Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Error bounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Tight bound on coherent-state-based entanglement generation over lossy channels

The first stage of the hybrid quantum repeaters is entanglement generation based on transmission of pulses in coherent states over a lossy channel. Protocols to make entanglement with only one type of error are favorable for rendering subsequent entanglement distillation efficient. Here we provide the tight upper bound on performances of these protocols that is determined only by the channel loss. In addition, we show that this bound is achievable by utilizing a proposed protocol [K. Azuma, N. Sota, R. Namiki, S. K. Oezdemir, T. Yamamoto, M. Koashi, and N. Imoto, Phys. Rev. A 80, 060303(R) (2009)] composed of a simple combination of linear optical elements and photon-number-resolving detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of cosine tapering window on quantum phase estimation

Here, we provide a modification to the quantum phase estimation algorithm (QPEA) [Abrams and Lloyd, Phys. Rev. Lett. 83, 5162 (1999); Cleve et al., Proc. R. Soc. A 454, 339 (1998); Nielsen and Chuang, Quantum computation and quantum information, 2002.] inspired by classical windowing methods for spectral density estimation. From this modification we obtain an upper bound in the cost that implies a cubic improvement with respect to the algorithm's error rate. Numerical evaluation of the costs also demonstrates an improvement. Moreover, with similar techniques, we detail an iterative projective measurement method for ground state preparation that gives an exponential improvement over previous bounds using QPEA. Numerical tests that confirm the expected scaling behavior are also obtained. For these numerical tests we have used a lattice Thirring model as testing ground. Using well-known perturbation theory results, we also show how to more appropriately estimate the cost scaling with respect to state error instead of evolution operator error.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum hypothesis testing with group symmetry

The asymptotic discrimination problem of two quantum states is studied in the setting where measurements are required to be invariant under some symmetry group of the system. We consider various asymptotic error exponents in connection with the problems of the Chernoff bound, the Hoeffding bound, and Stein's lemma, and derive bounds on these quantities in terms of their corresponding statistical distance measures. A special emphasis is put on the comparison of the performances of group-invariant and unrestricted measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of the Abel inversion integral in O-mode plasma reflectometry using Chebyshev–Gauss quadrature

The Abel transform is often used to reconstruct plasma density profiles from O-Mode polarized reflectometry diagnostics. However, standard numerical trapezoidal evaluation of the Abel inversion integral can be computationally expensive for a large number of evaluation points, and an endpoint singularity exists on the upper-bound of the integral, which can result in an increased error. In this work, Chebyshev–Gauss quadrature is introduced as a new method to evaluate the Abel inversion integral for the problem of O-Mode plasma reflectometry. Here, the method does not require numerical evaluation of an integral singularity and is shown to have similar accuracy compared to existing methods while being computationally efficient.

47 OTHER INSTRUMENTATION↗

Prediction of hydration energies of adsorbates at Pt(111) and liquid water interfaces using machine learning

Aqueous phase heterogeneous catalysis is important to various industrial processes, including biomass conversion, Fischer–Tropsch synthesis, and electrocatalysis. Accurate calculation of solvation thermodynamic properties is essential for modeling the performance of catalysts for these processes. Explicit solvation methods employing multiscale modeling, e.g., involving density functional theory and molecular dynamics have emerged for this purpose. Although accurate, these methods are computationally intensive. This study introduces machine learning (ML) models to predict solvation thermodynamics for adsorbates on a Pt(111) surface, aiming to enhance computational efficiency without compromising accuracy. In particular, ML models are developed using a combination of molecular descriptors and fingerprints and trained on previously published water–adsorbate interaction energies, energies of solvation, and free energies of solvation of adsorbates bound to Pt(111). These models achieve root mean square error values of 0.09 eV for interaction energies, 0.04 eV for energies of solvation, and 0.06 eV for free energies of solvation, demonstrating accuracy within the standard error of multiscale modeling. Feature importance analysis reveals that hydrogen bonding, van der Waals interactions, and solvent density, together with the properties of the adsorbate, are critical factors influencing solvation thermodynamics. Furthermore, these findings suggest that ML models can provide rapid and reliable predictions of solvation properties. This approach not only reduces computational costs but also offers insights into the solvation characteristics of adsorbates at Pt(111)–water interfaces.

