Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base Line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗
DOE OSTI2025

Actinomycetota isolated from the sponge Hymeniacidon perlevis as a source of novel compounds with pharmacological applications: diversity, bioactivity screening, and metabolomic analysis

Abstract Aims To combat health conditions, such as multi-resistant bacterial infections, cancer, and metabolic diseases, new drugs need to be urgently found and, in this respect, marine Actinomycetota have a high potential to produce secondary metabolites with pharmacological importance. We aimed to study the cultivable Actinomycetota community associated with a marine sponge from the Portuguese coast, Hymeniacidon perlevis, and investigate the potential of the retrieved isolates to produce compounds with antimicrobial, anticancer and anti-obesity properties. Methods and results The analysis of the 16S rRNA gene revealed 79 Actinomycetota isolates affiliated with 12 genera—Brachybacterium, Dietzia, Glutamicibacter, Gordonia, Micrococcus, Micromonospora, Nocardia, Nocardiopsis, Paenoartrhobacter, Rhodococcus, Streptomyces, and Tsukamurella, most of which affiliated with the genus Streptomyces. The screening of antimicrobial activity revealed 13 strains, all belonging to the Streptomyces genus, capable of inhibiting the growth of Candida albicans, Bacillus subtilis, or Staphylococcus aureus. Forty-three extracts exhibited cytotoxic activity against at least one tested cell line (HepG2, HCT-116, and hCMEC-D3). Three extracts that were active against the two cancer cell lines tested, did not reduce the viability of the non-cancer endothelial cell line, hCMEC-D3. One Gordonia strain exhibited anti-obesity activity, revealed by its ability to reduce the neutral lipids in zebrafish larvae. Mass spectrometry-based dereplication analysis of active extracts identified several compounds associated with known Actinomycetota natural products. Nonetheless, five clusters contained metabolites that did not match any annotated natural products, suggesting they may represent new bioactive molecules. Conclusions This work contributed to increase the knowledge on the diversity and bioactive potential of Actinomycetota associated with H. perlevis.

Fonseca, Ana C.↗
DOE OSTI2024

The auxin efflux carrier PIN1a regulates vascular patterning in cereal roots

Barley (Hordeum vulgare) is an important global cereal crop and a model in genetic studies. Despite advances in characterising barley genomic resources, few mutant studies have identified genes controlling root architecture and anatomy, which plays a critical role in capturing soil resources. Our phenotypic screening of a TILLING mutant collection identified line TM5992 exhibiting a short-root phenotype compared with wild-type (WT) Morex background. Outcrossing TM5992 with barley variety Proctor and subsequent SNP array-based bulk segregant analysis, fine mapped the mutation to a cM scale. Exome sequencing pinpointed a mutation in the candidate gene HvPIN1a, further confirming this by analysing independent mutant alleles. Detailed analysis of root growth and anatomy in Hvpin1a mutant alleles exhibited a slower growth rate, shorter apical meristem and striking vascular patterning defects compared to WT. Expression and mutant analyses of PIN1 members in the closely related cereal brachypodium (Brachypodium distachyon) revealed that BdPIN1a and BdPIN1b were redundantly expressed in root vascular tissues but only Bdpin1a mutant allele displayed root vascular defects similar to Hvpin1a. We conclude that barley PIN1 genes have sub-functionalised in cereals, compared to Arabidopsis (Arabidopsis thaliana), where PIN1a sequences control root vascular patterning.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Initial in-orbit operation of the soft X-ray spectrometer Resolve onboard the X-ray imaging and spectroscopy mission satellite

The X-Ray Imaging and Spectroscopy Mission satellite was launched on September 6, 2023 (UT). Its Resolve instrument is a high-resolution X-ray spectrometer enabled by a microcalorimeter array thermally anchored to a 50-mK heat sink. Many sensitive, critical sub-systems comprise Resolve, including a multistage cryogenic cooling system, thin-film aperture filters, low-noise electronics, on-board signal processing, and several sources of X-rays for calibration. We summarize the initial on-orbit power-on and checkout of Resolve that commenced immediately after launch. Soon after launch, the cryocoolers were activated, and their operation was successfully established. On October 9, 2023, the first cycle of the adiabatic demagnetization refrigerator was carried out, bringing the sensors to their steady-state operational temperatures. Following this, the energy resolution at 5.9 keV was successfully measured. The energy scale of the system is highly sensitive to the thermal environment surrounding both the sensors and their analog electronics. Gain correction was performed using reference X-ray lines from onboard calibration sources. To optimize cooler frequency settings, noise spectra were collected across a range of frequencies, and the most suitable frequency pair was selected based on the in-orbit environment. During the final phase of the checkout, an attempt was made to open the gate valve, which is designed to protect the Dewar’s interior from external pressure during ground operations and launch. Unfortunately, this attempt was unsuccessful. As a result, the checkout process was temporarily paused, and a stable operational strategy was subsequently developed to enable Resolve to function effectively with the gate valve remaining closed.

