Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMBUSTION PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Compendium of Experimental Cetane Numbers

This report is an updated version of the 2004 Compendium of Experimental Cetane Number Data and presents a compilation of measured cetane numbers for pure chemical compounds. It includes all available single compound cetane number data found in the scientific literature up until March 2014 as well as a number of unpublished values, most measured over the past decade at the National Renewable Energy Laboratory. This Compendium contains cetane values for 389 pure compounds, including 189 hydrocarbons and 201 oxygenates. More than 250 individual measurements are new to this version of the Compendium. For many compounds, numerous measurements are included, often collected by different researchers using different methods. Cetane number is a relative ranking of a fuel's autoignition characteristics for use in compression ignition engines; it is based on the amount of time between fuel injection and ignition, also known as ignition delay. The cetane number is typically measured either in a single-cylinder engine or a constant volume combustion chamber. Values in the previous Compendium derived from octane numbers have been removed, and replaced with a brief analysis of the correlation between cetane numbers and octane numbers. The discussion on the accuracy and precision of the most commonly used methods for measuring cetane has been expanded and the data has been annotated extensively to provide additional information that will help the reader judge the relative reliability of individual results.

33 ADVANCED PROPULSION SYSTEMS↗

Modifying the hygroscopic property of La{sub 2}O{sub 3} by Pr, Sm and Nd doping

Combustion synthesized La{sub 2}O{sub 3}, La{sub 2-2x}Pr{sub 2x}O{sub 3} (x = 0.025–0.30), La{sub 2-2x}Nd{sub 2x}O{sub 3} (x = 0.025–0.50), La{sub 2-2x}Sm{sub 2x}O{sub 3} (x = 0.025–0.30) and their subsequently formed hydroxide phases were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The hydroxylation reaction (hygroscopic property) of oxides in an open atmosphere was monitored by X-ray diffraction (XRD). All of these oxides hydroxylate to form stable hydroxides at room temperature upon exposure to open atmosphere for certain interval of time. La{sub 2}O{sub 3} shows rapid hydroxylation reaction as compared to other oxides (La{sub 2-2x}M{sub 2x}O{sub 3}, M = Pr, Nd, Sm). It is observed that La{sub 2-2x}Pr{sub 2x}O{sub 3} shows the slowest hydroxylation reaction compared to La{sub 2-2x}Nd{sub 2x}O{sub 3} and La{sub 2-2x}Sm{sub 2x}O{sub 3}. Further, as the concentration of dopant ion concentration increases in each La{sub 2-2x}Pr{sub 2x}O{sub 3} (x = 0.05, 0.15 and 0.30), La{sub 2-2x}Nd{sub 2x}O{sub 3} (x = 0.05, 0.15, 0.30 and 0.50) and La{sub 2-2x}Sm{sub 2x}O{sub 3} (x = 0.05, 0.15 and 0.30), the hydroxylation reaction becomes slower consecutively. Overall, 30% Pr doped La{sub 2}O{sub 3} (La{sub 1.40}Pr{sub 0.60}O{sub 3}) shows the highest stability (slowest rate of hydroxylation) in open atmosphere at room temperature. - Graphical abstract: Compared to La{sub 2}O{sub 3} (20 h), La{sub 1.40}Nd{sub 0.60}O{sub 3}, La{sub 1.40}Sm{sub 0.60}O{sub 3} and La{sub 1.40}Pr{sub 0.60}O{sub 3} take much more time to convert into hydroxide with conversion times of 100, 150 and 230 h respectively. Display Omitted - Highlights: • La{sub 2}O{sub 3}, La{sub 2-2x}Pr{sub 2x}O{sub 3} (x = 0.025–0.30), La{sub 2-2x}Nd{sub 2x}O{sub 3} (x = 0.025–0.50) and La{sub 2-2x}Sm{sub 2x}O{sub 3} (x = 0.025–0.30) were synthesized by solution combustion method. • All the oxides completely convert into their hydroxide phase in open atmosphere. • The consistent peak shifting in the XRD toward the higher 2θ value is observed due to substitution of larger ions (La{sup 3+}) by smaller ions (Pr{sup 3+}/Pr{sup 4+}, Nd{sup 3+}and Sm{sup 3+}). • Stability of La{sub 2}O{sub 3} increases with increasing the dopant concentration. • La{sub 1.40}Pr{sub 0.60}O{sub 3} shows the highest stability in open atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient Three-Dimensional Analysis of Side Load in Liquid Rocket Engine Nozzles

