Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Carrier capture and emission by substitutional carbon impurities in GaN vertical diodes

A model was developed for the operation of a GaN pn junction vertical diode which includes rate equations for carrier capture and thermally activated emission by substitutional carbon impurities and carrier generation by ionizing radiation. The model was used to simulate the effect of ionizing radiation on the charge state of carbon. These simulations predict that with no applied bias, carbon is negatively charged in the n-doped layer, thereby compensating n-doping as experimentally observed in diodes grown by metal-organic chemical vapor deposition. With reverse bias, carbon remains negative in the depletion region, i.e., compensation persists in the absence of ionization but is neutralized by exposure to ionizing radiation. This increases charge density in the depletion region, decreases the depletion width, and increases the capacitance. The predicted increase in capacitance was experimentally observed using a pulsed 70 keV electron beam as the source of ionization. In additional confirming experiments, the carbon charge-state conversion was accomplished by photoionization using sub-bandgap light or by the capture of holes under forward bias.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous wave room temperature operation of the 2 $μ$m GaSb-based photonic crystal surface emitting diode lasers

Continuous wave room temperature operation of 2 μm GaSb-based photonic-crystal surface-emitting diode lasers has been realized. The deep etched square mesa devices showed threshold current densities of 500 A/cm 2 at 20 °C. The epi-side down mounted lasers generated above 10 mW of output power in the continuous wave regime and tens of milliwatts in pulses from the 200 × 200 μm 2 aperture. Here, the breakthrough in the device performance parameters was achieved thanks to a highly homogeneous air-pocket retaining epitaxial regrowth process optimized for a specifically designed antimonide diode laser heterostructure. The nanofabrication method utilizing low temperature atomic hydrogen surface cleaning yielded low disorder square lattice of droplet-shaped voids covered by uniform p-cladding layer. The laser emission spectrum as well as near/far field patterns demonstrated peculiar features presumably linked to deformation of the void shape during regrowth and formation of the array of filaments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

7.86 kV GaN-on-GaN PN power diode with BaTiO3 for electrical field management

Devices based on gallium nitride (GaN) have great potential for high power switching applications due to the high breakdown field and high electron mobility. In this work, we present a vertical GaN-on-GaN PN power diode using high dielectric constant material, BaTiO3, for electrical field management and high breakdown voltages, in together with an optimized guard-ring and field plate design. Numerical simulation shows that with high-k dielectrics implemented, the peak electrical field at the PN interface is mitigated from 3.5 to 3.1 MV/cm under a reverse bias of −9.05 kV. The device design with BaTiO3 shows a breakdown voltage of 9.65 kV or about 600 V improvement. The fabricated diodes with a 57 μm thick drift layer demonstrate a breakdown voltage of 7.86 kV on a bulk GaN substrate. The device has an on-resistance of 2.8 mΩ cm2 and a Baliga figure of merit of 22 GW/cm2.

Physics↗

Superconducting diode effect in two-dimensional topological insulator edges and Josephson junctions

The superconducting diode effect—the dependence of critical current on its direction—can arise from the simultaneous breaking of inversion and time-reversal symmetry in a superconductor and has gained interest for its potential applications in superconducting electronics. In this Letter, we study the effect in a two-dimensional topological insulator (2D TI) in both a uniform geometry as well as in a long Josephson junction. We show that in the presence of Zeeman fields, a circulating edge current enables a large non-reciprocity of the critical current. We find a maximum diode efficiency of 1 for the uniform 2D TI and (2−1)2≈0.17 for the long Josephson junction.

Physics↗

Robust and symmetric magnetic field dependency of superconducting diode effect in asymmetric Dirac semimetal SQUIDs

The recent demonstration of the superconducting diode effect (SDE) has generated renewed interest in superconducting electronics, in which devices such as compact superconducting diodes that can perform signal rectification with low-energy operations are needed. In this article, we present our results of robust and symmetric-in-magnetic-field SDE in asymmetric superconducting quantum interference devices (SQUIDs) realized in high-quality Dirac semimetal Cd 3 As 2 thin film grown by the molecular beam epitaxy technique. Consistent with previous work, a zero magnetic field SDE is observed. Furthermore, the difference in switching current is independent of the strength and polarity of an out-plane magnetic field in the range of −10 and 10 mT. We speculate that this robust symmetric-in-field SDE in our Dirac semimetal SQUIDs is due to the formation of helical spin texture, theoretically predicted in Dirac semimetals.

