Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Cation-Dependent Light-Induced Halide Demixing in Hybrid Organic–Inorganic Perovskites

Mixed cation metal halide perovskites with increased power conversion efficiency, negligible hysteresis, and improved long-term stability under illumination, moisture, and thermal stressing have emerged as promising compounds for photovoltaic and optoelectronic applications. In this paper, we shed light on photoinduced halide demixing using in situ photoluminescence spectroscopy and in situ synchrotron X-ray diffraction (XRD) to directly compare the evolution of composition and phase changes in CH(NH 2 ) 2 CsPb-halide (FACsPb-) and CH 3 NH 3 Pb-halide (MAPb-) perovskites upon illumination, thereby providing insights into why FACs-perovskites are less prone to halide demixing than MA-perovskites. We find that halide demixing occurs in both materials. However, the I-rich domains formed during demixing accumulate strain in FACsPb-perovskites but readily relax in MA-perovskites. The accumulated strain energy is expected to act as a stabilizing force against halide demixing and may explain the higher Br composition threshold for demixing to occur in FACsPb-halides. In addition, we find that while halide demixing leads to a quenching of the high-energy photoluminescence emission from MA-perovskites, the emission is enhanced from FACs-perovskites. This behavior points to a reduction of nonradiative recombination centers in FACs-perovskites arising from the demixing process and buildup of strain. FACsPb-halide perovskites exhibit excellent intrinsic material properties with photoluminescence quantum yields that are comparable to MA-perovskites. Finally, because improved stability is achieved without sacrificing electronic properties, these compositions are better candidates for photovoltaic applications, especially as wide bandgap absorbers in tandem cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Role of Axial Ligation in Gating the Reactivity of Dimethylplatinum(III) Diimine Radical Cations

Electrochemical methods are coupled with chemical oxidant-based analytical strategies to evaluate the oxidative reactivity of the platinum(II) diimine complex (bpy)Pt II (CH 3 ) 2 (bpy = 2,2'-bipyridine) in coordinating and non-coordinating media. Through this mechanistic analysis, we show that the one-electron oxidation of (bpy)Pt II (CH 3 ) 2 generates a highly reactive, 15-electron Pt III radical cation and identify three reaction pathways that can follow this oxidation: radical–substrate dimerization, radical-radical dimerization, and oxidative disproportionation. Axial ligation of the initially generated [(bpy)Pt III (CH 3 ) 2 ] •+ species is a critical driver of this reactivity, gating the available mechanistic pathways and tuning the competition between radical–radical dimerization and oxidative disproportionation.

14 SOLAR ENERGY↗
DOE OSTI2023

Tuning Bulk Redox and Altering Interfacial Reactivity in Highly Fluorinated Cation-Disordered Rocksalt Cathodes

Lithium-excess, cation-disordered rocksalt (DRX) materials have been subject to intense scrutiny and development in recent years as potential cathode materials for Li-ion batteries. Despite their compositional flexibility and high initial capacity, they suffer from poorly understood parasitic degradation reactions at the cathode-electrolyte interface. These interfacial degradation reactions deteriorate both the DRX material and electrolyte, ultimately leading to capacity fade and voltage hysteresis during cycling. In this work, differential electrochemical mass spectrometry (DEMS) and titration mass spectrometry are combined to quantify the extent of bulk redox and surface degradation reactions for a set of Mn 2+/4+ -based DRX oxyfluorides during initial cycling with a high-voltage charging cutoff (4.8 V vs Li/Li + ). Increasing the fluorine content from 7.5 to 33.75% is shown to diminish oxygen redox and suppresses high-voltage O 2 evolution from the DRX surface. Additionally, electrolyte degradation processes resulting in the formation of both gaseous species and electrolyte-soluble protic species are observed. Subsequently, DEMS is paired with a fluoride-scavenging additive to demonstrate that increasing fluorine content leads to increased dissolution of fluorine from the DRX material into the electrolyte. Finally, a suite of ex situ spectroscopy techniques (X-ray photoelectron spectroscopy, inductively coupled plasma optical emission spectroscopy, and solid-state nuclear magnetic resonance spectroscopy) are employed to study the change in DRX composition during charging, revealing the dissolution of manganese and fluorine from the DRX material at high voltages. Here this work provides insight into the degradation processes occurring at the DRX-electrolyte interface and points toward potential routes of interfacial stabilization.

