Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Characterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

LYNM PE1 Pre-Experiment A Site Characterization Report

Underground chemical explosive experiments such as LYNM PE1 generate large multiphenomenological datasets, require complex site preparation and build out, and utilize cutting edge models and analysis techniques to analyze and simulate the explosion-induced signals. This wide range of outcomes makes it a necessity to thoroughly characterize the testbed in advance of experiments in a way that complements the wide suite of data being generated. Here, we present a broad overview of the site characterization work and data collection that was conducted before Experiment A, which is the first in a series of three PE1 experiments. This work includes, but is not limited to, geologic mapping, physical sample collection, analysis of material properties, geophysical borehole logging, and in-situ measurements. This information was collected by a large, dedicated team and was used to inform site construction, finalize instrumentation placement, generate Geologic Framework Models, feed pre-experiment predictions, and facilitate post-experiment data analysis

58 GEOSCIENCES↗
DOE OSTI2024

Simple self-consistent method for excited states in density functional theory to characterize defect-derived behavior in wide-band-gap-based microelectronic materials

This final report summarizes the results of the Laboratory Direct Research and Development (LDRD) Project Number 229740. Wide band gap semiconductors such as gallium nitride (GaN) have features highly desirable for multiple mission electronic applications. Realization of their potential requires atomic-scale understanding of electronic behavior. The principal experimental tools for electronically probing defects in GaN are chemically undifferentiating and lack a practical theoretical counterpart needed to identify and characterize specific defects. This project investigated whether a simple idea for modeling defect excited states and their associated photoluminescence (PL) energies is viable, as a path to accelerate the understanding of defect behavior and gain valuable insights into engineering new electronic materials and devices. The research implemented a non-self-consistent total-energy evaluation of a Koopmans-type estimation of an excited electronic state energy in density functional theory (DFT) calculations, and proceeded to design, implement, and assess a self-consistent method for computing excited states based upon an OCcupation-Constrained-DFT (occ-DFT). The occ-DFT was verified in test calculations of defect excited states and validated against well-characterized PL data for 3d transition metal defects in GaN. The method proved stable and robust in computing excited states and gave accurate predictions compared to experimental PL data. The combined ground state/excited-state capability proved capable of chemically differentiating defect species in GaN. In application to 3d dopants in GaN, we reinterpreted extensive experimental literature, proposed new defects as prospective candidates for use in quantum information applications, and outlined design strategies to create and exploit these potentially useful functional defects in GaN.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Complete the first phase of the comprehensive characterization of repair welding performed on irradiated Ni alloy 182

This report describes the research activities on post-weld evaluation and characterization of the quality and properties of welds made on the first phase of repair welding campaign on irradiated Ni alloy 182. The equipment and capabilities of the campaign were developed jointly by the U.S. Department of Energy, Office of Nuclear Energy, Light Water Reactor Sustainability Program, the Electric Power Research Institute, Long Term Operations Program (and the Welding and Repair Technology Center), and Oak Ridge National Laboratory. Irradiated nickel alloy 182 with doped boron ranging from 5 wppm to 15 wppm, were laser welded in the hot cell. The weld samples were cross-sectioned and characterized. The significant, on-going effort to weld irradiated alloys with high helium concentrations and comprehensively analyze the results will eventually yield validated repair techniques and guidelines for use by the nuclear industry in extending the operational lifetimes of nuclear power plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Characterizing Radium Distributions, Source Attribution and Impacts from Marcellus Produced Water

This presentation characterizes spatial trends in radium (Ra) concentrations, sources, and potential impacts generated from Marcellus Shale produced waters. Here, we combine previously published produced water data with additional Ra activity measurements extracted from residual waste reports submitted to the Pennsylvania Department of Environmental Protection from 2012-2023. This is the largest, spatially referenced compilation of Ra activity measurements from produced water sourced from the Marcellus Shale to date. The median Marcellus Shale produced water Ra activity presented here is 6,906 pCi/L (interquartile range = 12,515 pCi/L). Radium activities in the positively skewed dataset can exceed 30,000 pCi/L in some parts of the state. The regional trends in Ra concentrations and isotopic ratios will be characterized and potential environmental and health implications discussed.

