Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Preconditioned Conjugate Gradient methods for low speed flow calculations

An investigation is conducted into the viability of using a generalized Conjugate Gradient-like method as an iterative solver to obtain steady-state solutions of very low-speed fluid flow problems. Low-speed flow at Mach 0.1 over a backward-facing step is chosen as a representative test problem. The unsteady form of the two dimensional, compressible Navier-Stokes equations are integrated in time using discrete time-steps. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux split formulation. The new iterative solver is used to solve a linear system of equations at each step of the time-integration. Preconditioning techniques are used with the new solver to enhance the stability and the convergence rate of the solver and are found to be critical to the overall success of the solver. A study of various preconditioners reveals that a preconditioner based on the lower-upper (L-U)-successive symmetric over-relaxation iterative scheme is more efficient than a preconditioner based on incomplete L-U factorizations of the iteration matrix. The performance of the new preconditioned solver is compared with a conventional line Gauss-Seidel relaxation (LGSR) solver. Overall speed-up factors of 28 (in terms of global time-steps required to converge to a steady-state solution) and 20 (in terms of total CPU time on one processor of a CRAY-YMP) are found in favor of the new preconditioned solver, when compared with the LGSR solver.

Ajmani, Kumud↗
NASA NTRS1986

Summary of AH-1G flight vibration data for validation of coupled rotor-fuselage analyses

Under a NASA research program designated DAMVIBS (Design Analysis Methods for VIBrationS), four U. S. helicopter industry participants (Bell Helicopter, Boeing Vertol, McDonnell Douglas Helicopter, and Sikorsky Aircraft) are to apply existing analytical methods for calculating coupled rotor-fuselage vibrations of the AH-1G helicopter for correlation with flight test data from an AH-1G Operational Load Survey (OLS) test program. Bell Helicopter, as the manufacturer of the AH-1G, was asked to provide pertinent rotor data and to collect the OLS flight vibration data needed to perform the correlations. The analytical representation of the fuselage structure is based on a NASTRAN finite element model (FEM) developed by Bell which has been extensively documented and correlated with ground vibration tests.The AH-1G FEM was provided to each of the participants for use in their coupled rotor-fuselage analyses. This report describes the AH-1G OLS flight test program and provides the flight conditions and measured vibration data to be used by each participant in their correlation effort. In addition, the mechanical, structural, inertial and aerodynamic data for the AH-1G two-bladed teetering main rotor system are presented. Furthermore, modifications to the NASTRAN FEM of the fuselage structure that are necessary to make it compatible with the OLS test article are described. The AH-1G OLS flight test data was found to be well documented and provide a sound basis for evaluating currently existing analysis methods used for calculation of coupled rotor-fuselage vibrations.

Dompka, R. V.↗
NASA NTRS1933

Increasing the volumetric efficiency of Diesel engines by intake pipes

Development of a method for calculating the volumetric efficiency of piston engines with intake pipes. Application of this method to the scavenging pumps of two-stroke-cycle engines with crankcase scavenging and to four-stroke-cycle engines. The utility of the method is demonstrated by volumetric-efficiency tests of the two-stroke-cycle engines with crankcase scavenging. Its practical application to the calculation of intake pipes is illustrated by example.

List, Hans↗
NASA NTRS1988

Application of unsteady aerodynamic methods for transonic aeroelastic analysis

Aerodynamic methods for aeroelastic analysis are applied to various flow problems. These methods include those that solve the three dimensional transonic small disturbance (TSD) potential equation, the two dimensional (2-D) full potential (FP) equation, and the 2-D thin layer Navier-Stokes equations. Flutter analysis performed using TSD aerodynamics show that such methods can be used to analyze some aeroelastic phenomena. For thicker bodies and larger amplitude motions, a nonisentropic FP method is presented. The unsteady FP equation is modified to model the entropy jumps across shock waves. The conservative form of the modified equation is solved in generalized coordinates using an implicit, approximate factorization method. Pressures calculated on the NLR 7301 and NACA 64A010A airfoils using the nonisentropic FP method are presented. It is shown that modeling shock generated entropy extends the range of validity of the FP method. A Navier-Stokes code is correlated with pressures measured on a supercritical airfoil at transonic speeds. When corrections are made for wind tunnel wall effects, the calculations correlate well with the measured data.

Whitlow, Woodrow, Jr.↗
NASA NTRS1979

Acceleration of transonic potential flow calculations on arbitrary meshes by the multiple grid method

A multiple grid method for transonic flow calculations is developed. The proposed scheme incorporates a generalized alternating direction method as the smoothing algorithm. Numerical experiments indicate that this multigrid alternating direction method converges rapidly and reliably for a range of cases typical of the cruising regime up to the onset of drag rise. It also appears that the method can be readily generalized to treat three-dimensional flows.

Jameson, A.↗
NASA NTRS1979

Tropospheric UV flux calculations and photolysis rates for use with zonally and diurnally averaged models

A computationally fast and efficient method for calculating solar UV fluxes in the troposphere is developed. Calculated fluxes compare favorably with more rigorous multiple scattering results, and qualitatively correct behavior of the direct and diffuse flux components is maintained. In view of the relatively large uncertainties in other aspects of tropospheric photochemical models, the use of approximate UV flux calculations appears warranted. The technique is applied to the calculation of photolysis rates for twelve significant photolytic reactions of nine species.

Matloff, G. L.↗
NASA NTRS1988

Calculation of non-stationary aerodynamic forces in the near sonic range

The development of a mathematical method for calculating nonstationary supersonic flow in the near-sonic range is described. A perturbation formula is derived based on the exact stationary values; it is applicable to the equation for potential. The problem can thus be divided into stationary and nonstationary fields. The pressure distribution in an oscillating profile is determined, based on hyperbolic differential equations. It is shown that there are important corollaries concerning the application of linear theory. With suitable extrapolations, linear theory can be used up to about Mach 0.8. Linear theory is not applicable, however, when determining the moment coefficients; for this case, a special technique is described.

