SEARCH · Engineering Papers

Results for “Electric Generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Direct Utilization of Pure and Denatured Ethanol in Metal Supported Solid Oxide Fuel Cells

Metal supported solid oxide fuel cells (MS-SOFC) are integrated with internal reforming catalyst for direct utilization of ethanol to generate electricity. MS-SOFCs are operated up to 500 h at 700°C, with water-ethanol blend fuel using high-purity ethanol and denatured ethanol. Performance and durability with denatured ethanol varies dramatically with the composition of the denaturant. Cells operated with three denatured ethanol fuels containing small amount of methanol, isopropanol, and denatonium benzoate demonstrate similar and relative stable performance after stabilization, suggesting that these fuels are fit for MS-SOFC operation. No or minimum carbon deposits are observed on the high entropy alloy-based reforming catalyst layer. Denatured ethanol containing gasoline and toluene leads to fast degradation. Here, MS-SOFCs are promising for direct utilization of denatured ethanol, offering a path to rapid-start, carbon-neutral operation with widely-available fuels.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2026

Anodic Conversion of Cyclohexane, Methylcyclohexane, and 2-Propanol: Towards a Regenerable Liquid-Fed Fuel Cell

Liquid Organic Hydrogen Carriers (LOHCs) are promising for hydrogen and energy storage but require endothermic catalytic dehydrogenation. An alternative approach is a regenerable liquid-fed fuel cell which spontaneously converts an organic carrier from its hydrogen-rich to hydrogen-lean form while generating electrical power. The anodic electrooxidation of cyclohexane, methylcyclohexane and 2-propanol in a high temperature polybenzimidazole/phosphoric acid (PBI/PA) PEM fuel cell was investigated along with a quantitative analysis of reaction products. Cyclohexane and methylcyclohexane were predominantly converted to CO 2 with only a trace formation of the corresponding aromatic and cyclic olefin byproducts. This near-to-complete oxidation of the fuels is in sharp contrast to previous reports of a selective conversion of cyclohexane to benzene, with no CO 2 byproducts. In experiments with 2-propanol, acetone was produced, with diisopropylether, propylene and CO 2 as only minor side products. However, the extent of CO 2 formation greatly increased at higher current densities.

25 ENERGY STORAGE↗

DOE OSTI2020

GEOPHIRES v2.0

GEOPHIRES v2.0 is a geothermal techno-economic simulation tool upgraded from GEOPHIRES v1.2. The name stands for "GEOthermal energy for Production of Heat and electricity (“IR”) Economically Simulated". GEOPHIRES combines reservoir, wellbore, and surface plant technical models with cost correlations and levelized cost models to estimate the capital and operation and maintenance costs, instantaneous and lifetime energy production, and overall levelized cost of energy of a geothermal plant. In addition to electricity generation, direct-use heat applications and combined heat and power or cogeneration can be modeled. Various upgrades have been implemented to develop GEOPHIRES v2.0, including: updating the built-in cost correlations, coupling to the external reservoir simulator TOUGH2, enhancing the built-in wellbore simulator, converting the programming language to Python, and making the code open-source. Users are encouraged to build upon the tool, e.g. by implementing their own correlations or coupling to other simulators.

Beckers, Koenraad↗

DOE OSTI2020

EMIS Agent Simulation Model (Electricity Markets Investment Suite) [SWR-19-56]

The Electricity Markets Investment Suite Agent-based Simulation (EMIS-AS) model is an agent-based model developed at NREL for simulating annual investment and retirement decisions of heterogeneous investors in the electricity sector. EMIS-AS is designed to capture the evolution of the electricity generation portfolio resulting from the interactions of heterogeneous investors under different policy and market designs. EMIS-AS not only allows end-users to customize market products and rules, but also to capture investors' heterogeneous financing parameters, technology preferences, beliefs about the future (forecasts), ability to update those forecasts, and risk preferences under uncertainty.

