Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BERYLLIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

First-principles study of electronic states in Mg{sub 2}C

The electronic properties of magnesium methanide Mg{sub 2}C are reported. Investigations are carried out applying the linear combination of atomic orbitals method. After settling ground state of the antifluorite structure the electronic band structure calculations are undertaken using PBE-GGA exchange and correlation functional and PBE0 hybrid functional. All calculations show that Mg{sub 2}C has indirect band gap with conduction band minimum at Γ and valence band maximum at the X point. The values of band gap from PBE and the PBE0 are 2.05 and 3.46 eV respectively. In comparison to beryllium methanide the electronic bands are flat suggesting ionic nature of bonding.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Alternating current calorimeter for specific heat capacity measurements at temperatures below 10 K and pressures up to 10 GPa

A developed alternating current calorimeter for measuring the absolute value of specific heat C of a very small sample under a pressure up to 10 GPa and low temperature below 10 K is described. A Bridgman anvil cell made of tungsten carbide with a top diameter of 3 mm is used. A hollow at the top prevents expansion of the sample space over the anvil top. Two chip resistors, which act as a thermometer and a heater, are mounted on the outer part of a copper–beryllium gasket with a frying pan-like shape. Thus, the thermometer is not pressurized. In order to isolate the gasket from the anvil thermally, diamond powder with a grain size of 0.25 μm is placed on the anvil top. Two jumps of C at the superconducting transitions of Pb (3.3 mg) and In (5.0 mg) are observed under various pressures up to 9 GPa, as clearly as those at the ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A visualization instrument to investigate the mechanical-electro properties of high temperature superconducting tapes under multi-fields

We construct a visible instrument to study the mechanical-electro behaviors of high temperature superconducting tape as a function of magnetic field, strain, and temperature. This apparatus is directly cooled by a commercial Gifford-McMahon cryocooler. The minimum temperature of sample can be 8.75 K. A proportion integration differentiation temperature control is used, which is capable of producing continuous variation of specimen temperature from 8.75 K to 300 K with an optional temperature sweep rate. We use an external loading device to stretch the superconducting tape quasi-statically with the maximum tension strain of 20%. A superconducting magnet manufactured by the NbTi strand is applied to provide magnetic field up to 5 T with a homogeneous range of 110 mm. The maximum fluctuation of the magnetic field is less than 1%. We design a kind of superconducting lead composed of YBa2Cu3O7-x coated conductor and beryllium copper alloy (BeCu) to transfer DC to the superconducting sample with the maximum value of 600 A. Most notably, this apparatus allows in situ observation of the electromagnetic property of superconducting tape using the classical magnetic-optical imaging.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Novel high-pressure windows made of glass-like carbon for x-ray analysis

Original high-pressure glass-like carbon windows developed for x-ray spectroscopy applications are presented. The scientific and technological background of this new technical development is exposed, in particular the limitations of our existing beryllium windows in the context of x-ray absorption spectroscopy (XAS) measurements of solutions with very low solute concentrations at hydrothermal conditions (0.1-200 MPa, 30-600 °C). The benefits of glass-like carbon are exposed, notably its non-crystalline character, the absence of impurities which has been verified by micro-fluorescence laboratory measurements, and its non-toxicity which makes its machining safer. Finite elements mechanical calculations and experimental pressure tests were conducted to determine the pressure limits of windows with two different geometries: cylindrical (thickness 0.5 mm) and inversed-dome shape (thickness 0.5 mm at the tip of the dome). The former break at 150 MPa and the latter show no sign of rupture at 400 MPa. Recent XAS measurements conducted with the new dome shaped windows are presented to show the advantages of the design that allow for the detection of very low concentrations in the transmission mode (down to 30 ppm) and the acquisition of fluorescence XAS spectra in diluted solutions at high pressure. Eventually the perspectives of this original development are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In-vessel calibration of the imaging diagnostics for the real-time protection of the JET ITER-like wall

The in situ absolute calibration of the JET real-time protection imaging system has been performed for the first time by means of radiometric light source placed inside the JET vessel and operated by remote handling. High accuracy of the calibration is confirmed by cross-validation of the near infrared (NIR) cameras against each other, with thermal IR cameras, and with the beryllium evaporator, which lead to successful protection of the JET first wall during the last campaign. The operation temperature ranges of NIR protection cameras for the materials used on JET are Be 650-1600 °C, W coating 600-1320 °C, and W 650-1500 °C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of compression of indirect-drive targets under conditions of the NIF facility using one-dimensional modelling

The indirect compression dynamics of targets containing capsules with ablators of a plastic, high-density carbon and beryllium is simulated in the framework of a one-dimensional model based on the 1D RADIAN code. Experiments with such targets are performed on the NIF facility in the Livermore Laboratory (USA) in 2014 – 2018. The 1D simulation data are consistent with the results of experiments and calculations made at this Laboratory. The effect of the hard part of hohlraum radiation on capsule compression parameters is confirmed. We demonstrate the feasibility of eliminating this influence not only by selecting the hohlraum material but also by introducing admixtures into the capsule that absorb this radiation. It is shown how varying the amount of admixture in the capsule ablator varies the spectrum of the radiation that heats the DT fuel. (interaction of laser radiation with matter. laser plasma)

36 MATERIALS SCIENCE↗

A Phosphoenzyme Mimic, Overlapping Catalytic Sites and Reaction Coordinate Motion for Human NAMPT

