SEARCH · Engineering Papers

Results for “Dynamic Pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Effects of damping on mode shapes, volume 1

Displacement, velocity, and acceleration admittances were calculated for a realistic NASTRAN structural model of space shuttle for three conditions: liftoff, maximum dynamic pressure and end of solid rocket booster burn. The realistic model of the orbiter, external tank, and solid rocket motors included the representation of structural joint transmissibilities by finite stiffness and damping elements. Methods developed to incorporate structural joints and their damping characteristics into a finite element model of the space shuttle, to determine the point damping parameters required to produce realistic damping in the primary modes, and to calculate the effect of distributed damping on structural resonances through the calculation of admittances.

Gates, R. M.↗

NASA NTRS1976

Results of the plasma analyzer experiment on Pioneers 10 and 11

The plasma-analyzer experiments on Pioneers 10 and 11 have determined that the characteristics of the solar-wind interaction with the Jovian magnetosphere are basically similar to those observed for the solar-wind interaction of earth and differ mainly in terms of the scale size of the interaction. The Jovian magnetosheath flow field and the calculated normals to the Jovian magnetosphere indicate that the Jovian magnetosphere is extremely thick and blunt in shape. The size of the Jovian magnetosphere in the sunward (dayside) direction can change by as much as a factor of two in response to relatively minor changes in solar-wind dynamic pressure. The outer dayside Jovian magnetosphere is inflated with a high-beta thermal plasma.

Intriligator, D. S.↗

NASA NTRS1977

The July climate and a comparison of the January and July climates simulated by the GISS general circulation model

Results are presented for a study directed to evaluate the ability of the global general circulation model of the Goddard Institute for Space Studies (GISS) in simulating seasonal differences as related to an experiment simulating the July climatology which parallels the January simulation presented by Somerville et al. (1974). The July and January simulations are compared with each other and with climatological data on seasonal changes, mainly for the Northern Hemisphere troposphere. The comparison shows that the model-generated energy cycle, distribution of winds, temperature, humidity and pressure, dynamical transports, diabatic heating, evaporation, precipitation and cloud cover are all realistic for the Northern Hemisphere troposphere in July. The model's simulation of seasonal differences is generally quite realistic since the systematic quantitative errors do not affect the simulation of relative changes, to first order. Defects that could seriously bias the model's performance in particular climate experiments are identified and discussed.

Stone, P. H.↗

NASA NTRS1976

Synthesis techniques for insensitive aircraft control systems

Comparative evaluation of seven insensitive synthesis techniques applied to the control of the longitudinal axis and symmetric flexure modes of the C-5A aircraft is described. These techniques have the common goal of achieving insensitivity to parameter uncertainties and unmodeled dynamics. For this comparison, the 'complete' model was assumed to consist of rigid body dynamics, fifteen flexure modes, unsteady aerodynamics, gust dynamics, and first order actuators for two control inputs. Thirteen flexure modes and the unsteady aerodynamics were treated as neglected dynamics. Dynamic pressure, structural frequency and damping, and the stability derivative were treated as uncertain parameters. Design specifications consisted of a transient response criterion, statistical response criteria, eigenvalue criteria and stability margins. A nominal controller designed without regard to sensitivity served as a benchmark for performance comparisons of the insensitive controllers.

Harvey, C. A.↗

NASA NTRS1977

Theoretical prediction of over-wing-blowing aerodynamics

A theoretical method is developed for predicting the aerodynamic characteristics of wings with over-wing-blowing jet. The method allows the jet to stay above the wing surface as well as to wash the surface. It accounts for the wing-jet interaction due to differences between the jet and freestream dynamic pressures and Mach numbers, in addition to the jet entrainment. For the former effect, the quasi-vortex-lattice method is used to satisfy the jet and wing boundary conditions. For the latter, a new theory was developed to calculate the jet entrained flow for given jet properties. Comparison of predicted results with available data of various configurations shows reasonably good agreement. Further theoretical analysis indicates that it is aerodynamically advantageous to locate the jet exit near and ahead of the wing leading edge, and that the camber shape has significant effect on the induced drag.

Lan, C. E.↗

NASA NTRS1977

Aerodynamics of horizontally-opposed aircraft engine installations

The goal of cooling installation design is to provide adequate cooling air flow to the engine with a minimum drag penalty. To achieve this goal, attention must be given to certain aerodynamic factors involved in the design problem. In the present paper, the factors which influence the aerodynamic design of horizontally-opposed engine cooling installations are discussed with particular reference to the performance of the aircraft in terms of the dynamic pressure generated for the power output of the engine, the gains or losses through the propeller, proper inlet design, altitude effects on the orifice characteristics of the engine, and exit area sizing. Results of a flight research program showed that the inlet design has a significant influence on cooling effectiveness and drag; the inlet should be designed for low velocity ratios and should avoid small radii of curvature in its geometry. The influence of the propeller on the inlet appears to cause the stagnation point on the lip to move toward the inside.