Three-dimensional numerical investigations on the nozzle start-up side load physics were performed. The objective of this study is to identify the three-dimensional side load physics and to compute the associated aerodynamic side load using an anchored computational methodology. The computational methodology is based on an unstructured-grid, and pressure-based computational fluid dynamics formulation, and a simulated inlet condition based on a system calculation. Finite-rate chemistry was used throughout the study so that combustion effect is always included, and the effect of wall cooling on side load physics is studied. The side load physics captured include the afterburning wave, transition from free- shock to restricted-shock separation, and lip Lambda shock oscillation. With the adiabatic nozzle, free-shock separation reappears after the transition from free-shock separation to restricted-shock separation, and the subsequent flow pattern of the simultaneous free-shock and restricted-shock separations creates a very asymmetric Mach disk flow. With the cooled nozzle, the more symmetric restricted-shock separation persisted throughout the start-up transient after the transition, leading to an overall lower side load than that of the adiabatic nozzle. The tepee structures corresponding to the maximum side load were addressed.

Wang, Ten-See↗

Combustion Science for Cleaner Fuels

Musahid Ahmed discusses how he and his team use the Advanced Light Source (ALS) to study combustion chemistry at our '8 Big Ideas' Science at the Theater event on October 8th, 2014, in Oakland, California.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-Uniform Cylinder-to-Cylinder Combustion for Ammonia Generation in a New Passive SCR System

Lean burn gasoline engine is a promising technology for reducing the fuel consumption by passenger cars. However, cost-effective NOx emissions control for lean burn gasoline engines remains a great challenge for the commercialization of lean burn gasoline engines in the U. S. market. To address this issue, passive selective catalytic reduction (SCR), which utilizes a close-coupled three-way catalyst (TWC) as an on-board device for ammonia (NH3) production during rich engine operation, has attracted much attention in the past several years. The main purpose of this study is to reduce the cost of ammonia generation for a passive SCR system by proposing a new passive SCR system architecture and an innovative non-uniform cylinder-to-cylinder combustion (NUCCC) strategy. The new passive SCR system that consists of a two-stage TWC and a TWC bypass, together with the optimization of NUCCC strategy, can potentially enable more efficient engine combustion and more cost-effective ammonia production. Optimization results based on the experimental data from a physical engine platform, demonstrate that the proposed new passive SCR system coupled with the NUCCC strategy, can reduce the ammonia specific fuel consumption (ASFC) by up to 29.8%. Such a novel engine combustion strategy and innovative aftertreatment system can be very instrumental in significantly reducing the fuel penalty associated with NOx emission control for lean-burn engines in the future.

Chen, Pingen↗

Compact microwave re-entrant cavity applicator for plasma-assisted combustion

The design and experimental operation of a compact microwave/rf applicator is described. This applicator operates at atmospheric pressure and couples electromagnetic energy into a premixed CH{sub 4}/O{sub 2} flame. The addition of only 2-15 W of microwave power to a premixed combustion flame with a flame power of 10-40 W serves to extend the flammability limits for fuel lean conditions, increases the flame length and intensity, and increases the number density and mixture of excited radical species in the flame vicinity. The downstream gas temperature also increases. Optical emission spectroscopy measurements show gas rotational temperatures in the range of 2500-3600 K. At the higher input power of {>=}10 W microplasma discharges can be produced in the high electric field region of the applicator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gasdynamic Model of Turbulent Combustion in TNT Explosions

