawrence H.↗

Development of an alkaline fuel cell subsystem

A two task program was initiated to develop advanced fuel cell components which could be assembled into an alkaline power section for the Space Station Prototype (SSP) fuel cell subsystem. The first task was to establish a preliminary SSP power section design to be representative of the 200 cell Space Station power section. The second task was to conduct tooling and fabrication trials and fabrication of selected cell stack components. A lightweight, reliable cell stack design suitable for the SSP regenerative fuel cell power plant was completed. The design meets NASA's preliminary requirements for future multikilowatt Space Station missions. Cell stack component fabrication and tooling trials demonstrated cell components of the SSP stack design of the 1.0 sq ft area can be manufactured using techniques and methods previously evaluated and developed.

Source record↗

Cerium migration during PEM fuel cell assembly and operation

Cerium migration between PEM fuel cell components is influenced by potential-driven mobility, ionic diffusion, and gradients in water content. These factors were investigated in ex situ experiments and in operating fuel cells. Potential-induced migration was measured ex situ in hydrated window cells. Cerium-containing MEAs were also fabricated and tested under ASTs. MEA disassembly and subsequent XRF analysis were used to observe rapid cerium migration during cell assembly and operation. During MEA hot pressing, humidification, and low RH operation at OCV, ionic diffusion causes uniform migration from the membrane into the catalyst layers. During high RH operation at OCV, in-plane cerium gradients arise due to variations in water content. These gradients may diminish the scavenging efficacy of cerium by reducing its proximity to generated radicals.

08 HYDROGEN↗

Sputter-deposited fuel cell membranes and electrodes

A method for preparing a membrane for use in a fuel cell membrane electrode assembly includes the steps of providing an electrolyte membrane, and sputter-depositing a catalyst onto the electrolyte membrane. The sputter-deposited catalyst may be applied to multiple sides of the electrolyte membrane. A method for forming an electrode for use in a fuel cell membrane electrode assembly includes the steps of obtaining a catalyst, obtaining a backing, and sputter-depositing the catalyst onto the backing. The membranes and electrodes are useful for assembling fuel cells that include an anode electrode, a cathode electrode, a fuel supply, and an electrolyte membrane, wherein the electrolyte membrane includes a sputter-deposited catalyst, and the sputter-deposited catalyst is effective for sustaining a voltage across a membrane electrode assembly in the fuel cell.

Narayanan, Sekharipuram R.↗

Fuel Cell Research at NASA GRC

An overview of NASA GRC (Glenn Research Center) initiatives and challenges in fuel cell technology. The research and development of fuel cells and regenerative fuel cell systems for a wide variety of applications, including earth-based and planetary aircraft, spacecraft, planetary surface power, and terrestrial use are discussed.

Perez-Davis, Marla E.↗

Machine learning-guided design of direct methanol fuel cells with a platinum group metal-free cathode

Direct methanol fuel cells (DMFCs) offer a promising solution for clean electricity generation, particularly in small electronics and remote auxiliary power units. However, optimizing their efficiency and performance is challenging due to the complex interactions between various factors. Here, we present a novel approach that integrates experiments with machine learning to model and predict the performance of these fuel cells using atomically dispersed platinum group metal (PGM)-free catalysts at the cathode. Further, our machine learning models, trained on diverse input parameters, allow for the comprehensive optimization of DMFC performance prior to fabrication and testing. Through extensive experimental validation, we demonstrate that this data-driven approach accurately predicts key performance metrics, such as maximum power output and polarization curves. By combining our models with interpretable game-theory methods, we provide deep insights into the factors governing fuel cell performance, ultimately paving the way for the design of scalable and efficient DMFC technologies.

25 ENERGY STORAGE↗

A rejuvenation process to enhance the durability of low Pt loaded polymer electrolyte membrane fuel cells

Here, an effective method to enhance the durability of polymer electrolyte membrane fuel cells (PEMFCs) is reported. PEMFC performance loss is mitigated by exposing the electrodes of fuel cells to dry nitrogen gas periodically at high temperature. This method extends the lifetime of fuel cells significantly compared to their non-treated counterparts. The impact of treatment temperature and exposure time on PEMFC durability is reported, using potential cycling accelerated stress tests. The enhanced durability is attributed to the suppression of “ionomer relaxation” that occurs under the nearly water saturated operating conditions of a PEMFC cathode.

30 DIRECT ENERGY CONVERSION↗

High power density fuel cell comprising an array of microchannels

A fuel cell according to one embodiment includes a porous electrolyte support structure defining an array of microchannels, the microchannels including fuel and oxidant microchannels; fuel electrodes formed along some of the microchannels; and oxidant electrodes formed along other of the microchannels. A method of making a fuel cell according to one embodiment includes forming an array of walls defining microchannels therebetween using at least one of molding, stamping, extrusion, injection and electrodeposition; processing the walls to make the walls porous, thereby creating a porous electrolyte support structure; forming anode electrodes along some of the microchannels; and forming cathode electrodes along other of the microchannels. Additional embodiments are also disclosed.

30 DIRECT ENERGY CONVERSION↗

Lab’s fuel cell knowledge tapped for surveys of catalyst technology

Two recent articles in Advanced Materials leverage Los Alamos’s extensive expertise in fuel cell technology. The articles, one by Los Alamos researchers and another with their external colleagues, survey current developments in precious-metal-free electrocatalysts and progress in understanding the main causes of their instability. The Laboratory’s role in developing fuel cells and hydrogen as an energy source goes back more than 40 years to when DOE awarded the first Fuel Cells for Transportation program to the Lab. Los Alamos continues as a core laboratory for the DOE Fuel Cell program—leading two DOE-awarded multi-lab consortia, which are focused on fuel cell performance and technology improvements.

30 DIRECT ENERGY CONVERSION↗

New insights in the polarization resistance of anode-supported solid oxide fuel cells with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 cathodes

In this study, the polarization resistance of the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) solid oxide fuel cell (SOFC) cathode was investigated by I-V sweep and electrochemcial impedance spectroscopy under a series of dc bias voltages and cathode environments (i.e. stagnant air, flowing air, and flowing oxygen) at temperatures from 550 to 750 °C. In flowing oxygen, the polarization resistance of the fuel cell decreased considerably with the applied current density. A linear relationship was observed between the ohmic-free over-potential and the logarithm of the current density of the fuel cell at all the measuring temperatures. In stagnant or flowing air, a new arc related to the molecular oxygen diffusion in the pores of the cathode was identified at high temperatures and high current densities. The magnitude of this arc increased with the applied current density due to the decreased oxygen partial pressure at the interface of the cathode and the electrolyte. It is found that the performance of the fuel cell in air is mainly determined by the oxygen diffusion process. Elimination of this process by flowing oxygen to the cathode improved the cell performance significantly. At 750 °C, for a fuel cell with a laser-deposited Sm 0.2 Ce 0.8 O 1.9 (SDC) interlayer, an extraordinarily high power density of 2.6 W cm -2 at 0.7 V was achieved in flowing oxygen, as a result of reduced ohmic and polarization resistance of the fuel cell, which were 0.06 Ω cm 2 and 0.03 Ω cm 2 , respectively. The results indicate that optimization of the microstructure of the LSCF cathode or adoption of a new cell design which can mitigate the diffusion problem in the cathode might enhance cell performance significantly.

concentration polarization↗