X-ray micro-calorimeter↗
DOE OSTI2020

Custom NEON AOP reflectance mosaics and maps of shade masks, canopy water content

This mosaic of visible to shortwave infrared (VSWIR) data was derived from the assignable asset NEON AOP radiance data that was collected by LBNL’s Watershed Function SFA during the summer of 2018 (DOI: 10.15485/1617204). This atmospheric correction was completed to take into account site-specific terrain variability in the 334 km2 survey area centered around Crested Butte, CO. The atmospheric correction was completed using ACORN atmospheric correction software executed on 200 x 200 pixel kernels rather than line by line in order to capture local flight altitude conditions. Manual cloud delineation removed any small shaded areas that occurred within the data collection areas. Mosaics were developed based on preference for days that were in close timing proximity to the coincident ground campaign and with mosaicing criteria that minimized the angle between the sun and the sensor to retrieve the most consistent reflectance (min_phase_refl_tiled). Finally, we generated shade masks based on the geometry between the sun angle at time of flight, the ground surface, and the sensor. Here we provide the orthomosaiced estimated reflectance data (min_phase_refl_tiled.tif), canopy water content (wtrl), estimated atmospheric water vapor (wtrv), the observational data (obs) for this particular mosaic, the estimated visibility (vis), shade masks derived from the digital surface elevation model (shade) and the digital terrain model (shade_tch) added to the canopy height model (DOI: 10.15485/1617203), and a wavelength metadata file. Each image file is provided as a GeoTiff with internal tiling and LZW compression. These data can also be found on Google Earth Engine for extraction, download, and analysis of smaller extents (Google Earth Engine data is linked in external link table).

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2022

(U) SENSMG: First-Order Sensitivities of Neutron Reaction Rates, Reaction-Rate Ratios, Leakage, k eff , α , and Subcritical Multiplication Using PARTISN

SENSMG is a tool for computing first-order sensitivities of neutron reaction rates, reaction-rate ratios, leakage, k eff , α, and subcritical multiplication using the PARTISN multigroup discrete-ordinates code. SENSMG computes sensitivities to all of the transport cross sections and data (total, fission, a nu, chi, and all scattering moments), two edit cross sections (absorption and capture), and the density for every nuclide and energy group. It also computes sensitivities to the mass density for every material and derivatives with respect to all interface locations and outer boundaries. It computes sensitivities to user specified reactions whose cross sections are available in a user-supplied NJOY output file. The tool can be used for one-dimensional spherical and slab (r) and two-dimensional cylindrical (r-z) geometries. The tool can be used for fixed-source and eigenvalue problems. For most responses, the tool implements Generalized Perturbation Theory (GPT) as discussed by Williams and Stacey. The tool is thus limited to computing sensitivities only for GPT-allowable responses. For subcritical multiplication, the tool implements sensitivities derived by O’Brien and Clark. SENSMG has a similar role as the old SWANLAKE (Ref. 8), FORSS (Ref. 9), and SENSIT (Ref. 10) codes. It has capabilities similar to those of SUSD3D (Refs. 11 and 12), which also uses PARTISN. Section II of this report describes the theory behind adjoint-based sensitivities, gives the equations that SENSMG solves, and defines the sensitivities that are output. Section III describes the user interface, including the input file and command line options. Section IV describes the output. Section V gives some notes about the coding that may be of interest. Section VI presents some sample problems and discusses verification, which is ongoing. Section VII lists needs and ideas for future work. Appendix A lists most of the input files whose results are presented in Sec. VI. Appendix B provides some useful details on one of the cross-section libraries that SENSMG supports.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Rays for Roots - Integrating Backscatter X-Ray Phenotyping, Modeling and Genetics to Increase Carbon Sequestration and Switchgrass Resource Use (Final Report)