Mackey, Justin↗
DOE OSTI2024

NETL Non-Destructive Core Characterization

This product describes the Characterization efforts since 2017; the current methods used, publication, deep dives into method applications, and future direction of the Core Characterization work.

Paronish, Thomas J.↗
DOE OSTI2022

Characterizing Bioavailable Soil Nutrients Across Coastal Systems: Western Lake Erie and Chesapeake Bay

Terrestrial Aquatic Interfaces (TAIs), defined as where land meets water, exhibit important hydrological, biological, and biogeochemical dynamics and play a critical role in the Earth’s carbon cycle. Current Earth System Models improperly represent this role due to the complexity of these systems and the disproportionally large impact TAIs have relative to their area. To improve our predictive capacity of coastal system dynamics, a better understanding of carbon and nutrient cycling across TAI’s is needed. Coastal Observations, Mechanisms, and Predictions Across Systems and Scales (COMPASS) aims to achieve this through field observations and laboratory incubations throughout the Western Lake Erie and Chesapeake Bay regions. Here, we report on preliminary results from a soil characterization experiment across the WLE and CB regions. This experiment was conducted as part of the 2-year field, measurements, and experiments (FME) pilot study portion of COMPASS to provide initial baseline data for the sites and to characterize the spatial variability of our analytes. Soil samples were collected from three locations along the TAI transect (upland forest, transitional forest, and wetland) and analyzed for bioavailable nutrients using three types of extractions: (a) water extractions, (b) 2M KCl extractions, and (c) 1M NH4Cl extractions to analyze (a) water soluble organic carbon (WSOC), (b) ammonium and nitrate, and (c) base cations, including Ca, Mg, Na, K, and Fe. These analyses, in conjunction with other bulk physicochemical analyses, will help establish baseline understanding of these sites to drive future research and design focused experiments that will ultimately improve our predictive understanding of these freshwater and marine coastal TAIs and their response to short and long-term changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Synchrotron-based Characterization Techniques for Radiation Detection Materials and Devices: An Overview

High-performance room-temperature radiation detectors (high energy resolution for spectrometers, high spatial resolution for imaging devices, and low defect-density for high flux applications) are needed for photon energies (>20 keV) that are not well suited for silicon detectors. Applications for such radiation detectors include nonproliferation, synchrotron, medical, astrophysics, and homeland security. Material- and device- characterization to understand and solve the limiting factors of radiation detection materials and devices is a core element of a radiation detector development R&D program. This presentation will give an overview on the two main synchrotron-based characterization techniques that have been employed by the authors in the last ~20 years: (1) White Beam X-ray Diffraction Topography and (2) Micron-scale detector mapping. A perfect (one domain) crystal (radiation detection material) is a requirement to achieve a highperformance radiation detector. White Beam X-ray Diffraction Topography (WBXDT) allows the rapid screening of the crystallinity of the detector material. With WBXDT we can quickly screen CZT and other crystals to make sure they have only one domain, and to see the presence of extended defects and strain fields.

Camarda, Giuseppe S.↗
DOE OSTI2024

Modular Subsurface Sensors and Integrated Software for Advanced Subsurface Characterization and Monitoring using Unoccupied Vehicles

