SEARCH · Engineering Papers

Results for “Curved Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Controlling surface adatom kinetics for improved structural and optical properties of high indium content aluminum indium nitride

A non-traditional, for AlInN, method of controlling adatom kinetics and a low temperature growth condition were employed to improve the quality of high indium content aluminum indium nitride films. Metal-rich surfaces were used to enhance adatom mobility and compensate for the low growth temperature (Tsub ≤ 400 °C) effect of reducing surface diffusion lengths. The metal-rich approach resulted in 12 times lower x-ray diffraction full-width at half-maximum rocking curve figures of merit when compared to literature. In addition to promising photoluminescence emission, these results indicate improved structural quality over other reported approaches. AlInN films with ∼70% indium content were characterized via x-ray diffraction, atomic force microscopy, and photoluminescence spectroscopy with each technique indicating an optimal growth temperature of 350 °C. Al0.3In0.7N grown above 400 °C exhibited phase separation and a reduction in quality, while samples grown colder were predominantly single-phase and displayed improved photoluminescence at ∼1.45 eV. The photoluminescence spectra suggest emission from quantum wire-like structures with dimensions ranging from 15 to 18 nm. These low-temperature, metal-rich findings for high indium content AlInN are promising for future long-wavelength III-nitride optical devices.

Engel, Zachary (ORCID:0000000205021981)↗

DOE OSTI2018

Nonequilibrium phases and segregation for skyrmions on periodic pinning arrays

Using particle-based simulations, we examine the collective dynamics of skyrmions interacting with periodic pinning arrays, focusing on the impact of the Magnus force on the sliding phases. As a function of increasing pinning strength, we find a series of distinct dynamical phases, including an interstitial flow phase, a moving disordered state, a moving crystal, and a segregated cluster state. The transitions between these states produce signatures in the skyrmion lattice structure, the skyrmion Hall angle, the velocity fluctuation distributions, and the velocity-force curves. The moving clustered state is similar to the segregated state recently observed in continuum-based simulations with strong quenched disorder. The segregation arises from the drive dependence of the skyrmion Hall angle, and appears in the strong pinning limit when the skyrmions have nonuniform velocities, causing different portions of the sample to have different effective skyrmion Hall angles. As a result, we map the evolution of the dynamic phases as a function of the system density, the ratio of the Magnus force to the dissipative term, and the ratio of the number of skyrmions to the number of pinning sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Surface Kinematics and the Canonical Yang-Mills All-Loop Integrand

It has been a long-standing challenge to define a canonical loop integrand for nonsupersymmetric gluon scattering amplitudes in the planar limit. Naive integrands are inflicted with 1 / 0 ambiguities associated with tadpoles and massless external bubbles, which destroy integrand-level gauge invariance as well as consistent on-shell factorization on single loop cuts. In this Letter, we show that this essentially kinematical obstruction to defining “the” integrand for Yang-Mills theory has a structural solution, handed to us by the formulation of gluon amplitudes in terms of curves on surfaces. This defines “surface kinematics” generalizing momenta, making it possible to define the integrand satisfying both a (surface generalized) notion of gauge-invariance and consistent loop cuts. The integrand also vanishes at infinity in appropriate directions, allowing it to be recursively computed for nonsupersymmetric Yang-Mills theory in any number of dimensions. We illustrate these ideas through one loop for all multiplicity, and for the simplest two-loop integrand. Published by the American Physical Society 2025

Arkani-Hamed, Nima↗

DOE OSTI2017

Methods for the chemical synthesis of carbon nanotubes: an approach based on hemispherical polyarene templates

Abstract Hemispherical polyarenes represent attractive templates from which carbon nanotubes of the same diameter and rim structure (chirality) might be grown by repetitive annulation reactions. The resulting single-index ( n,m ) nanotubes would have one end open and the other end capped by the original template. Efforts in the author’s laboratory to synthesize (5,5) and (6,6) nanotube end-caps are described. Nitroethylene is shown to serve well as a “masked acetylene” for the conversion of polyarene bay regions into new unsubstituted benzene rings by a Diels-Alder cycloaddition/aromatization process. Benzyne reacts similarly, both in solution and in the gas phase. These annulation reactions are proposed as methods for elongating large-diameter templates that have bay regions on their rims into structurally uniform, single-walled carbon nanotubes. Unfortunately, the bay regions on the strongly curved rim of the small-diameter (5,5) nanotube end-cap 3 resist Diels-Alder cycloadditions with both nitroethylene and benzyne. Pentabenzocorannulene ( 14 ) is proposed as a promising candidate for surface-catalyzed cyclodehydrogenation to a surface-bound hemispherical polyarene that could serve as a template for synthesis of pure (5,5) carbon nanotubes.