25 ENERGY STORAGE↗
DOE OSTI2015

The Role of Cesium Cation in Controlling Interphasial Chemistry on Graphite Anode in Propylene Carbonate-Rich Electrolytes

Propylene carbonate (PC) is seldom used in lithium-ion batteries (LIBs) due to its sustained co-intercalation into graphene structure and the eventual graphite exfoliation, despite potential advantages it brings, such as wider liquid range and lower cost. Here we discover that cesium cation (Cs+), originally used to suppress dendrite growth of Li metal anode, directs the formation of solid electrolyte interphase (SEI) on graphitic anode in PC-rich electrolytes through preferential solvation. Effective suppression of PC-decomposition and graphite-exfoliation was achieved when the ratio of ethylene carbonate (EC)/PC in electrolytes was so adjusted that the reductive decomposition of Cs+-(EC)m (1≤m≤2) complex precedes that of Li+-(PC)n (3≤n≤5). The interphase directed by Cs+ is stable, ultrathin and compact, leading to significant improvements in LIB performances. In a broader context, the accurate tailoring of SEI chemical composition by introducing a new solvation center represents a fundamental breakthrough in manipulating interfacial reactions processes that once were elusive.

cesium cation↗
DOE OSTI2026

Phase Transformation Enables Stable Cycling and Fast Charging of Cation-Disordered Rocksalt Cathodes

Developing high-capacity, long-life cathodes is critical to overcome the energy limitations of current Li-ion batteries. In this work, we report a Li-excess cation-disordered rocksalt (DRX) cathode, Li 1.167 Mn0.7Ti 0.133 O 1.8 F 0.2 (M 0.7 F 0.2 ), which demonstrates excellent electrochemical performance. This cathode delivers a capacity approaching 250 mAh g –1 and maintains 200 mAh g –1 over 200 cycles with an average discharge voltage of 3.1 V at 2 V cutoff. The formation of a spinel-like phase during cycling enables fast charging, achieving over 240 mAh g –1 at 2C for 100 cycles. Combined X-ray absorption spectroscopy and transmission electron microscopy reveal reversible electrochemical redox processes and stable Mn local structures during 2 V discharge. These results highlight the potential of DRX cathodes for next-generation Li-ion batteries and provide insights into strategies to overcome kinetic limitations and optimize the cathode-electrolyte interface.

25 ENERGY STORAGE↗
DOE OSTI2024

Local A-Site Phase Segregation Leads to Cs-Rich Regions Showing Accelerated Photodegradation in Mixed-Cation Perovskite Semiconductor Films

We use hyperspectral photoluminescence microscopy to study compositional heterogeneity and its influence on the stability of mixed-cation (formamindinium (FA) and cesium) FA 1-x Cs x Pb(I 0.9 Br 0.1 ) 3 lead halide perovskites with different Cs contents. We observe substantial microscale heterogeneity in the photoluminescence. By correlating photoluminescence maps with time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging, we show that the redder-photoluminescence regions of the perovskite film are associated with Cs-rich compositions. X-ray diffraction measurement and confocal Raman spectroscopy provide evidence for the presence of d-phase CsPbI x Br 3-x in these regions. Photo-aging tests show that these Cs-rich clusters undergo faster photoluminescence decay than the rest of the film. These observations highlight the importance of local heterogeneities and their influence on the stability of halide perovskite semiconductors being studied for optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Harnessing Cation Disorder for Enhancing Ionic Conductivity in Lithium Inverse Spinel Halides

Halides are promising solid-state electrolytes for all-solid-state lithium batteries due to their exceptional oxidation stability, high Li-ion conductivity, and mechanical deformability. However, their practicality is limited by the reliance on rare and expensive metals. This study investigates the Li 2 MgCl 4 inverse spinel system as a cost-effective alternative. Molecular dynamics simulations reveal that lithium disordering at elevated temperatures significantly reduces the activation energy in Li 2 MgCl 4 . To stabilize this disorder at lower temperatures, we experimentally explored the Li x Zr 1–x/2 Mg x/2 Cl 4 system and found that Zr doping induces both Zr and Li disorder at the 16c site at room temperature (RT). This leads to a 2 order-of-magnitude increase in ionic conductivity for the Li 1.25 Zr 0.375 Mg 0.625 Cl 4 composition, achieving 1.4 × 10 –5 S cm –1 at RT, compared to pristine Li 2 MgCl 4 . By deconvoluting the role of lithium vacancies and dopants, we reveal that cation disordering to the 16c site predominantly enhances ionic conductivity, whereas lithium vacancy concentration has a very limited effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