The advent and subsequent proliferation of autonomous airborne, waterborne, and groundbased vehicles (i.e., “drones”) promises to broadly transform the geosciences and associated industries, including fossil energy exploration and development, mineral resource exploration and development, water-resource management, and environmental remediation. For geophysical characterization and monitoring, the prospect of programming highly repeatable and low-cost drone missions for subsurface imaging will allow for deployments in hazardous and previously inaccessible areas. Coupled with autonomous workflows for data processing, management, and visualization, drone-based geophysical characterization and monitoring will enable unprecedented, real-time insight into diverse subsurface properties and processes of scientific and engineering importance. Toward this end, the objectives of this Lab Directed Research and Development (LDRD) project were to develop new (1) instrumentation for dronebased electromagnetic induction (EMI) geophysical imaging, including separated transmitter and receivers and associated electronics, (2) software for real-time data telemetry, processing, management, and visualization. Although EMI has been previously deployed using unoccupied aerial systems (UASs), these applications failed to capitalize on the game-changing capabilities of drone platforms. Whereas drone-based data acquisition allows for collection of rich, three-dimensional (3D) multi-offset/multi-angle configurations between transmitters and receivers, past efforts have relied on conventional instrumentation that was designed for ground-based data collection with the transmitter and a single receiver housed in the same unit; nor did these previous applications demonstrate real-time delivery of results to support rapid management decisions in the field. In this 1-year project, we (1) designed and constructed new lightweight independent transmitter and receiver antenna platforms that communicate with a laptop computer; (2) developed software to control data acquisition, manage/transfer data, and visualize data as its collected; and (3) demonstrated the operation of the new hardware and software systems in a ground-based field test. Our work entails major technological advances for EMI and established a foundation on which to build a new drone-based, real-time geophysical EMI imaging capability to support diverse challenges facing the nation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Complementary Subsurface Characterization Methods to Develop a Geologic Model for the EGS Collab Experiment, Sanford Underground Research Facility

The EGS (Enhanced Geothermal Systems) Collab project was performed within the Sanford Underground Research Facility (SURF) with a goal of understanding processes and evaluation of models related to hydraulic simulation of rock at depth. The present work deals with the development of Testbed 2 where experiments were conducted at a depth of 1.25 km and were located within a well-characterized testbed in a metamorphic, amphibolite host rock. A total of eleven boreholes varying in length between 10.6 m and 81.2 m were continuously cored to develop the testbed. In addition to the continuous coring of the amphibolite host rock, geophysical instrumentation supporing electrical resisivity tomography (ERT), microearthquake (MEQ) detection, and optical fiber providing distributed temperature sensing (DTS) and distributed acoustic sensing (DAS) were installed in the monitoring boreholes, all of which produced a comprehensive complementary suite of characterization and monitoring technologies.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Characterization Inform Sustainable Recovery of Critical Minerals from Fossil Energy Waste Feedstocks

Rare earth elements (REE) and other critical minerals (CM, e.g., Co, Ni, Li) have important uses in green energy and modern technologies, yet are vulnerable to potential supply chain disruptions. One potential domestic CM source is fossil energy wastes, such as acid mine drainage (AMD) and treatment solids (AMD solids), coal combustion ash, and Oil and Gas (O&G) drilling wastes (drill cuttings and produced waters). While they can contain lower CM concentrations then traditional ore, the quantity and fast availability as waste feedstock makes them a promising CM resource. To explore their promise, researchers at DOE’s National Energy Technology Laboratory (NETL) have collected and analyzed CM data for aforementioned fossil energy wastes, and utilized advanced geochemical characterization (e.g., synchrotron microprobe and sequential extraction) to identify the CM speciation and binding environments, and developed sustainable and targeted CM recovery. Successful examples include: (1) the discovery of easily mobile REE phases in Ca-rich coal combustion ash and developing a patented REE recovery process from Ca-rich Powder River Basin coal ash; (2) the successful identification of REE/Co/Ni/Zn hosting phases in acid mine drainage treatment solids (AMD solids) with diverse chemical composition (Al, Mn, or Fe-rich) informing the sequential recovery of different REE/CMs from AMD solids; (3) the recovery potential of Li and other CMs in O&G produced waters and drill cuttings. The innovations driven by characterization have the potential to offset the cost of waste management and wastewater treatments while reducing the cost and environmental footprint of CM extraction.

