SEARCH · Engineering Papers
Results for “FACE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A dislocation-based crystal viscoplasticity model with application to micro-engineered plasma-facing materials
We report materials developed with special surface architecture are shown here to be more resilient to the transient thermomechanical environments imposed by intermittent exposures to high heat flux thermal loading typical of long-pulse plasma transients. In an accompanying article, we present experimental results that show the relaxation of residual thermal stresses in micro-engineered W surfaces. A dislocation-based model is extended here within the framework of large deformation crystal plasticity. The model is applied to the deformation of single crystals, polycrystals, and micro-engineered surfaces composed of a uniform density of micro-pillars. The model is utilized to design tapered surface micro-pillar architecture, composed of a Re core and W coatings. Residual stresses generated by cyclic thermomechanical loading of these architectures show that the surface can be in a compressive stress state, following a short shakedown plasma exposure, thus mitigating surface fracture.
Custom-designed heat treatment simultaneously resolves multiple challenges facing 3D-printed single-crystal superalloys
Single-crystal Ni-based superalloys are currently the material of choice for turbine blade applications, especially with the emerging additive manufacturing (AM) that facilitates the manufacture/repair of these single crystals. This promising AM route, however, comes with a dilemma: in the fusion and heat affected zones after e-beam or laser induced melting, one needs a solutionizing annealing to relieve the residual stresses and homogenize the chemical/microstructure. The super-solvus solutionizing temperature is usually adopted from the protocol for the cast superalloys, which almost always causes recrystallization and stray grain growth, resulting in a polycrystalline microstructure and degrading the high-temperature mechanical performance. Here, in this paper, we demonstrate a custom-designed post-printing heat treatment to replace the conventional super-solvus one. The recovery and relatively low temperature diminish the driving force for recrystallization and the movement of stray grain boundaries, without suffocating the chemical/microstructural homogenization thanks to the narrow dendrite width and short element segregation distance. The optimal duration of the heat treatment is proposed to achieve atomic-diffusion mediated chemical homogenization while limiting γ'-particle coarsening in the interdendritic regions. Our strategy makes it practically feasible to resolve several bottleneck problems with one processing/treatment, removing a seemingly formidable obstacle to effective additive manufacturing of superalloy single crystal products.
HEAT simulation and IR data comparison for ST40 plasma-facing components
Not Available
Surface normal emissivity measurements in uncoated and oxidized B-coated plasma facing component materials in the long wavelength infrared spectrum
Accurate surface emissivity measurements are integral to the fidelity of the infrared thermography diagnostic evaluation in fusion reactors. The emissivities of ATJ TM graphite, Sigrafine® (R6510) graphite, and TZM alloy were measured as a function of temperature in accordance with the Contact Thermometer Method in the ASTM E1933 standard. Samples were heated resistively in a high-vacuum chamber, and the surface temperature was monitored using a surface thermocouple and a Telops long-wavelength infrared camera. The surfaces of Sigrafine® graphite and TZM alloy samples were coated with 10 nm and 20 nm layers of oxidized boron and were also measured in the uncoated condition. The thickness was assessed from measurement by a quartz crystal microbalance (QCM). ATJ TM graphite was uncoated. The measured emissivity of ATJ TM Graphite ranged from 0.82 to 0.83, uncoated Sigrafine® graphite ranged from 0.76 to 0.98, and uncoated TZM alloy ranged from 0.11 to 0.13. Oxidized boron coatings increased the emissivity of the TZM alloy to 0.18–0.23 but decreased the emissivity of Sigrafine® graphite to 0.56–0.66 for a 10 nm coating and to 0.65–0.74 for a 20 nm coating. In contrast to the expected blackbody radiance, the emissivity of uncoated Sigrafine® graphite and TZM alloy did not monotonically increase with temperature from 100 to 500 ℃.
The Sod gasdynamics problem as a tool for benchmarking face flux construction in the finite volume method
Not Available
Determining the activation energies and slip systems for dislocation nucleation in body-centered cubic mo and face-centered cubic Ni single crystals
Nanoindentation tests were performed on single crystals of Mo and Ni. The critical shear stress for the first pop-in was {approx}1/7 of the shear modulus in both crystals. The dependence of pop-in probability on load was understood in terms of a thermally activated dislocation nucleation process. Comparison of the activation energies suggests nucleation of full dislocations in Mo and partial dislocations in Ni. The activation energy analysis also offers information on the specific slip system on which dislocations are nucleated.
The face of epicardial and endocardial derived cells in zebrafish
Highlights: • Growth factors cocktails can to lead a heart regeneration in ex-vivo culture. • Ex-vivo cultures have permitted to characterize the cells with mobility capability. • Epicardial- and endocardial-derived cells can be expanded for months in culture. • Whole heart or cells culture open a new field of translational studies. Zebrafish hearts can regenerate through activation of growth factors and trans-differentiation of fibroblasts, epicardial, myocardial and endocardial cells, all positive for GATA4 during the process. A possible model of regeneration of the whole heart and the regenerating cells in ex-vivo culture is presented here by a stimulation of cocktail of growth factors. In ex-vivo growth-factors-supplemented culture the heart regeneration was quite complete without signs of fibrosis. Epicardial- and endocardial-derived cells have been analyzed by electron microscopy evidencing two main types: 1) larger/prismatic and 2) small/rounded. Type (1) showed on the surface protein-sculptures, while type(2) was smooth with sparse globular proteins. To confirm their nature we have contemporarily analyzed their proliferative capability and markers-positivity. The cells treated by growth factors have at least two-fold more proliferation with GATA4-positivity. The type (1) cell evidenced WT1+(marker of embryonic epicardium); the type (2) showed NFTA2+(marker of embryonic endocardium); whereas cTNT-cardiotroponin was negative. Under growth factors stimulation, GATA4+/WT1+ and GATA4+/NFTA2+ could be suitable candidates to be the cells with capability to move in/out of the tissue, probably by using their integrins, and it opens the possibility to have long term selected culture to future characterization.