Anwar, Mahammad Bashar↗

DOE OSTI2022

PV DMFA [SWR-21-105]

The Photovoltaic Dynamic Material Flow Assessment (PV DMFA) model (also referred to here as “The model”) is a computational framework written in Python based on utility-scale PV electricity generation to quantify time-series stocks and flows of PV materials primarily in crystalline silicon PV technologies. The model evaluates cradle-to-cradle life cycle of utility-scale solar PV systems in the United States in the period 2000-2100. PV DMFA serves as a sustainability analysis tool to assess the impacts of different material circularity practices (i.e., reduce, reuse/refurbish, remanufacture, and recycle), PV module design shifts and sensitivity of material processing and technology related parameters to material installations, waste creation and raw material depletion in PV material supply chains. This tool enables advanced planning for future material needs and informs sustainable pathways for PV material management in the circular economy. This tool could be helpful to a wide range of stakeholders; Particularly, researchers and manufacturers looking for technoeconomic and/or environmental life cycle analysis (LCA) feedback for renewable energy (RE) systems.

Khalifa, SherifA.↗

DOE OSTI2022

Transformer Health Monitoring Using Dissolved Gas Analysis

Power plants use transformers for supplying generated electricity to the grid. As these transformers age and degrade, they produce specific gases. These gases can be monitored and used to predict when maintenance should be completed. This code uses four complementary techniques to predict when maintenance should be performed based on gas concentrations within the transformer.

Walker, CodyM [Idaho National Laboratory (INL), Id↗

DOE OSTI2024

RectifHydPlus Data Pipeline

The RectifHydPlus Data Pipeline is an open source and fully reproducible data processing pipeline for creating RectifHydPlus—a dataset of historical monthly net electricity generation for all US hydropower plants (>10MW). The pipeline is coded in R, applying tidyverse libraries and code principles, and using the targets data pipeline framework. All data inputs to the RectifHydPlus Data Pipeline are available from public sources. References to all data inputs, as well as instructions for running the RectifHydPlus Data Pipeline, are available on the GitLab code repository: https://code.ornl.gov/turnersw/rectifhydplus

Turner, SeanWilliam Donald [Oak Ridge National Lab↗

DOE OSTI2025

RectifHydPlus Data Pipeline v1.1.0

Turner, SeanWilliam Donald [Oak Ridge National Lab↗

DOE OSTI2023

Visual Style Elements in Human–System Interface Design for Nuclear Power Operations: Does Style Affect Performance and Preference?

As the world increasingly adopts renewable and sustainable energy systems, transitionary solutions include nuclear power, which currently provides 20% of the United States’ electricity and is the largest single source of carbon-free electricity generation. Advanced reactors are a critical component of a carbon-free mixed energy portfolio that require careful design of first-of-a-kind control rooms. The application of Human Factors Engineering (HFE) is essential for scientific and iterative testing of novel human–system interface (HSI) concepts to ensure effective, efficient, and safe plant operations. Microworlds are simulators that use simplified physics models and control systems to distill nuclear power operations into essential functions. HFE scientists used the Rancor Microworld Simulator to obtain preference and performance metrics for novel and traditional static HSI design styles. Participants comprised advanced reactor company employees and nuclear industry consultants. A mixture of quantitative and qualitative data was captured. There was a preference for the basic graphical style that included high contrast and traditional color scheme elements. No single HSI design outperformed the others, and the participants did not perform better using their preferred HSI style. We report this experiment is the first in a series of HFE testing for HSIs in advanced reactor control room development. Clear user preferences emerged for elements within static displays. The cutting-edge neumorphic style was the least preferred. Future directions include tests of dynamic displays. HFE is used in evaluating and designing HSI devices that will improve the efficiency and safety of advanced nuclear power operations.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2023

Validation of Play Fairway Analysis of the geothermal potential of Camas Prairie, south-central Idaho, by an exploration well