To increase carbon (C) deposition in the soil and enhance crop resource use efficiency, characterizing root form and function is essential. Several root and soil traits have been linked to increased root-to-soil C transfer. Technology that could provide high-resolution characterization of many of these traits in field conditions would revolutionize our ability to study and understand how to increase C sequestration. In this effort, we developed an initial early prototype backscatter X-ray system for non-destructive imaging of root traits. We collected initial backscatter X-ray data in field and lab settings and carried out early analysis of these data. Along with this prototype, we also developed a suite of root phenotyping approaches including advanced minirhizotron image analysis, soil core imaging, and mesocosm imaging. Minirhizotron (MR) tubes are clear tubes inserted into the soil in the field and used to image roots and the surrounding soil. Our team has developed deep learning-based methods that can segment roots from soil that can learn from imprecise image-level labels. The ability to learn or fine-tune our deep learning algorithms from image-level labels allows easier and faster application of these approaches to new locations and new plant species. We have successfully implemented and applied our MR analysis approaches to thousands of switchgrass MR images collected across geographical regions. An advantage of MR imaging is the ability to collect root and soil images over time. Our soil core analysis included collecting hundreds of soil core samples from harvested switchgrass fields and imaging these cores with both X-ray CT and backscatter X-ray imaging. Initial segmentation approaches for the X-ray CT images of these cores have been developed and applied. An advantage of soil core analysis is that it preserves the three-dimensional structures of the roots and soil in the core collected. Our group also developed photogrammetry-based mesocosm root imaging and phenotyping approaches. In this approach, a plant was grown in a large mesocosm with a three-dimensional grid of thin supporting lines inserted throughout the mesocosm. After the plant (and, correspondingly, the root architecture is grown and established) the soil media was removed and the supporting lines approximately preserved the three-dimensional root architecture. Then, we applied photogrammetry techniques to create a three-dimensional digital representation of the root architecture for which we developed analysis algorithms including skeletonization. We carried out our phenotyping development with powerful switchgrass resources and physiological and agroecosystem modeling to deliver novel technology. This project contributes to multiple ARPA-E missions including reduction of foreign imports of energy, reduction of energy-related emissions including greenhouse gases, and ensuring that the United States maintains a technological lead in developing and deploying advanced energy technology. Furthermore, the developed tools could transform public and private plant breeding and could be broadly applicable to other crops and, potentially, other application areas. Our team of engineers, plant and soil scientists, and modelers i) developed an early prototype backscatter X-ray platform that can operate in field conditions; ii) developed a suite of root phenotyping and characterization approaches as described above; iii) developed and carried out plant biology and physiology roots studies and; iv) developed and implemented mechanistic physiological modeling.

42 ENGINEERING↗
DOE OSTI2023

LLNS Request for Permanent Variance from 10 CFR 851 for Construction

Lawrence Livermore National Security, LLC (LLNS) requests variance from 10 CFR 851 (the Rule) for construction work at Lawrence Livermore National Laboratory (LLNL). The request is based upon successful application of similar variances granted to LLNS in continued support of the National Nuclear Security Administration (NNSA) initiative to streamline the delivery of line-item construction projects under $50 million. This request is aligned with the approved NA 50 safety approach. Experience gained in the construction of the new LLNL Emergency Operations Center (EOC) under the variance granted in June 2020 and construction preparations to date on the Digital Infrastructure Capabilities Expansion (DICE) under the variance granted April 2022 is very encouraging. There are strong indicators that a benefit has been realized by both the subcontractors executing the work and the Laboratory. The variance has permitted local/regional construction businesses contracted to Management & Operation Contractor operated facilities and lower tier subcontractors to bid, operate, execute, and comply with safety and health standards they utilize in their business outside of the Department of Energy (DOE) Complex. While compliance to standards that are as safe and healthful as those in 10 CFR 851: confusion, additional cost, and inefficiencies associated with the burden of compliance to an unfamiliar regulatory spectrum has been avoided. Safety and health performance on the construction project including the number of inspection and surveillance issues is comparable to other subcontractors and projects at LLNL executed under 10 CFR 851. This variance application was prepared according to the requirements in 10 CFR 851, Subpart D – Variances, § 851.31 Variance Process. This request is limited to subcontractor executed construction at LLNL.

