Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXCITON MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Size-Dependent Asymmetric Auger Interactions in Plasma-Produced n- and p-Type-Doped Silicon Nanocrystals

Nonradiative Auger recombination (AR) tends to dominate carrier dynamics in charged, quantum-confined structures. Consequently, it complicates the practical realization of many semiconductor nanocrystal (NC)-based devices such as light-emitting diodes, photovoltaic cells, and single-photon emitters, in which charged exciton states often occur. To this end, extensive experimental studies on direct band gap NCs have investigated the trion components (both positive and negative) that construct the total AR rate. However, such an analysis has remained elusive for indirect band gap Si NCs. In this study, we investigate AR decay of non-thermal plasma-produced n- and p-type-doped Si NCs. We expand the study over a large NC size range (D NC ~ 3-8 nm), in which n- and p-type doping is achieved by either a substitutional or surface doping effect, respectively. First, we monitor the AR of charge-neutral multiexcitons by measuring the biexciton lifetime (t X X) as a function of the NC size and doping configuration. We show that this method can be used to determine the presence of free carriers for any doped NC system, regardless of the presence/absence of defect channels in the carrier dynamics. Second, we develop a photophysical fitting model to determine the Auger lifetime of the simplest charged states in Si NCs: the negative (t X - ) and positive (t X + ) trions. Trion lifetimes shorten with increasing quantum confinement, as expected from (1) closer spatial proximity of the interacting charges and (2) increased relaxation of the momentum conservation rule. While both t X - and t X + are in the nanosecond time regime (and both therefore completely dominate the carrier dynamics), AR with excess holes is faster. This asymmetry is explained by a higher density of valence band states in comparison to the conduction band states, due to effective mass differences between electrons and holes.

36 MATERIALS SCIENCE↗

Science-based design of stable quantum dots for energy-efficient lighting

II-VI quantum dots, such as CdSe and CdTe, are attractive as downconversion materials for solid-state lighting, because of their narrow linewidth, tunable emission. However, for these materials to have acceptable quantum yields (QYs) requires that they be coated with a II-VI shell material whose valence band offset serves to confine the hole to the core. Confinement prevents the hole from accessing surface traps that lead to nonradiative decay of the exciton. Examples of such hole-confined core/shell QDs include CdTe/CdSe and CdSe/CdS. Unfortunately, the shell can also cause problems due to lattice mismatch, which ranges from 4-6% for systems of interest. This lattice mismatch can create significant interface energies at the heterojunction and places the core under radial compression and the shell under tangential tension. At elevated temperatures (~240°C) interfacial diffusion can relax these stresses, as can surface reconstruction, which can expose the core, creating hole traps. But such high temperatures favor the hexagonal Wurtzite structure, which has lower QY than the cubic zinc blende structure, which can be synthesized at lower temperatures, ~140°C. In the absence of alloying the core/shell structure can become metastable, or even unstable, if the shell is too thick. This can cause result in an irregular shell or even island growth. But if the shell is too thin thermallyactivated transport of the hole to surface traps can occur. In our LDRD we have developed a fundamental atomistic modeling capability, based on Stillinger-Weber and Bond-Order potentials we developed for the entire II-VI class. These pseudo-potentials have enabled us to conduct large-scale atomistic simulations that have led to the computation of phase diagrams of II-VI QDs. These phase diagrams demonstrate that at elevated temperatures the zinc blende phase of CdTe with CdSe grown on it epitaxially becomes thermodynamically unstable due to alloying. This is accompanied by a loss of hole confinement and a severe drop in the QY and emission lifetime, which is confirmed experimentally for the zinc blende core/shell QDs prepared at low temperatures. These QDs have QYs as high as 95%, which makes them very attractive for lighting. Finally, to address strain relaxation in these materials we developed a model for misfit dislocation formation that we have validated through atomistic simulations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Interplay between Mixed and Pure Exciton States Controls Singlet Fission in Rubrene Single Crystals