Teipel, I.↗
NASA NTRS1974

Characteristic features of determining the labor input and estimated cost of the development and manufacture of equipment

The difficulties in obtaining exact calculation data for the labor input and estimated cost are noted. The method of calculating the labor cost of the design work using the provisional normative indexes with respect to individual forms of operations is proposed. Values of certain coefficients recommended for use in the practical calculations of the labor input for the development of new scientific equipment for space research are presented.

Kurmanaliyev, T. I.↗
NASA NTRS1975

Method of predicting radiation heat transfer in turbine cooling test facilities

A method is presented for calculating the average net radiation heat flux to turbine vanes and blades. The net radiation heat flux at a vane leading edge calculated by this method was compared with heat flux values independently determined from experimental tests on a vane in a cascade. The spectral emissivities of the turbine vane and the cascade wall were also measured.

Gladden, H. J.↗
NASA NTRS1979

On the Routh approximation technique and least squares errors

A new method for calculating the coefficients of the numerator polynomial of the direct Routh approximation method (DRAM) using the least square error criterion is formulated. The necessary conditions have been obtained in terms of algebraic equations. The method is useful for low frequency as well as high frequency reduced-order models.

Aburdene, M. F.↗
NASA NTRS1988

A general formalism for phase space calculations

General formulas for calculating the interactions of galactic cosmic rays with target nuclei are presented. Methods for calculating the appropriate normalization volume elements and phase space factors are presented. Particular emphasis is placed on obtaining correct phase space factors for 2-, and 3-body final states. Calculations for both Lorentz-invariant and noninvariant phase space are presented.

Norbury, John W.↗
NASA NTRS1990

Numerical study of vortical flow over a sideslipping delta wing

The three-dimensional vortical viscous flow past a sideslipping delta wing at a high angle of attack is numerically investigated. A computational method for calculating low-speed viscous flowfields is developed. The time-iterative method uses an implicit upwind-relaxation finite-difference algorithm with a nonsingular eigensystem to solve the preconditioned, three-dimensional, incompressible Navier-Stokes equations in curvilinear coordinates. An algebraic turbulence model is implemented to account for the eddy viscosity. The technique of local time stepping is incorporated to accelerate the rate of convergence to a steady-state solution. Computed results are compared with experimental data.

Hsu, C.-H.↗
NASA NTRS1998

Elastic Buckling of Laminated Plates Under Varying Axial Stresses

The elastic buckling load of simply supported rectangular composite plates subjected to a second degree parabolic variation of axial stresses in the longitudinal direction is calculated using analytical methods. The variation of axial stresses is equilibrated by nonuniform shear stresses along the plate edges and transverse normal stresses. Numerical results are reported for three different cases: (1) orthotropic plates, (2) symmetrically laminated plates with multiple generally orthotropic layers exhibiting coupling between normal moments and twist, and twisting moment and normal curvatures, and (3) unsymmetrically laminated plates. Rayleigh-Ritz method is used to calculate the buckling load. An approximate solution using "reduced bending stiffness" is adopted for unsymmetrically laminated plates. The influence of the aspect ratio is examined, and the results are compared with plates subjected to uniform axial stresses.

Badir, A.↗
NASA NTRS2003

A Comparison of Northern and Southern Hemisphere Cross-tropopause Ozone Flux

A novel method of calculating the downward ozone flux across the midlatitude (30 deg-60 deg) tropopause shows the Northern Hemisphere (NH) ozone flux to be significantly larger (approximately 24%) than that calculated in the Southern Hemisphere (SH) during the year 2000. This diagnostic method makes it possible to separate dynamical aspects of transport from the seasonal cycle of ozone in the lowermost stratosphere and explain the hemispheric difference in the ozone flux. The SH total horizontal area of exchange is equal to or slightly greater than the area of exchange in the NH throughout an annual cycle. The mean changes in potential vorticity of parcels near the tropopause are also similar or slightly greater in the SH, suggesting that NH and SH downward total mass transport to the troposphere are comparable. These results imply that the greater NH ozone flux is mostly due to the amount of ozone available for exchange rather than net hemispheric dynamical differences near the tropopause level.

Olsen, M. A.↗
NASA NTRS1991

Calculation of flow about two-dimensional bodies by means of the velocity-vorticity formulation on a staggered grid

A method for calculating the incompressible viscous flow about two-dimensional bodies, utilizing the velocity-vorticity form of the Navier-Stokes equations using a staggered-grid formulation is presented. The solution is obtained by employing an alternative-direction implicit method for the solution of the block tridiagonal matrix resulting from the finite-difference representation of the governing equations. The boundary vorticity and the conservation of mass are calculated implicitly as a part of the solution. The mass conservation is calculated to machine zero for the duration of the computation. Calculations for the flow about a circular cylinder, a 2-pct thick flat plate at 90-deg incidence, an elliptic cylinder at 45-deg incidence, and a NACA 0012, with and without a deflected flap, at - 90-deg incidence are performed and compared with the results of other numerical investigations.

Stremel, Paul M.↗
NASA NTRS1988

Method and models for R-curve instability calculations

This paper presents a simple method for performing elastic R-curve instability calculations. For a single material-structure combination, the calculations can be done on some pocket calculators. On microcomputers and larger, it permits the development of a comprehensive program having libraries of driving force equations for different configurations and R-curve model equations for different materials. The paper also presents several model equations for fitting to experimental R-curve data, both linear elastic and elastoplastic. The models are fit to data from the literature to demonstrate their viability.

Orange, Thomas W.↗