Chemistry↗

DOE OSTI2016

Transient events in archival very large array observations of the galactic center

The Galactic center has some of the highest stellar densities in the Galaxy and a range of interstellar scattering properties, which may aid in the detection of new radio-selected transient events. Here, we describe a search for radio transients in the Galactic center, using over 200 hr of archival data from the Very Large Array at 5 and 8.4 GHz. Every observation of Sgr A* from 1985 to 2005 has been searched using an automated processing and detection pipeline sensitive to transients with timescales between 30 s and 5 minutes with a typical detection threshold of ∼100 mJy. Eight possible candidates pass tests to filter false-positives from radio-frequency interference, calibration errors, and imaging artifacts. Two events are identified as promising candidates based on the smoothness of their light curves. Despite the high quality of their light curves, these detections remain suspect due to evidence of incomplete subtraction of the complex structure in the Galactic center, and apparent contingency of one detection on reduction routines. Events of this intensity (∼100 mJy) and duration (∼100 s) are not obviously associated with known astrophysical sources, and no counterparts are found in data at other wavelengths. We consider potential sources, including Galactic center pulsars, dwarf stars, sources like GCRT J1745−3009, and bursts from X-ray binaries. None can fully explain the observed transients, suggesting either a new astrophysical source or a subtle imaging artifact. More sensitive multiwavelength studies are necessary to characterize these events, which, if real, occur with a rate of 14{sub −12}{sup +32} hr{sup −1} deg{sup −2} in the Galactic center.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2018

Tensor networks, p -adic fields, and algebraic curves: arithmetic and the AdS 3 /CFT 2 correspondence

One of the many remarkable properties of conformal field theory in two dimensions is its connection to algebraic geometry. Since every compact Riemann surface is a projective algebraic curve, many constructions of interest in physics (which a priori depend on the analytic structure of the spacetime) can be formulated in purely algebraic language. This opens the door to interesting generalizations, obtained by taking another choice of field: for instance, the p-adics. Herein, we generalize the $\mathrm{AdS} / \mathrm{CFT}$ correspondence according to this principle; the result is a formulation of holography in which the bulk geometry is discrete—the Bruhat–Tits tree for $\mathrm{PGL} (2, \mathbb{Q}_p)$—but the group of bulk isometries nonetheless agrees with that of boundary conformal transformations and is not broken by discretization. We anticipate that this forms the natural geometric setting for tensor networks that have been proposed as models of bulk reconstruction via quantum error correcting codes; in certain cases, geodesics in the Bruhat–Tits tree reproduce those constructed using quantum error correction. Other aspects of holography also hold: Standard holographic results for massive free scalar fields in a fixed background carry over to the tree, whose vertical direction can be interpreted as a renormalization-group scale for modes in the boundary $\mathrm{CFT}$. Higher-genus bulk geometries (the $\mathrm{BTZ}$ black hole and its generalizations) can be understood straightforwardly in our setting, and the Ryu–Takayanagi formula for the entanglement entropy appears naturally

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1978

Limb-darkening and the structure of the Jovian atmosphere

By observing the transit of various cloud features across the Jovian disk, limb-darkening curves were constructed for three regions in the 4.6 to 5.1 mu cm band. Several models currently employed in describing the radiative or dynamical properties of planetary atmospheres are here examined to understand their implications for limb-darkening. The statistical problem of fitting these models to the observed data is reviewed and methods for applying multiple regression analysis are discussed. Analysis of variance techniques are introduced to test the viability of a given physical process as a cause of the observed limb-darkening.

Newman, W. I.↗

NASA NTRS1984

A simple application of the Bailey-Orowan creep model to Fe-39.8 at. pct Al and gamma/gamma prime - alpha

The results of a study to determine the recovery rates and work-hardening coefficients for creep from constant cross-head speed compressive tests are presented. Stressing and straining rates are computed from measured time-load curves obtained from compression testing between 1200 and 1400 K of several B2 crystal structure Fe-39.8 Al intermetallic materials and the directionally solidified eutectic alloy gamma/gamma prime alpha. These quantities are then fitted to the universal form of the Bailey-Orowan equation for creep. The recovery rates were found to be functions of nominal strain rate, stress, and temperature, while the hardening coefficients were dependent only on temperature. While the work-hardening coefficient for gamma/gamma prime - alpha was about 0.05 of the elastic modulus, the work-hardening coefficients for Fe-39.8 at. pct Al were less than 0.002 of the modulus.