Singlet fission (SF) is a multielectron process in which one singlet exciton S converts into a pair of separated triplet excitons T. SF is widely studied as it may help overcome the Shockley−Queisser efficiency limit for semiconductor photovoltaic cells. To elucidate and control the SF mechanism, great attention has been given to the identification of intermediate states in SF materials, which often appear elusive due to the complexity and fast time scales of the SF process. Here, we apply 14 fs-1 ms transient absorption techniques to high-purity rubrene single crystals to disentangle the intrinsic fission dynamics from the effects of defects and grain boundaries and to identify reliably the fission intermediates. Our data demonstrates that above-gap excitation directly generates a hybrid vibronically assisted mixture of singlet state and triplet-pair multiexciton [S/TT], which rapidly (<100 fs) and coherently branches into pure singlet or triplet excitations. The relaxation of [S/TT] to S is followed by a relatively slow and temperature-activated (48 meV activation energy) incoherent fission process. The SF competing pathways and intermediates revealed here unify the observations and models presented in previous studies of SF in rubrene and offer alternative strategies for the development of SF-enhanced photovoltaic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of dimensionality on the optical absorption properties of CsPbI 3 perovskite nanocrystals

The bandgaps of CsPbI 3 perovskite nanocrystals are measured by absorption spectroscopy at cryogenic temperatures. Anomalous bandgap shifts are observed in CsPbI 3 nanocubes and nanoplatelets, which are modeled accurately by bandgap renormalization due to lattice vibrational modes. We find that decreasing dimensionality of the CsPbI 3 lattice in nanoplatelets greatly reduces electron-phonon coupling, and dominant out-of-plane quantum confinement results in a homogeneously broadened absorption line shape down to cryogenic temperatures. An absorption tail forms at low-temperatures in CsPbI 3 nanocubes, which we attribute to shallow defect states positioned near the valence band edge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

General framework for quantifying dissipation pathways in open quantum systems. III. Off-diagonal subsystem–bath couplings

This paper extends the previously reported theory of dissipation pathways [C. W. Kim and I. Franco, J. Chem. Phys. 160, 214111 (2024)] to incorporate off-diagonal subsystem–bath coupling, which is often required to model molecular systems where the environment directly influences transitions and couplings between subsystem states. We systematically derive master equations for both population transfer and dissipation into individual bath components, for which we also rigorously prove energy conservation and detailed balance. The approach is based on second-order perturbation theory with respect to the subsystem–bath couplings, whose form is not limited to any specific model. The accuracy of the developed method is tested by applying it to diverse model Hamiltonians involving linearly coupled harmonic oscillator baths and comparing the outcomes against the hierarchical equations of motion (HEOM) method. Overall, our method accurately quantifies the contributions of specific bath components to the overall dissipation while significantly reducing the computational cost compared to numerically exact methods such as HEOM, thus offering a path to examine how vibronic interactions steer non-adiabatic processes in realistic chemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of Cu on recombination in high voltage CdTe solar cells

Using photoluminescence spectroscopy, we construct a recombination model for state-of-the-art CdTe solar cells doped with Cu. Here, we observe that Cu on Cd sites form a dominant acceptor state about 150 meV from the valence band. Although it is intuitive that this state can increase hole density, we also find that this relatively shallow dopant can also limit lifetime. Consequently, CdTe solar cells doped with Cu could have a lifetime limitation inversely proportional to the hole concentration.

14 SOLAR ENERGY↗

Recovery Act: "Near-Single-Crystalline Photovoltaic Thin Films on Polycrystalline, Flexible Substrates" (Final Report)

III-V photovoltaics have exhibited efficiencies above 40%, but have found only a limited use because of the high cost of single crystal substrates. At the other end of the spectrum, polycrystalline and amorphous thin film solar cells offer the advantage of low-cost fabrication, but have not yielded high efficiencies. Our program is based on single-crystalline-like thin film photovoltaics on polycrystalline substrates using biaxially-textured templates made by Ion Beam-Assisted Deposition (IBAD). MgO templates made by IBAD on flexible metal substrate have been successfully used for epitaxial growth of germanium films. In spite of a 4.5% lattice mismatch, heteroepitaxial growth of Ge was achieved on CeO 2 that was grown on IBAD MgO template. Room temperature optical bandgap of the Ge films was identified at 0.67 eV indicating minimal residual strain. Refraction index and extinction coefficient values of the Ge films were found to match well with that measured from a reference Ge single crystal. GaAs has been successfully grown epitaxially on Ge on metal substrate by molecular beam epitaxy. RHEED patterns indicate self annihilation of antiphase boundaries and the growth of a single domain GaAs. The GaAs is found to exhibit strong photoluminescence signal and, an existence of a relatively narrow (FWHM~20 meV) band-edge excitons measured in this film indicates a good optoelectronic quality of deposited GaAs. While excellent epitaxial growth has been achieved in GaAs on flexible metal substrates, the defect density of the films as measured by High Resolution X-ray Diffraction and etch pit experiments showed a high value of 5 x 10 8 per cm 2 . Cross sectional transmission electron microscopy of the multilayer architecture showed concentration of threading dislocations near the germanium-ceria interface. The defect density was found decrease as the Ge films were made thicker. The defects appear to originate from the MgO layer presumably because of large lattice mismatches between the various layers. The defect density in GaAs was reduced by a factor of five by adding a step of in-situ deposition of Ge by MBE on the sputtered Ge prior to GaAs growth. We have investigated device design strategies that would support development of high-efficiency devices in presence of dislocation densities of 10 8 cm -2 present in our epitaxial GaAs films. Results from modeling work show that with a proper emitter, base and doping selection, the modeled efficiency of a GaAs cells with dislocation densities of 10 9 and 10 8 cm -2 could be increased from 1% and 7% to 11% and 17% respectively. Under AM0, this single junction GaAs solar cell, has optimized value of emitter and base thickness of around 0.7 and 1.7 microns respectively, to give a maximum efficiency of 24.2%. We have fabricated complete GaAs solar cells using our Ge films on metal substrates. Pattern resolution of few microns with well-defined grid line of 30 microns has been realized on few cm square flexible templates. The ability to grow single-crystalline-like Ge films on flexible, polycrystalline substrates by reel-to-reel tape processing now provides an immense potential to fabricate high quality III-V photovoltaics on flexible, inexpensive substrates.