Ammonia-selective adsorbents can manage reactive nitrogen in the environment and promote a circular nutrient economy. Weak acid cation exchangers loaded with zinc exhibit high ammonia selectivity but face two implementation barriers: the stability of the zinc–carboxylate bond in complex wastewaters and energy- and logistics-intensive adsorbent regeneration with acidic solutions. In this paper, we examined the stability of zinc–carboxylate bonds in varying solutions (pure ammonium solution, synthetic urine, and real urine) and during electro-assisted regeneration. For electrochemical regeneration, both electrolyte concentration and current density influenced the trade-off between ammonia regeneration and zinc elution. Using 10 mM K 2 SO 4 anolyte at a 0.08 mA/cm 2 current density, we achieved 4% zinc elution and 61% ammonia regeneration. In contrast, using 100 mM K 2 SO 4 at 4.96 mA/cm 2 improved the regeneration efficiency to 97% but eluted 60% of zinc. We found that electrolyte concentration was the key factor influencing the regeneration efficiency of the NH 3 -selective adsorbents. Due to prevalent zinc elution, we designed an in situ procedure for reforming the zinc–carboxylate bond and achieved similar adsorption densities between pre- and post-regenerated resins, thus enabling multiple cycle resin use. Ultimately, this study advances understanding of ammonia-selective resins that can facilitate high-purity, selective, and durable recovery of nutrients from waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Perovskite Quantum Dot Photovoltaic Materials beyond the Reach of Thin Films: Full-Range Tuning of A-Site Cation Composition

We present a cation-exchange approach for tunable A-site alloys of cesium (Cs + ) and formamidinium (FA + ) lead triiodide perovskite nanocrystals that enables the formation of compositions spanning the complete range of Cs 1-x FA x PbI 3 , unlike thin-film alloys or the direct synthesis of alloyed perovskite nanocrystals. These materials show bright and finely tunable emission in the red and near-infrared range between 650 and 800 nm. The activation energy for the miscibility between Cs + and FA + is measured (~0.65 eV) and is shown to be higher than reported for X-site exchange in lead halide perovskites. We use these alloyed colloidal perovskite quantum dots to fabricate photovoltaic devices. In addition to the expanded compositional range for Cs 1-x FA x PbI 3 materials, the quantum dot solar cells exhibit high open-circuit voltage (VOC) with a lower loss than the thin-film perovskite devices of similar compositions.

14 SOLAR ENERGY↗
DOE OSTI2019

Curie Temperature Enhancement and Cation Ordering in Titanomagnetites: Evidence From Magnetic Properties, XMCD, and Mössbauer Spectroscopy

Previous work has documented time- and temperature-dependent variations in the Curie temperature (T c ) of natural titanomagnetites, independent of any changes in sample composition. To better understand the atomic-scale processes responsible for these variations, we have generated a set of synthetic titanomagnetites with a range of Ti, Mg, and Al substitution; a subset of samples was additionally oxidized at low temperature (150 °C). Samples were annealed at temperatures between 325 and 400 °C for up to 1,000 hr and characterized in terms of magnetic properties; Fe valence and site occupancy were constrained by X-ray magnetic circular dichroism (XMCD) and Mössbauer spectroscopy. Annealing results in large (up to ~100 °C) changes in T c , but Mössbauer, XMCD, and saturation magnetization data all demonstrate that intersite reordering of Fe 2+ /Fe 3+ does not play a role in the observed T c changes. Rather, the data are consistent with vacancy-enhanced nanoscale chemical clustering within the octahedral sublattice. This clustering may be a precursor to chemical unmixing at temperatures below the titanomagnetite binary solvus. Additionally, the data strongly support a model where cation vacancies are predominantly situated on octahedral sites, Mg substitution is largely accommodated on octahedral sites, and Al substitution is split between the two sites.

