Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DUNE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

On the nature and visibility of crater-associated streaks on Mars

The paper considers Mariner 9 and Viking data that contradict Kuzmin's (1975) hypothesis that all crater-associated wind streaks on Mars are depositional and consist of unresolved barchan-like dunes. According to Kuzmin's hypothesis, any streak can appear either bright or dark relative to its surroundings depending on the sun's position. The spacecraft images, however, show examples of dark and light streaks visible at the same azimuth angle of the sun. Evidence that bright and dark streaks differ both in morphology and in character is considered. It is suggested that the common ragged dark streaks are probably erosion scars while most bright streaks probably represent accumulations of bright dust-storm fallout.

Veverka, J.↗

A composition and thickness model for lunar impact crater and basin deposits

A model was developed for determining the composition and thicknesses of continuous deposits of large lunar impact craters and basins. Results of a photogeologic study and topographic analysis of continuous deposits of the lunar crater Delisle, which support the model, show that numerous secondary craters and crater chains with concentric dunes on their uprange rims occur well within the mapped deposits. At any given radius from Delisle, the secondary craters are of equal freshness and not vastly different in size, but with increasing radius they become better defined. The upper surface of the continuous deposits reaches the level of the pre-existing mare surface well within the mapped boundary of the deposits.

Morrison, R. H.↗

A numerical model of the Martian polar cap winds

An investigation of the Martian polar cap winds and their response to a variety of factors is carried out by numerical experiments based on a zonally symmetric primitive equation model. The seasonal thermal forcing, mass exchange between polar caps and atmosphere, large-scale topography, and polar cap size are discussed, noting that topography has a small effect, but the circulation intensity increases with cap size. The model results show that surface winds near the edge of a retreating polar cap are enhanced, and that the surficial wind indicators near the south pole are formed during spring and those near the north pole during winter. It is suggested that the high-latitude dune fields in the northern hemisphere are formed when the terrain is covered by frost, and that the saltating particles are 'snowflakes' which formed by the mechanism proposed by Pollack (1976). The model results for the winter simulation compare favorably with general circulation model (GCM) calculations.

Haberle, R. M.↗

Seasonal and secular variation of wind streaks on Mars - An analysis of Mariner 9 and Viking data

Viking orbiter observations extending over 1 Martian year have been used in conjunction with Mariner 9 data obtained in 1971-1972 to study the seasonal and secular behavior of several kinds of wind streaks. Most bright streaks, inferred to consist of dust storm fallout in the lees of obstacles, have changed very little in form or orientation over a period of 3 Martian years. Some are extremely stable and have experienced no effective eolian action over the 3 years. A few bright streaks changed rapidly during global dust storms; these streaks are located in areas subject to both global and topographic winds. Viking images have shown for the first time that dark, erosional streaks are stable from the time of their formation after major dust storms until the onset of the next episode of major storm activity. Available evidence shows that the large, dark streaks in Oxia Palus consist of material deflated from dune fields within the associated craters. These streaks lengthened secularly since 1972; changes appear to occur episodically during southern summer. The great majority of all streaks reflect winds during the period from late southern spring to early southern fall, although some changes occur throughout the year. The global pattern of wind streaks and the variability of the streaks thus depend strongly upon the current south-north asymmetry of seasons on Mars.

Thomas, P.↗

Venusian saltation

Numerical solutions are given for particle trajectory equations of motion for the surface of Venus. Particles in saltation obtain maximum heights of two or less centimeters, and have path lengths of less than a meter regardless of particle diameter. The saltation process and particle trajectories are found insensitive to surface pressure changes over the range of 70 to 100 bars, and temperature changes over the range of 600 to 900 K. Due to dense atmosphere, the net rate of surface material transport due to saltation is small for particles in diameters from 0.01 to 7 mm, as compared to earth which has 10 times more, and Mars which has 250 times more. Path length scales are also found to be very small, suggesting the presence of dunes on Venus; however, there is still a possibility that small ripples do exist, which cannot be detected by high-resolution radar images.

White, B. R.↗

Stratigraphic relationships within Martian polar cap deposits

It is found that layered ice and dust deposits accumulate on the smooth and banded terrains of the north and south polar cap deposits of Mars, while erosion exposes these layers on the equator-facing slopes of layered terrain. The stripping of layers occurs in areas of strong and multidirectional wind, forming striped terrain. Also noted is the production of steep scarps with crescentic planform by local wind scour, in frequent association with dune fields positioned immediately downwind. Unconformities, which are common within layered deposits in areas of complex topography at the north pole, indicate that deposition episodes of 5-10 layers alternate with the slight erosion of pole-facing trough walls. It is suggested that poles may migrate poleward, replacing the relief increase by depositional infilling when they near the poles.

