Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermal Stability and Outgassing Behaviors of High‐nickel Cathodes in Lithium‐ion Batteries

Abstract LiNiO 2 ‐based high‐nickel layered oxide cathodes are regarded as promising cathode materials for high‐energy‐density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high‐Ni cathodes, which are critical factors in determining their overall safety performance. A comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high‐Ni cathodes.

Cui, Zehao↗
DOE OSTI2023

Speciation of Transition Metal Dissolution in Electrolyte from Common Cathode Materials

Abstract Significant capacity loss has been observed across extended cycling of lithium‐ion batteries cycled to high potential. One of the sources of capacity fade is transition metal dissolution from the cathode active material, ion migration through the electrolyte, and deposition on the solid‐electrolyte interphase on the anode. While much research has been conducted on the oxidation state of the transition metal in the cathode active material or deposited on the anode, there have been limited investigations of the oxidation state of the transition metal ions dissolved in the electrolyte. In this work, X‐ray absorption spectroscopy has been performed on electrolytes extracted from cells built with four different cathode active materials (LiMn 2 O 4 (LMO), LiNi 0.5 Mn 1.5 O 4 (LNMO), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and (x Li 2 MnO 3 *(1‐x) LiNi a Mn b Co c O 2 , with a+b+ c =1) (LMRNMC)) that were cycled at either high or standard potentials to determine the oxidation state of Mn and Ni in solution. Inductively coupled plasma‐mass spectrometry has been performed on the anodes from these cells to determine the concentration of deposited transition metal ions. While transition metal ions were found dissolved in all electrolytes, the oxidation state(s) of Mn and Ni were determined to be dependent on the cathode material and independent of cycling potential.

Rynearson, Leah↗
DOE OSTI2023

Annealing in Argon Universally Upgrades the Na‐Storage Performance of Mn‐Based Layered Oxide Cathodes by Creating Bulk Oxygen Vacancies

Abstract Manganese‐rich layered oxide cathodes of sodium‐ion batteries (SIBs) are extremely promising for large‐scale energy storage owing to their high capacities and cost effectiveness, while the Jahn–Teller (J–T) distortion and low operating potential of Mn redox largely hinder their practical applications. Herein, we reveal that annealing in argon rather than conventional air is a universal strategy to comprehensively upgrade the Na‐storage performance of Mn‐based oxide cathodes. Bulk oxygen vacancies are introduced via this method, leading to reduced Mn valence, lowered Mn 3 d‐ orbital energy level, and formation of the new‐concept Mn domains. As a result, the energy density of the model P2‐Na 0.75 Mg 0.25 Mn 0.75 O 2 cathode increases by ≈50 % benefiting from the improved specific capacity and operating potential of Mn redox. The Mn domains can disrupt the cooperative J–T distortion, greatly promoting the cycling stability. This exciting finding opens a new avenue towards high‐performance Mn‐based oxide cathodes for SIBs.

Chemistry↗
DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Effect of aqueous‐based cathode slurry pH and immersion time on corrosion of aluminum current collector in lithium‐ion batteries

Corrosion of aluminum can occur during the manufacturing of lithium‐ion batteries when using aqueous‐based cathode slurries. In exposure tests, the alkaline pH value of aqueous‐based cathode slurries and immersing time were revealed as the principle factors that control the corrosion of aluminum during the cathode manufacturing process. The nickel manganese cobalt oxide active material used in the slurry does not have a direct impact on corrosion of the aluminum current collector. The initiation and evolution of localized corrosion on aluminum are closely related to the formation of galvanic cells between aluminum matrix and intermetallic particles. X‐ray photoelectron spectroscopy results confirmed that the pH of cathode slurry was the only factor that alters aluminum surface composition, during which the oxide passive film was gradually degraded into hydroxide. Electrochemical characterizations showed that aluminum electrodes gave remarkably different response to the different pH of test solutions. The time‐pH‐variant electrochemical response was ascribed to the change of passive film and electric double layer properties.

