Results for “Digitizer Evaluation” — Page 48

NASA NTRS1980

Quantitative analysis of autoradiographic image intensification using Thiourea-S35

Photographic images enhanced by the method of Thiourea-S35 autoradiography are evaluated in terms of signal-to-noise ratio, detective quantum efficiency (DQE), and Wiener spectrum analysis using digitized images. It is determined that the original signal-to-noise ratio is not degraded by the intensification process which allows an increase in the practical working DQE as a function of density. These results apply at all spatial frequencies that were tested. The advantage given by autoradiography is the ability to produce usable images from emulsions originally exposed to the low densities corresponding to maximum DQE and movement of faint image densities above the level of the threshold for detection.

Askins, B. S.↗

NASA NTRS1981

Land cover classification accuracy as a function of sensor spatial resolution

The benefits obtained from sensor systems for monitoring earth resources will depend on the application and interpretation methods used. A frequently used analysis method is supervised per-pixel multispectral classification with a typical application being land cover classification. An investigation is conducted to evaluate the effect of spatial resolution on the ability to classify land cover types with per-pixel digital image classification techniques. Attention is also given to the documentation of changes in scene noise and the percentage of boundary pixels as a function of spatial resolution, in order to improve the understanding of the interrelationship between classification accuracy and spatial resolution. It is found that scene noise varies considerably between land cover categories. Changes in scene noise with coarsening resolution occur at different rates for different categories.

Markham, B. L.↗

NASA NTRS1981

Neotectonics of the San Andreas Fault system: Basin and range province juncture

A thorough evaluation of all LANDSAT coverage of the study area (considering atmospheric clarity, seasonal aspects, specific swath location, and digital quality) resulted in the selection of two consecutive (continuously recorded) scenes for detailed analyses. The acquisition of HCMM and SEASAT imagery as well as high altitude U-2 uniform coverage is being considered. A bibliography of previous geological studies and methodological examples is estimated to be 70% complete.

Estes, J. E.↗

NASA NTRS1984

Irrigated rice area estimation using remote sensing techniques: Project's proposal and preliminary results

The development of a methodology for annual estimates of irrigated rice crop in the State of Rio Grande do Sul, Brazil, using remote sensing techniques is proposed. The project involves interpretation, digital analysis, and sampling techniques of LANDSAT imagery. Results are discussed from a preliminary phase for identifying and evaluating irrigated rice crop areas in four counties of the State, for the crop year 1982/1983. This first phase involved just visual interpretation techniques of MSS/LANDSAT images.

Parada, N. D. J.↗

NASA NTRS1986

Development of HIDEC adaptive engine control systems

The purpose of NASA's Highly Integrated Digital Electronic Control (HIDEC) flight research program is the development of integrated flight propulsion control modes, and the evaluation of their benefits aboard an F-15 test aircraft. HIDEC program phases are discussed, with attention to the Adaptive Engine Control System (ADECS I); this involves the upgrading of PW1128 engines for operation at higher engine pressure ratios and the production of greater thrust. ADECS II will involve the development of a constant thrust mode which will significantly reduce turbine operating temperatures.

Landy, R. J.↗

NASA NTRS1987

Regional and seasonal variations of surface reflectance from satellite observations at 0.6 micron

A global series of seasonal visible surface reflectance maps derived from NOAA-5 Scanning Radiometer observations is presented. Methods for isolating clear-sky observations from satellite data are evaluated and the magnitude of atmospheric effects (Rayleigh scattering and ozone absorption) are presented. A preliminary analysis of digital vegetation and soils data bases, which were analyzed in conjunction with the satellite observations, is discussed. Regional and global reflectance homogeneity of land-cover types, and snow brightening for types, are presented. Results demonstrate that the statistical approach for isolating clear-sky radiances used in this study obtains accurate enough values for each location to allow meaningful measurements of seasonal, spatial and ecosystem variations in surface reflectance.

