Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Asphericity Can Cause Nonuniform Lithium Intercalation in Battery Active Particles

Uniform intercalation is desired to enable next-generation Li-ion batteries. While we expect nonuniformity in materials undergoing a phase change, single-phase intercalation materials such as nickel manganese cobalt oxide are believed to lithiate uniformly at the particle/electrolyte interface. However, recent imaging reveals nonuniform lithiation. Motivated by this discrepancy, we examine if aspherical particle shape can cause such nonuniformity since the conventional belief is based on spherical particle theory. We obtain real particle geometries using rapid lab-based X-ray computed tomography and subsequently perform physics-based calculations accounting for electrochemical reactions at the particle/electrolyte interface and lithium transport inside the particle bulk. The aspherical geometry breaks the symmetry and causes nonuniform reaction distribution. Such nonuniformity is exacerbated as the particle becomes more aspherical. We report the proposed mechanism represents a fundamental limit on achievable lithiation uniformity in aspherical particles in the absence of other mechanisms causing inhomogeneity, such as grain structure, nonuniform carbon-binder coating, etc.

25 ENERGY STORAGE↗

Waste PET Chemical Processing to Terephthalic Amides and Their Effect on Asphalt Performance

The large amount of waste generated from polyethylene terephthalate (PET) packaging materials that have reached the end of life is creating a waste management issue that cannot be handled by mechanical recycling alone. Thus, it is imperative that alternate routes to recover and reuse these materials be pursued. A chemical recycling approach of mixed PET was demonstrated here that provides a mechanism by which PET waste can be efficiently recovered and repurposed to value-added products. The approach utilizes aminolysis of PET with a variety of amine nucleophiles, generating a small library of phthalimides with unique structures. In order to probe the high value of these products, the phthalimides were added to road-grade asphalt binder at 5 wt% and the resulting composite was evaluated. Specifically, rutting and fatigue characteristics as well as thermomechanical and creep performance were characterized and found to be improved by the inclusion of these additives by as much as 18%. In this work, additives made from deconstructed PET wastes were shown to improve the performance properties of asphalt at a variety of environmental conditions. These improvements would reduce the cost of road maintenance and provide a high-value market for waste PET. It is important to note that the asphalt binder utilized in this work was a commercial product already optimized for road conditions, not the raw bitumen; perhaps higher performance metrics could be obtained with virgin bitumen.

Recycling, Asphalt↗

Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent

Effective separation of cathode materials and current collectors is one of the most enabling steps, yet a very challenging step, in recycling electrode scraps and spent Li-ion cells. Here, a green solvent, triethyl phosphate, was used to recover invaluable cobalt-containing cathodes, such as NMC622, by dissolving the polymeric binder of poly(vinylidene fluoride). Electrochemically active materials were separated from cathode scraps collected at the manufacturing step of electrodes through a solvent-based separation method without jeopardizing their physical characteristics, crystalline structure, and electrochemical performance. In this work, we found that the recovered aluminum foils were clean without any sign of corrosion and that the polymeric binder could be recovered via a non-solvent-induced phase separation. Additionally, recovery of cathode materials from spent cells was achieved using refined separation parameters based on the recycling of cathode scraps. It is anticipated that this green solvent-based separation for cathode recovery will attract significant interest by the lithium-ion battery manufacturing and recycling communities.

25 ENERGY STORAGE↗

Integrated Ion-Exchange Membrane Resin Wafer Assemblies for Aromatic Organic Acid Separations Using Electrodeionization