Adsorption↗

Strong entanglement causes low gate fidelity in inaccurate one-way quantum computation

We study how entanglement among the register qubits affects the gate fidelity in the one-way quantum computation if a measurement is inaccurate. We derive an inequality that shows that the mean gate fidelity is upper bounded by a decreasing function of the magnitude of the error of the measurement and the amount of the entanglement between the measured qubit and other register qubits. The consequence of this inequality is that, for a given amount of entanglement, which is theoretically calculated once the algorithm is fixed, we can estimate from this inequality how small the magnitude of the error should be in order not to make the gate fidelity below a threshold, which is specified by a technical requirement in a particular experimental setup or by the threshold theorem of the fault-tolerant quantum computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved time-domain accuracy standards for model gravitational waveforms

Model gravitational waveforms must be accurate enough to be useful for detection of signals and measurement of their parameters, so appropriate accuracy standards are needed. Yet these standards should not be unnecessarily restrictive, making them impractical for the numerical and analytical modelers to meet. The work of Lindblom, Owen, and Brown [Phys. Rev. D 78, 124020 (2008)] is extended by deriving new waveform accuracy standards which are significantly less restrictive while still ensuring the quality needed for gravitational-wave data analysis. These new standards are formulated as bounds on certain norms of the time-domain waveform errors, which makes it possible to enforce them in situations where frequency-domain errors may be difficult or impossible to estimate reliably. These standards are less restrictive by about a factor of 20 than the previously published time-domain standards for detection, and up to a factor of 60 for measurement. These new standards should therefore be much easier to use effectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of the 'mean frequency' technique

The 'mean frequency' technique, a simple procedure introduced by Bebb and Gold for the approximate evaluation of sums occurring in high-order perturbation theory, represents a useful approximation method. Its predictions compare favorably to exact results obtained by Gontier and Trahin for multiphoton bound-bound transitions in hydrogen. However, the technique can be in error if the 'mean frequency' lies near certain integers.

Gaddy, E. M.↗

Sub-baud coding

In a spread-spectrum communication system, a data sequence of +1's and -1's is expanded into a sequence of +x's (bottom bar) and -x's (bottom bar) where x (bottom bar) is a length n sequence of +1's and -1's. A sub-baud code is the assignment of a different such baud sequence to each of M users with the objective of reducing interference between users. It is shown that this interference can be described in terms of the even and odd correlation functions between pairs of sequences. A technique for deriving sub-baud codes from cyclic error-correcting codes is given, and a theorem proved which bounds the quality of the resultant code. A specific such cyclic code construction procedure is given which, for any M, yields a sub-baud code for which the mutual interference can be made arbitrarily small by choosing n sufficiently large.

Massey, J. L.↗

Analysis of the passive stabilization of the long duration exposure facility

The nominal Long Duration Exposure Facility (LDEF) configurations and the anticipated orbit parameters are presented. A linear steady state analysis was performed using these parameters. The effects of orbit eccentricity, solar pressure, aerodynamic pressure, magnetic dipole, and the magnetically anchored rate damper were evaluated to determine the configuration sensitivity to variations in these parameters. The worst case conditions for steady state errors were identified, and the performance capability calculated. Garber instability bounds were evaluated for the range of configuration and damping coefficients under consideration. The transient damping capabilities of the damper were examined, and the time constant as a function of damping coefficient and spacecraft moment of inertia determined. The capture capabilities of the damper were calculated, and the results combined with steady state, transient, and Garber instability analyses to select damper design parameters.

Siegel, S. H.↗

Real time estimation and prediction of ship motions using Kalman filtering techniques

A landing scheme for landing V/STOL aircraft on rolling ships was sought using computerized simulations. The equations of motion as derived from hydrodynamics, their form and the physical mechanisms involved and the general form of the approximation are discussed. The modeling of the sea is discussed. The derivation of the state-space equations for the DD-963 destroyer is described. Kalman filter studies are presented and the influence of the various parameters is assessed. The effect of various modeling parameters on the rms error is assessed and simplifying conclusions are drawn. An upper bound for prediction time of about five seconds is established, with the exception of roll, which can be predicted up to ten seconds ahead.

