Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic polymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Characterization and Analysis of Insulated Metal Substrate-Based SiC Power Module for Traction Application

This paper presents the electrical characterization and drive cycle--based thermal analysis of an insulated metal substrate (IMS)--based silicon carbide power module for high-power traction inverters. The substrate was constructed using a thin layer of polymer--ceramic blend dielectric material with a thick copper core to improve transient thermal performance. The cooling performance of this module has already been validated with promising results. In this paper, an experimental test bed was set up to evaluate the dynamic and static electrical performance of the designed module under a wide range of operating conditions. The characterization results were then used to develop a drive cycle--based thermal model to validate the performance compared to the traditional direct bonded copper--based power module. The results indicate that the IMS-based power module is a suitable solution for high-power traction applications.

Chowdhury, Shajjad↗
DOE OSTI2020

Experimental and theoretical evidence for hydrogen doping in polymer solution-processed indium gallium oxide

The field-effect electron mobility of aqueous solution-processed indium gallium oxide (IGO) thin-film transistors (TFTs) is significantly enhanced by polyvinyl alcohol (PVA) addition to the precursor solution, a >70-fold increase to 7.9 cm 2 /Vs. To understand the origin of this remarkable phenomenon, microstructure, electronic structure, and charge transport of IGO:PVA film are investigated by a battery of experimental and theoretical techniques, including In K-edge and Ga K-edge extended X-ray absorption fine structure (EXAFS); resonant soft X-ray scattering (R-SoXS); ultraviolet photoelectron spectroscopy (UPS); Fourier transform-infrared (FT-IR) spectroscopy; time-of-flight secondary-ion mass spectrometry (ToF-SIMS); composition-/processing-dependent TFT properties; high-resolution solid-state 1 H, 71 Ga, and 115 In NMR spectroscopy; and discrete Fourier transform (DFT) analysis with ab initio molecular dynamics (MD) liquid-quench simulations. The 71 Ga{ 1 H} rotational-echo double-resonance (REDOR) NMR and other data indicate that PVA achieves optimal H doping with a Ga···H distance of ~3.4 Å and conversion from six- to four-coordinate Ga, which together suppress deep trap defect localization. This reduces metal-oxide polyhedral distortion, thereby increasing the electron mobility. Finally, hydroxyl polymer doping thus offers a pathway for efficient H doping in green solvent-processed metal oxide films and the promise of high-performance, ultra-stable metal oxide semiconductor electronics with simple binary compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The interpenetration polymer network in a cement paste–waterborne epoxy system

The formation of the interpenetrating polymer network (IPN) structure within the cement-polymer system has been revealed by experiments from 2 dimensional to 3-dimensional scales. However, the microstructure design and performance prediction of IPN as a function of specific C-S-H/polymer components or ingredients' parameters e.g. water to cement ratios (w/c), polymer to cement ratios (p/c), monomer components, degree of polymerization (DP), etc. is by far not available. Here we developed a mesoscale model for IPN visualization based on the Flory-Huggins interaction theory which was applied to cement science for the first time. All the ingredients in the micro-structure were considered as soluble beads with rational sizes based on their properties obtained by molecular dynamic methods. The interaction parameters of each bead were then determined based on their element ratios and chemical backbones. The model was validated with the waterborne epoxy-cement material (WECM) in which a novel waterborne epoxy resin (WEP) was prepared and impregnated. The verification results on the 2D-3D scale show that the developed model predicts the WECM's IPN structures by rule and line concerning DP, w/c, and p/c in the mixture. The C-S-H beads were progressively scaled in size which alters the C-S-H texture to have completely different dissolution characteristics. Beads of diameter ~6 Å are more unstable and soluble which enable them to form a continuous phase in water or a composite structure with WEP. In contrast, beads with diameters larger than 10 Å have different properties with stronger nucleation effects. The results also suggest the impregnation content of WEP in cement-based material should be limited to 10% vol. to prevent the polymer IPN from decomposing into discrete clusters. The application of Flory-Huggins theory in cement-based composites demonstrates great potential in performance prediction and microstructure design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrogen Bonding and Its Effect on the Orientational Dynamics of Water Molecules inside Polyelectrolyte Brush-Induced Soft and Active Nanoconfinement