42 ENGINEERING↗
DOE OSTI2023

Bottleneck Detection in Modular Construction Factories Using Computer Vision

The construction industry is increasingly adopting off-site and modular construction methods due to the advantages offered in terms of safety, quality, and productivity for construction projects. Despite the advantages promised by this method of construction, modular construction factories still rely on manually-intensive work, which can lead to highly variable cycle times. As a result, these factories experience bottlenecks in production that can reduce productivity and cause delays to modular integrated construction projects. To remedy this effect, computer vision-based methods have been proposed to monitor the progress of work in modular construction factories. However, these methods fail to account for changes in the appearance of the modular units during production, they are difficult to adapt to other stations and factories, and they require a significant amount of annotation effort. Due to these drawbacks, this paper proposes a computer vision-based progress monitoring method that is easy to adapt to different stations and factories and relies only on two image annotations per station. In doing so, the Scale-invariant feature transform (SIFT) method is used to identify the presence of modular units at workstations, and the Mask R-CNN deep learning-based method is used to identify active workstations. This information was synthesized using a near real-time data-driven bottleneck identification method suited for assembly lines in modular construction factories. This framework was successfully validated using 420 h of surveillance videos of a production line in a modular construction factory in the U.S., providing 96% accuracy in identifying the occupancy of the workstations and an F-1 Score of 89% in identifying the state of each station on the production line. The extracted active and inactive durations were successfully used via a data-driven bottleneck detection method to detect bottleneck stations inside a modular construction factory. The implementation of this method in factories can lead to continuous and comprehensive monitoring of the production line and prevent delays by timely identification of bottlenecks.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Marine ice sheet experiments with the Community Ice Sheet Model

Ice sheet models differ in their numerical treatment of dynamical processes. Simulations of marine-based ice are sensitive to the choice of Stokes flow approximation and basal friction law and to the treatment of stresses and melt rates near the grounding line. We study the effects of these numerical choices on marine ice sheet dynamics in the Community Ice Sheet Model (CISM). In the framework of the Marine Ice Sheet Model Intercomparison Project 3d (MISMIP3d), we show that a depth-integrated, higher-order solver gives results similar to a 3D (Blatter–Pattyn) solver. We confirm that using a grounding line parameterization to approximate stresses in the grounding zone leads to accurate representation of ice sheet flow with a resolution of ~2 km, as opposed to ~0.5 km without the parameterization. In the MISMIP+ experimental framework, we compare different treatments of sub-shelf melting near the grounding line. In contrast to recent studies arguing that melting should not be applied in partly grounded cells, it is usually beneficial in CISM simulations to apply some melting in these cells. This suggests that the optimal treatment of melting near the grounding line can depend on ice sheet geometry, forcing, or model numerics. In both experimental frameworks, ice flow is sensitive to the choice of basal friction law. To study this sensitivity, we evaluate friction laws that vary the connectivity between the basal hydrological system and the ocean near the grounding line. CISM yields accurate results in steady-state and perturbation experiments at a resolution of ~2 km (arguably 4 km) when the connectivity is low or moderate and ~1 km (arguably 2 km) when the connectivity is strong.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Channel Rank Improvement in Urban Drone Corridors Using Passive Intelligent Reflectors

Multiple-input multiple-output (MIMO) techniques can help in scaling the achievable air-to-ground (A2G) channel capacity while communicating with drones. However, spatial multiplexing with drones suffers from rank deficient channels due to the unobstructed line-of-sight (LoS), especially in millimeter wave (mmWave) frequencies that use narrow beams. One possible solution is utilizing low-cost and low-complexity metamaterial based intelligent reflecting surfaces (IRS) to enrich the multipath environment, taking into account that the drones are restricted to fly only within well-defined drone corridors. A hurdle with this solution is placing the IRSs optimally. In this study, we propose an approach for IRS placement with a goal to improve the spatial multiplexing gains, and hence to maximize the average channel capacity in a predefined drone corridor. Our results at 6 GHz, 28 GHz and 60 GHz show that the proposed approach increases the average rates for all frequency bands for a given drone corridor, when compared with the environment where there are no IRSs present, and IRS-aided channels perform close to each other at sub-6 and mmWave bands.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Decision Support Tool for Solar Energy Cybersecurity Policy and Regulation