Triantafyllou, M. A.↗

The dissociation energy of He2(+)

Ab initio potential energy curves for He2(+) are computed using full CI wavefunctions in conjuction with large Gaussian and Slater basis sets. The computed curves yield rotational-vibrational transitions with errors of less than 1/cm. They also yield quasi-bound levels with energies and lifetimes in reasonable agreement with translational spectroscopy measurements. The best D(e) is estimated to be 2.470 eV. Green's function Monte Carlo calculations yield a very similar value, 2.466 + or - 0.005.

Bauschlicher, Charles W., Jr.↗

Galileo EM-2 contributions to the lunar control network

A local control network is being developed using Galileo images that cover the region north of the Apollo area and lie between 10 and 100 degrees east longitude. This network is tied to the Apollo control network and will have a positional accuracy of approximately 500-1500 m. This region has been photographed by Earth-based telescopes and the Mariner 10 and Lunar Orbiter spacecraft, but the Gallileo images are preferred for control because of their superior viewing angles, resolution, and Galileo's geometrically stable sensor. Based on Davies et al., 1987, the potential accuracy of the near-side Apollo network is estimated to be between 50 and 300 m. The laser ranging retroreflector locations at the Apollo 11, 14, and 15 sites and the Lunikhod 2 site have been determined with an accuracy of about 10 m. The locations of the ALSEP transmitters relative to the retroreflectors have also been measured. These known coordinates are used to estimate errors in the Apollo network. The telescopic control is approximately bounded by 75 degrees north and south latitude and 75 degrees east and west longitudes. The accuracy of the telescopic network is thought to be about one to two km. Thus, the Galileo network might improve coordinates in the telescopic area as well as north and east of it.

Davies, M. E.↗

Evaluation of dynamic testing of full-scale wind turbine drivetrains with hardware-in-the-loop

Dynamometer testing of full-scale wind turbine drivetrains involves subjecting integrated components to extreme static loads, fatigue loads, or dynamic loads to replicate field conditions. This paper provides a detailed evaluation of the uncertainty and errors in applied loads and measured responses, and their magnitude relative to established repeatability bounds for a drivetrain subjected to static and dynamic loads on the 7.5 MW test bench at the Clemson University Wind Turbine Drivetrain Testing Facility. An ideal drivetrain simulation model is utilized to isolate the influence of load tracking errors on test article responses. It is shown that the test article response variations are mainly driven by run out and clearances inherent to the drivetrain. For the dynamic profiles, the load tracking errors are within acceptable limits. Furthermore, a frequency analysis is used to show that the test bench controller tracking performance is acceptable for profiles with frequency content up to 1.5 Hz.

17 WIND ENERGY↗

A new upper bound for the growth factor in Gaussian elimination with complete pivoting

Abstract The growth factor in Gaussian elimination measures how large the entries of an LU factorization can be relative to the entries of the original matrix. It is a key parameter in error estimates, and one of the most fundamental topics in numerical analysis. We produce an upper bound of for the growth factor in Gaussian elimination with complete pivoting — the first improvement upon Wilkinson's original 1961 bound of .

Bisain, Ankit [Department of Mathematics Massachus↗

Characterizing the Reproducibility of Noisy Quantum Circuits

The ability of a quantum computer to reproduce or replicate the results of a quantum circuit is a key concern for verifying and validating applications of quantum computing. Statistical variations in circuit outcomes that arise from ill-characterized fluctuations in device noise may lead to computational errors and irreproducible results. While device characterization offers a direct assessment of noise, an outstanding concern is how such metrics bound the reproducibility of a given quantum circuit. Here, we first directly assess the reproducibility of a noisy quantum circuit, in terms of the Hellinger distance between the computational results, and then we show that device characterization offers an analytic bound on the observed variability. We validate the method using an ensemble of single qubit test circuits, executed on a superconducting transmon processor with well-characterized readout and gate error rates. The resulting description for circuit reproducibility, in terms of a composite device parameter, is confirmed to define an upper bound on the observed Hellinger distance, across the variable test circuits. This predictive correlation between circuit outcomes and device characterization offers an efficient method for assessing the reproducibility of noisy quantum circuits.

97 MATHEMATICS AND COMPUTING↗