Despite being the most ubiquitous compound on Earth, the fundamental properties of water are not fully understood, especially in nanoconfinement. Densely grafted polyelectrolyte (PE) molecules attain the configuration of a “brush”: these PE brushes, due to their ability to form hydrogen bonds (HBs) with water via the PE functional groups, act as a source of soft and active nanoconfinement for the brush-trapped water molecules. In this paper, we study the effects of PE brush-induced confinement on the structure, dynamics and energetics of the water-water and water-PE HBs. Our results indicate a significant weakening of the HBs from bulk to sparsely grafted to densely grafted brushes. i.e., by increasing the degree of brush-induced nanoconfinement. We explain that this weakening of water-water HBs is caused by the disruption of the extended network of water molecules within the brush-induced nanoconfinement. This is confirmed by performing a ring structure analysis of the water molecules, which yields a reduction in the average ring size at higher degrees of brush-induced nanoconfinement (i.e., at higher brush grafting densities). Furthermore, we investigate the role of HB on the orientational dynamics of the water molecules. Here, we observe that the rotational motion of the water molecules becomes sluggish inside the PE brushes. Recent findings have indicated that the water and counterions trapped in brush-induced nanoconfinement demonstrate structures (in combination with the PE functional group) analogous to that in “water-in-salt” electrolytes that have seen extensive recent uses for Li-ion battery applications. However, the rotational dynamics of water molecules inside the brush-induced nanoconfinement is found to be distinctly different from that of conventional “water-in-salt” electrolytes in absence of any confinement; therefore, the present study will provide the necessary platform towards conceptualizing polymer-based nanoconfinement for battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Uniqueness of relaxation times determined by dielectric spectroscopy

Dielectric spectroscopy is extremely powerful to study molecular dynamics, because of the very broad frequency range. Often multiple processes superimpose resulting in spectra that expand over several orders of magnitude, with some of the contributions partially hidden. For illustration, we selected two examples, (i) normal mode of high molar mass polymers partially hidden by conductivity and polarization and (ii) contour length fluctuations partially hidden by reptation using the well-studied polyisoprene melts as example. The intuitive approach to describe experimental spectra and to extract relaxation times is the addition of two or more model functions. Here, we use the empirical Havriliak-Negami function to illustrate the ambiguity of the extracted relaxation time, despite an excellent agreement of the fit with experimental data. We show that there are an infinite number of solutions for which a perfect description of experimental data can be achieved. However, a simple mathematical relationship indicates uniqueness of the pairs of the relaxation strength and relaxation time. Sacrificing the absolute value of the relaxation time enables to find the temperature dependence of the parameters with a high accuracy. For the specific cases studied here, the time temperature superposition (TTS) is very useful to confirm the principle. However, the derivation is not based on a specific temperature dependence, hence, independent from the TTS. We compare new and traditional approaches and find the same trend for the temperature dependence. The important advantage of the new technology is the knowledge of the accuracy of the relaxation times. Relaxation times determined from data for which the peak is clearly visible are the same within the experimental accuracy for traditional and new technology. However, for data where a dominant process hides the peak, substantial deviations can be observed. Finally, we conclude that the new approach is particularly helpful for cases in which relaxation times need to be determined without having access to the associated peak position.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Functional soft materials from blue phase liquid crystals

Blue phase (BP) liquid crystals are chiral fluids wherein millions of molecules self-assemble into cubic lattices that are on the order of hundred nanometers. As the unit cell sizes of BPs are comparable to the wavelength of light, they exhibit selective Bragg reflections in the visible. The exploitation of the photonic properties of BPs for technological applications is made possible through photopolymerization, a process that renders mechanical robustness and thermal stability. We review here the preparation and characterization of stimuli-responsive, polymeric photonic crystals based on BPs. We highlight recent studies that demonstrate the promise that polymerized BP photonic crystals hold for colorimetric sensing and dynamic light control. We review using Landau–de Gennes simulations for predicting the self-assembly of BPs and the potential for using theory to guide experimental design. Finally, opportunities for using BPs to synthesize new soft materials, such as highly structured polymer meshes, are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microstructural and micromechanical characteristics of ultra-high performance concrete with superabsorbent polymer (SAP)

