Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Use of Transition Modeling to Enable the Computation of Losses for Variable-Speed Power Turbine

To investigate the penalties associated with using a variable speed power turbine (VSPT) in a rotorcraft capable of vertical takeoff and landing, various analysis tools are required. Such analysis tools must be able to model the flow accurately within the operating envelope of VSPT. For power turbines low Reynolds numbers and a wide range of the incidence angles, positive and negative, due to the variation in the shaft speed at relatively fixed corrected flows, characterize this envelope. The flow in the turbine passage is expected to be transitional and separated at high incidence. The turbulence model of Walters and Leylek was implemented in the NASA Glenn-HT code to enable a more accurate analysis of such flows. Two-dimensional heat transfer predictions of flat plate flow and two-dimensional and three-dimensional heat transfer predictions on a turbine blade were performed and reported herein. Heat transfer computations were performed because it is a good marker for transition. The final goal is to be able to compute the aerodynamic losses. Armed with the new transition model, total pressure losses for three-dimensional flow of an Energy Efficient Engine (E3) tip section cascade for a range of incidence angles were computed in anticipation of the experimental data. The results obtained form a loss bucket for the chosen blade.

Ameri, Ali A.↗
NASA NTRS2020

Desorption Kinetics of O and CO from Graphitic Carbon Surfaces

The desorption of O/CO from graphitic carbon surfaces is investigated using a one-dimensional model describing the adsorbate interactions with the surface phonon bath. The kinetics of desorption are described through the solution of a master equation for the time-dependent population of the adsorbate in an oscillator state, which is modified through thermal fluctuations at the surface. The interaction of the adsorbate with the surface phonons is explicitly captured by using the computed phonon density Of states (PDOS) of the surface. The coupling of the adsorbate with the phonon bath results in the transition of the adsorbate up and down a vibrational ladder. The adsorbate-surface interaction is represented in the model using a Morse potential, which allows for the desorption process to be directly modeled as a transition from bound to free (continuum) state. The PDOS is a property of the material and the lattice; and is highly sensitive to the presence of defects. The effect of etch pits along with random surface defects on the PDOS is considered in the present work. The presence of defects causes a redshift and broadening of the PDOS, which in turn changes the phonon frequency modes available for adsorbate coupling at the surface. Using the realistic PDOS distributions, the phonon-induced desorption (PID) model was used to compute the transition and desorption rates for both pristine and defective systems. Mathissen’s rule is used to compute the phonon relaxation time for pristine and defective systems based on the phonon scattering times for each of the different scattering processes. First, the desorption rates of the pristine system is fitted against the experimental values to obtain the Morse potential parameters for each of the observed adatoms. These Morse potential parameters are used along with the defective PDOS and phonon relaxation time to compute the desorption rates for the defective system. The defective system rates (both transition and desorption) were consistently lower in comparison with the pristine system. The difference between the transition rates is more significant at lower initial states due to higher energy spacing between the levels. In the case of the desorption rates, the difference between the defective and pristine system is more significant at higher temperatures. The desorption rates for each of the system shows an order of magnitude decrease with the strongly bound systems exhibiting the greatest reduction in the desorption rates.

Swaminathan-Gopalan, Krishnan↗
NASA NTRS2024

TOI-3568 b: A Super-Neptune in the Sub-Jovian Desert

The sub-Jovian desert is a region in the mass–period and radius–period parameter space that typically encompasses short-period ranges between super-Earths and hot Jupiters, and exhibits an intrinsic dearth of planets. This scarcity is likely shaped by photo evaporation caused by the stellar irradiation received by giant planets that have migrated inward. We report the detection and characterization ofTOI-3568 b, a transiting super-Neptune with a mass of26.4±1.0M⊕, a radius of5.30±0.27R⊕, a bulk density of0.98±0.15g cm−3, and an orbital period of 4.417965 (5) d situated in the vicinity of the sub-Jovian desert. This planet orbiting a K dwarf star with solar metallicity was identified photometrically by the Transiting Exoplanet Survey Satellite (TESS). It was characterized as a planet by our high-precision radial-velocity (RV) monitoring program using MAROON-X at Gemini North, supplemented with additional observations from the SPICE large program with SPIRou at CFHT. We performed a Bayesian MCMC joint analysis of the TESSand ground-based photometry, and MAROON-X and SPIRou RVs, to measure the orbit, radius, and mass of the planet, as well as a detailed analysis of the high-resolution flux and polarimetric spectra to determine the physical parameters and elemental abundances of the host star. Our results reveal TOI-3568 b to be a hot super-Neptune rich in hydrogen and helium, with a core of heavier elements of between 10 and 25 M⊕in mass. We analyzed the photo evaporation status of TOI-3568 b and find that it experiences one of the highest extreme-ultraviolet (EUV) luminosities among planets with a mass of Mp<2MNep, yet it has an evaporation lifetime exceeding 5 Gyr. Positioned in the transition between two significant populations of exoplanets on the mass–period and energy diagrams, this planet presents an opportunity to test theories concerning the origin of the sub-Jovian desert.