Miley, S. J.↗

NASA NTRS1977

Aerodynamic characteristics of a small-scale straight and swept-back wing with knee-blown jet flaps

Two sting-mounted, 50.8 cm (20 in.) span, knee-blown, jet-flap models were tested in a large (2.1- by 2.5-m (7- by 10-ft) subsonic wind tunnel. A straight- and swept-wing model were tested with fixed flap deflection with various combinations of full-span leading-edge slats. The swept-wing model was also tested with wing tip extensions. Data were taken at angles-of-attack between 0 deg and 40 deg, at dynamic pressures between 143.6 N/sq m (3 lb/sq ft) and 239.4 N/sq m (5 lb/sq ft), and at Reynolds numbers (based on wing chord) ranging from 100,000 to 132,000. Jet flap momentum blowing coefficients up to 10 were used. Lift, drag, and pitching-moment coefficients, and exit flow profiles for the flap blowing are presented in graphical form without analysis.

Morehouse, G. G.↗

NASA NTRS1978

Internal performance predictions for Langley scramjet engine module

A one dimensional theoretical method for the prediction of the internal performance of a scramjet engine is presented. The effects of changes in vehicle forebody flow parameters and characteristics on predicted thrust for the scramjet engine were evaluated using this method, and results are presented. A theoretical evaluation of the effects of changes in the scramjet engine's internal parameters is also presented. Theoretical internal performance predictions, in terms thrust coefficient and specific impulse, are provided for the scramjet engine for free stream Mach numbers of 5, 6, and 7 free stream dynamic pressure of 23,940 N/sq m forebody surface angles of 4.6 deg to 14.6 deg, and fuel equivalence ratio of 1.0.

Pinckney, S. Z.↗

NASA NTRS1978

Development and application of an optimization procedure for flutter suppression using the aerodynamic energy concept

An optimization procedure is developed based on the responses of a system to continuous gust inputs. The procedure uses control law transfer functions which have been partially determined by using the relaxed aerodynamic energy approach. The optimization procedure yields a flutter suppression system which minimizes control surface activity in a gust environment. The procedure is applied to wing flutter of a drone aircraft to demonstrate a 44 percent increase in the basic wing flutter dynamic pressure. It is shown that a trailing edge control system suppresses the flutter instability over a wide range of subsonic mach numbers and flight altitudes. Results of this study confirm the effectiveness of the relaxed energy approach.

Nissim, E.↗

NASA NTRS1946

Possibilities for drag reduction by boundary layer control

The mechanics of laminar boundary layer transition are reviewed. Drag possibilities for boundary layer control are analyzed using assumed conditions of transition Reynolds number, inlet loss, number of slots, blower efficiency, and duct losses. Although the results of such analysis are highly favorable, those obtained by experimental investigations yield conflicting results, showing only small gains, and sometimes losses. Reduction of this data indicates that there is a lower limit to the quantity of air which must be removed at the slot in order to stabilize the laminar flow. The removal of insufficient air permits transition to occur while the removal of excessive amounts of air results in high power costs, with a net drag increases. With the estimated value of flow coefficient and duct losses equal to half the dynamic pressure, drag reductions of 50% may be obtained; with twice this flow coefficient, the drag saving is reduced to 25%.

Naiman, I.↗

NASA NTRS1977

YF 102 in-duct combustor noise measurement, volume 1

The combustion chamber from a YF 102 gas turbine engine was instrumented with semi-infinite acoustic wave guide probes and installed in a test rig to complement the combustor noise test. These combustor rig tests are described and the recorded data are listed. Internal dynamic pressure level measurements were made at the same locations and at the same operating conditions of the NASA YF 102 test. In addition, the combustor was operated at various off-designed points where one parameter at a time was varied. Background noise recordings were made to determine the magnitude of facility or test rig noise present.

Wilson, C. A.↗

NASA NTRS1978

Low-speed test limit of V/STOL model located vertically off-center

A vertically off-centered V/STOL model - a 2-ft-diam three-bladed aluminum propeller operating in a rotor mode - is tested in an 8 by 12 ft wind tunnel with and without ground plane along with an associated 3 by 4.5 ft test section insert. The objective was to assess the effect of the vertically off-centered model on the low-speed test limit. The aerodynamic data of the model at a constant negative angle of attack (-3 deg) are recorded at selected tunnel dynamic pressures to provide adequate data points to define the model lift variation with respect to the tip speed ratio. The adverse effect of the rotor low-speed test limit is observed in the form of lift change with respect to the tip speed ratio. A major conclusion is that for rotors tested with a ground plane or in the vicinity of the floor, the ratio of distance between floor and model to rotor radius defines the low-speed test limits.