Li, S. Y.↗
DOE OSTI2018

Insight into Ca-Substitution Effects on O3-Type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Cathode Materials for Sodium-Ion Batteries Application

O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NaNFM) is well investigated as a promising cathode material for sodium-ion batteries (SIBs), but the cycling stability of NaNFM still needs to be improved by using novel electrolytes or optimizing their structure with the substitution of different elements sites. To enlarge the alkali-layer distance inside the layer structure of NaNFM may benefit Na + diffusion. Herein, the effect of Ca-substitution is reported in Na sites on the structural and electrochemical properties of Na 1-x Ca x/2 NFM (x=0, 0.05, 0.1). X-ray diffraction (XRD) patterns of the prepared Na 1-x Ca x/2 NFM samples show single alpha-NaFeO 2 type phase with slightly increased alkali-layer distance as Ca content increases. The cycling stabilities of Ca-substituted samples are remarkably improved. The Na 0.9 Ca 0.05 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (Na 0.9 Ca 0.05 NFM) cathode delivers a capacity of 116.3 mAh g -1 with capacity retention of 92% after 200 cycles at 1C rate. In operando XRD indicates a reversible structural evolution through an O3-P3-P3-O3 sequence of Na 0.9 Ca 0.05 NFM cathode during cycling. Compared to NaNMF, the Na 0.9 Ca 0.05 NFM cathode shows a wider voltage range in pure P3 phase state during the charge/discharge process and exhibits better structure recoverability after cycling. The superior cycling stability of Na 0.9 Ca 0.05 NFM makes it a promising material for practical applications in sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2018

Atomic layer deposition of Pt@CsH 2 PO 4 for the cathodes of solid acid fuel cells

Atomic layer deposition (ALD) has been used to apply continuous Pt films on powders of the solid acid CsH 2 PO 4 (CDP), in turn, used in the preparation of cathodes in solid acid fuel cells (SAFCs). The film deposition was carried out at 150 °C using trimethyl(methylcyclopentadienyl)platinum (MeCpPtMe 3 ) as the Pt source and ozone as the reactant for ligand removal. Chemical analysis showed a Pt growth rate of 0.09 ± 0.01 wt%/cycle subsequent to an initial nucleation delay of 84 ± 20 cycles. Electron microscopy revealed the contiguous nature of the films prepared using 200 or more cycles. The cathode overpotential (0.48 ± 0.02 V at a current density of 200 mA/cm 2 ) was independent of Pt deposition amount beyond the minimum required to achieve these continuous films. The cell electrochemical characteristics were moreover extremely stable with time, with the cathode overpotentials increasing by no more than 10 mV over a 100 h period of measurement. So, ALD holds promise as an effective tool in the preparation of SAFC cathodes with high activity and excellent stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Dry-pressed lithium nickel cobalt manganese oxide (NCM) cathodes enabled by holey graphene host

There is an increasing demand for electric vehicle batteries with higher energy densities that can be manufactured with low cost utilizing environmentally friendly processes. Lithium nickel cobalt manganese oxides (NCM), such as LiNi(0.5)Co(0.2)Mr(0.3)O(2) (NCM523), are commonly used in commercial lithium ion batteries for electric vehicle applications. These cathodes are typically fabricated using environmentally hazardous, energy intensive, and time-consuming solvent-based slurry casting processes. Polymeric binders, also required for cathode preparation, add weight and can undergo parasitic reactions during battery cycling. Here we report a facile, solvent-free, binder-free, and rapid cold-press electrode fabrication process to prepare high mass loading NCM cathodes within minutes. This process is enabled by the use of holey graphene, a unique lightweight, compressible carbon nanomaterial that serves as both a binder and an electrically conductive matrix. NCM cathodes fabricated by this method are stable and exhibit good active material utilization. A significant advantage for the dry-press process is that the electrode mass loadings can be readily increased simply by adding more composite powder to the compression molding die, resulting in improved areal capacities that are attractive for applications requiring high energy per unit footprint. (C) 2020 Elsevier Ltd. All rights reserved.