58 GEOSCIENCES↗
DOE OSTI2025

Impacts of molecular architecture on the radiation-induced degradation and reaction kinetics of hydrophobic diglycolamides with the solvated electron and the dodecane radical cation

Given their proposed use as trivalent actinide–lanthanide separation ligands, the role of molecular architecture on the radiation robustness of diglycolamide (DGA) molecules has been investigated. This study examined three prototypical molecules with differences in their aliphatic chain architecture: N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA), N,N,N′,N′-tetra(2-ethylhexyl)diglycolamide (T2EHDGA), and N,N′-dimethyl-N,N′-dioctyldiglycolamide (DMDODGA). Rate coefficients and activation parameters are reported for the reactivity of each DGA with the solvated electron (e solv − ) and the corresponding dodecane radical cation (RH˙ + ) over the temperature range of 10.0 to 44.1 °C. These measurements indicate that DMDODGA is the most chemically reactive with both transient radicals, which may be attributed to this molecule's more accessible backbone. Complementary gamma dose accumulation studies (≤ 600 kGy) under envisioned process conditions—50 mM DGA in n-dodecane solvent—afforded dose constants for the loss of DGA of d = (3.41 ± 0.07) × 10 −3 , (4.19 ± 0.09) × 10 −3 , and (4.65 ± 0.09) × 10 −3 kGy −1 for T2EHDGA, DMDODGA, and TODGA, respectively. These dose constants indicate that varying DGA architecture affords subtle differences in chemical reactivity, leading to varying rates of radiolytic degradation under envisioned actinide–lanthanide separation conditions. However, more ambitious DGA frameworks, such as modifying the backbone, branching of the aliphatic chains, and/or changing the size of the chain may be required for larger gains in radiolytic longevity while optimizing actinide–lanthanide selectivity.

Arrhenius parameters↗
DOE OSTI2013

Cation size effect on the thermochromic properties of rare earth cobaltites RECoO{sub 3} (RE: La, Nd, Sm)

RECoO{sub 3} (RE: rare earth) perovskite thin films have been deposited at room temperature by direct current co-sputtering and subsequent annealing in air at 923 K during 1 day. The effect of the octahedra tilts on the optical properties has been tracked decreasing the RE cation size. The bending and stretching vibrational modes of the CoO{sub 6/2} octahedra give information on the Co–O distances and the Co–O–Co angles which determine the Co–O overlap integral and hence the electric properties of these perovskites. Transmittance measurements in the 1.42–100 μm wavelength range show a high transparency at room temperature. When temperature increases, an optical screening effect depending on the RE{sup 3+} ionic radii (i.e., Co-O-Co angles) and resulting from the electrical behaviour occurs. At the wavelength of 8 μm, the transmittance drops from about 90% at room temperature to 50% at the temperature of 516, 600, and 640 K for LaCoO{sub 3}, NdCoO{sub 3}, and SmCoO{sub 3}, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2013

A search for the sulphur hexafluoride cation with intense, few cycle laser pulses

It is well established that upon ionization of sulphur hexafluoride, the SF{sub 6}{sup +} ion is never observed in mass spectra. Recent work with ultrashort intense laser pulses has offered indications that when strong optical field are used, the resulting “bond hardening” can induce changes in the potential energy surfaces of molecular cations such that molecular ions that are normally unstable may, indeed, become metastable enough to enable their detection by mass spectrometry. Do intense, ultrashort laser pulses permit formation of SF{sub 6}{sup +}? We have utilized intense pulses of 5 fs, 11 fs, and 22 fs to explore this possibility. Our results are negative: no evidence is discovered for SF{sub 6}{sup +}. However, multiply charged sulphur and fluorine ions from highly charged SF{sub 6}{sup q+} ions are observed that enable us to resolve the controversy regarding the kinetic energy release accompanying formation of F{sup +} fragment ions. Quantum chemical computations of field-distorted potential energy curves of SF{sub 6} and its molecular ion enable us to rationalize our non-observation of SF{sub 6}{sup +}. Our findings have implications for high harmonic generation from SF{sub 6} in the few-cycle regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Functional Mn–Mg{sub k} cation complexes in GaN featured by Raman spectroscopy

The evolution of the optical branch in the Raman spectra of (Ga,Mn)N:Mg epitaxial layers as a function of the Mn and Mg concentrations, reveals the interplay between the two dopants. We demonstrate that the various Mn-Mg-induced vibrational modes can be understood in the picture of functional Mn–Mg{sub k} complexes formed when substitutional Mn cations are bound to k substitutional Mg through nitrogen atoms, the number of ligands k being driven by the ratio between the Mg and the Mn concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Mutual neutralization of atomic rare-gas cations (Ne{sup +}, Ar{sup +}, Kr{sup +}, Xe{sup +}) with atomic halide anions (Cl{sup −}, Br{sup −}, I{sup −})