The Decision Support Tool helps users address four discrete challenges: (1) complex requirements of relevant codes and standards, (2) technical complexity of solar assets, (3) undefined cyber risk severity, and (4) unclear roles and responsibilities. Content includes an analysis of cyber vulnerability risks, a decision support resource for policymakers to mitigate cyber risks to solar photovoltaic systems, and background resources for informing policy development. A key component of this tool is the Probable Risk Assessment (PRA), based on established, formal variables, models, and consequences, which helps users understand the determined risk and assigned ownership of the physical components. It helps states draw logical lines between vulnerabilities and mitigative solutions, of which some have been further detailed as Cybersecurity Advisory Team for State Solar (CATSS) tools.

14 SOLAR ENERGY↗
DOE OSTI2020

An On-Chip Superconducting Kinetic Inductance Fourier Transform Spectrometer for Millimeter-Wave Astronomy

An on-chip FTS consists of two waveguides coupled to long superconducting transmission lines (STLs) (similar to 620 mm) using two coupling probes. The signal propagating on one of the STLs is phase-shifted with respect to the other line with a bias current that affects the nonlinear dependence of kinetic inductance, Lk(I)of the STL material. Here we describe the design and simulation of a superconducting on-chip FTS coupled to a dual polarization W-band (90-110 GHz) waveguide. These devices have applications in ground-based and space-based millimeter-wave spectral surveys.

Fourier transform spectrometer↗
DOE OSTI2022

Deep modeling of plasma and neutral fluctuations from gas puff turbulence imaging

The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collisional radiative theory for the 3 3 D - 2 3 P transition in atomic helium with unbounded correlation constraints between the electron density and temperature. The tenets for experimental validity are reviewed, illustrating that this turbulence analysis for ionized gases is transferable to both magnetized and unmagnetized environments with arbitrary geometries. Based on fast camera data on the Alcator C-Mod tokamak, we present the first two-dimensional time-dependent experimental measurements of the turbulent electron density, electron temperature, and neutral density, revealing shadowing effects in a fusion plasma using a single spectral line.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Workshop on Establishing and Operating a National Nuclear Security Support Centre Hypothetical Scenario: "Republic of Centralia Nuclear Security Support Centre Feasibility Report"

[This is part of a hypothetical, scenario-based exercise for workshop participants, based on the fictitious country "Centralia."] This report serves as official record of the coordinated process completed by competent authorities and other organizations with nuclear security responsibilities in the Republic of Centralia to determine the feasibility of establishing and operating a national nuclear security support centre (NSSC). The report summarizes all sustainability needs and available resources identified during the feasibility determination process, including consideration of possible NSSC institutional models, in line with the systematic approach recommended by the International Atomic Energy Agency (IAEA). Centralia Nuclear Regulatory Authority (CNRA), as the designated lead organization for coordinating the feasibility determination process, has prepared this report in collaboration with members of the Committee on Nuclear Security (CNS) and based on input gathered among relevant national stakeholders. The report has been presented to the National Security Advisor (NSA), for final review and decision-making as to whether Centralia should proceed with establishing an NSSC.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

High-Efficiency, Medium-Voltage-Input, Solid-State-Transformer-Based 400-kW/1000V/400A Extreme Fast Charger for Electric Vehicles