25 ENERGY STORAGE↗
DOE OSTI2022

Artificial cathode electrolyte interphase for improving high voltage cycling stability of thick electrode with Co-free 5 V spinel oxides

Spinel-type cathode LiNi 0.5 Mn 1.5 O 4 (LNMO) has intrigued the transportation industry due to its high operating voltage and total elimination of the expensive cobalt element. However, LNMO cathode with high mass loading (> 3 mAh/cm 2 in areal capacity) has suffered from excessive capacity degradation upon long cycling. Here, a robust Al 2 O 3 surface layer is introduced to the thick LNMO electrode via atomic layer deposition (ALD). The capacity retention in full cells with the graphite anode is improved from 46.3% to 75.3% after 300 cycles with cutoff voltage up to 4.85 V, while enabling average Coulombic efficiency of 99.9% during the cycling. The post-mortem analyses reveal that the Al 2 O 3 surface layer would convert to Al-O-F /Al-F species upon cycling, offering stable interphase to protect the cathode material. Furthermore, these results demonstrate the significance of surface modification enabling high voltage cathode for next-generation LIBs.

25 ENERGY STORAGE↗
DOE OSTI2019

Beneficial rheological properties of lithium-ion battery cathode slurries from elevated mixing and coating temperatures

It is crucial that lithium-ion battery manufacturers implement strategies to expedite production without sacrificing quality due to rising consumer demand. Cathode coating is commonly performed at the industrial scale with a slot-die coater. In slot-die coating, substrate velocity is maximized and imperfections (such as air entrainment and thickness variations) are minimized by reducing the viscosity of the material being coated. A simple, scalable technique of reducing the viscosity of the cathode slurry is to increase its temperature, though it is dire that this heat does not cause irreversible gelation or otherwise deteriorate the slurry constituents. Cathode slurries were prepared at different mixing temperatures between 25 °C and 75 °C and their flow behavior was studied at their mixing temperature. At practical shear rates, the slurry coated at 60 °C was 23% less viscous than that coated at 25 °C, meaning the critical coating speed could be increased by roughly 14% at 60 °C. Between 25 °C and 60 °C, the slurries’ yield stress and equilibrium storage modulus increased monotonically, providing the additional benefit of higher sedimentation resistance of the active materials. To examine the influence of temperature on coating morphology and electrochemical performance, slurries were prepared and coated at 25 °C and 60 °C. Micrographs revealed no superficial differences between coatings. The electrode coated at 60 °C demonstrated comparable capacity retention during long-term cycling and high-rate discharge testing when compared to the electrode coated at 25 °C. The findings of this study indicate that warmer mixing and coating operations serve to maximize cathode productivity, particularly if advancements can be made in industrial-scale electrode drying.

25 ENERGY STORAGE↗
DOE OSTI2026

Hydrogen production from full-strength corn stover fermentation effluent in single-chamber replaceable-cathode microbial electrolysis cells

Lignocellulosic residual biomass generated by the agricultural sector is an abundant feedstock for biohydrogen production via dark fermentation. However, this process is intrinsically inefficient, converting only ~30% of the reductant energy into H2 and leaving substantial amounts of reduced byproducts. These byproducts, mostly found in the fermentation effluents, can be further valorized in microbial electrolysis cells (MECs) to enhance the overall H2 recovery. However, current MEC configurations are typically dual- or single-chamber systems, yet both suffer from key inefficiencies. Dual-chamber systems rely on proton exchange membranes that are costly and prone to rapid biofouling, whereas single-chamber, membraneless systems are limited by reduced productivity due to H2 recycling and methanogenic consumption In this study, three single-chamber, 50-mL replaceable-cathode microbial electrolysis cells (RC-MECs) were 3D-printed and equipped with a physical separator to isolate anode and cathode compartments and limit H2 migration. Full-strength milled corn stover (MCS) fermentation effluent (COD of ~23.8 g-COD/L) was treated in fed-batch mode over two operational periods spanning 21 (Run 1) and 80 (Run 2) days. The RC-MECs exhibited comparable performance in both runs: after biofilm maturation, current densities exceeded 100 A/m²_cathode, COD removal reached up to 43%. Notably, extended RC-MECs operation led to a substantial methanogenic activity with the CH4 fraction in the cathode gas increasing to as high as 80% of the total biogas. Additions of a methanogenesis inhibitor 2-bromoethanesulfonate (2-BES) produced transient increases in hydrogen yields (11.51 and 5.12 L-H2/L_reactor/day in Runs 1 and 2, respectively); however, sustained 2-BES addition in subsequent cycles reduced total biogas production, decreased COD removal, and led to volatile fatty acid accumulation. Overall, single-chamber MECs can treat high-strength dark fermentation effluents while improving H2 recovery, but methanogenesis remains a key bottleneck, and complete long-term inhibition may be operationally unsustainable.