Stuckman, Mengling↗
DOE OSTI2025

Characterizing falling particle curtain receivers at commercially relevant scales: Research Performance Progress Report (RPPR-1)

Sandia will construct a cold flow receiver test platform in order to characterize falling particle curtain receivers at commercially relevant scales. While Sandia has extensive experience in R&D of falling particle curtain receivers, most have been at pilot scale and smaller - on the order of 1 MW th with characteristic dimensions of nominally 1-2 m to adequately collect solar energy from the heliostat field at the National Solar Thermal Test Facility (NSTTF). However, scaling up receivers to commercially relevant scales (25 MW th and above) will require a thorough understanding of particle curtain dynamics at larger scales, especially longer drop heights, for design certainty. The goal of this project will be to construct a cold falling particle curtain test rig capable of simulating particle characteristics that are expected in a commercial scale CSP plant, namely the drop height, curtain thickness, and particle mass flow rate (normalized by length of curtain). This will enable data collection on curtain opacity and spread, both of which are correlated to receiver efficiency and reliable construction, for commercially relevant scales. It will also permit validation of numerical models that will enable detailed receiver characterization and design past currently validated scales.

14 SOLAR ENERGY↗
DOE OSTI2024

H3D Characterization Memo

The H3D was characterized using GADRAS 19.3.5 using data sent by the IAEA. Everything related to the measurement setup was provided by the IAEA. The sources measured were detailed and the distance from the detector was also provided. The data sheets of the sources were used to determine the source activity at the time of calibration, as needed for characterization.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Met-Ocean Characterization for the Atlantic Marine Energy Center’s (AMEC’s) Gulf of Maine Wave Test Sites

Comprehensive and consistent analysis, characterization, and classification of the wave climate at open-ocean wave energy converter (WEC) test sites guided by international standards enables commensurable evaluation and comparison of met-ocean characteristics, including wave energy resources and wave load conditions. Herein, we present results from a comprehensive feasibility-level met-ocean characterization for two Atlantic Marine Energy Center (AMEC) WEC test sites in the Gulf of Maine.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Interparticle Characterization of Mechanical Biomass Particle-Particle and Particle-Wall Interactions

The biomass materials industry faces significant challenges in managing material variability and its impact on storage and handling systems. Physical properties such as moisture content, particle size, and density fluctuate considerably, leading to operational issues like bridging and ratholing that disrupt material flow. These variations create a complex cascade effect throughout the process chain, affecting transportation, storage, and conversion processes. The economic consequences of this variability manifest in increased operational costs, maintenance requirements, and system downtime. Environmental factors further complicate the situation, as weather conditions and seasonal availability influence material properties and system performance. Engineers employ specialized equipment design, material characterization protocols, and pre-processing steps like size reduction and homogenization to address these challenges. A critical knowledge gap exists between continuous-level constitutive models and particle-scale behavior. This project developed a novel device to quantify interparticle mechanics between biomass particles, measuring friction and adhesion forces between particles and wall materials. The research focused on corn stover and southern pine forest residue, creating a comprehensive database of particle interactions. This breakthrough enables direct application in particle-based computational modeling, advancing the field's understanding of biomass handling characteristics and supporting the development of more reliable and efficient storage and handling systems. The project's outcomes contribute significantly to understanding biomass's mechanical and flow characteristics, particularly how variability at the particle level affects larger-scale handling operations. This knowledge is crucial for engineering feedstock supply systems that consistently meet quality and cost specifications for various conversion processes. The innovative experimental setup developed through this research represents a significant advancement in biomass characterization methodology. Providing precise measurements of particle-level interactions establishes a foundation for more accurate predictive modeling of bulk material behavior. This enhanced understanding of fundamental particle mechanics enables engineers to anticipate better and address handling challenges before they manifest in full-scale operations. This research opens new avenues for optimizing biomass handling systems through data-driven design approaches. The comprehensive database of particle interactions serves as a valuable resource for future research and development efforts, potentially leading to more efficient and cost-effective biomass processing solutions. This advancement in particle-level mechanics could revolutionize how biomass handling systems are designed and operated, contributing to more sustainable and reliable renewable energy production.