Shindo, S.↗

NASA NTRS1976

EDIN design study alternate space shuttle booster replacement concepts. Volume 1: Engineering analysis

The use of a recoverable liquid rocket booster (LRB) system to replace the existing solid rocket booster (SRB) system for the shuttle was studied. Historical weight estimating relationships were developed for the LRB using Saturn technology and modified as required. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the study designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut off points of the shuttle reference mission 1. Performance analysis is based on a point design trajectory model which optimizes initial tilt rate and exoatmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle of attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary. Four basic configurations were investigated: a parallel burn vehicle with an F-1 engine powered LRB; a parallel burn vehicle with a high pressure engine powered LRB; a series burn vehicle with a high pressure engine powered LRB. The relative sizes of the LRB and the ET are optimized to minimize GLOW in most cases.

Demakes, P. T.↗

NASA NTRS1976

EDIN design study alternate space shuttle booster replacement concepts. Volume 2: Design simulation results

Historical weight estimating relationships were developed for the liquid rocket booster (LRB) using Saturn technology, and modified as required to support the EDIN05 study. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the EDIN05 designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut-off points. Performance analysis was based on a point design trajectory model which optimized initial tilt rate and exo-atmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle-of-attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary.

Demakes, P. T.↗

NASA NTRS1979

YF-17/ADEN system study

The YF-17 aircraft was evaluated as a candidate nonaxisymmetric nozzle flight demonstrator. Configuration design modifications, control system design, flight performance assessment, and program plan and cost we are summarized. Two aircraft configurations were studied. The first was modified as required to install only the augmented deflector exhaust nozzle (ADEN). The second one added a canard installation to take advantage of the full (up to 20 deg) nozzle vectoring capability. Results indicate that: (1) the program is feasible and can be accomplished at reasonable cost and low risk; (2) installation of ADEN increases the aircraft weight by 600 kg (1325 lb); (3) the control system can be modified to accomplish direct lift, pointing capability, variable static margin and deceleration modes of operation; (4) unvectored thrust-minus-drag is similar to the baseline YF-17; and (5) vectoring does not improve maneuvering performance. However, some potential benefits in direct lift, aircraft pointing, handling at low dynamic pressure and takeoff/landing ground roll are available. A 27 month program with 12 months of flight test is envisioned, with the cost estimated to be $15.9 million for the canard equipped aircraft and $13.2 million for the version without canard. The feasiblity of adding a thrust reverser to the YF-17/ADEN was investigated.

Gowadia, N. S.↗

NASA NTRS1979

Space Shuttle Solid Rocket Booster Decelerator Subsystem Rocket Sled Test Program

A rocket sled test was performed as part of the development test program of the Space Shuttle Solid Rocket Booster (SRB) Decelerator Subsystem. The test objectives were to evaluate the nose cap/pilot chute deployment behavior and performance. The tests were performed by accelerating the sled and test article to the desired deployment conditions and then ejecting the SRB nose cap by firing three 30,000-lb thrusters. The nose cap then deployed the pilot chute (11.5-ft diam) which, in turn, initiated drogue chute pack deployment. Text conditions simulated the design deployment environment of dynamic pressure of 200 and 270 psf (corresponding sled velocities of 445 and 530 ft/s) and were conducted in configurations representative of SRB (solid rocket booster) angles of attack of 80 and 140 deg, respectively. A test description and summary of results are presented.

Kross, D. A.↗

NASA NTRS1978

The effect of normal atmospheric variability on Space Shuttle Orbiter entry performance

The Space Shuttle Orbiter is controlled during entry by a combination of aerodynamic surfaces composed of elevons, a body flap, and a rudder that flares as a speedbrake, and a reaction control system that uses 16 small rocket thrusters. To determine the effects of realistic atmospheric density variations on reentry, a series of Monte Carlo trajectories were generated for each season. The performance parameters analyzed include maximum hinge moments experienced by the aerodynamic control surfaces, the maximum deflections experienced by the aerodynamic control surfaces, a range of angle-of-sideslip values, maximum dynamic pressure, maximum stagnation point heat rate, and state conditions at touchdown. The results of the investigation indicate that the Orbiter guidance and control systems could tolerate atmospheric variability without failures in the control system hardware.

Powell, R. W.↗

NASA NTRS1979

Sunspots and the physics of magnetic flux tubes. III - Aerodynamic lift

The aerodynamic lift exerted on a magnetic flux tube by the asymmetric flow around the two sides of the tube is calculated as part of an investigation of the physics of solar flux tubes. The general hydrodynamic forces on a rigid circular cylinder in a nonuniform flow of an ideal fluid are derived from the first derivatives of the velocity field. Aerodynamic lift in a radial nonuniform flow is found to act in the direction of the flow, toward the region of increased flow velocity, while in a shear flow, lift is perpendicular to the free stream and directed toward increasing flow velocity. For a general, three dimensional, large-scale stationary incompressible equilibrium flow, an expression is also derived relating the lift per unit length to the dynamical pressure, cylinder radius and the gradient of the free-stream velocity. Evidence from an asymmetric airfoil in a uniform flow indicates that lift is enhanced in a real fluid in the presence of turbulence.

Parker, E. N.↗