Abstract Play Fairway Analysis (PFA) methodology was adapted for geothermal exploration at Camas Prairie, Idaho. Geophysical data, structural and geologic mapping, volcanic rock ages and vent locations, and the distribution of thermal springs and wells all indicated a relatively high geothermal potential along the southern margin of the Prairie. An exploration well (USU Camas-1) was drilled to a depth of 618.3 m to validate the PFA. A permeable zone was encountered at ~ 357.5 m with a maximum measured temperature of ~ 80 °C, which was suppressed following the injection of cold water. A moderate transmissivity of ~ 0.25–1 cm 2 /s estimated from an injection test as well a seasonal artesian flow at ~ 0.7 L/s corroborate the presence of a permeable zone. The existence of a lacustrine clay seal was confirmed near the bottom of the basin-fill sediment occupying the upper 314 m of the well. Geothermometers suggest the USU Camas-1 well water equilibrated at a reservoir temperature of ~ 120 °C. Based on the locations of both thermal and cold wells, geothermal fluids appear to be flowing upward along one or both of two fault systems. The presence of young basalts and elevated helium isotope ratios suggest that the heat source of Camas Prairie is magmatic. However, the faults may be acting as a conduit for geothermal fluids to rise from great depth without a shallow magmatic source being present. Camas Prairie is a promising area for geothermal development, but the relatively low reservoir temperatures indicate this resource may not be suitable for electric generation. Perhaps the best use would be for heating.

Lachmar, Thomas E. (ORCID:0000000249640119)↗

DOE OSTI2020

Introduction to this special section: Geothermal energy

Geothermal energy is a global renewable resource that has the potential to provide a significant portion of baseload energy in many regions. In the United States, it has the potential to provide 8.5% of the electric generation capacity by the middle of the century. In general, geothermal systems require heat, permeability, and water to be viable for energy generation. However, with current technologies, only heat is strictly necessary in a native system. Engineered geothermal systems (EGS) introduce water into the subsurface at elevated pressures and reduced temperatures and enhance permeability through hydraulic and/or shear fracturing. Additionally, although moderate- to high-temperature resources currently dominate geothermal energy production, low-temperature resources have been utilized for direct-use cases. When well balanced and maintained, geothermal resources can produce significant amounts of heat and achieve long-term sustainability on the order of an estimated tens to hundreds of years.

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

Westinghouse advanced fuel management strategies leveraging high enrichment and high burnup fuel to optimize PWR economics

In the US, nuclear power plants have been focused on increasing electricity generation for over three decades via longer operating cycles, reduced number of outages and duration, and the implementation of power up-rates. The potential for zero-carbon emission credits and other carbon-reduction initiatives further makes nuclear power utilities to focus on increasing generation capability. Longer operating cycles provide increased energy generation and enable economic savings to nuclear utilities when the increase in fuel loading required to achieve the extended cycle energy target and resulting increase in total fuel cost is offset by the savings from outage avoidance and reduced replacement power costs. For the current licensed limits of 5 w/o {sup 235}U enrichment and 62 GWd/tU peak pin burnup, higher power density PWR plants, which are prevalent in the PWR fleet, require an excessively penalizing fraction of feed fuel assemblies to operate for the extended cycle duration, with inevitably poor fuel use and fuel cycle economics that cannot be counterbalanced by the savings on outage cost avoidance. To overcome this barrier, the nuclear industry is pursuing development of high enrichment/high burnup fuel technology ({sup 235}U enrichment up to 8 w/o and peak pin burnup up to 75 GWd/tU) which increases fuel energy generation capability and can enable high power density plants to achieve positive economics on 24-month cycle of operation. This paper presents advanced fuel management strategies developed by Westinghouse to enable transition of PWR reactors from 18-month to 24-month cycle of operation, with and without a core thermal power uprate, which are then used as basis to assess the economics of a direct transition from 18 to 24-month cycles with high enrichment/high burnup fuel. The results show that these fuel management strategies, especially if coupled with thermal power up-rates, present the opportunity for substantial economic benefits to utilities. The systematic review of fuel management strategies presented can provide an illustrative reference for decision makers as they consider how to maximize nuclear energy generation economically. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Gen IV Education and Training Working Group Webinars’ Initiative