Matthews, Elaine↗

NASA NTRS1994

Laboratory and in-flight experiments to evaluate 3-D audio display technology

Laboratory and in-flight experiments were conducted to evaluate 3-D audio display technology for cockpit applications. A 3-D audio display generator was developed which digitally encodes naturally occurring direction information onto any audio signal and presents the binaural sound over headphones. The acoustic image is stabilized for head movement by use of an electromagnetic head-tracking device. In the laboratory, a 3-D audio display generator was used to spatially separate competing speech messages to improve the intelligibility of each message. Up to a 25 percent improvement in intelligibility was measured for spatially separated speech at high ambient noise levels (115 dB SPL). During the in-flight experiments, pilots reported that spatial separation of speech communications provided a noticeable improvement in intelligibility. The use of 3-D audio for target acquisition was also investigated. In the laboratory, 3-D audio enabled the acquisition of visual targets in about two seconds average response time at 17 degrees accuracy. During the in-flight experiments, pilots correctly identified ground targets 50, 75, and 100 percent of the time at separation angles of 12, 20, and 35 degrees, respectively. In general, pilot performance in the field with the 3-D audio display generator was as expected, based on data from laboratory experiments.

Ericson, Mark↗

NASA NTRS1989

SSME Propellant Path Leak Detection

The complicated high-pressure cycle of the space shuttle main engine (SSME) propellant path provides many opportunities for external propellant path leaks while the engine is running. This mode of engine failure may be detected and analyzed with sufficient speed to save critical engine test hardware from destruction. The leaks indicate hardware failures which will damage or destroy an engine if undetected; therefore, detection of both cryogenic and hot gas leaks is the objective of this investigation. The primary objective of this phase of the investigation is the experimental validation of techniques for detecting and analyzing propellant path external leaks which have a high probability of occurring on the SSME. The selection of candidate detection methods requires a good analytic model for leak plumes which would develop from external leaks and an understanding of radiation transfer through the leak plume. One advanced propellant path leak detection technique is obtained by using state-of-the-art technology infrared (IR) thermal imaging systems combined with computer, digital image processing, and expert systems for the engine protection. The feasibility of IR leak plume detection is evaluated on subscale simulated laboratory plumes to determine sensitivity, signal to noise, and general suitability for the application.

Roger Crawford↗

NASA NTRS2004

A Correction for the IRI Topside Electron Density Model Based on Alouette/ISIS Topside Sounder Data

The topside segment of the International Reference Ionosphere (IRI) electron density model (and also of the Bent model) is based on the limited amount of topside data available at the time (40,OOO Alouette 1 profiles). Being established from such a small database it is therefore not surprising that the models have well-known shortcomings, for example, at high solar activities. Meanwhile a large data base of close to 200,000 topside profiles from Alouette 1,2, and ISIS I, 2 has become available online. A program of automated scaling and inversion of a large volume of digitized ionograms adds continuously to this data pool. We have used the currently available ISIs/Alouette topside profiles to evaluate the IRI topside model and to investigate ways of improving the model. The IRI model performs generally well at middle latitudes and shows discrepancies at low and high latitudes and these discrepancies are largest during high solar activity. In the upper topside IRI consistently overestimates the measurements. Based on averages of the data-model ratios we have established correction factors for the IRI model. These factors vary with altitude, modified dip latitude, and local time.

Bilitza, D.↗

NASA NTRS2013

RFI-SIM: RFI Simulation Package

RFI-SIM simulates the RFI environment to estimate the interference from terrestrial emitters into spacecraft, or vice versa. A high-fidelity simulation of the RFI environment has been developed by employing all antenna- related and radar system-related parameters of multiple emitters, as well as that of the desired spacecraft. In the simulation, the real-time analysis of the interference and its effects on error budgets of a desired radar system is taken into account. This provides a reliable tool for radar system design to deal with RFI issues and to evaluate the sensitivity of various parts of a radar system including antenna pattern, RF front-end and digital processing to RFI signals.