stars: individual: TOI-3568↗
NASA NTRS1990

Two-photon transitions in hydrogen - A test of pseudostate summation

A technique in which the intermediate states of conventional second-order perturbation theory are replaced by a finite set of psudostates, while the energy denominators are supplanted by the expectation values of the unperturbed Hamiltonian with respect to those pseudostates, is presently used to investigate the 2S-1S transition rate on the bases of both the E-x and A-p forms of the interaction. The results thus obtained are noted to closely reflect those conventionally derived, even in cases where only a small number of terms are used; these results are also found not to be strongly dependent on the exact form of the basis functions employed.

Drachman, Richard J.↗
NASA NTRS2007

Complex Type-II Interband Cascade MQW Photodetectors

Multiple-quantum-well (MQW) photodetectors of a proposed type would contain active regions comprising multiple superlattice subregions. These devices would have complex structures: The superlattice of each subregion would be designed for enhanced absorption of photons in a desired wavelength band (typically in the infrared) and multiple subregions of different design would be cascaded for multicolor operation. The designs of these photodetectors would take advantage of the characteristic alignment of the edges of the electron-energy bands in type-II quantum-well structures: Within each finite superlattice, interband transitions would be used for detecting photons, and between finite superlattices, intraband relaxation and interband tunneling would be used for transport of charge carriers, all such as to enable detection of normally incident photons. Absorption of photons in the active region of a photodetector according to the proposal could be significantly enhanced by designing the superlattice/MQW structures to contain closely spaced energy states. The photodetector could be operated with a small bias to facilitate transport of charge carriers. The superlattices could be somewhat chirped, with a preferred transport direction.

Yang, Rui↗
NASA NTRS1994

Multifrequency emission from hot ion disks

The discovery of a large number of gamma-emitting active galactic nuclei (AGNs) by the EGRET instrument on the Compton Gamma Ray Observatory (CGRO) has spawned a lot of theoretical interest in the high-energy and multifrequency emission from these objects. Since most of them show evidence for relativistic outflow, jet models have received most of the attention so far. However, the presence of soft photons at the center of the active nucleus and the resulting Compton drag make it difficult to produce the observed amount of MeV/GeV emission. We explore hot, two-temperature accretion disks around Kerr black holes as an alternative to relativistic beam models for the production of the high-enerty emission. The decay of neutral pions created in the hot region produces photons with energies up to several hundred MeV. Relativistic pairs created as a result of charged pion decays produce additional inverse-Compton radiation in the range of approx. 1 keV-4 MeV if the pairs are exposed to UV radiation, or in the range of approx. 40 keV-150 MeV if the pairs are exposed to soft X-rays. This suggests that high-energy flares in AGNs may be triggered by changes in the disk structure (such as phase transitions or the development of electron scattering coronae) that temporarily shield the hot inner region from UV photons emitted at larger radii, thereby reducing the optical depth for MeV/GeV gamma-rays. Stochastic processes may also play a role in accelerating the utrarelativistic electrons responsible for producing the highest energy (GeV) emission.

Maisack, Michael↗
NASA NTRS1993

Dynamic subgrid-scale modeling for high-speed transitional boundary layers

The subgrid scales are modeled dynamically in a large-eddy simulation of transitional boundary-layer flow along a hollow cylinder at a Mach number of 4.5. The behavior of the dynamic-model coefficients, which is determined from local information in the resolved field, is investigated through both an a priori test with direct numerical simulation data for the same case and a complete large-eddy simulation. Both contractions proposed by Germano et al. (1991) and Lilly (1992) are used for the unique determination of the coefficients of the dynamic model, and their results are compared and assessed. The behavior, as well as the energy cascade of the subgridscale field structure, is investigated at various stages of the transition process.