14 SOLAR ENERGY↗

Entanglement dynamics of photon pairs emitted from quantum dots

We present a model that describes states of photon pairs, which have been generated by biexciton cascade decays of self-assembled quantum dots, the use of which yields a finding that agrees well with the experimental result. Furthermore, we calculate the concurrence and determine the temperature behavior associated with the so-called entanglement sudden death that prevents quantum dots emitting entangled photon pairs at raised temperatures. The relationship between the fine-structure splitting and the sudden death temperature is also provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab Initio Polariton Transport Dynamics with the Classical Path Approximation

We present an ab initio framework for simulating polariton transport dynamics based on the classical path approximation (CPA). The quantum dynamics of polariton transport involves simulating many electronic degrees of freedom, making a fully ab initio dynamics simulation computationally expensive. We demonstrate that the CPA, which removes the need for excited-state nuclear gradients, is well-suited for polaritonic systems because collective light–matter coupling leads to vanishing excited-state forces. Benchmark comparisons between CPA and full evaluation of the excited-state forces show excellent agreement for polariton transport results in model light–matter systems such as polariton group velocities and mean-squared displacements. Ab initio simulations of polariton transport using CPA reproduce key physical trends that are observed in experiments with BODIPY molecules. Our work establishes the CPA as a highly efficient tool for ab initio investigations of transport and energy flow in hybrid light–matter systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trapping of charge carriers into InAs/AlAs quantum dots at liquid-helium temperature

The problem of how the probability of trapping of charge carriers into quantum dots via the wetting layer influences the steady-state and time-dependent luminescence of the wetting layer and quantum dots excited via the matrix is analyzed in the context of some simple models. It is shown that the increase in the integrated steady-state luminescence intensity of quantum dots with increasing area fraction occupied by the quantum dots in the structure is indicative of the suppression of trapping of charge carriers from the wetting layer into the quantum dots. The same conclusion follows from the independent decays of the time-dependent luminescence signals from the wetting layer and quantum dots. The processes of trapping of charge carriers into the InAs quantum dots in the AlAs matrix at 5 K are studied experimentally by exploring the steady-state and time-dependent photoluminescence. A series of structures with different densities of quantum dots has been grown by molecular-beam epitaxy on a semi-insulating GaAs (001) substrate. It is found that the integrated photoluminescence intensity of quantum dots almost linearly increases with increasing area occupied with the quantum dots in the structure. It is also found that, after pulsed excitation, the photoluminescence intensity of the wetting layer decays more slowly than the photoluminescence intensity of the quantum dots. According to the analysis, these experimental observations suggest that trapping of excitons from the wetting layer into the InAs/AlAs quantum dots at 5 K is suppressed.

