Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fourier Transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

The structure of Saturn's rings - Implications from the Voyager stellar occultation

A 100-m resolution has been obtained in the radial direction, across the entire Saturn ring system, in Voyager 2 photopolarimeter observations of Delta Scorpii as it was occulted by the rings. An automatic search with finite Fourier transforms located 13 density waves excited by resonances with Saturn's satellites. Although strong density waves can be easily located, no waves have been identified which have predicted torques/surface mass density values lower than 4 x 10 to the 16th cu cm/sec-squared. This suggests a limit of less than 100 waves to be found in the Saturn rings. Total ring mass is estimated as 5 x 10 to the -8th of the mass of Saturn. The power spectrum for the rings shows no dominant individual wavelengths. The majority of ring structures and most variance in ring optical depth are not explainable by currently entertained physical mechanisms.

Esposito, L. W.↗

A numerical model of acoustic choking. I - Shock free solutions

The phenomenon of acoustic choking in near sonic flows is investigated using the one-dimensional gasdynamic equations for an ideal gas. It is pointed out that this approach eliminates the need to make the classical small disturbance assumption. A finite difference scheme is elaborated to approximate these equations. Boundary conditions that correctly model the physics of the acoustics problems are chosen. The use of a fast Fourier transform routine allows the results to be compared with those obtained by using the conventional harmonic assumptions. Only solutions in which shocks have not fully developed are reported. Continuous solutions are sought, and these are compared with the Fubini solution and with certain results of Myers and Callegari (1977, 1978, 1979).

Walkington, N. J.↗

Symmetry-dependent broadening parameters for methane

Experimental results for the pressure-broadened linewidths gamma of methane are presented and compared with theoretical results. A solar Fourier transform spectrometer with spectral resolving power of about one million was used together with a 6-m base length multitraversal absorption cell. Pressures were determined to an accuracy of + or - 0.2 Torr by means of a capacitance manometer. The pressuring gases were N2, H2, and He. Results are presented for numerical averages of all linewidths corresponding to a given tetrahedral symmetry for J = 0-6. For all cases studied, gamma(E) is found to be substantially less than gamma(A), and gamma(A) is found to be near to, but significantly smaller than, gamma(F). Relative inelastic cross sections calculated for argon scattering from methane are compared with relative pressure-broadened linewidths measured in several experiments involving methane and other gases.

Fox, K.↗

Microprocessor implementation of an FFT for ionospheric VLF observations

A fast Fourier transform algorithm is implemented on a CMOS microprocessor for application to very low-frequency electric fields (less than 10 kHz) sensed on high-altitude scientific balloons. Two FFT's are calculated simultaneously by associating them with conjugate symmetric and conjugate antisymmetric results. One goal of the system was to detect spectral signatures associated with fast time variations present in natural signals such as whistlers and chorus. Although a full evaluation of the system was not possible for operational reasons, a measure of the system's success has been defined and evaluated.

Elvidge, J.↗

Effect of pressure on infrared-spectra of ice VII

The effect of pressure on the infrared spectra of H20 and D20 ice VII was studied at room temperature and at pressures between 2 and 15 GPa with a Fourier transform infrared spectrometer and a diamond anvil high pressure cell. Two librational modes, one bending mode, and various overtone bands are well resolved. The stretching modes, nu sub 1 and nu sub 3, are poorly resolved due to overlap with diamond window absorption. Differences between the spectra of H20 and D20 are discussed. Previously announced in STAR as N83-23671

Holzapfel, W. B.↗

Microwave holographic surface measurement of the Tidbinbilla 64-m antenna

The use of a holographic technique for accurately measuring the surface figure of the Tidbinbilla (Canberra, Australia) 64-m antenna is described. Described by Bennet et al. (1976) and Scott and Ryle (1977), the technique consists of measuring the complex far-field response of the antenna at a single frequency using a terrestrial, satellite-borne or celestial radiation source of small angular diameter. This two-dimensional pattern is then Fourier transformed to yield the complex illumination function across the antenna aperture; antenna surface deviations are manifested as phase fluctuations in this function. The speed and low cost of using the technique are real advantages where observing schedules with the telescopes are heavily subscribed. For the 64-m antenna, the unweighted rms surface deviation is found to be about 1.8 mm; when weighted by the radial amplitude taper it is about 1.1 mm. Two earlier estimates by other methods had yielded tolerances of about 1.2 mm rms and 1.1 mm rms. It is planned to use the technique to survey the 22-m antennas of the Australian Telescope accurate to approximately 0.1 mm rms near 10 Ghz.