In this study, the hydration product, C-S-H density, and pore structure at different layers from the drying surface were measured. Besides, the zone affected by the released internal curing water from SAP was identified by assessing the nanoindentation modulus. The results found that the SAP affected the moisture distribution and changed the evaporation and self-desiccation rates in the inner and outer layers. Such imposed moisture gradients affected the micromechanical properties of UHPC at different layers due to the change in the hydration degree of the binder, the density of C-S-H, and the pore structure of the matrix. The addition of SAP improved the hydration dynamics and transferred the LD C-S-H into HD or UHD C-S-H. As the distance from the drying surface increased, the affected zone of SAP increased from 60 to 120 μm, showing the more effectiveness of SAP at inner layers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bottom-Up Meets Top-Down: The Crossroads of Multiscale Chromatin Modeling

Chromatin can be viewed as a hierarchically structured fiber that regulates gene expression. It consists of a complex network of DNA and proteins whose characteristic dynamical modes facilitate compaction and rearrangement in the cell nucleus. These modes stem from chromatin's fundamental unit, the nucleosome, and their effects are propagated across length scales. Understanding the effects of nucleosome dynamics on the chromatin fiber, primarily through post-translational modifications that occur on the histones, is of central importance to epigenetics. Within the last decade, imaging and chromosome conformation capture techniques have revealed a number of structural and statistical features of the packaged chromatin fiber at a hitherto unavailable level of resolution. Such experiments have led to increased efforts to develop polymer models that aim to reproduce, explain, and predict the contact probability scaling and density heterogeneity. At nanometer scales, available models have focused on the role of the nucleosome and epigenetic marks on local chromatin structure. At micrometer scales, existing models have sought to explain scaling laws and density heterogeneity. Less work, however, has been done to reconcile these two approaches: bottom-up and top-down models of chromatin. Here, we highlight the multiscale simulation models that are driving toward an understanding of chromatin structure and function, from the nanometer to the micron scale, and we highlight areas of opportunity and some of the prospects for new frameworks that bridge these two scales. Taken together, experimental and modeling advances over the last few years have established a robust platform for the study of chromatin fiber structure and dynamics, which will be of considerable use to the chromatin community in developing an understanding of the interplay between epigenomic regulation and molecular structure.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dynamic lost circulation materials (LCM) testing unit to reflect the condition of open and sealed fracture using fracture width of 1000 microns at 120 degrees F. Links to two papers based on the data - "Loss circulation prevention in geothermal drilling by shape memory polymer" which was published in Geothermics 89 (2021) 101943) as well as "Evaluating sealability of blended smart polymer and fiber additive for geothermal drilling with the effect of fracture opening size", published in the Journal of Petroleum Science and Engineering 206 (2021) 108998.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Filament Formation and Melt Spinning of Coal-Based Mesophase Pitch for Carbon Fiber Production

High-performance carbon fibers excel as high specific strength and modulus materials, and are utilized in composites applications ranging across aerospace, automotive, energy, infrastructure, and sports equipment sectors. Compared to PAN-based carbon fiber, mesophase pitch-based carbon fiber has lower tensile strength but provides a higher modulus, higher thermal conductivity, and a lower cost potential. However, challenges in stable, continuous melt spinning processing are a serious limiting factor. Unlike typical melt spinning of long, linear chain polymers, mesophase pitch is a comprised of relatively shorter polycyclic aromatic hydrocarbons which form a liquid crystal. In its ‘green’ or ‘as-spun’ state, the fibers are very fragile. Moreover, its temperature of processing is quite high, often approaching 400ºC. Complex flow dynamics combined with short length and time scale heat transfer render its melt spinning a formidable processing challenge. Improved understanding of the root causes for nascent filament breakage and spinning instabilities are needed. This work aims to determine fundamental phenomena that govern mesophase pitch filament formation by comparison of required draw force and uninterrupted spinning minutes with applied draw down ratio. The effect of perturbations on spinning stability are analyzed using capillary rheometry, microscopy of elongating filaments, and filtration.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Synthesis and Advanced Characterization of Polymer–Protein Core–Shell Nanoparticles