Whittenberger, J. D.↗

NASA NTRS1987

X-ray spectra and atmospheric structures of bursting neutron stars

Atmospheric structures and emitted X-ray spectra of bursting neutron stars are investigated. Theoretical curves are fitted to observational ones on the color temperature vs. luminosity diagram and two relations among mass, radius, and distance of the bursters are obtained. The fit of the theoretical curve to observations is statistically acceptable. Two possible sets of mass, radius, and distance to the X-ray bursts source MXB 1636-536 are derived, taking into account absorption lines at 4.1 keV, theoretical mass-radius relations of neutron star models, and the distance to the Galactic center. If the absorption line is due to Cr XX III, then M = 1.7-2.0 solar masses, R = 11-12 km, and d = 6.3-6.7 kpc, and if it is due to Fe XXV, then M = 1.8-2.1 solar masses, R = 8-10 km, and d = 5.8-6,4 kpc. The distance to the Galactic center is almost the same as that to MXB 1636-536.

Ebisuzaki, Toshikazu↗

NASA NTRS1987

Corrosion of a-Si cells and modules

The authors report on corrosion/erosion phonemena observed in exposing a-Si cells, modules, and specially designed test structures to natural and accelerated test environments. Relevant cell and module I-V curve data used for monitoring degradation are presented. The causes of the observed degradation, methods of mitigation, and consequences for fielded modules are discussed.

Mon, G. R.↗

NASA NTRS1992

Estimation of crack closure stresses for in situ toughened silicon nitride with 8 wt pct scandia

An 8-wt pct-scandia silicon nitride with an elongated grain structure was fabricated. The material exhibited high fracture toughness and a rising R-curve as measured by the indentation strength technique. The 'toughening' exponent m was found to be m about 0.1. The high fracture toughness and R-curve behavior was attributed mainly to bridging of the crack faces by the elongated grains. The crack closure (bridging) stress distribution in the wake region of the crack tip was estimated as a function of crack size from the R-curve data, with an arbitrarily assumed distribution function.

Choi, Sung R.↗

NASA NTRS1990

An improved method to determine vibration damping of materials and structural components

The present, improved frequency-domain technique for vibration-damping estimation involves the fitting of a 'best curve' for the measured frequency-response data near a resonance by means of a least-squares error criterion. The damping ratio and the undamped natural frequency are then computed using the coefficients of the rational fraction polynomial that had been determined on the basis of the curve-fitting technique. Attention is given to the results of this method's application to damping measurements for graphite-reinforced epoxy composites. The results obtained are superior to those of the 'half-power points' method.

Rao, Mohan D.↗

NASA NTRS1992

Hybrid analytical technique for the nonlinear analysis of curved beams

The application of a two-step hybrid technique to the geometrically nonlinear analysis of curved beams is used to demonstrate the potential of hybrid analytical techniques in nonlinear structural mechanics. The hybrid technique is based on successive use of the perturbation method and a classical direct variational procedure. The functions associated with the various-order terms in the perturbation expansion of the fundamental unknowns, and their sensitivity derivatives with respect to material and geometric parameters of the beam, are first obtained by using the perturbation method. These functions are selected as coordinate functions (or modes) and the classical direct variational technique is then used to compute their amplitudes. The potential of the proposed hybrid technique for nonlinear analysis of structures is discussed. The effectiveness of the hybrid technique is demonstrated by means of numerical examples. The symbolic computation system Mathematica is used in the present study. The tasks performed on Mathematica include: (1) generation of algebraic expressions for the perturbation functions of the different response quantities and their sensitivity derivatives: and (2) determination of the radius of convergence of the perturbation series.

Noor, A. K.↗

NASA NTRS2001

Vibroacoustic Model Validation for a Curved Honeycomb Composite Panel

Finite element and boundary element models are developed to investigate the vibroacoustic response of a curved honeycomb composite sidewall panel. Results from vibroacoustic tests conducted in the NASA Langley Structural Acoustic Loads and Transmission facility are used to validate the numerical predictions. The sidewall panel is constructed from a flexible honeycomb core sandwiched between carbon fiber reinforced composite laminate face sheets. This type of construction is being used in the development of an all-composite aircraft fuselage. In contrast to conventional rib-stiffened aircraft fuselage structures, the composite panel has nominally uniform thickness resulting in a uniform distribution of mass and stiffness. Due to differences in the mass and stiffness distribution, the noise transmission mechanisms for the composite panel are expected to be substantially different from those of a conventional rib-stiffened structure. The development of accurate vibroacoustic models will aide in the understanding of the dominant noise transmission mechanisms and enable optimization studies to be performed that will determine the most beneficial noise control treatments. Finite element and boundary element models of the sidewall panel are described. Vibroacoustic response predictions are presented for forced vibration input and the results are compared with experimental data.

Buehrle, Ralph D.↗

NASA NTRS2001

Clouds on Neptune: Motions, Evolution, and Structure

The aims of our original proposal were these: (1) improving measurements of Neptune's circulation, (2) understanding the spatial distribution of cloud features, (3) discovery of new cloud features and understanding their evolutionary process, (4) understanding the vertical structure of zonal cloud patterns, (5) defining the structure of discrete cloud features, and (6) defining the near IR albedo and light curve of Triton. Towards these aims we proposed analysis of existing 1996 groundbased NSFCAM/IRTF observations and nearly simultaneous WFPC2 observations from the Hubble Space Telescope. We also proposed to acquire new observations from both HST and the IRTF.