Aromatic acids, such as p-coumaric acid, are valuable chemical intermediates that are used in the specialty chemical industries because they are precursors to phenylpropanoid compounds. The separation of p-coumaric acid from fermentation broths is a critical step in the biochemical production process and more broadly the circular carbon economy. Electrodeionization (EDI) has been applied toward separations of low-carbon chain acids, but purifying p-coumaric acid has been challenging due to fouling and irreversible binding with ion-exchange membranes and resins. Here, we report a new membrane wafer assembly (MWA) consisting of laminated ion exchange membranes to porous ionomer-binder resin wafers for EDI. The MWAs in an EDI stack showed a 7-fold increase in p-coumaric acid capture while also using 70% less specific energy consumption when benchmarked against state-of-the-art resin wafer EDI modules. The more efficient p-coumaric acid recovery was ascribed to (i) the 38% reduction in interfacial transport resistance between the membrane and resin wafer and (ii) using imidazolium anion exchange membranes and ionomer binders in the MWA. MD simulations revealed enhanced transport rates for p-coumarate in imidazolium ionomers through π–π interactions. As a result, adopting the new MWA significantly reduced the amount of ion-exchange membranes in EDI and may lead to drastic capital cost savings.

42 ENGINEERING↗

Feasibility of Algal Biochar, a Byproduct of Biofuel Production, as a Supplemental Cementitious Material

Algal biochar, as the solid residue of biofuel production from algal biomass, is reported to explore disposition options, aiming to lessen the liability or obstacles to biofuel production processes. However, landfills and open combustion lead to adverse environmental impacts. One way to add value to such wastes is to use them as admixtures in cementitious construction materials. This study aims to investigate the feasibility of algae-derived biochar as supplementary cementitious materials (SCM) at different water contents and mixture ratios. Algal biochar-cement composites were prepared with different algal biochar content as well as different water-to-cement (w/c) ratios, and the surface area, morphology, elemental, and mineralogical composition were characterized. To compensate for the high-water absorption of algal biochar, a small concentration of a superplasticizer was used since higher w/c ratios negatively impact strength. The mechanical performance of algal biochar-cement composites is compared with control composites using commercial silica fume as a typical commercial SCM. The findings suggest that algal biochar is a promising candidate to replace commercial SCM, like silica fume, since algal biochar-cement composites can reach comparable compressive strength and Young’s modulus to commercial pozzolan-cement materials with the same w/c ratio, though at later curing times, 33 days. Although the tensile strength of algal biochar-cement composites is statistically similar at 7 days, it is significantly lower at later curing times, and further investigation is required to improve this property. Algal biochar-based cement binders showed comparable embodied carbon to silica fume-based cement binders based on a cradle-to-gate lifecycle analysis. However, the ability of algal biochar to absorb large volumes of CO 2 over short periods of time, as measured in this study, makes this novel SCM an excellent alternative to reduce the embodied carbon of concrete structures cradle-to-grave at 1/10 of the cost. In conclusion, valorization of algae-derived solid waste provides great potential to reduce embodied carbon and brings credit to biofuel production and concrete-based construction.

algae-derived↗

Toward Environmentally Friendly Lithium Sulfur Batteries: Probing the Role of Electrode Design in MoS 2 -Containing Li–S Batteries with a Green Electrolyte

While lithium sulfur batteries (Li–S) hold promise as future high energy density low cost energy storage systems, barriers to implementation include low sulfur loading, limited cycle life, and the use of toxic electrolyte solvents. A comprehensive study of Li–S cells in the environmentally benign di(propylene glycol) dimethyl ether (DPGDME)-based electrolyte, using as-prepared MoS 2 nanosheets derived from a facile aqueous microwave synthesis as polysulfide trapping agents, is reported herein for the first time. Conventional coated foil electrodes and binder-free electrodes (BFEs) with various structures are systematically generated and tested to correlate electrode design with the resulting electrochemical behavior. Significantly improved Li–S electrochemistry is demonstrated through the synergy of MoS 2 chemistry and binder-free electrode engineering. In the coating configuration, the MoS 2 -containing cell evinced better rate performance and more stable cyclability than the cell without MoS 2 . In comparison with the coating counterparts, the BFE cells exhibited excellent cycle stability and superior rate capability (10-fold capacities and energy density per electrode weight with 20% higher retention rate) despite 2X higher areal sulfur loading. As a result, the BFE cell improvement can be attributed to the synergistic effect of the i) interconnected macroporous structure of CNT interlayers, providing a conductive framework, and ii) the efficient polysulfide trapping by the MoS 2 nanosheets.