Howard, A. D.↗

An investigation into the utilization of HCMM thermal data for the descrimination of volcanic and Eolian geological units

Analysis of HCMM data shows that the resolution provided by the thermal data is inadequate to permit the identification of individual lava flows within the volcanic test sites. Thermal data of southern California reveals that dune complexes at Kelso and Algodomes are found to be too small to permit adequate investigation of their structure. As part of the study of the San Francisco volcanic field, marked variations in the thermal properties of the region between Flagstaff and the Utah State border were observed. Several well-defined units within the Grand Canyon and the Colorado Plateau were recognized and appear to be very suitable for analysis with HCMM, SEASAT and LANDSAT images. Although individual volcanic constructs within the Cascade Range are too small to permit detailed characterization with the thermal data, the regional volcano/tectonic setting offers a good opportunity for comparing the possible thermal distinction between this area and sedimentary fold belts such as those found in the eastern United States. Strong intra-regional variations in vegetation cover were also tentatively identified for the Oregon test site.

Head, J. W., III↗

Shuttle imaging radar experiment

The Shuttle imaging radar (SIR-A) acquired images of a variety of the earth's geologic areas covering about 10 million square kilometers. Structural and geomorphic features such as faults, folds, outcrops, and dunes are clearly visible in both tropical and arid regions. The combination of SIR-A and Seasat images provides additional information about the surface physical properties: topography and roughness. Ocean features were also observed, including large internal waves in the Andaman Sea.

Elachi, C.↗

Mineral identification from orbit - Initial results from the Shuttle multispectral infrared radiometer

The Shuttle multispectral IR radiometer (SMIRR) was designed to obtain surface reflectance data in ten spectral bands in order to evaluate the usefulness of a future imaging system for remote mineral identification. Attention was given to the 2.0-2.4 micron region, which has a wealth of spectral absorption features and appeared to have potential for the identification of CO3- and OH-bearing minerals such as the kaolinite and montmorillonite clays. SMIRR radiances were normalized by using a spectrum for dune sand collected in the Kharga Depression in Egypt. Direct identifications have been made of kaolinite-containing and carbonate material, indicating an exceptional potential for future orbital platform narrowband spectral imaging systems for mineralogical mapping.

Goetz, A. F. H.↗

Resolution versus speckle relative to geologic interpretability of spaceborne radar images - A survey of user preference

A survey conducted to evaluate user preference for resolution versus speckle relative to the geologic interpretability of spaceborne radar images is discussed. Thirteen different resolution/looks combinations are simulated from Seasat synthetic-aperture radar data of each of three test sites. The SAR images were distributed with questionnaires for analysis to 85 earth scientists. The relative discriminability of geologic targets at each test site for each simulation of resolution and speckle on the images is determined on the basis of a survey of the evaluations. A large majority of the analysts respond that for most targets a two-look image at the highest simulated resolution is best. For a constant data rate, a higher resolution is more important for target discrimination than a higher number of looks. It is noted that sand dunes require more looks than other geologic targets. At all resolutions, multiple-look images are preferred over the corresponding single-look image. In general, the number of multiple looks that is optimal for discriminating geologic targets is inversely related to the simulated resolution.

Ford, J. P.↗

Relict drainages, conical hills, and the eolian veneer in southwest Egypt - Applications to Mars

The fluvial and mass wasting origin of the particles in the eolian deposits, the segregation of these materials on the basis of grain size, and the migration of those particles capable of saltation to areas of accumulation in lowland basins of the Sahara are suggested as analogs for the formation and accumulation of 'sand' sheets and dunes on the northern plains and in the polar erg on Mars. Outliers of the Martian plateau in the fretted terrain are seen as having been dissected, at least initially, by channels whose upstream portions are incised in the uplands. The Martian 'wadis' possess many geomorphic peculiarities similar to those of the Gilf (Gilf Kebir Plateau, southwest Egypt) wadis, and like the Egyptian features they have been attributed to mass wasting. Even though basal sapping and removal of debris by wind have almost certainly modified the Martian features, their deep incision in the plateau and their inferred northward extensions in the northern plains are thought to require not only initial downcutting by fairly energetic streams but also prolonged and long-distance flow of water.

Breed, C. S.↗

Venus: The nature of the surface from Venera panoramas

Images of the surface of Venus obtained by the Soviet Venera 9, 10, 13 and 14 landers are analyzed to provide a basis for understanding the nature of geologic processes operating there. Bedrock is exposed at the Venera 10, 13 and 14 sites and is characterized by semi-continuous, flat polygonal to subrounded patches up to several meters in width. The bedrock surface is often dominated by sub horizontal to horizontal layered plates with thicknesses of several cm and abundant linear and polygonal vertical fractures. Soils (particles 1 cm) are abundant at the Venera 9, 10 and 13 sites, but are uncommon at Venera 14. Features indicative of a strong aeolian influence (moats, dunes, wind tails) are not observed. Several hypotheses are considered for the origin of the bedrock surfaces, and it is concluded that bedrock originated from surface lava flows. The relative freshness of features observed by the Veneras suggests that erosion rates are very low or that some bedrock surfaces are geologically young.