36 MATERIALS SCIENCE↗

Ab Initio Polariton Spectra of ZnTPP Molecules Collectively Coupled Inside an Optical Cavity

Exciton-polaritons are quasi-particles formed by the quantum mechanical hybridization of electronic and photonic excitations. Despite extensive investigations, a fundamental understanding of molecular polariton spectra and the polariton delocalization from an ab initio theoretical perspective remains elusive. We simulate experimentally measured linear transmission spectroscopy of many Zinc(II) tetraphenylporphyrin (ZnTPP) molecules collectively coupled to a cavity from first principles. Our theoretical approach incorporates many low-lying electronic excitations in ZnTPP molecules, as well as collective light-matter couplings between ZnTPP and the quantized radiation modes, both of which are shown to be the key to accurately recovering the experimental spectra. We further analyzed to what extent the polariton and dark states are delocalized over many molecules, for the first time, using fully ab initio descriptions of the molecules. We finally investigate the line width as a function of detuning, providing new theoretical insights into the experimentally observed motional narrowing behavior. Our work presents first-ofits- kind theoretical studies on molecular polariton spectra, offering a new perspective on molecular polariton formation in realistic ab initio molecular systems whose rich, many-state nature provides spectral features enabled by the high density of electronic states beyond simple quantum optics models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridging the time scale in exascale computing of chemical systems (Final Technical Report)

This report summarizes the work carried out with support of the United States Department of Energy under Award DE-SC0019441. The theme of this project was to develop and apply methods that allowed for the acceleration of atomistic calculations, particularly in challenging areas such as multiphase systems, electrified interfaces, uncertainty estimation, and applications requiring chemical accuracy, which tend to be applications where simulation time is severely bottlenecked by the computational time requirements. Much of the focus was on the application of emerging machine-learning methodologies, although a wide range of methodologies were employed. This report has two major sections. The first focuses on the methodological advances themselves. Within this part, we report a number of major advances, a few examples of which are described here. We report the first machine-learning scheme for the acceleration of electronically grand-canonical calculations (that is, those applicable to electrochemistry). We report new methods of performing transfer learning, in which physics-based priors can be used to provide predictions, often with uncertainty estimates, of images well outside of training sets; we also offer ways to fine-tune these transfer-learning models. We provide a new systematic means to generate and apply minimal training data sets to very large (10,000’s of atoms) systems, with only small training sets appropriate for electronic structure. We developed new methodologies to integrate surface vibrations into surface adsorption calculations. We made advances to the applicability of diffusion Monte Carlo methods to allow (learned) force prediction, finite-size error correction, and force-free means of searching for transition states. We integrated machine-learned atomistic predictions into mechanism generation codes. Additionally, we released new software including AmpTorch, a modernized version of our original atomistic machine-learning code Amp. The second part of this report focuses on the scientific applications that accompanied, and were often enabled by, the methodological advances described earlier. A few examples follow, but full details are in the individual chapters of the report. For example, we developed a general theory of phonon-induced friction on molecular adsorbates. We showed fundamentally how solvent influences the adsorption and desorption process and how it differs from the processes typically involved at the solid–gas interface, making aqueous-phase and electrocatalysis different from traditional thermocatalysis. We examined how metal–insulator and magnetic transitions can be probed, and accelerated exciton dynamics via Frenkel Hamiltonian parameters. We showed that the nearsighted force-training approach, developed within this project, can predict both the stability and reactivity of large nanoparticles, and can also lead to insights on catalyst coverage on binding energies and entropies. These applied studies, which generally integrated with our method development, allowed us to push forward the theoretical understanding of several reaction classes.

08 HYDROGEN↗

Quantum Bohm correction to polarization spectrum of graphene

In this paper, by using a quantum hydrodynamic plasma model which incorporates the important quantum statistical pressure and electron diffraction force, we present the corrected plasmon dispersion relation for graphene which includes a k{sup 4} quantum term arising from the collective electron density wave interference effects. This correction may well describe the shortcoming of the previous results based on the classical hydrodynamics and confirms that the quantum hydrodynamic model may be as effective as the random phase approximation in successful description of the collective density excitations in quantum plasmas. It is clearly observed that the quantum correction due to the collective interaction of electron waves gives rise to significant contribution in the dispersion behavior of the collective plasmon density waves in a wide range of wavelength, as a fundamental property of the monolayer atom-thick graphene. It is revealed that the plasmon density-perturbation linear phase-speed in graphene possesses some universal minimum characteristic value, in the absence of an external magnetic field. It is further remarked that such correction also has important effect on the dielectric function, hence on the impurity screening, in graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ring currents modulate optoelectronic properties of aromatic chromophores at 25 T