Current-voltage characteristic↗

Transversely diode-pumped passively Q-switched erbium glass laser emitter

The properties of a laser diode array-pumped passively Q-switched ytterbium-erbium glass laser emitter are studied. It is found experimentally that the maximum output energy is achieved when the diameter of the TEM{sub 00} mode is 0.65-0.77 of the transverse size of the active element. By using two 100-W linear laser diode arrays with the output power not exceeding 70% of the maximum power, 5 mJ was achieved in a 50-ns diffraction-limited single pulse for the efficiency (with respect to the pump radiation energy) of 1.35%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-power laser diodes based on triple integrated InGaAs/AlGaAs/GaAs structures emitting at 0.9 {mu}m

Ternary vertically integrated lasers based on the InGaAs/AlGaAs/GaAs heterostructure grown by the method of MOS hydride epitaxy in a single epitaxial process are studied. The typical slope of the watt-ampere characteristic for a triple laser diode is 2.6 W A{sup -1}. The frequency characteristics and temperature dependences of the optical power on the pump power demonstrate good homogeneity of the grown structures. Laser diodes based on the triple laser heterostructure (the stripe contact width is 200 {mu}m and the cavity length is 1 mm) emit 80 W at 0.9 {mu}m in the pulsed regime at the injection current of 40 A. (lasers)

36 MATERIALS SCIENCE↗

Measurement of the absorption line profiles of water vapour isotopomers at 1.39 {mu}m using the methods of diode laser spectroscopy

The issues related to high-precision measurement of the absorption line profiles of water vapour and its isotopomers using the methods of diode laser spectroscopy in the near IR range aimed at the analysis and detection of greenhouse gases are considered. The absorption line shape of H{sub 2}{sup 16}O is investigated as a function of pressure of different buffer gases. The influence of the instrument function of the diode laser (DL) on the precision of measuring the line profile is studied. From fitting the profile of Doppler-broadened H{sub 2}{sup 16}O absorption line to a model profile the lasing line width of the DL with a fibre pigtail is determined. The frequencies and intensities of absorption lines of water isotopomers H{sub 2}{sup 16}O, H{sub 2}{sup 17}O, H{sub 2}{sup 18}O, and HDO are measured in the range of DL oscillation. Analytical spectral regions are chosen for distant probing of water vapour using an airborne lab. (laser spectroscopy)

74 ATOMIC AND MOLECULAR PHYSICS↗

Generation of nanosecond laser pulses at a 2.2-MHz repetition rate by a cw diode-pumped passively Q-switched Nd{sup 3+}:YVO{sub 4} laser

We report a new configuration of a high-repetition rate nanosecond laser based on a semiconductor saturable absorber mirror (SESAM). The SESAM is conventional technical solution for passive mode-locking at 1064 nm and simultaneously used as a highly reflecting mirror and a saturable absorber in a high-Q and short cavity of a cw diode-end-pumped a-cut Nd{sup 3+}:YVO{sub 4} laser. Two laser beams are coupled out from the cavity using an intracavity low-reflection thin splitter. The laser characteristics are investigated as functions of pump and resonator parameters. Using a 1.8-W cw pump laser diode at 808 nm, the passively Q-switched SESAMbased laser generates 22-ns pulses with an average power of 275 mW at a pulse repetition rate of 2250 kHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling of a diode laser with a resonant grating of quantum wells and an external mirror

A three-dimensional numerical model of a diode laser with a resonant grating of quantum wells (QWs) and an external mirror is developed and used to calculate diode laser pulses that are long compared to the time of reaching a stationary regime and are short enough to neglect heating of the medium. The consistent solutions of the Helmholtz field equation and the system of diffusion equations for inversion in each QW are found. A source of charge carriers can be both an electron beam and a pump laser beam. The calculations yielded the longitudinal and radial profiles of the generated field, as well as its wavelength and power. The effective threshold pump current is determined. In the created iteration algorithm, the calculation time linearly increases with the number of QWs, which allows one to find the characteristics of lasers with a large number of QWs. The output powers and beam divergence angles of a cylindrical laser are calculated for different cavity lengths and pump spot radii. After calculating the fundamental mode characteristics, high-order modes were additionally calculated on the background of the frozen carrier distributions in the QW grating. It is shown that all the competing modes remain below the excitation threshold for the pump powers used in the experiment. The calculated and experimental data for the case of pumping by a nanosecond electron beam are qualitatively compared.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser diode bars based on strain-compensated AlGaPAs/GaAs heterostructures

Traditional (in the AlGaAs/GaAs system) and phosphorus-compensated (in the AlGaAs/AlGaPAs/GaAs system) laser heterostructures emitting at a wavelength of 850 nm are grown by MOVPE and studied. Laser diode bars are fabricated and their output characteristics are studied. The method used to grow heterolayers allowed us to control (minimise) mechanical stresses in the AlGaPAs/GaAs laser heterostructure, which made it possible to keep its curvature at the level of the initial curvature of the substrate. It is shown that the use of a compensated AlGaPAs/GaAs heterostructure improves the linear distribution of emitting elements in the near field of laser diode arrays and allows the power - current characteristic to retain its slope at high pump currents owing to a uniform contact of all emitting elements with the heat sink. The radius of curvature of the grown compensated heterostructures turns out to be smaller than that of traditional heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation from a semiconductor target excited by an electron beam in a gas diode