25 ENERGY STORAGE↗

How Microstructure and Pore Moisture Affect Strength Gain in Portlandite-Enriched Composites That Mineralize CO 2

Binders containing portlandite (Ca(OH) 2 ) can take up carbon dioxide (CO 2 ) from dilute flue gas streams (<15% CO 2 , v/v), thereby forming carbonate compounds with binding attributes. While the carbonation of portlandite particulates is straightforward, it remains unclear how CO 2 transport into monoliths is affected by microstructure and pore moisture content. Therefore, this study elucidates the influences of pore saturation and CO 2 diffusivity on the carbonation kinetics and strength evolution of portlanditeenriched composites (“mortars”). To assess the influences of microstructure, composites hydrated to different extents and conditioned to different pore saturation levels (S w ) were exposed to dilute CO 2 . First, reducing saturation increases the gas diffusivity and carbonation kinetics so long as saturation exceeds a critical value (S w,c ≈ 0.10) independent of microstructural attributes. Second, careful analysis reveals that both traditional cement hydration and carbonation offer similar levels of strengthening, the magnitude of which can be estimated from the extent of each reaction. As a result, portlandite-enriched binders offer cementation performance that is similar to traditional materials while offering an embodied CO 2 footprint that is more than 50 % smaller. Furthermore, these insights are foundational to create new “low-CO 2 ” cementation agents via in situ CO 2 mineralization (utilization) using dilute CO 2 waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗

Freestanding three-dimensional core–shell nanoarrays for lithium-ion battery anodes

Here, structural degradation and low conductivity of transition-metal oxides lead to severe capacity fading in lithium-ion batteries. Recent efforts to solve this issue have mainly focused on using nanocomposites or hybrids by integrating nanosized metal oxides with conducting additives. Here we design specific hierarchical structures and demonstrate their use in flexible, large-area anode assemblies. Fabrication of these anodes is achieved via oxidative growth of copper oxide nanowires onto copper substrates followed by radio-frequency sputtering of carbon-nitride films, forming freestanding three-dimensional arrays with core–shell nano-architecture. Cable-like copper oxide/carbon-nitride core–shell nanostructures accommodate the volume change during lithiation-delithiation processes, the three-dimensional arrays provide abundant electroactive zones and electron/ion transport paths, and the monolithic sandwich-type configuration without additional binders or conductive agents improves energy/power densities of the whole electrode.

25 ENERGY STORAGE↗

Development of light-responsive protein binding in the monobody non-immunoglobulin scaffold

Abstract Monobodies are synthetic non-immunoglobulin customizable protein binders invaluable to basic and applied research, and of considerable potential as future therapeutics and diagnostic tools. The ability to reversibly control their binding activity to their targets on demand would significantly expand their applications in biotechnology, medicine, and research. Here we present, as proof-of-principle, the development of a light-controlled monobody (OptoMB) that works in vitro and in cells and whose affinity for its SH2-domain target exhibits a 330-fold shift in binding affinity upon illumination. We demonstrate that our αSH2-OptoMB can be used to purify SH2-tagged proteins directly from crude E. coli extract, achieving 99.8% purity and over 40% yield in a single purification step. By virtue of their ability to be designed to bind any protein of interest, OptoMBs have the potential to find new powerful applications as light-switchable binders of untagged proteins with the temporal and spatial precision afforded by light.

59 BASIC BIOLOGICAL SCIENCES↗

Deep learning-based segmentation of lithium-ion battery microstructures enhanced by artificially generated electrodes

Accurate 3D representations of lithium-ion battery electrodes, in which the active particles, binder and pore phases are distinguished and labeled, can assist in understanding and ultimately improving battery performance. Here, we demonstrate a methodology for using deep-learning tools to achieve reliable segmentations of volumetric images of electrodes on which standard segmentation approaches fail due to insufficient contrast. We implement the 3D U-Net architecture for segmentation, and, to overcome the limitations of training data obtained experimentally through imaging, we show how synthetic learning data, consisting of realistic artificial electrode structures and their tomographic reconstructions, can be generated and used to enhance network performance. We apply our method to segment x-ray tomographic microscopy images of graphite-silicon composite electrodes and show it is accurate across standard metrics. We then apply it to obtain a statistically meaningful analysis of the microstructural evolution of the carbon-black and binder domain during battery operation.