El-Hady, Nabil M.↗
NASA NTRS2016

Ab Initio Simulations of Phase Stability and Martensitic Transitions in NiTi

For NiTi based alloys, the shape memory effect is governed by a transition from a low-temperature martensite phase to a high-temperature austenite phase. Despite considerable experimental and computational work, basic questions regarding the stability of the phases and the martensitic phase transition remain unclear even for the simple case of binary, equiatomic NiTi. We perform ab initio molecular dynamics simulations to describe the temperature-dependent behavior of NiTi and resolve several of these outstanding issues. Structural correlation functions and finite temperature phonon spectra are evaluated to determine phase stability. We show that finite temperature, entropic effects stabilize the experimentally observed martensite (B19') and austenite (B2) phases while destabilizing the theoretically predicted (B33) phase. Free energy computations based on ab initio thermodynamic integration confirm these results and permit estimates of the transition temperature between the phases. In addition to the martensitic phase transition, we predict a new transition between the B33 and B19' phases. The role of defects in suppressing phase transformation temperatures is discussed.

Simulations↗
NASA NTRS1983

Observations of high-energy jets in the corona above the quiet sun, the heating of the corona, and the acceleration of the solar wind

High spatial resolution observations of the ultraviolet solar spectrum which reveal high-energy events in the quiet sun are presented. The tandem Wadsworth spectrograph used to make the observations is described along with the observing techniques, and a brief description of the characteristics of high-resolution transition zone spectra is given. The sizes, velocities, line profiles, time behavior, temperature range, differential emission measures, densities, masses, energies, and birthrates of turbulent events and jets in the quiet sun are derived from the observations and discussed. Possible accelerating mechanisms for these events are discussed, and the consequences of these events for the heating of the solar corona are discussed. A cloud model of the solar wind is proposed and possible correlations between the high-energy events and other solar fine-structure features are discussed.

Brueckner, G. E.↗
NASA NTRS2010

Pair Identity and Smooth Variation Rules Applicable for the Spectroscopic Parameters of H2O Transitions Involving High-J States

Two basic rules (i.e. the pair identity and the smooth variation) applicable for H2O transitions involving high-J states have been discovered. The origins of these rules are the properties of the energy levels and wavefunctions of H2O states with the quantum number J above certain boundaries. As a result, for lines involving high-J states in individually defined groups, all their spectroscopic parameters (i.e. the transition wavenumber, intensity, pressure-broadened half-width, pressure-induced shift, and temperature exponent) must follow these rules. One can use these rules to screen spectroscopic data provided by databases and to identify possible errors. In addition, by using extrapolation methods within the individual groups, one is able to predict the spectroscopic parameters for lines in this group involving very high-J states. The latter are required in developing high-temperature molecular spectroscopic databases such as HITEMP.

Ma, Q.↗
NASA NTRS2012

Implementation of a Transition Model in a NASA Code and Validation Using Heat Transfer Data on a Turbine Blade

The purpose of this report is to summarize and document the work done to enable a NASA CFD code to model laminar-turbulent transition process on an isolated turbine blade. The ultimate purpose of the present work is to down-select a transition model that would allow the flow simulation of a variable speed power turbine to be accurately performed. The flow modeling in its final form will account for the blade row interactions and their effects on transition which would lead to accurate accounting for losses. The present work only concerns itself with steady flows of variable inlet turbulence. The low Reynolds number k- model of Wilcox and a modified version of the same model will be used for modeling of transition on experimentally measured blade pressure and heat transfer. It will be shown that the k- model and its modified variant fail to simulate the transition with any degree of accuracy. A case is thus made for the adoption of more accurate transition models. Three-equation models based on the work of Mayle on Laminar Kinetic Energy were explored. The three-equation model of Walters and Leylek was thought to be in a relatively mature state of development and was implemented in the Glenn-HT code. Two-dimensional heat transfer predictions of flat plate flow and two-dimensional and three-dimensional heat transfer predictions on a turbine blade were performed and reported herein. Surface heat transfer rate serves as sensitive indicator of transition. With the newly implemented model, it was shown that the simulation of transition process is much improved over the baseline k- model for the single Reynolds number and pressure ratio attempted; while agreement with heat transfer data became more satisfactory. Armed with the new transition model, total-pressure losses of computed three-dimensional flow of E3 tip section cascade were compared to the experimental data for a range of incidence angles. The results obtained, form a partial loss bucket for the chosen blade. In time the loss bucket will be populated with losses at additional incidences. Results obtained thus far will be discussed herein.