A model is proposed to simulate turbulent combustion in confined TNT explosions. It is based on: (i) the multi-component gasdynamic conservation laws, (ii) a fast-chemistry model for TNT-air combustion, (iii) a thermodynamic model for frozen reactants and equilibrium products, (iv) a high-order Godunov scheme providing a non-diffusive solution of the governing equations, and (v) an ILES approach whereby adaptive mesh refinement is used to capture the energy bearing scales of the turbulence on the grid. Three-dimensional numerical simulations of explosion fields from 1.5-g PETN/TNT charges were performed. Explosions in six different chambers were studied: three calorimeters (volumes of 6.6-l, 21.2-l and 40.5-l with L/D = 1), and three tunnels (L/D = 3.8, 4.65 and 12.5 with volumes of 6.3-l) - to investigate the influence of chamber volume and geometry on the combustion process. Predicted pressures histories were quite similar to measured pressure histories for all cases studied. Experimentally, mass fraction of products, Y{sub p}{sup exp}, reached a peak value of 88% at an excess air ratio of twice stoichiometric, and then decayed with increasing air dilution; mass fractions Y{sub p}{sup calc} computed from the numerical simulations followed similar trends. Based on this agreement, we conclude that the dominant effect that controls the rate of TNT combustion with air is the turbulent mixing rate; the ILES approach along with the fast-chemistry model used here adequately captures this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate transport properties for H–CO and H–CO{sub 2}

Transport properties for collisions of hydrogen atoms with CO and CO{sub 2} have been computed by means of quantum scattering calculations. The carbon oxides are important species in hydrocarbon combustion. The following potential energy surfaces (PES’s) for the interaction of the molecule fixed in its equilibrium geometry were employed: for H–CO, the PES was taken from the work of Song et al. [J. Phys. Chem. A 117, 7571 (2013)], while the PES for H–CO{sub 2} was computed in this study by a restricted coupled cluster method that included single, double, and (perturbatively) triple excitations. The computed transport properties were found to be significantly different from those computed by the conventional approach that employs isotropic Lennard-Jones (12-6) potentials. The effect of using the presently computed accurate transport properties in 1-dimensional combustion simulations of methane-air flames was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-Temperature Magnetic Properties of Vanadium-Doped ZnO Nanoparticles

Low-temperature magnetic study of transition metal-doped ZnO nanoparticles tends to spring ambiguities of magnetic phases due to defect states, environment of doped ions, and anisotropy. Interestingly, vanadium doping in ZnO brings out versatile magnetic ordering which offers more room for basic understanding of the underlying mechanism. Vanadium-doped ZnO nanoparticles are prepared using a simple cost-effective approach of solution combustion method. Macroscopic and microscopic aspects of the samples have been unraveled using structural and morphological studies with the implications on the exhibited magnetic behavior. Development of antiferromagnetic, ferromagnetic, and ferrimagnetic interactions in the material illustrated by low-temperature magnetic measurements preludes the possible interplay of dopant-initiated defect correlation and morphological and interfacial secondary phases. The grain boundary reformation due to vanadium in the ZnO nanograins is exploited through a systematic correlation of structural and morphological studies in order to gain more insight into the portrayed magnetic signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Identification of combustion intermediates in a low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flame with tunable synchrotron photoionization

Low-pressure (4.0 kPa) premixed laminar 2,5-dimethylfuran (DMF)/oxygen/argon flame with an equivalence ratio of 2.0 was studied with tunable vacuum ultraviolet (VUV) synchrotron radiation photoionization and molecular-beam mass spectrometry. Photoionization mass spectra of DMF/O{sub 2}/Ar flame were recorded and the photoionization efficiency curves of the combustion intermediates were measured. Flame species, including isomeric intermediates, are identified by comparing the measured ionization energies with those reported in literatures or those calculated with Gaussian-3 procedure. More than 70 species have been detected, including furan and its derivatives, aromatics, and free radicals. Possible reaction pathways of DMF, 2-methylfuran, and furan are proposed based on the intermediates identified. DMF can be consumed by H-abstraction and pyrolysis reactions. 2-Methylfuran and furan can be consumed by H-abstraction, H-addition and pyrolysis reactions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural, optical and dielectric properties of La{sub 0.8}Ba{sub 0.2}FeO{sub 3} nanostructures synthesized by sol-gel combustion method