09 BIOMASS FUELS↗
DOE OSTI2025

Fracture Network Quantification for Enhanced Reservoir Characterization in CO2 Storage Sites

Presentation slides on “Fracture Network Quantification for Enhanced Reservoir Characterization in CO2 Storage Sites” for the CCUS 2025 conference held in Houston, Texas March 3-5, 2025. Accurate reservoir characterization is fundamental for the safe and efficient operation of carbon capture, utilization, and storage (CCUS) projects. This process is not only critical during initial site selection but also plays a key role in continuously updating reservoir geomodels throughout injection operations to effectively manage subsurface storage sites. Our primary objective is to develop a comprehensive understanding of fracture networks within CO2 injection reservoirs, which are critical for predicting the behavior of injected fluids, ensuring storage integrity post-injection, and mitigating risks such as leakage or induced seismicity.

artifical intelligence / machine learning (AI/ML)↗
DOE OSTI2025

Enhanced Feedstock Characterization and Modeling to Facilitate Optimal Preprocessing and Deconstruction of Corn Stover (Final Report)

This project addresses the challenge of processing corn stover by fractionating this biomass feedstock to both streamline processing and generate new potential co-products. Additionally, the project developed new field-deployable analytical tools that can be coupled with empirical models that were used to predict feedstock properties and processing performance. The overall scope of this project was: (1) identify conditions for optimal corn stover fractionation using a two- stage physical fractionation, (2) assess how physical fractionation impacts properties, partitioning of biomass, and response to processing, (3) further adapt, develop, and validate several advanced characterization tools for assessing biomass properties that can be linked to processing behavior, and (4) develop and validate predictive models based on measurements that can be performed “in the field” or “at the biorefinery gate” to predict feedstock processing behavior (preprocessing and deconstruction). The first objective employed pre-separation processing (size reduction) which was next subjected to enhanced separations to yield fractions enriched or depleted in select compositional components or properties. For the second objective, fractions were screened for their response to post-separation processing (pretreatment and enzymatic hydrolysis). Detailed characterization profiles were developed and dynamic image analysis to assess distribution of particle size and morphology. For the final objective, we utilized these tools to develop empirical models to assess the relative abundance of tissue type in order to assess fractionation efficacy and to predict fraction performance during pretreatment and enzymatic hydrolysis.

09 BIOMASS FUELS↗
DOE OSTI2025

Characterizing Microwave Losses in Superconducting Coaxial Cables for Quantum Systems

As superconducting quantum systems scale up to enable applications like large-scale quantum computing, challenges such as fabrication yield, wiring complexity, and microwave crosstalk drive the need for high-fidelity, low-loss, modular interconnects. In recent experiments, the performance of these interconnects is often limited by cable loss, a factor that becomes even more critical as we aim for higher fidelity operations and connect increasingly coherent modules. In this talk, we present a detailed characterization of microwave losses in commercially available superconducting cables and discuss how material characterization techniques can be useful for understanding their microscopic origin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Characterization of the Multi-Coincident Bismuth Germanate Oxide Spectrometer at the Nuclear Counting Facility

A multi-detector γ-ray spectroscopy system including 3 high-purity germanium (HPGe) detectors has been developed at the Nuclear Counting Facility at Lawrence Livermore National Laboratory. This system operates not only in conventional singles γ-ray detection mode but also incorporates features like coincidence and anti-coincidence techniques. These advanced detection modes can significantly enhance the system’s sensitivity, making it a powerful tool for isotope identification and quantification, especially for complex samples with high background and overlapping peaks. In this re port, we present a comprehensive performance characterization of the Multi-Coincident Bismuth Oxide Spectrometer (MCBOS) using a variety of sample types, including 60 Co, 48 Sc, and mixed fission product samples. Each sample provides unique tests for the MCBOS capabilities. Additionally, a GEANT4 model of the MCBOS has been generated to aid with the characterization of the system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