Ameri, Ali A.↗
NASA NTRS2004

Energetic Electrons in Solar Flares - As Viewed in X-Rays

Hard X-ray observations provide the most direct diagnostic we have of the suprathermal electrons and the hottest thermal plasma present in solar flares. The Ramaty High Energy Solar Spectroscopic Imager (RHESSI) is obtaining the most comprehensive observations of individual solar flares ever available in hard X-rays. For the first time, high-resolution spectra are available for a large number of flares that accurately display the spectral shape and its evolution and, in many cases, allow us to identify the transition from the bremsstrahlung X-rays produced by suprathermal electrons to the bremsstrahlung at lower energies emitted by thermal plasma. Also, for the first time, images can be produced in arbitrary energy bands above 3 keV, and spectra of distinct imaged components can be obtained. I will review what we have learned from RHESSI observations about flare suprathermal electron distributions and their evolution Next, I will present computations of the energy deposited by these suprathermal electrons in individual flares and compare this with the energy contained in the hot thermal plasma. I will point out unsolved problems in deducing both suprathermal electron distributions and the energy content of the thermal plasma, and discuss possible solutions. Finally, I will present evidence that electron acceleration is associated with magnetic reconnection in the corona.

Holman, Gordon D.↗
NASA NTRS1981

Energy balance in solar and stellar chromospheres

Net radiative cooling rates for quiet and active regions of the solar chromosphere and for two stellar chromospheres are calculated from corresponding atmospheric models. Models of chromospheric temperature and microvelocity distributions are derived from observed spectra of a dark point within a cell, the average sun and a very bright network element on the quiet sun, a solar plage and flare, and the stars Alpha Boo and Lambda And. Net radiative cooling rates due to the transitions of various atoms and ions are then calculated from the models as a function of depth. Large values of the net radiative cooling rate are found at the base of the chromosphere-corona transition region which are due primarily to Lyman alpha emission, and a temperature plateau is obtained in the transition region itself. In the chromospheric regions, the calculated cooling rate is equal to the mechanical energy input as a function of height and thus provides a direct constraint on theories of chromospheric heating.

Avrett, E. H.↗
NASA NTRS1975

Our national energy future - The role of remote sensing

An overview of problems and opportunities in remote sensing of resources. The need for independence from foreign and precarious energy sources, availability of fossil fuel materials for other purposes (petrochemicals, fertilizer), environmental conservation, and new energy sources are singled out as the main topics. Phases of response include: (1) crisis, with reduced use of petroleum and tapping of on-shore and off-shore resources combined; (2) a transition phase involving a shift from petroleum to coal and oil shale; and (3) exploitation of renewable (inexhaustible and clean) energy. Opportunities for remote sensing in fuel production and energy conservation are discussed along with problems in identifying the spectral signatures of productive and unproductive regions. Mapping of water resources, waste heat, byproducts, and wastes is considered in addition to opportunities for international collaboration.

Schmitt, H. H.↗
NASA NTRS1990

Thermodynamic properties and crystallization kinetics at high liquid undercooling

The heat capacities of liquid and crystalline Au-Pb-Sb alloys in the glass-forming composition range were measured with droplet emulsion and bulk samples. Based on the measured C(sub p) data, the entropy, enthalpy, and Gibbs free energy functions of the eutectic, solid mixture, and undercooled liquid were determined as a function of undercooling and compared with theoretical predictions. The results indicate an isentropic temperature at 313 + or - 5 K, which agrees well with experimental data for the glass transition. A kinetics analysis of the nucleation undercooling response suggests that the proper choice for the Gibbs free energy change during crystallization is most important in analyzing the nucleation kinetics. By classical nucleation theory, the prefactors obtained, based on a variety of theoretical predictions for the driving force, can differ by six orders of magnitude. If the nucleation rates are extrapolated to high undercooling, the extrapolations based on measured heat capacity data show agreement, whereas the predicted nucleation rates are inconsistent with results from drop tower experiments. The implications for microg experiments are discussed.

Fecht, Hans J.↗
NASA NTRS1982

Energy distribution in the strongly interacting binary system SX Cassiopeiae

IUE spectra and optical scans covering the 110-680 nm interval were obtained in a search for a source which would resolve the anomalous presence of strong Balmer emission lines in the SX Cas eclipsing binary system, which is inconsistent with the usual spectral classification of the components as A6 III + G6 III. The IUE spectra unexpectedly show such strong emission lines as those of C IV, N V and Si IV, which require higher temperatures that the already anomalously high Balmer lines, and a continuum several magnitudes higher than the extrapolated continuum of an A6 star. A model in which the UV continuum originates in the transition zone between the A6 star and an accretion disk fails to reproduce the observed energy distribution. A revision of component spectral types to B7 + K3 III removes the UV excess.

Plavec, M. J.↗