Rahmat-Samii, Y.↗

Evaluation of the solar disk sextant concept

In this paper the viability of the solar disk sextant concept is evaluated, the optimum parameters required to carry out solar variability studies, which are the mission objectives, are derived. The experimental environment is first discussed, followed by the application of the finite Fourier transform definition (FFTD) to the detector array data. The requirements on the optical system are studied next. A computer program was carried out simulating solar edge data and FFTD. From this study, it is concluded that the required accuracy of measurement may be reached using currently available detector array technology, a focal ratio of the optical system in excess of 90, and an entrance aperture of 22 cm. The guidance error must be small enough to require no more than a correction rate of 0.1 arcsec/sec. All these conditions are well within current technology.

Chiu, H.-Y.↗

Digital processing considerations for extraction of ocean wave image spectra from raw synthetic aperture radar data

The digital processing requirements of several algorithms for extracting the spectrum of a detected synthetic aperture radar (SAR) image from the raw SAR data are described and compared. The most efficient algorithms for image spectrum extraction from raw SAR data appear to be those containing an intermediate image formation step. It is shown that a recently developed compact formulation of the image spectrum in terms of the raw data is computationally inefficient when evaluated directly, in comparison with the classical method where matched-filter image formation is an intermediate result. It is also shown that a proposed indirect procedure for digitally implementing the same compact formulation is somewhat more efficient than the classical matched-filtering approach. However, this indirect procedure includes the image formation process as part of the total algorithm. Indeed, the computational savings afforded by the indirect implementation are identical to those obtained in SAR image formation processing when the matched-filtering algorithm is replaced by the well-known 'dechirp-Fourier transform' technique. Furthermore, corrections to account for slant-to-ground range conversion, spherical earth, etc., are often best implemented in the image domain, making intermediate image formation a valuable processing feature.

Lahaie, I. J.↗

The 12 micron band of ethane - High-resolution laboratory analysis with candidate lines for infrared heterodyne searches

Attention is given to the results of a laboratory study of the v9 band of ethane at 12 microns, using both high resolution Fourier transform and diode laser absorption spectroscopy. The analysis to which about 2000 transitions in this band have been subjected includes the normal rotational terms as well as the higher order effects of l-doubling, l-resonance, internal rotation, and a Coriolis resonance with the 3v4 state. A model is presented for the v9 band which is able to reproduce the observed features to an accuracy of better than 0.001/cm, and a list has been compiled for v9 transitions, occurring near C-14O2 laser lines, that are good candidates for laser heterodyne searches.

Atakan, A. K.↗

Surface fluctuation spectroscopy - A novel technique for characterizing liquid interfaces

Surface fluctuation spectroscopy is a dynamic light scattering technique which involves the detection of thermal fluctuations (capillary waves) that cover every liquid interface. The advantages of this technique over conventional mechanical methods are discussed. The signal resolution and precision are improved by using a grating heterodyne technique coupled with a digital correlator. Detailed calculations showed that, for the measured power spectrum (the Fourier transform of the correlation function) to take the Lorentzian shape, it is necessary that certain optical conditions be met. These conditions are demonstrated with experimental data collected for ethanol at the ambient temperature as a function of the wave number. Once the optical parameters are adjusted correctly, the experimental results show excellent agreement with the literature values. It is also demonstrated that, using microcomputer technology, the entire system can be automated.

Shih, L. B.↗

Processing study of a high temperature adhesive

An adhesive-bonding process cycle study was performed for a polyimidesulphone. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are presented. These include the tape preparation, the use of a primer and press and simulated autoclave processing conditions. The polymer was characterized using Fourier transform infrared spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The lap shear strength of the adhesive was used to evaluate the effects of the bonding process variations.

Progar, D. J.↗

Atlas of high resolution infrared spectra of carbon dioxide

A long path, low pressure laboratory spectrum of carbon dioxide is presented for the spectral region 1830 to 2010/cm. The data were recorded at 0.01/cm resolution and room temperature with the Fourier transform spectrometer in the McMath solar telescope complex at Kitt Peak National Observatory. A list of positions and assignments is given for the 1038 lines observed in this region. A total of 30 bands and subbands of 12C1602, 13C1602, 12C160180, 12C160170, and 13C160180 were observed. Previously announced in STAR as N83-19598

Rinsland, C. P.↗

Single beam synthesis from thinned arrays

Radio astronomers have investigated spatial frequencies and their relationship to apertures with the objective to improve the resolution in radio observations. Welch (1965) has related Fourier transform theory developed for linear communications to aperture design problems, while Fakley (1959) has conducted a comparison between the performances of a time-averaged product array and an intraclass correlator. The present investigation is concerned with an approach which resembles very closely the intraclass correlator system considered by Fakley. A description is presented of a process whereby a thinned array of elements samples selected spatial frequencies from a uniform signal wave front incident on the array. The spatial frequencies are used to generate a set of synthetic spatial frequencies which behave as though they had been sampled by a fully filled array. Beam formation is obtained by summing the set of synthetic spatial frequencies.