We report thermal rate coefficients for 12 reactions of rare gas cations (Ne{sup +}, Ar{sup +}, Kr{sup +}, Xe{sup +}) with halide anions (Cl{sup −}, Br{sup −}, I{sup −}), comprising both mutual neutralization (MN) and transfer ionization. No rate coefficients have been previously reported for these reactions; however, the development of the Variable Electron and Neutral Density Attachment Mass Spectrometry technique makes it possible to measure the difference of the rate coefficients for pairs of parallel reactions in a Flowing Afterglow-Langmuir Probe apparatus. Measurements of 18 such combinations of competing reaction pairs yield an over-determined data set from which a consistent set of rate coefficients of the 12 MN reactions can be deduced. Unlike rate coefficients of MN reactions involving at least one polyatomic ion, which vary by at most a factor of ∼3, those of the atom-atom reactions vary by at least a factor 60 depending on the species. It is found that the rate coefficients involving light rare-gas ions are larger than those for the heavier rare-gas ions, but the opposite trend is observed in the progression from Cl{sup −} to I{sup −}. The largest rate coefficient is 6.5 × 10{sup −8} cm{sup 3} s{sup −1} for Ne{sup +} with I{sup −}. Rate coefficients for Ar{sup +}, Kr{sup +}, and Xe{sup +} reacting with Br{sub 2}{sup −} are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Optical and electronic properties of mixed Ag-Au tetramer cations

We present experimental and theoretical studies of the optical response of mixed Ag {sub n} Au {sub 4−n}{sup +} (n=1–3) clusters in the photon energy range ℏω = 1.9–3.5 eV. Absorption spectra are recorded by a newly built longitudinal molecular beam depletion spectroscopy apparatus providing lower limits to absolute photodissociation cross sections. The experimental data are compared to optical response calculations in the framework of long-range corrected time-dependent density functional theory with initial cluster geometries obtained by the unbiased Birmingham Cluster Genetic Algorithm coupled with density functional theory. Experiments and excited state calculations shed light on the structural and electronic properties of the mixed Ag-Au tetramer cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Site occupancy and cation binding states in reduced polycrystalline Sr{sub x}Ba{sub 1−x}Nb{sub 2}O{sub 6}

Site occupancy and cation binding states in the proposed thermoelectric n-type oxide Sr{sub x}Ba{sub 1−x}Nb{sub 2}O{sub 6} (SBN100x) were investigated using X-ray photoelectron spectroscopy (XPS). Sr 3d XPS spectra from unreduced polycrystalline SBN100x with various compositions contained two distinct spin-orbit doublets corresponding to Sr occupying either A1 or A2 positions in the SBN lattice; the higher binding energy state was associated with Sr ions at A2 sites, presumably due to their increased coordination over Sr at A1 sites. To gain insight into optimizing the thermoelectric properties of reduced SBN, sintered SBN50 specimens were reduced in Ar/H{sub 2} or N{sub 2}/H{sub 2} ambient. A decrease in the average Nb valence was observed in Nb 3d photoemission through the growth of low-binding energy components after reduction in either environment; evidence of surface NbN formation was apparent with longer reducing times in N{sub 2}/H{sub 2}. Both the single-component Ba 3d emission and the A2 component of the Sr 3d spectra show shifting to lower binding energy as the reduction time is increased, supporting the hypothesis of preferential oxygen vacancy formation adjacent to A2 sites. X-ray diffraction patterns revealed the formation of NbO{sub 2} in both reducing environments; in the case of extended reduction in N{sub 2}/H{sub 2}, NbO{sub 2} is gradually converted to NbN phases. Given the known properties of metallic NbN and semiconducting NbO{sub 2}, the findings obtained here may be used to maximize the thermoelectric performance of SBN via the fabrication of composite structures containing both NbO{sub 2} and NbN.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Impact of cation-based localized electronic states on the conduction and valence band structure of Al{sub 1−x}In{sub x}N alloys

We demonstrate that cation-related localized states strongly perturb the band structure of Al{sub 1−x}In{sub x}N leading to a strong band gap bowing at low In content. Our first-principles calculations show that In-related localized states are formed both in the conduction and the valence band in Al{sub 1−x}In{sub x}N for low In composition, x, and that these localized states dominate the evolution of the band structure with increasing x. Therefore, the commonly used assumption of a single composition-independent bowing parameter breaks down when describing the evolution both of the conduction and of the valence band edge in Al{sub 1−x}In{sub x}N.

36 MATERIALS SCIENCE↗