Barium doped lanthanum ferrite (LaFeO{sub 3}) nanoparticles (NPs) were prepared by gel combustion method and calcinated at 700°C. Microstructural studies were carried by XRD and SEM techniques. The results of structural characterization show the formation of all samples in single phase without any impurity. Optical properties were studied by UV- visible technique. The energy band gap was calculated and obtained 3.01 eV. Dielectric properties characterized by LCR meter and have been observed appreciable changes. The observed behavior of the dielectric properties can be attributed on the basis of Koop’s theory based on Maxwell-Wagner two layer models in studied nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of non-premixed oxygen-enhanced combustion: II. Flame structure effects on soot precursor kinetics resulting in soot-free flames

A detailed computational study was performed to understand the effects of the flame structure on the formation and destruction of soot precursors during ethylene combustion. Using the USC Mech Version II mechanism the contributions of different pathways to the formation of benzene and phenyl were determined in a wide domain of Z{sub st} values via a reverse-pathway analysis. It was shown that for conventional ethylene-air flames two sequential reversible reactions play primary roles in the propargyl (C{sub 3}H{sub 3}) chemistry, namely (1) C{sub 2}H{sub 2}+CH{sub 3}= pC{sub 3} H{sub 4}+H, (2) pC{sub 3} H{sub 4}= C{sub 3} H{sub 3}+ H with the corresponding overall endothermic reaction of propargyl formation (3) C{sub 2} H{sub 2}+CH{sub 3}= C{sub 3} H{sub 3}+2H. The contributions of these reactions to propyne (pC{sub 3}H{sub 4}) and propargyl formation and propargyl self-combination leading to benzene and phenyl were studied as a function of physical position, temperature, Z{sub st}, and H concentration. In particular, the role of H radicals on soot precursor destruction was studied in detail. At low Z{sub st}, Reactions 1 and 2 contribute significantly to propyne and propargyl formation on the fuel side of the radical pool at temperatures greater than approx. 1600 K. At higher local temperatures near the radical pool where the concentration of H is significant, the reverse reactions begin to dominate resulting in soot precursor destruction. As Z{sub st} is increased, these regions merge and only net propargyl consumption is observed. Based on the equilibrium constant of Reaction 3, a Z{sub st} value was estimated above which the rate of propargyl formation as a soot precursor is greatly reduced (Z{sub st} = 0.3). This condition compares well with the experimental results for permanently blue counterflow flames in the literature. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of fixed bed data for the extraction of a rate mechanism for the reaction of hematite with methane

In this study, chemical looping combustion is a promising technology for the capture of CO 2 involving redox materials as oxygen carriers. The effects of reduction conditions, namely, temperature and fuel partial pressure on the conversion products are investigated. The experiments were conducted in a laboratory fixed-bed reactor that was operated cyclically with alternating reduction and oxidation periods. Reactions are assumed to occur in the shell surrounding the particle grains with diffusion of oxygen to the surface from the grain core. Activation energies for the shell and core reactions range from 9 to 209 kJ/mol depending on the reaction step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heat and mass transfer in combustion - Fundamental concepts and analytical techniques

Fundamental combustion phenomena and the associated flame structures in laminar gaseous flows are discussed on physical bases within the framework of the three nondimensional parameters of interest to heat and mass transfer in chemically-reacting flows, namely the Damkoehler number, the Lewis number, and the Arrhenius number which is the ratio of the reaction activation energy to the characteristic thermal energy. The model problems selected for illustration are droplet combustion, boundary layer combustion, and the propagation, flammability, and stability of premixed flames. Fundamental concepts discussed include the flame structures for large activation energy reactions, S-curve interpretation of the ignition and extinctin states, reaction-induced local-similarity and non-similarity in boundary layer flows, the origin and removal of the cold boundary difficulty in modeling flame propagation, and effects of flame stretch and preferential diffusion on flame extinction and stability. Analytical techniques introduced include the Shvab-Zeldovich formulation, the local Shvab-Zeldovich formulation, flame-sheet approximation and the associated jump formulation, and large activation energy matched asymptotic analysis. Potentially promising research areas are suggested.