25 ENERGY STORAGE↗

Design of amyloidogenic peptide traps

Segments of proteins with high β-strand propensity can self-associate to form amyloid fibrils implicated in many diseases. We describe a general approach to bind such segments in β-strand and β-hairpin conformations using de novo designed scaffolds that contain deep peptide-binding clefts. The designs bind their cognate peptides in vitro with nanomolar affinities. The crystal structure of a designed protein–peptide complex is close to the design model, and NMR characterization reveals how the peptide-binding cleft is protected in the apo state. We use the approach to design binders to the amyloid-forming proteins transthyretin, tau, serum amyloid A1 and amyloid β 1–42 (Aβ42). The Aβ binders block the assembly of Aβ fibrils as effectively as the most potent of the clinically tested antibodies to date and protect cells from toxic Aβ42 species.

59 BASIC BIOLOGICAL SCIENCES↗

Design and applications of a clamp for Green Fluorescent Protein with picomolar affinity

Green fluorescent protein (GFP) fusions are pervasively used to study structures and processes. Specific GFP-binders are thus of great utility for detection, immobilization or manipulation of GFP-fused molecules. We determined structures of two designed ankyrin repeat proteins (DARPins), complexed with GFP, which revealed different but overlapping epitopes. Here in this paper we show a structure-guided design strategy that, by truncation and computational reengineering, led to a stable construct where both can bind simultaneously: by linkage of the two binders, fusion constructs were obtained that “wrap around” GFP, have very high affinities of about 10–30 pM, and extremely slow off-rates. They can be natively produced in E. coli in very large amounts, and show excellent biophysical properties. Their very high stability and affinity, facile site-directed functionalization at introduced unique lysines or cysteines facilitate many applications. As examples, we present them as tight yet reversible immobilization reagents for surface plasmon resonance, as fluorescently labelled monomeric detection reagents in flow cytometry, as pull-down ligands to selectively enrich GFP fusion proteins from cell extracts, and as affinity column ligands for inexpensive large-scale protein purification. We have thus described a general design strategy to create a “clamp” from two different high-affinity repeat proteins, even if their epitopes overlap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flexible and High Performance Supercapacitors Based on NiCo2O4for Wide Temperature Range Applications

Binder free nanostructured NiCo 2 O 4 were grown using a facile hydrothermal technique. X-ray diffraction patterns confirmed the phase purity of NiCo 2 O 4 . The surface morphology and microstructure of the NiCo 2 O 4 analyzed by scanning electron microscopy (SEM) showed flower-like morphology composed of needle-like structures. The potential application of binder free NiCo 2 O 4 as an electrode for supercapacitor devices was investigated using electrochemical methods. The cyclic voltammograms of NiCo2O4 electrode using alkaline aqueous electrolytes showed the presence of redox peaks suggesting pseudocapacitance behavior. Quasi-solid state supercapacitor device fabricated by sandwiching two NiCo 2 O 4 electrodes and separating them by ion transporting layer. The performance of the device was tested using cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. The device showed excellent flexibility and cyclic stability. The temperature dependent charge storage capacity was measured for their variable temperature applications. Specific capacitance of the device was enhanced by ~150% on raising the temperature from 20 to 60°C. Hence, the results suggest that NiCo 2 O 4 grown under these conditions could be a suitable material for high performance supercapacitor devices that can be operated at variable temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cellulose nanocrystal-based composite electrolyte with superior dimensional stability for alkaline fuel cell membranes