The properties of organic molecules can be influenced by magnetic fields, and these magnetic field effects are diverse. They range from inducing nuclear Zeeman splitting for structural determination in NMR spectroscopy to polaron Zeeman splitting organic spintronics and organic magnetoresistance. A pervasive magnetic field effect on an aromatic molecule is the aromatic ring current, which can be thought of as an induction of a circular current of π-electrons upon the application of a magnetic field perpendicular to the π-system of the molecule. While in NMR spectroscopy the effects of ring currents on the chemical shifts of nearby protons are relatively well understood, and even predictable, the consequences of these modified electronic states on the spectroscopy of molecules has remained unknown. In this work, we find that photophysical properties of model phthalocyanine compounds and their aggregates display clear magnetic field dependences up to 25 T, with the aggregates showing more drastic magnetic field sensitivities depending on the intermolecular interactions with the amplification of ring currents in stacked aggregates. These observations are consistent with ring currents measured in NMR spectroscopy and simulated in time-dependent density functional theory calculations of magnetic field-dependent phthalocyanine monomer and dimer absorption spectra. Here, we propose that ring currents in organic semiconductors, which commonly comprise aromatic moieties, may present new opportunities for the understanding and exploitation of combined optical, electronic, and magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Electronic Polarization on the Spectral Density

Accurate spectral densities are necessary for computing realistic exciton dynamics and nonlinear optical spectra of chromophores in condensed-phase environments, including multichromophore pigment–protein systems. However, due to the significant computational cost of computing spectral densities from first principles, requiring many thousands of excited-state calculations, most simulations of realistic systems rely on treating the environment as fixed-point charges. In this work, using a number of representative systems ranging from solvated chromophores to the photoactive yellow protein (PYP), we demonstrate that the quantum mechanical (QM) electronic polarization of the environment is key to obtaining accurate spectral densities and line shapes within the cumulant framework. We show that the QM environment can enhance or depress the coupling of fast chromophore degrees of freedom to the energy gap, altering the electronic–vibrational coupling and the resulting vibronic progressions in the absorption spectrum. In analyzing the physical origin of peaks in the spectral density, we identify vibrational modes that couple the electron and the hole as being particularly sensitive to the QM screening of the environment. For PYP, we reveal the need for careful determination of the appropriate QM region to obtain reliable spectral densities. Our findings suggest that the QM polarization of the environment can be crucial not just for excitation energies but also for electronic–vibrational coupling in complex systems with implications for the correct modeling of linear and nonlinear optical spectroscopy in the condensed phase as well as energy transfer in pigment–protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Continuum model of strong light-matter coupling for molecular polaritons

Strong coupling between light and matter generates hybrid polariton modes. We present a continuum formalism that expresses the polariton modes in terms of light and matter densities of states (DOS). We derive exact expressions for the light and matter DOS for a planar cavity containing a strongly dispersive dielectric.We show that these DOS depend exclusively on the linear response of the cavity components, i.e., the reflectance of the mirrors and the susceptibility of the dielectric. Here, we further show that, within the strong coupling regime, the light and matter DOS are well approximated by coupled mode theory. Altogether, our continuum formalism offers a unified treatment of polaritons that connects the framework of light-matter coupling with that of linear dispersion.

36 MATERIALS SCIENCE↗

Through space and through bridge channels of charge transfer at p-n nano-junctions: A DFT study

Details of charge density distribution at p-n nano interface are analyzed with density functional theory techniques using model system of dimers of doped silicon quantum dots interacting through bond and through space. Spatial distributions of transition densities between the ground and excited states suggest the character of essential electronic excitations, which have a Fӧrster, bound, unbound, or charge transfer character. A redistribution of electronic density from n-impurities to p-impurities results in a ground state polarization and creates an offset of energies of the bands localized on p-doped quantum dot and the bands localized on n-doped quantum dot. In conclusion, although impurities contribute very few orbitals to the total density, a ground state charge redistribution and polarization are both responsible for the presence of a large number of charge transfer excitations involving solely silicon orbitals.

intrinsic silicon↗

Ultrastrong light-matter coupling in electrically doped microcavity organic light emitting diodes

The coupling of the electromagnetic field with an electronic transition gives rise, for strong enough light-matter interactions, to hybrid states called exciton-polaritons. When the energy exchanged between light and matter becomes a significant fraction of the material transition energy an extreme optical regime called ultrastrong coupling (USC) is achieved. We report a microcavity embedded p-i-n monolithic organic light emitting diode working in USC, employing a thin film of squaraine dye as active layer. A normalized coupling ratio of 30% has been achieved at room temperature. These USC devices exhibit a dispersion-less angle-resolved electroluminescence that can be exploited for the realization of innovative optoelectronic devices. Our results may open the way towards electrically pumped polariton lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