Garvin, J. B.↗

Planetary geomorphology field studies: Iceland and Antarctica

Field studies of terrestrial landforms and the processes that shape them provide new directions to the study of planetary features. These studies, conducted in Iceland and in Antarctica, investigated physical and chemical weathering mechanisms and rates, eolitan processes, mudflow phenomena, drainage development, and catastrophic fluvial and volcanic phenomena. Continuing investigations in Iceland fall in three main catagories: (1) catastrophic floods of the Jokulsa a Fjollum, (2) lahars associated with explosive volcanic eruptions of Askja caldera, and (3) rates of eolian abrasion in cold, volcanic deserts. The ice-free valleys of Antarctica, in particular those in South Victoria Land, have much is common with the surface of Mars. In addition to providing independent support for the application of the Iceland findings to consideration of the martian erosional system, the Antarctic observations also provide analogies to other martian phenomena. For example, a family of sand dunes in Victoria Valley are stabilized by the incorporation of snow as beds.

Malin, M. C.↗

Rapid extraction of relative topography from Viking orbiter images. 2: Application to irregular topographic features

The ratio and flat field photoclinometric methods for determining crater form topography are described. Both methods compensate for the effects of atmospheric scattering by subtracting a haze value from all brightness values. Algorithms were altered to derive relative topographic data for irregular features such as ejecta blankets, lava flows, graben and ridge scarps, dune forms, and stratified materials. After the elevations along the profiles are obtained by integration of the photometric function, a matrix transformation is applied to the image coordinates of each pixel within each profile, utilizing each pixel's integral height, to produce a projection of each profile line onto the surface. Pixel brightness values are then resampled along the projected track of each profile to determine a more correct height value for each pixel. Precision of the methods is discussed.

Davis, P. A.↗

Participation in the Mars data analysis program: Global and regional studies of wind-indicators on the surface of Mars

Global and regional patterns on Mars were inferred from surface aeolian features, such as wind streaks and dune deposits, which were visible in Viking Orbiter images. Precise measurements of the dimensions of topographic obstacles, i.e., craters, hills, ridges, on Mars as well as their associated wind streaks were used to determine the aerodynamic shape of an obstacle affects near surface airflow. A classification of Martian wind streaks was developed on the basis of albedo contrast and the presence or absence of either topographic obstacles or sediment deposits at the point of origin of the wind streaks. It was concluded that local meteorological conditions, such as the stability of the atmospheric boundary layer, play a major role in determining why some Martian craters produce depositional wind streaks while others produce erosional ones.

Veverka, J.↗

Geologic mapping using thermal images

Thermal radiance data from the Heat Capacity Mapping Mission (HCMM) satellite has been used to measure surface reflectance data and to provide additional material composition information through remote sensing. The primary goal was to investigate the utility of HCMM data for geologic applications. Three techniques were used for displaying and combining thermal and visible near infrared (VNIR) data for two desert areas in southern California (Trona and Pisgah): color additive composites (CAC) for day and night IR and day VNIR, principal components, and calculation of thermal inertia images. The HCMM thermal data were more effective than Landsat data in producing separation of compositionally different areas including volcanic and intrusive rocks. The satellite CAC data produced an image for a 1 x 2 degree area, and the color picture was enlarged to a scale of 1:250,000. Playa composition, moisture content, presence of standing water, and vegetation cover were displayed in a variety of colors according to physical characteristics. Areas such as sand dunes were not distinguishable because of the coarse 500-mm HCMM resolution. HCMM thermal data have shown a new dimension to geologic remote sensing, and future satellite missions should allow the continued development of the thermal infrared data for geology.

Abrams, M. J.↗

Utilization of LANDSAT orbital imagery in the soil survey processes at Rio Grande do Norte state

Pedologic photointerpretative criteria adapted to LANDSAT orbital imagery were used: drainage (pattern, integration degree, density and uniformity degree); relief (pattern, dissection degree and crest lines); photographic texture, photographic tonnality, and the land use (type, glebas size and intensity of use). The performance of the imagery as an auxiliar tool in the soil survey processes, at Rio Grande do Norte State was evaluated. The drainage and relief elements were easily extracted from the imagery and also ones that provided the greatest deductive possibility about pedologic boundaries. Other analyzed criteria were considered only auxiliaries, corroborating some soil limits in the evidences convergence phase. The principal pedologic dominions of the 30,000 sq km are covered by the same LANDSAT image (WRS 359/16) were delimited with good precision: (1) fluvial plains, beaches, dunes and coastal mangroves; (2) North Coast line Plateau; (3) Acu Sandstone Zone; (4) residual plateaus of the Tertiary; and (6) plains of the embasement.

Formaggio, A. R.↗

Application of SIR-B data for groundwater exploration in the Arabian shield and sand-drift monitoring in the AN Nafud and Al Jafurah fringe areas, Kingdom of Saudi Arabia

The primary objectives of the investigation are to determine fully the utility of Shuttle Imaging Radar-B (SIR-B) images for providing valuable surface indicators for ground-water prospecting in the Arabian shield and to identify and assess defining characteristics of sand sheets, sand streaks, and sand dunes in the fringe areas of An Nafud and Al Jafurah. Specific objectives include the determination of the incremental contribution of incidence angle to the total information that can be extracted from SIR-B standard and digitally-enhanced images in the AL Jafurah fringe area; the determination of the incremental contribution of digitally-registered multisensor images; and the development of a groundwater exploration plan for the Ha'il test area in the Arabian Shield.

Berlin, G. L.↗