Cellulose nanocrystal (CNC)-based composite films were prepared as a solid electrolyte for alkaline fuel cells. Poly (vinyl alcohol) (PVA) and silica gel hybrid was used to bind the CNCs to form a robust composite film. The mass ratio (i.e., 1 : 1, 1 : 2) of PVA and silica gel was tuned to control the hydrophobicity of the resulting films. Composite films with a range of CNC content (i.e., 20 to 60%) were prepared to demonstrate the impact of CNC on the performance of these materials as a solid electrolyte for alkaline fuel cells. Different from previously reported cross-linked polymer films, CNC-based composite films with 40% hydrophobic binder (i.e., PVA : silica gel=1 : 2) exhibited simultaneous low water swelling (e.g., ~5%) and high water uptake (e.g., ~80%) due to the hydrophilicity and extraordinary dimensional stability of CNC. It also showed a conductivity of 0.044 and 0.065 S/cm at 20 and 60 oC, respectively. To the best of our knowledge, the film with 60% CNC and 40% binder is characterized by the lowest hydroxide conductivity-normalized swelling ratio. Decreased CNC content (i.e., 40 and 20%) resulted in comparable hydroxide conductivity but a greater swelling ratio. Finally, these results demonstrate the advantage of CNC as a key component for a solid electrolyte for alkaline fuel cells over conventional polymers, suggesting the great potential of CNCs in improving the dimensional stability while maintaining the conductivity of existing anion exchange membranes.

36 MATERIALS SCIENCE↗

High capacity vanadium oxide electrodes: effective recycling through thermal treatment

This study demonstrates that thermal regeneration is an effective approach to convert degraded phases to functioning electroactive materials, restore functional delivered capacity and recover material crystallinity while retaining the integrity of the parent electrode. V 2 O 5 nanowires were synthesized through a facile hydrothermal method and used to fabricate V 2 O 5 /carbon nanotube (CNT) binder free electrodes. Discharge of the V 2 O 5 –CNT electrodes coupled with operando energy dispersive X-ray diffraction shows no evidence of phase segregation throughout the 150 μm thick binder free electrodes indicating full utilization of a thick electrode. When V 2 O 5 is highly electrochemically lithiated (x > 2 in LixV 2 O 5 ), irreversible phase transformation to ω-LixV 2 O 5 was observed, accompanied by a capacity decrease of ~40% over 100 cycles. A simple thermal treatment of the entire electrode results in a delivered capacity equal to or higher than the original value. Both phase conversion and an increase in material crystallinity as a result of thermal treatment are observed where structural analysis indicates the formation of Li 1 V 3 O 8 . The electrode design approach with thick electrodes and functional thermal regeneration may provide a broader choice of electroactive materials through decreasing the environmental burden by extending the lifetime of energy storage systems.

25 ENERGY STORAGE↗

Adsorption and exchange reactions of iodine molecules at the alumina surface: modelling alumina-iodine reaction mechanisms

Harnessing aluminum oxidation energy requires navigating the particle's passivation shell composed of alumina. The shell is a barrier to aluminum oxidation but can also exothermically react with halogenated species and therefore contribute to the overall energy generated during aluminum particle combustion. Fluorination reactions with alumina have been studied because fluorine is abundant in binder formulations that commonly surround aluminum particles in an energetic mixture. However, iodine has emerged as an alternative halogenated-based binder or oxidizer because iodine gas provides ancillary benefits such as chemical neutralization of biological agents or sterilization of contaminated environments. Furthermore, this study used density functional theory (DFT) calculations to evaluate potential reaction pathways for aluminum–iodine combustion. Relative to fluorinated fragments such as HF and F – , the adsorption energies associated with HI and I– are nearly triple the exchange reaction energy available from fluorination reactions with alumina (–189 and –278 kJ mol –1 for HI and I – , respectively). However, exchange reactions between iodinated species and the alumina surface are energetically unfavorable. These results explain that through adsorption, alumina surface exothermic reactions with iodine are more energetic than with fluorine fragments. Experiments performed with differential scanning calorimetry (DSC) confirm the higher magnitude of energy generated for iodination compared with fluorination reactions with alumina. Additionally, strong adsorption energies can promote synthesis of new shell chemistries. Adsorption in solution will promote alumina dissolution and iodine precipitation reactions to produce hydroxyl complexes and iodinated species synthesized on the surface of the particle, thereby replacing alumina with alternative passivation shell chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