Ghaemi, Hirad↗

NASA NTRS2018

The SUMup Dataset: Compiled Measurements of Surface Mass Balance Components over Ice Sheets and Sea Ice with Analysis over Greenland

Increasing atmospheric temperatures over ice cover affect surface processes, including melt, snowfall, and snow density. Here, we present the Surface Mass Balance and Snow on Sea Ice Working Group (SUMup) dataset, a standardized dataset of Arctic and Antarctic observations of surface mass balance components. The July 2018 SUMup dataset consists of three subdatasets, snow/firn density (https://doi.org/10.18739/A2JH3D23R), at least near-annually resolved snow accumulation on land ice (https://doi.org/10.18739/A2DR2P790), and snow depth on sea ice (https://doi.org/10.18739/A2WS8HK6X), to monitor change and improve estimates of surface mass balance. The measurements in this dataset were compiled from field notes, papers, technical reports, and digital files. SUMup is a compiled, community-based dataset that can be and has been used to evaluate modeling efforts and remote sensing retrievals. Active submission of new or past measurements is encouraged. Analysis of the dataset shows that Greenland Ice Sheet density measurements in the top 1m do not show a strong relationship with annual temperature. At Summit Station, Greenland, accumulation and surface density measurements vary seasonally with lower values during summer months. The SUMup dataset is a dynamic, living dataset that will be updated and expanded for community use as new measurements are taken and new processes are discovered and quantified.

Montgomery, Lynn↗

NASA NTRSDate not supplied

TPSAS-NF1676L-23246-DND

The Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) was conducted from Fairbanks, Alaska during the September transition in the Beaufort-Chukchi Seas. Fifteen missions were flown with a NASA C-130 to characterize clouds, sea-ice, and associated radiative properties over a wide range of conditions. The advanced instrumentation payload included broadband and spectral radiometers, in-situ cloud probes, a laser altimeter and digital camera system. The flight profiles were tightly coordinated with multiple intersecting satellite overpasses allowing for a thorough evaluation of the Clouds and the Earth's Radiant Energy System (CERES) satellite climate data products. Thus, a rich dataset was acquired to help better understand cloud radiative effects as sea-ice conditions are changing due to arctic warming. The mission also acquired measurements to supplement the ongoing Operation Icebridge campaign. An overview of the mission operations, preliminary results, and a description of the datasets now available to the scientific community, will be presented.

William L Smith, Jr↗

NASA NTRS1991

Computer aiding for low-altitude helicopter flight

A computer-aiding concept for low-altitude helicopter flight was developed and evaluated in a real-time piloted simulation. The concept included an optimal control trajectory-generated algorithm based on dynamic programming, and a head-up display (HUD) presentation of a pathway-in-the-sky, a phantom aircraft, and flight-path vector/predictor symbol. The trajectory-generation algorithm uses knowledge of the global mission requirements, a digital terrain map, aircraft performance capabilities, and advanced navigation information to determine a trajectory between mission waypoints that minimizes threat exposure by seeking valleys. The pilot evaluation was conducted at NASA Ames Research Center's Sim Lab facility in both the fixed-base Interchangeable Cab (ICAB) simulator and the moving-base Vertical Motion Simulator (VMS) by pilots representing NASA, the U.S. Army, and the U.S. Air Force. The pilots manually tracked the trajectory generated by the algorithm utilizing the HUD symbology. They were able to satisfactorily perform the tracking tasks while maintaining a high degree of awareness of the outside world.

Swenson, Harry N.↗

NASA NTRS1991

Computer aiding for low-altitude helicopter flight

A computer-aiding concept for low-altitude helicopter flight was developed and evaluated in a real-time piloted simulation. The concept included an optimal control trajectory-generated algorithm based on dynamic programming, and a head-up display (HUD) presentation of a pathway-in-the-sky, a phantom aircraft, and flight-path vector/predictor symbol. The trajectory-generation algorithm uses knowledge of the global mission requirements, a digital terrain map, aircraft performance capabilities, and advanced navigation information to determine a trajectory between mission waypoints that minimizes threat exposure by seeking valleys. The pilot evaluation was conducted at NASA Ames Research Center's Sim Lab facility in both the fixed-base Interchangeable Cab (ICAB) simulator and the moving-base Vertical Motion Simulator (VMS) by pilots representing NASA, the U.S. Army, and the U.S. Air Force. The pilots manually tracked the trajectory generated by the algorithm utilizing the HUD symbology. They were able to satisfactorily perform the tracking tasks while maintaining a high degree of awareness of the outside world.