Collaboration and support among national laboratories, industry, universities, and research and development organizations are vital to not only maintain a skilled and competent nuclear workforce but also to avert the risk of human resource shortages. As stated in a recent IAEA paper [1], the world nuclear electrical generating capacity is projected to increase to 554 GW(e) by 2030 and up to 874 GW(e) by 2050 (Fig. 1). This represents a 42% increase over current levels by 2030 and a doubling of the current capacity by 2050. To promote Education and Training (E&T) on Gen IV reactor systems and other nuclear related topics of interest, the Gen IV Education and Training Working Group (ETWG) identifies and advertises training courses; engages collaboration with other international education and training organizations; delivers webinars dedicated to Gen IV systems; and maintains a modern social medium platform to exchange information and ideas on Gen IV R&D topics, as well as on related GIF education and training activities. At the end of June 2020, the GIF ETWG has produced, podcasted and posted forty-one webinars covering the six Gen IV systems and various subjects addressing e.g. the economics of the nuclear fuel cycle, sustainability aspects of Gen IV systems, nuclear fuels and materials challenges, the thorium fuel cycle, energy conversion systems, and lessons learned for knowledge management and preservation. This paper describes the development of these webinars from the initial concept to its full realization, with future webinars planned in 2021, addressing topics such as materials and fuels performance for advanced reactors, small modular reactor.

Paviet, Patricia D.↗

DOE OSTI2022

GeoRePORT 2.0 - Protocols and Reporting Tools

Version 2 of the GeoRePORT protocols and excel-based reporting tools. Software allows users to grade the geologic, technical, and socio-economic conditions at a geothermal resource location for both electricity generation and direct-use. Includes tool and protocols for: * Geologic Assessment Tool * Technical Assessment Tool * Socio-Economic Assessment Tool * International Socio-Economic Assessment Tool In addition, GeoRePORT now includes a Resource Size Assessment tool and protocol.

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

Dataset for report: Non-Technical Barriers to Geothermal Development in California and Nevada

In California and Nevada, geothermal projects are subject to non-technical barriers, which may create development delays leading to higher project costs and risks and decreased competitiveness with other electricity generation technologies. These non-technical barriers may include federal and state permits, authorizations, environmental reviews, and other regulatory requirements that are applicable throughout different phases of geothermal project development. The 2022 National Renewable Energy Laboratory (NREL) report, "Non-Technical Barriers to Geothermal Development in California and Nevada" presents findings of a study on non-technical barriers that may influence geothermal project development. The set of data resources relied upon for the report includes: 1) interviews conducted with relevant geothermal stakeholders including regulators and project developers, 2) federal and state environmental review documents developed for specific projects, 3) a techno-economic analysis conducted using the NREL Annual Technology Baseline (ATB) framework, and 4) an analysis of the impacts of site-specific land access and permitting considerations on project development readiness conducted using the Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) Socioeconomic Assessment Tool (SEAT).

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

CalWave - Open Water Demonstration - System and Component Overview Content Models and Drawings

Data for the CalWave - Open Water Demonstration, a submerged pressure differential Wave Energy Converter (WEC) Device. Device is moored to the seabed, and the motion of the waves causes the sea level to rise and fall above the device, inducing a pressure differential in the device. The alternating pressure pumps fluid through a system to generate electricity, which is transmitted to shore via bidirectional cables. Documentation and data here includes: System Overview Content Model and Drawings as well as Component Overview Content Model and Drawings.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

CalWave - Open Water Demonstration - LCOE Content Model

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

CalWave - Open Water Demonstration - Field Testing Content Models (10/21 - 7/22)

Data for the CalWave - Open Water Demonstration, a submerged pressure differential Wave Energy Converter (WEC) Device. Device is moored to the seabed, and the motion of the waves causes the sea level to rise and fall above the device, inducing a pressure differential in the device. The alternating pressure pumps fluid through a system to generate electricity, which is transmitted to shore via bidirectional cables. Documentation and data here includes: Open Water Demonstration, including field testing content models for nearly 10 months of continuous ocean operation, from October 2021 through July 2022.

16 TIDAL AND WAVE POWER↗