Hydrogen Production↗
DOE OSTI2020

A scalable approach of using biomass derived glycerol to synthesize cathode materials for lithium-ion batteries

Glycerol, a main byproduct of biodiesel, was used as the fuel agent in a scalable flame-assisted spray pyrolysis approach to synthesize micron-size cathode materials. Single droplet combustion, particle morphology, and electrochemical performance were examined considering the effects of salt concentration, water addition, and post-annealing time on synthesizing Li(Ni 1/3 Co 1/3 Mn 1/3 )O 2 (NCM111) cathode materials. Single droplet tests showed that a sufficient amount of water in the glycerol-based precursor could delay droplet inflation and ignition. Moreover, using a two-fluid atomization nozzle, spray tests demonstrated that adding water would result in less wrinkled and more uniform particles. Nevertheless, increasing water proportion in the precursor could reduce the reaction heat, resulting in that samples prepared with water addition needed longer post-annealing time to improve their electrochemical performance. Using the precursor without water, the best performed NCM111 cathode material was synthesized with only 2 h of post-annealing. It has a discharge capacity of 163.3 mAh/g at 0.1C and 85.5% capacity retention at 1C after 100 cycles. Furthermore, the current work confirmed the capability of using glycerol as a sustainable fuel agent to synthesize NCM111 cathode materials, and also provided basic conditions for the development of large-scale production in the future.

25 ENERGY STORAGE↗
DOE OSTI2020

Overcharge-to-thermal-runaway behavior and safety assessment of commercial lithium-ion cells with different cathode materials: A comparison study

In this paper, overcharge behaviors and thermal runaway (TR) features of large format lithium-ion (Li-ion) cells with different cathode materials (LiFePO 4 (LFP), Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2 (NCM111), Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 (NCM622) and Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 (NCM811)) were investigated. The results showed that, under the same overcharge condition, the TR of LFP Li-ion cell occurred earlier compared with the NCM Li-ion cells, indicating its poor overcharge tolerance and high TR risk. However, when TR occurred, LFP Li-ion cell exhibited lower maximum temperature and mild TR response. All NCM Li-ion cells caught fire or exploded during TR, while the LFP Li-ion cell only released a large amount of smoke without fire. According to the overcharge behaviors and TR features, a safety assessment score system was proposed to evaluate the safety of the cells. In short, NCM Li-ion cells have better performance in energy density and overcharge tolerance (or low TR risk), while LFP Li-ion cell showed less severe response to overcharging (or less TR hazards). For NCM Li-ion cells, as the ratio of nickel in cathode material increases, the thermal stability of the cathode materials becomes poorer, and the TR hazards increase. Such a comparison study on large format Li-ion cells with different cathode materials can provide deeper insights into the overcharge behaviors and TR features, and provide guidance for engineers to reasonably choose battery materials in automotive applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Atomic-scale tuned interface of nickel-rich cathode for enhanced electrochemical performance in lithium-ion batteries

The Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC6 22 ) is one promising cathode for lithium-ion batteries (LIBs), but suffers from poor cycling stability under high cutoff potentials. The performance degradation was reflected as capacity fading and voltage drop, having their roots in instable interface of NMC622. Aimed at improving interfacial stability, in this study, we deposited nanoscale ZrO 2 coatings conformally over NMC622 cathodes using atomic layer deposition (ALD). We found that, under a high cutoff voltage (4.5 V), the ALD ZrO 2 coatings evidently improved the performance of NMC622 cathode, showing better cyclability and higher sustainable capacity. In addition, the ALD coatings dramatically boosted the rate capability of NMC622. All these compelling performance results are ascribed to the atomic-scale tunable ZrO 2 coatings via ALD, which create stable interface and thereby inhibit unfavorable evolutions. In the study, we utilize a suite of characterization tools and various analyses to clarify the effects of ALD ZrO 2 coatings. This study will be helpful for improving the performance of nickel-rich cathodes via interfacial engineering using ALD.

25 ENERGY STORAGE↗
DOE OSTI2022

Coupling of multiscale imaging analysis and computational modeling for understanding thick cathode degradation mechanisms

Here, using a thick NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ) electrode as an example, we present a macro- to nanoscale 2D and 3D imaging analysis approach coupled with 4D (space + time) computational modeling to probe its degradation mechanism in a lithium-ion battery cell. Particle cracking increases and contact loss between particles and carbon-binder domain are observed to correlate with the cell degradation. This study unravels that the reaction heterogeneity within the thick cathode caused by the unbalanced electron conduction is the main cause of the battery degradation over cycling. The increased heterogeneity in the system will entail more cathode regions where the degree of active material utilization is uneven, leading to higher probabilities of particle cracking. These findings shed light on the crucial role of the electronic and ionic transportation networks in the performance deterioration of the thick cathode. They also provide guidance for cathode architecture optimization and performance improvement.

25 ENERGY STORAGE↗
DOE OSTI2016

Enhanced surface exchange activity and electrode performance of (La 2–2x Sr 2x )(Ni 1–x Mn x )O 4+δ cathode for intermediate temperature solid oxide fuel cells

Surface exchange kinetics of Ruddlesden-Popper (R-P) phase lanthanum nickelates upon Mn doping as an intermediate temperature solid oxide fuel cells (IT-SOFCs) cathode is investigated for the first time in this communication. To promote the exchange rate in oxygen reduction reaction (ORR) on nickelates, Mn is partially substituted for Ni. The oxygen exchange resistance is accurately measured by electrochemical impedance spectroscopy (EIS) with dense thin layer cathode. It is found that Mn substantially promotes the surface kinetics; a surface exchange coefficient (k) of 1.57 × 10 –6 cm/s is obtained at 700 °C for La 1.8 Sr 0.2 Ni 0.9 Mn 0.1 O 4+δ (Sr20Mn10), ~80% higher than that of the undoped La 2 NiO 4+δ (LNO). To our best knowledge, such coefficient is the highest values among the currently available R-P phase IT-SOFC cathodes. The corresponding polarization resistances (R p ) are evaluated on porous electrodes. R p for LNO is 0.74 Ωcm 2 at 750 °C, but decreases significantly to 0.42 Ωcm 2 for Sr20Mn10 which is remarkably improved compared to the reported values in the literature for La 2 MO 4+δ materials (M = transition metal). In conclusion, those promising results demonstrate that Mn-doped LNO is a new excellent cathode material for IT-SOFC.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Lithium-ion batteries (LIBs) have revolutionized portable electronics and electric vehicles (EVs), but the growing accumulation of end-of-life (EOL) batteries poses environmental challenges. Recycling high-value cathodes from EOL LIBs can minimize waste and reduce the need for mining critical minerals. Here, this study focuses on the direct recycling of Ni-rich cathodes, particularly lithium-manganese-cobalt-oxide (NMC) 622 in a “reciprocal ternary molten salts (RTMS)" system. The ionothermal relithiation in the RTMS system successfully restores the layered structure, lithium content, and electrochemical performance of the NMC 622 cathode, comparable to the pristine material. The cost analysis reveals that cathode regeneration through ionothermal relithiation is more economical than virgin production or conventional recycling methods.

25 ENERGY STORAGE↗