Law, C. K.↗

Soot formation and temperature structure in small methane-oxygen diffusion flames at subcritical and supercritical pressures

An experimental study was conducted to examine the characteristics of laminar methane-oxygen diffusion flames up to 100 atmospheres. The influence of pressure on soot formation and on the structure of the temperature field was investigated over the pressure range of 10-90 atmospheres in a high-pressure combustion chamber using a non-intrusive, line-of-sight spectral soot emission diagnostic technique. Two distinct zones characterized the appearance of a methane and pure oxygen diffusion flame: an inner luminous zone similar to the methane-air diffusion flames, and an outer diffusion flame zone which is mostly blue. The flame height, marked by the visible soot radiation emission, was reduced by over 50% over the pressure range of 10-100 atmospheres. Between 10 and 40 atmospheres, the soot levels increased with increasing pressure; however, above 40 atmospheres the soot concentrations decreased with increasing pressure. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic study of chemical looping reactions between solid carbon fuels and CuO

Copper (Cu) based chemical-looping combustion (CLC) is a promising process that utilizes solid carbon fuel such as coal and biomass. Understanding the reaction kinetics in this process can facilitate the industrial design of CLC units. Here, in this work, molecular dynamics (MD) simulations were performed to investigate the reaction kinetics of n-butane and two simplified solid carbon fuels (lignite and anthracite) with/without copper oxide (CuO) nanoparticle. In addition, experiments were conducted on the thermal characteristics, flammability, and flame speeds of CuO and solid carbon mixtures. For n-butane, oxidation on the CuO surface is the primary reaction since the activation energy of the surface reaction is much lower than that of oxygen (O 2 ) combustion (9.2 vs. 53.3 kcal/mol). On the other hand, for lignite, there is a smaller difference in the activation energy of O 2 combustion and surface reaction (23.04 vs. 6.34 kcal/mol). We hypothesize that some solid carbon fuels can have different reaction kinetics dependent upon temperature. This is proven by the case of a simplified anthracite coal: an Arrhenius plot shows that this solid carbon fuel has two different reaction kinetic regimes and the critical temperature for the change in kinetics is related to the oxygen uncoupling of the CuO nanoparticle. Like the modeling simulations, a change in activation energy is observed in the experimental results, where desorption of molecular oxygen from CuO becomes important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Salt-Assisted Solution Combustion Synthesis of Ni and Ni/NiO Powders

In this work, Ni and Ni/NiO composite powders were synthesized by one-pot solution combustion method using different fuel to oxidant (φ) ratios (φ = 1, 1.25, 1.5, and 1.75). Phase evolution studied by X-ray diffraction (XRD) method showed that single phase Ni powders were formed at high fuel contents, while the low fuel contents led to the formation of Ni/NiO composite powders. The high combustion temperature resulted in the sintered and large Ni particles (1.1 μm). The particle size decreased up to 50 nm by adding KCl as diluent. However, the amount of NiO phase increased by addition of KCl. The saturation magnetization (Ms) of Ni powders decreased from 51 to 42 emu/g with the increase of φ values from 1.25 to 1.75. The Ms decreased up to 18.5 emu/g, due to the formation of a large amount of NiO phase by addition of KCl. The coercivity of the synthesized powders was in the range of 78 to 111 Oe, as a function of particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large Eddy simulation of the Sandia Flame series (D-F) using the Eulerian stochastic field method

Three turbulent piloted methane jet flames with increasing levels of local extinction (Sandia Flames D-F) have been computed using Large Eddy simulation. The smallest unresolved scales of the flow, in which combustion occurs, are represented using the filtered probability density function method where the corresponding evolution equation is solved directly. A dynamic model for the sub-grid stresses together with a simple gradient diffusion approximation for the scalar fluxes is applied in conjunction with the linear mean square estimation closure for sub-filter scale mixing. An augmented reduced mechanism (ARM) derived from the full GRI 3.0 mechanism is incorporated to describe the chemical reaction. The results demonstrate the ability of the method in capturing quantitatively finite rate effects such as extinction and re-ignition in turbulent flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