Swenson, Harry N.↗

NASA NTRS1992

NASA. Lewis Research Center Advanced Modulation and Coding Project: Introduction and overview

The Advanced Modulation and Coding Project at LeRC is sponsored by the Office of Space Science and Applications, Communications Division, Code EC, at NASA Headquarters and conducted by the Digital Systems Technology Branch of the Space Electronics Division. Advanced Modulation and Coding is one of three focused technology development projects within the branch's overall Processing and Switching Program. The program consists of industry contracts for developing proof-of-concept (POC) and demonstration model hardware, university grants for analyzing advanced techniques, and in-house integration and testing of performance verification and systems evaluation. The Advanced Modulation and Coding Project is broken into five elements: (1) bandwidth- and power-efficient modems; (2) high-speed codecs; (3) digital modems; (4) multichannel demodulators; and (5) very high-data-rate modems. At least one contract and one grant were awarded for each element.

Budinger, James M.↗

NASA NTRSDate not supplied

Standalone Hazard Evaluation and Refinement From Instrument Findings (S.H.E.R.I.F.)

The Standalone Hazard Evaluation From Instrument Findings (SHERIF) system is a set of novel algorithms and associated framework designed to support the generation of Digital Elevation Maps (DEMs) from multiple LiDAR scans and perform Hazard Detection (HD) and Safe Site Identification (SSI) with no dependencies on other onboard systems. SHERIF can employ several techniques to perform robust 3D keypoint extraction and Point Cloud registration (PCR) on disparate LiDAR scans of a planetary surface to generate a DEM which evolves over the course of a trajectory. The framework also supports a variety of Hazard Detection and Safe Site Identification algorithms which can be applied to the evolving DEM being produced. SHERIF features a robust and modular construction, allowing the user a high degree of flexibility in selecting and implementing whichever keypoint identificaiton, PCR and HD/SSI algorithms they may prefer, while maintaining the data products and sensor independence of the core SHERIF framework. SHERIF was recently evaluated via simulation and hardware-in-the-loop experimental testing at NASA Johnson Space Center.

hazard detection↗

NASA NTRSDate not supplied

Standalone Hazard Evaluation and Refinement From Instrument Findings (S.H.E.R.I.F.)

The Standalone Hazard Evaluation From Instrument Findings (SHERIF) system is a set of novel algorithms and associated framework designed to support the generation of Digital Elevation Maps (DEMs) from multiple LiDAR scans and perform Hazard Detection (HD) and Safe Site Identification (SSI) with no dependencies on other onboard systems. SHERIF can employ several techniques to perform robust 3D keypoint extraction and Point Cloud registration (PCR) on disparate LiDAR scans of a planetary surface to generate a DEM which evolves over the course of a trajectory. The framework also supports a variety of Hazard Detection and Safe Site Identification algorithms which can be applied to the evolving DEM being produced. SHERIF features a robust and modular construction, allowing the user a high degree of flexibility in selecting and implementing whichever keypoint identificaiton, PCR and HD/SSI algorithms they may prefer, while maintaining the data products and sensor independence of the core SHERIF framework. SHERIF was recently evaluated via simulation and hardware-in-the-loop experimental testing at NASA Johnson Space Center.

hazard detection↗

NASA NTRS1973

Evaluation of usefulness of Skylab EREP S-190 and S-192 imagery in multistage forest surveys

The author has identified the following significant results. A unique digital timber volume estimation system with digital data for two ERTS-1 MSS bands was tested. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment in which possible combinations of the two bands (MSS 5 and 7) were tried, showed than an estimated gain in precision of 50% can be obtained in a multistage sampling design. Especially the difference between the two bands proved to be of major importance for the estimation of biomass in the form of timber volume. Identical tests as the one performed will be conducted with various S-192 bands when the digital data become available.

Langley, P. G.↗