Enzyme immobilization techniques are widely researched due to their wide range of applications. Polymer–protein core–shell nanoparticles (CSNPs) have emerged as a promising technique for enzyme/protein immobilization via a self-assembly process. Based on the desired application, different sizes and distribution of the polymer–protein CSNPs may be required. This work systematically studies the assembly process of poly(4-vinyl pyridine) and bovine serum albumin CSNPs. Average particle size was controlled by varying the concentrations of each reagent. Particle size and size distributions were monitored by dynamic light scattering, ultra-small-angle X-ray scattering, small-angle X-ray scattering and transmission electron microscopy. Results showed a wide range of CSNPs could be assembled ranging from an average radius as small as 52.3 nm, to particles above 1 µm by adjusting reagent concentrations. In situ X-ray scattering techniques monitored particle assembly as a function of time showing the initial particle growth followed by a decrease in particle size as they reach equilibrium. The results outline a general strategy that can be applied to other CSNP systems to better control particle size and distribution for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Inter-Oligomer Interaction Influence on Photoluminescence in Cis-Polyacetylene Semiconductor Materials

Semiconducting conjugated polymers (CPs) are pivotal in advancing organic electronics, offering tunable properties for solar cells and field-effect transistors. Here, we carry out first-principle calculations to study individual cis-polyacetylene (cis-PA) oligomers and their ensembles. The ground electronic structures are obtained using density functional theory (DFT), and excited state dynamics are explored by computing nonadiabatic couplings (NACs) between electronic and nuclear degrees of freedom. We compute the nonradiative relaxation of charge carriers and photoluminescence (PL) using the Redfield theory. Our findings show that electrons relax faster than holes. The ensemble of oligomers shows faster relaxation compared to the single oligomer. The calculated PL spectra show features from both interband and intraband transitions. The ensemble shows broader line widths, redshift of transition energies, and lower intensities compared to the single oligomer. This comparative study suggests that the dispersion forces and orbital hybridizations between chains are the leading contributors to the variation in PL. It provides insights into the fundamental behaviors of CPs and the molecular-level understanding for the design of more efficient optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Entanglement phase transitions in random stabilizer tensor networks

Here we explore a class of random tensor network models with “stabilizer” local tensors which we name random stabilizer tensor networks (RSTNs). For RSTNs defined on a two-dimensional square lattice, we perform extensive numerical studies of entanglement phase transitions between volume-law and area-law entangled phases of the one-dimensional boundary states. These transitions occur when either (a) the bond dimension D of the constituent tensors is varied or (b) the tensor network is subject to random breaking of bulk bonds, implemented by forced measurements. In the absence of broken bonds, we find that the RSTN supports a volume-law entangled boundary state with bond dimension D ≥ 3 where D is a prime number, and an area-law entangled boundary state for D = 2. Upon breaking bonds at random in the bulk with probability p, there exists a critical measurement rate p c for each D ≥ 3 above which the boundary state becomes area-law entangled. To explore the conformal invariance at these entanglement transitions for different prime D, we consider tensor networks on a finite rectangular geometry with a variety of boundary conditions, and extract universal operator scaling dimensions via extensive numerical calculations of the entanglement entropy, mutual information, and mutual negativity at their respective critical points. Our results at large D approach known universal data of percolation conformal field theory, while showing clear discrepancies at smaller D, suggesting a distinct entanglement transition universality class for each prime D. We further study universal entanglement properties in the volume-law phase and demonstrate quantitative agreement with the recently proposed description in terms of a directed polymer in a random environment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Opening twisted polymer chains for simultaneously high printability and battery fast-charge