Radiation from a semiconductor target excited by an electron beam in a gas-filled diode was investigated at different gas (air) pressures. Subnanosecond high-voltage pulses (up to 200 kV) were applied to the pointed cathode of the diode. The targets in the form of a 15 - 20-{mu}m-thick single-crystal CdS film with reflecting coatings forming an optical cavity and 0.7 - 1-mm-thick ZnSe plates were used. As the air pressure increased from 0.1 to 5 Torr, a decrease in the amplitude and duration of laser radiation pulses from the targets was observed. Lasing ({lambda} = 520 nm) of CdS targets terminated at pressures greater than 2.2 Torr. The laser pulse duration varied from 125 to 20 ps. The study of the dynamics of radiation from ZnSe targets ({lambda} = 460 nm) at atmospheric pressure showed that when the gap between the target and the electrodes was 0.2 - 1 mm thick, an intense near-surface glow was observed that consisted of a few pulses with the duration from 20 to 100 ps, caused by runaway electrons. Investigations showed that the runaway electrons may play an essential role in the excitation of semiconductors by subnanosecond high-voltage pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An experimental study of low-frequency amplitude noise in a fibre Bragg grating laser diode

We have studied the amplitude noise in a fibre Bragg grating laser diode. It has been shown that discontinuities in noise characteristics correlate with those in the power – current and spectral characteristics of the laser diode, whereas the noise characteristics of the pump source have no such discontinuities. The highest noise level has been observed at pump currents corresponding to concurrent generation of two longitudinal modes. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of thermal processes on critical operation conditions of high-power laser diodes

Using numerical and analytical techniques in a threedimensional approximation, we have modelled the effect of spatial thermoelastic stress nonuniformity in a laser diode – heat sink system on the output characteristics of the device in different operation modes. We have studied the influence of the pulse duration, the geometry of the laser system and its thermophysical parameters on the critical pump current density, in particular for state-of-the-art heat conductive substrate materials. The proposed approach has been used to optimise the laser diode assembly process in terms of the quality of laser crystal positioning (bonding) on a heat sink. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

AlGaAs/GaAs laser diode bars (λ = 808 nm) with improved thermal stability

Two series of AlGaAs/GaAs laser heterostructures have been grown by metal-organic vapour phase epitaxy, and 808-nm laser diode bars fabricated from the heterostructures have been investigated. The heterostructures differed in waveguide thickness and quantum well depth. It is shown that increasing the barrier height for charge carriers in the active region has an advantageous effect on the output parameters of the laser sources in the case of the heterostructures with a narrow symmetric waveguide: the slope of their power – current characteristics increased from 0.9 to 1.05 W A{sup -1}. Thus, the configuration with a narrow waveguide and deep quantum well is better suited for high-power laser diode bars under hindered heat removal conditions. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser radiation of CdS{sub x}Se{sub 1-x} targets in a gas diode

Laser radiation of semiconductor targets of CdS{sub x}Se{sub 1-x} solid solutions excited by an electron beam in a gas-filled diode was investigated at constant and varying gas pressures. In the first case, lasing was excited by an electron beam with an energy of 170 keV and a duration of 100 ps in semiconductor targets with different x. The highest powers 125 and 96 kW were achieved at x ≈ 0.2 (λ ≈ 677 nm) and x ≈ 1 (λ ≈ 522 nm), respectively. The minimum power (26 kW) was observed in the yellow-green spectral region. The maximum slope efficiency in these experiments reached 9%. In the second case, the radiation power of CdS targets (x = 1) was studied as a function of the air pressure in the gas diode varying from 0.1 to 2.5 Torr. The experimental data well agree with the calculation results. The possibility of reducing the radiation divergence by using a conical optical fibre is demonstrated. At the lasing threshold of semiconductor targets exited by an electron beam or a streamer discharge, filamentary channels appear due to, probably, an anisotropy of the impact ionisation coefficient. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Wide-aperture laser diode array in the external V-shaped cavity

The operation of a wide-aperture laser diode array with the radiation wavelength 980 nm in external V-shaped symmetric and asymmetric cavities is experimentally studied. The regimes of stable oscillation are studied as functions of the feedback beam direction. The spectra and the intensity distribution of radiation in the far zone are presented for the laser diode in symmetric and asymmetric cavities. Tuning of the radiation wavelength is demonstrated using the Littman geometry in the asymmetric cavity. (lasers)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