Human adipose-derived mesenchymal stromal cells from face and abdomen undergo replicative senescence and loss of genetic integrity after long-term culture
Body fat depots are heterogeneous concerning their embryonic origin, structure, exposure to environmental stressors, and availability. Thus, investigating adipose-derived mesenchymal stromal cells (ASCs) from different sources is essential to standardization for future therapies. In vitro amplification is also critical because it may predispose cell senescence and mutations, reducing regenerative properties and safety. Here, we evaluated long-term culture of human facial ASCs (fASCs) and abdominal ASCs (aASCs) and showed that both met the criteria for MSCs characterization but presented differences in their immunophenotypic profile, and differentiation and clonogenic potentials. The abdominal tissue yielded more ASCs, and these had higher proliferative potential, but facial cells displayed fewer mitotic errors at higher passages. However, both cell types reduced clonal efficiency over time and entered replicative senescence around P12, as evaluated by progressive morphological alterations, reduced proliferative capacity, and SA-β-galactosidase expression. Loss of genetic integrity was detected by a higher proportion of cells showing nuclear alterations and γ-H2AX expression. Our findings indicate that the source of ASCs can substantially influence their phenotype and therefore should be carefully considered in future cell therapies, avoiding, however, long-term culture to ensure genetic stability.
Multidrug Efflux Pumps and the Two-Faced Janus of Substrates and Inhibitors
Antibiotics are miracle drugs that can cure infectious bacterial diseases. However, their utility is challenged by antibiotic resistant bacteria emerging in clinics and straining the modern medicine and our ways of life. Certain bacteria such as Gram-negative (Gram(- )) and Mycobacteriales species are intrinsically resistant to most clinical antibiotics and can further gain multidrug resistance through mutations and plasmid acquisition. These species stand out by the presence of an additional external lipidic membranes (the outer membrane, OM) that are composed of unique glycolipids. Although formidable, the OM is a passive permeability barrier that can reduce penetration of antibiotics but cannot affect intracellular steady-state concentrations of drugs. The two-membrane envelopes are further reinforced by active efflux transporters that expel antibiotics from cells against their concentration gradients. The major mechanism of antibiotic resistance in Gram(-) pathogens is the active efflux of drugs, which acts synergistically with the low permeability barrier of the OM and other mutational and plasmid-borne mechanisms of antibiotic resistance.
Nanopillar-based enhanced-fluorescence detection of sur-face-immobilized beryllium.
The unique properties associated with beryllium metal ensures the continued use in many industries despite the documented health and environmental risks. While engineered safeguards and personal protective equipment can reduce risks associated with working with the metal, it has been mandated by the Environmental Protection Agency (EPA) and Occupational Safety and Health Administration (OSHA) that the workplace air and surfaces must be monitored for toxic levels. While many methods have been developed to monitor levels down to the low μg/m 3 , the complexity and expense of these methods have driven the investigation into alternate methodologies. Herein, we use a combination of the previously developed fluorescence Be(II) ion detection reagent, 10-hydroxybenzo[h]quinoline (HBQ), with an optical field enhanced silicon nanopillar array, creating a new surface immobilized (si-HBQ) platform. The si-HBQ platform allows the positive control of the reagent for demonstrated reusability and a pillar diameter based tunable enhancement. Furthermore, native silicon nanopillars are overcoated with thin layers of porous silicon oxide to develop an analytical platform capable of a 0.0006 μg/L limit of detection (LOD) using sub-μL sample volumes. Additionally, we demonstrate a method to multiplex the introduction of the sample to the platform, with minimal 5.2% relative standard deviation (RSD) at 0.1 μg/L, to accommodate the potentially large number of samples needed to maintain industrial compliance. The minimal sample and reagent volumes and lack of complex and highly specific instrumentation, as well as positive control and reusability of traditionally consumable reagents, create a platform that is both accessible and economically advantageous.
Facing the Challenges of Borderline Oxidation State Assignments Using State-of-the-Art Computational Methods.
The oxidation state (OS) of metals and ligands in inorganic complexes may be defined by carefully curated rules, such as from IUPAC, or by computational procedures such as the effective oxidation state (EOS) or localized orbital bonding analysis (LOBA). Such definitions typically agree for systems with simple ionic bonding and innocent ligands but may disagree as the boundary between ionic and covalent bonds is approached, or as the role of ligand noninnocence becomes nontrivial, or high oxidation states of metals are supported by heavy dative bonding, and so on. This work systematically compares IUPAC, EOS, and LOBA across a series of complexes where OS assignment is challenging. These systems include high-valent transition metal oxides, transition metal complexes with noninnocent ligands such as dithiolate and nitrosyl, metal sulfur dioxide adducts, and two transition metal carbene complexes. The differences in OS assignment by the three methods are carefully discussed, demonstrating the synergy between EOS and LOBA. In addition, a clarity index for LOBA OS assignments is introduced that provides an indication of whether or not its predictions are close to the ionic-covalent boundary.