Fast-charging is key to the widespread adoption of battery-based electric vehicles. However, improving fast-charging through architecture optimization is expensive. To reduce costs and expand to commercialization, we applied roll-to-roll screen printing technology to create channels and decrease the tortuosity of electrodes. For the first time, this work successfully opened twisted polymer chains within high-solid-content inks to improve their screen printability and battery performance of as-printed electrodes. With LiNi 0.6 Mn 0.2 Co 0.2 O 2 as active materials, the 60% solid content ink presents superior screen printability after opening the twisted binder chains. As-printed electrode exhibits 33% higher charge capacity at 6 C than printed electrode with chains twisted ink at mass loading of 6.5 mg/cm 2 . Furthermore, coarse-grained molecular dynamics simulations are performed to study the underlying mechanism systematically. In conclusion, the new ink preparation procedure provides a scalable, effective strategy for manufacturing screen-printable battery ink and promotes screen-printed electrode technology.

25 ENERGY STORAGE↗
DOE OSTI2022

Hierarchical Self-Assembly Pathways of Peptoid Helices and Sheets

Peptoids (N-substituted glycines) are a class of tailorable synthetic peptidomic polymers. Amphiphilic diblock peptoids have been engineered to assemble 2D crystalline lattices with applications in catalysis and molecular separations. Assembly is induced in an organic solvent/water mixture by evaporating the organic phase, but the assembly pathways remain uncharacterized. We conduct all-atom molecular dynamics simulations of Nbrpe6Nc6 as a prototypical amphiphilic diblock peptoid comprising an NH 2 -capped block of six hydrophobic N-((4-bromophenyl)ethyl)glycine residues conjugated to a polar NH 3 (CH 2 ) 5 CO tail. We identify a thermodynamically controlled assembly mechanism by which monomers assemble into disordered aggregates that self-order into 1D chiral helical rods then 2D achiral crystalline sheets. We support our computational predictions with experimental observations of 1D rods using small-angle X-ray scattering, circular dichroism, and atomic force microscopy and 2D crystalline sheets using X-ray diffraction and atomic force microscopy. Furthermore, this work establishes a new understanding of hierarchical peptoid assembly and principles for the design of peptoid-based nanomaterials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Proton Diffusion in Liquid 1,2,3-Triazole Studied by Incoherent Quasi-Elastic Neutron Scattering

Improving the proton transport in polymer electrolytes impacts the performance of next-generation solid-state batteries. However, little is known about proton conductivity in nonaqueous systems due to the lack of an appropriate level of fundamental understanding. Here, we studied the proton transport in small molecules with dynamic hydrogen bonding, 1,2,3-triazole, as a model system of proton hopping in a nonaqueous environment using incoherent quasi-elastic neutron scattering. By using the jump-diffusion model, we identified the elementary jump-diffusion motion of protons at a much shorter length scale than those by nuclear magnetic resonance and impedance spectroscopy for the estimated long-range diffusion. In addition, a spatially restricted diffusive motion was observed, indicating that proton motion in 1,2,3-triazole is complex with various local correlated dynamics. In conclusion, these correlated dynamics will be important in elucidating the nature of the proton dynamics in nonaqueous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polymer Architecture-Induced Trade-off between Conductivities and Transference Numbers in Salt-Doped Polymeric Ionic Liquids

Recent experiments have demonstrated that polymeric ionic liquids that share the same cation and anion but possess different architectures can exhibit markedly different conductivity and transference number characteristics when doped with lithium salt. In this study, we used atomistic molecular simulations on polymer chemistries inspired by the experiments to probe the mechanistic origins underlying the competition between conductivity and transference numbers. Our results indicate that the architecture of the polycationic ionic liquid plays a subtle but crucial role in modulating the anion–cation interactions, especially their dynamical coordination characteristics. Chemistries leading to longer-lived anion–cation coordinations relative to lithium–anion coordinations lead to lower conductivities and higher transference numbers. Furthermore, our results suggest that higher conductivities are accompanied by lower transference numbers and vice versa, revealing that alternative approaches may need to be considered to break this trade-off in salt-doped polyILs.

33 ADVANCED PROPULSION SYSTEMS↗