Sromovsky, Larry A.↗

NASA NTRS2004

A Revised Approach to the ULDB Design

The National Aeronautics and Space Administration Balloon Program has experienced problems in the scaling up of the proposed Ultra Long Duration Balloon. Full deployment of the balloon envelope has been the issue for the larger balloons. There are a number of factors that contribute to this phenomenon. Analytical treatments of the deployment issue are currently underway. It has also been acknowledged that the current fabrication approach using foreshortening is costly, labor intensive, and requires significant handling during production thereby increasing the chances of inducing damage to the envelope. Raven Industries has proposed a new design and fabrication approach that should increase the probability of balloon deployment, does not require foreshortening, will reduce the handling, production labor, and reduce the final balloon cost. This paper will present a description of the logic and approach used to develop this innovation. This development consists of a serial set of steps with decision points that build upon the results of the previous steps. The first steps include limited material development and testing. This will be followed by load testing of bi-axial reinforced cylinders to determine the effect of eliminating the foreshortening. This series of tests have the goal of measuring the strain in the material as it is bi-axially loaded in a condition that closely replicated the application in the full-scale balloon. Constant lobe radius pumpkin shaped test structures will be designed and analyzed. This matrix of model tests, in conjunction with the deployment analyses, will help develop a curve that should clearly present the deployment relationship for this kind of design. This will allow the "design space" for this type of balloon to be initially determined. The materials used, analyses, and ground testing results of both cylinders and small pumpkin structures will be presented. Following ground testing, a series of test flights, staged in increments of increasing suspended load and balloon volume, will be conducted. The first small scale test flight has been proposed for early Spring 2004. Results of this test flight of this new design and approach will presented. Two additional domestic test flights from Ft. Sumner, New Mexico, and Palestine, Texas, and one circumglobal test flight from Australia are planned as part of this development. Future plans for both ground testing and test flights will also be presented.

Smith, Michael↗

NASA NTRS1994

An initiation-promotion model of tumour prevalence from high-charge and energy radiations

A repair/misrepair kinetic model for multiple radiation-induced lesions (mutation inactivation) is coupled to a two-mutation model of initiation-promotion in tissue to provide a parametric description of tumour prevalence in the mouse Harderian gland from high-energy and charge radiations. Track-structure effects are considered using an action-cross section model. Dose-response curves are described for gamma rays and relativistic ions, and good agreement with experiment is found. The effects of nuclear fragmentation are also considered for high-energy proton and alpha-particle exposures. The model described provides a parametric description of age-dependent cancer induction for a wide range of radiation fields. Radiosensitivity parameters found in the model for an initiation mutation (sigma 0 = 7.6 x 10(-10) cm2 and D0 = 148.0 Gy) are somewhat different than previously observed for neoplastic transformation of C3H10T1/2 cell cultures (sigma 0 = 0.7 x 10(-10) cm2 and D0 = 117.0 Gy). We consider the two hypotheses that radiation acts solely as an initiator or as both initiator and promoter and make model calculations for fractionation exposures from gamma rays and relativistic Fe ions. For fractionated Fe exposures, an inverse-dose-rate effect is provided by a promotion hypothesis with an increase of 30% or more, dependent on the dose level and fractionation schedule, using a mutation rate for promotion similar to that of single-gene mutations.

NASA Discipline Radiation Health↗

NASA NTRS1996

Single residue substitutions that change the gating properties of a mechanosensitive channel in Escherichia coli

MscL is a channel that opens a large pore in the Escherichia coli cytoplasmic membrane in response to mechanical stress. Previously, we highly enriched the MscL protein by using patch clamp as a functional assay and cloned the corresponding gene. The predicted protein contains a largely hydrophobic core spanning two-thirds of the molecule and a more hydrophilic carboxyl terminal tail. Because MscL had no homology to characterized proteins, it was impossible to predict functional regions of the protein by simple inspection. Here, by mutagenesis, we have searched for functionally important regions of this molecule. We show that a short deletion from the amino terminus (3 amino acids), and a larger deletion of 27 amino acids from the carboxyl terminus of this protein, had little if any effect in channel properties. We have thus narrowed the search of the core mechanosensitive mechanism to 106 residues of this 136-amino acid protein. In contrast, single residue substitutions of a lysine in the putative first transmembrane domain or a glutamine in the periplasmic loop caused pronounced shifts in the mechano-sensitivity curves and/or large changes in the kinetics of channel gating, suggesting that the conformational structure in these regions is critical for normal mechanosensitive channel gating.

Non-NASA Center↗