Kaiser, J. A., Jr.↗

Galileo probe relay receiver - Acquisition and tracking

The probe-to-orbiter data link for the Jovian mission uses a Manchester encoded BPSK waveform which is demodulated by the Galileo probe relay receiver. Signal acquisition and tracking consists of a sequential probability ratio signal search, frequency acquisition with a least-squares estimator, wide-band phase lock acquisition, and a self-regulating mode control. A discrete Fourier transform serves as the basic mechanism to generate the algorithms that provide this orderly transition to phase tracking. Acquisition and tracking is addressed in this paper with emphasis on key algorithms, rationale, and theoretical/measured performance.

Von Der Embse, U. A.↗

Propagation of wide bandwidth signals through strongly turbulent ionized media

Analytic and numerical techniques are presented which directly address the problem of propagation of wide bandwidth signals through random ionized media. This work is applicable to the problems of satellite communication and space based radar observation through a disturbed ionospheric propagation channel that would result from a high altitude chemical release or nuclear detonation. An analytic solution is presented for the two-position, two-frequency mutual coherence function for spherical wave propagation in the strong scattering limit. This solution is used to derive simple expressions for the power impulse response function and to determine its relationship to the important parameters of decorrelation distance and coherence bandwidth which describe the disturbed propagation channel. Results for mean time delay and time delay jitter are presented and compared to direct simulation results and to other theoretical calculations. A numerical/analytical solution to the parabolic wave equation is presented in the form of a multiple phase-screen (MPS) propagation simulation. In this very general solution technique, the random medium is divided into a finite number of layers. The field fluctuation through each layer is obtained by replacing the layer by a centrally located thin phase-screen, whose statistical properties are determined from the statistics of the electron-density irregularities. The waveform then propagates from phase-screen to phase-screen via an exact solution to the Fresnel-Kirchnoff equation. For wide bandwidth waveforms, numerical solutions are obtained at a number of discrete frequencies centered about the carrier and then time-domain solutions are obtained by Fourier transform techniques. Detailed results are presented for a number of interesting cases including propagation of a 20 MHz bandwidth signal through a finite barium cloud at a carrier frequency of 100 MHz. One of the major uses of the MPS propagation simulation has been to provide realizations of the received signal after propagation through a disturbed channel. The MPS simulation obtains a general solution of the parabolic wave equation under both weak and strong scattering conditions. A second technique to directly obtain realizations of wide bandwidth waveforms is presented here. This technique is limited to the case of strong scattering but requires only a fraction of the computer resources needed for MPS signal generation. Detailed comparisons of the two signal generation techniques are presented.

Random Media↗

Resin Characterization in Cured Composite Materials

Molecular-level characterization of polymeric matrix resin in cured graphite-reinforced composite materials now determined through analysis of diffuse reflectance (DR) with Fourier Transform Infrared (FTIR) spectroscopy. Improved analytical method based on diffuse reflectance. DR/ FTIR technique successfully applied to analysis of several different composites and adhesives impossible to analyze by conventional methods.

Young, P. R.↗

Compensating for Range Migration in Synthetic-Aperture Radar

Correlation algorithm sharpens radar imagery. Azimuthal correlation of point-target response performed in frequency domain by fast Fourier transforms relatively efficient in arithmetic operations. Frequencydomain azimuthal response has simple form that enables correction for range migration made simultaneously and over wide area, thereby providing many picture elements.

Jin, M. Y.↗

Discoloration of Polyvinyl Butyral

Report presents results of study of discoloration in polyvinyl butyral (PVB). Clear PVB gradually turns yellowish brown in simulated-aging tests and outdoor environmental tests. Discoloration severely reduces solar-cell output. Using methods of modern analytical chemistry - transmission absorption, Fourier transform infrared absorption, atomic absorption spectroscopy, and scanning-electron microscopy - study uncovered major cause of yellowing.

Kim, Q.↗