Range anxiety and long battery charging time continue to be critical challenges to mass adaptation of EVs. A major identified gap to wider adoption of BEVs is the ability and availability to refuel quickly or to fast charge. Studies have shown that in areas where drivers have access to 50-kW or 120-kW fast charge stations, annual electric vehicle (EV) miles traveled (i.e., eVMT) increased by over 25%, even in cases where fast charging was used for 1% to 5% of total charging events. Charge stations of higher power not only alleviate the “range anxiety” and reduce the driver’s waiting time, but also requires less investment. Michigan Energy Office completed a study in early 2019 titled “Electric Vehicle Charger Placement Optimization in Michigan: Phase I – Highways”. This study finds a system with 150kW chargers, though more expensive individually, actually has lower total system cost when compared to a 50kW charging system when serving the same battery size EV. To be truly competitive to the ICEV refueling experience, even higher power stations are necessary. However, high power charge stations would create large power draws from the grid. If this occurs during peak demand periods, grid capacity could be overloaded. This problem needs to be addressed to reduce the impact on the electric utility infrastructure. The main goal of this project is to develop a 400-kW/400-A XFC system targeting total efficiency of 96.5 percent from the MVAC grid to a vehicle. The novel SST power cell topology, combined with a new silicon carbide (SiC) MOSFET device, enables a 3.5 percent improvement in system efficiency, a 50-percent smaller equipment footprint, and four times less weight than today’s DCFC systems. The SST technology would directly utilize MVAC at 4.8-kV or 13.2-kV. This would eliminate the line frequency transformer (LFT), which steps down medium-voltage AC to 3-Phase 480-V line-to-line voltage in current DCFC systems.

42 ENGINEERING↗
DOE OSTI2022

COMAP Early Science. V. Constraints and Forecasts at z ~ 3

We present the current state of models for the z ~ 3 carbon monoxide (CO) line intensity signal targeted by the CO Mapping Array Project (COMAP) Pathfinder in the context of its early science results. Our fiducial model, relating dark matter halo properties to CO luminosities, informs parameter priors with empirical models of the galaxy–halo connection and previous CO (1–0) observations. The Pathfinder early science data spanning wavenumbers k = 0.051–0.62 Mpc –1 represent the first direct 3D constraint on the clustering component of the CO (1–0) power spectrum. Our 95% upper limit on the redshift-space clustering amplitude A clust ≲ 70 μK 2 greatly improves on the indirect upper limit of 420 μK 2 reported from the CO Power Spectrum Survey (COPSS) measurement at k ~ 1 Mpc –1 . The COMAP limit excludes a subset of models from previous literature and constrains interpretation of the COPSS results, demonstrating the complementary nature of COMAP and interferometric CO surveys. Using line bias expectations from our priors, we also constrain the squared mean line intensity–bias product, ${\left\langle {Tb}\right\rangle }_{2}$ ≲ 50 μK 2 , and the cosmic molecular gas density, ρ H2 < 2.5 × 10 8 M ⊙ Mpc –3 (95% upper limits). Based on early instrument performance and our current CO signal estimates, we forecast that the 5 yr Pathfinder campaign will detect the CO power spectrum with overall signal-to-noise ratio of 9–17. Between then and now, we also expect to detect the CO–galaxy cross-spectrum using overlapping galaxy survey data, enabling enhanced inferences of cosmic star formation and galaxy evolution history.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Kinetic simulations of collision-less plasmas in open magnetic geometries

Laboratory plasmas in open magnetic geometries can be found in many different applications such as (a) scrape-of-layer (SOL) and divertor regions in toroidal confinement fusion devices, (b) linear divertor simulators, (c) plasma-based thrusters and (d) magnetic mirrors etc. A common feature of these plasma systems is the need to resolve, in addition to velocity space, at least one physical dimension (e.g. along flux lines) to capture the relevant physics. In general, this requires a kinetic treatment. Fully kinetic particle-in-cell (PIC) simulations can be applied but at the expense of large computational effort. A common way to resolve this is to use a hybrid approach: kinetic ions and fluid electrons. In the present work, the development of a hybrid PIC computational tool suitable for open magnetic geometries is described which includes (a) the effect of non-uniform magnetic fields, (b) finite fully-absorbing boundaries for the particles and (c) volumetric particle sources. Analytical expressions for the momentum transport in the paraxial limit are presented with their underlying assumptions and are used to validate the results from the PIC simulations. A general method is described to construct discrete particle distribution functions in a state of mirror-equilibrium. This method is used to obtain the initial state for the PIC simulation. Collisionless simulations in a mirror geometry are performed. The results show that the effect of magnetic compression is correctly described and momentum is conserved. The self-consistent electric field is calculated and is shown to modify the ion velocity distribution function in a manner consistent with analytic theory. Based on this analysis, the ion distribution function is understood in terms of a loss-cone distribution and an isotropic Maxwell-Boltzmann distribution driven by a volumetric plasma source. Finally, the inclusion of a Monte Carlo based Fokker-Planck collision operator is discussed in the context of future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