Nicotinamide phosphoribosyltransferase (NAMPT) is highly evolved to capture nicotinamide (NAM) and replenish the nicotinamide adenine dinucleotide (NAD+) pool during ADP-ribosylation and transferase reactions. ATP-phosphorylation of an active-site histidine causes catalytic activation, increasing NAM affinity by 160,000. Crystal structures of NAMPT with catalytic site ligands identify the phosphorylation site, establish its role in catalysis, demonstrate unique overlapping ATP and phosphoribosyltransferase sites, and establish reaction coordinate motion. NAMPT structures with beryllium fluoride indicate a covalent H247-BeF3- as the phosphohistidine mimic. Activation of NAMPT by H247-phosphorylation causes stabilization of the enzyme-phosphoribosylpyrophosphate complex, permitting efficient capture of NAM. Reactant and product structures establish reaction coordinate motion for NAMPT to be migration of the ribosyl anomeric carbon from the pyrophosphate leaving group to the nicotinamide-N1 while the 5-phosphoryl group, the pyrophosphate moiety, and the nicotinamide ring remain fixed in the catalytic site.

36 MATERIALS SCIENCE↗

Advanced High-Temperature Sodium-Cooled Thermal Reactors Using Less Than 10% Enriched UO 2 Fuel

Here, this paper presents a 1200-MW(thermal) advanced sodium-cooled thermal reactor concept that uses online refueling of 3.5% to 9.95% enriched UO2 fuel pin bundles; uses either graphite or beryllium oxide (BeO) as a neutron moderator; reaches outlet temperatures of 650°C enabling a thermal efficiency of at least 45%; has a high specific power of 133 W/g U; has average power densities of 16.4 and 43.2 W/cm 3 with graphite and BeO, respectively; reaches an average discharge burnup of 100 MWd/kg U; and generates 52% less spent fuel volume, 28% less fission products, and 47% to 64% less transuranics than a typical large pressurized water reactor for the same amount of electricity produced.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

THE SOLAR HEAVY ELEMENT ABUNDANCES. II. CONSTRAINTS FROM STELLAR ATMOSPHERES

Estimates of the bulk metal abundance of the Sun derived from the latest generation of model atmospheres are significantly lower than the earlier standard values. In Paper I, we demonstrated that helioseismic data combined with stellar interiors theory set strong bounds on the solar metal abundance. The seismically derived abundances are inconsistent with the low photospheric abundances if the quoted errors in the atmospheric models (of order 0.05 dex) are correct. In this paper, we undertake a critical analysis of the solar metallicity and its uncertainty from a model atmospheric perspective, focusing on CNO. We argue that the non-LTE (NLTE) corrections for abundances derived from atomic features are overestimated in the recent abundance studies, while systematic errors in the absolute abundances are underestimated. In general, abundances derived from molecular features are lower than those derived from atomic features for the three-dimensional hydro models, while a weaker trend in the opposite direction tends to hold for abundances derived from one-dimensional models. If we adopt the internal consistency between different indicators as a measure of goodness of fit, we obtain intermediate abundances [C/H] = 8.44 +- 0.06, [N/H] = 7.96 +- 0.10 and [O/H] = 8.75 +- 0.08. The errors reflect the fact that both the high and low scales are internally consistent within the errors, and they are too large to conclude that there is a solar abundance problem. However, the center-to-limb continuum flux variations predicted in the simulations appear to be inconsistent with solar data based on recently published work. This would favor the traditional thermal structure and lead to high CNO abundances of (8.52, 7.96, 8.80) close to the seismic scale. We argue that further empirical tests of NLTE corrections and the thermal structure are required for precise absolute abundances. The sensitivity of the simulations to spatial resolution and systematic errors in the underlying atmospheric physics should also be examined, and these effects may lead to an overestimate of the impact of convective overshooting on the thermal structure of the outer layers of the solar atmosphere. The uncertainties in the solar oxygen also imply that strong conclusions about the absence of solar beryllium depletion cannot be made.

79 ASTRONOMY AND ASTROPHYSICS↗

RELATIVE COMPOSITION AND ENERGY SPECTRA OF LIGHT NUCLEI IN COSMIC RAYS: RESULTS FROM AMS-01

Measurement of the chemical and isotopic composition of cosmic rays is essential for the precise understanding of their propagation in the galaxy. While the model parameters are mainly determined using the B/C ratio, the study of extended sets of ratios can provide stronger constraints on the propagation models. In this paper, the relative abundances of light-nuclei lithium, beryllium, boron, and carbon are presented. The secondary-to-primary ratios Li/C, Be/C, and B/C have been measured in the kinetic energy range 0.35-45 GeV nucleon{sup -1}. The isotopic ratio {sup 7}Li/{sup 6}Li is also determined in the magnetic rigidity interval 2.5-6.3 GV. The secondary-to-secondary ratios Li/Be, Li/B, and Be/B are also reported. These measurements are based on the data collected by the Alpha Magnetic Spectrometer AMS-01 during the STS-91 space shuttle flight in 1998 June. Our experimental results are in substantial agreement with other measurements, where they exist. We describe our light-nuclei data with a diffusive-reacceleration model. A 10%-15% overproduction of Be is found in the model predictions and can be attributed to uncertainties in the production cross-section data.

79 ASTRONOMY AND ASTROPHYSICS↗

TMAP modeling of D release from baked multi-layer Be–D co-deposits

Single-layer Beryllium–Deuterium (Be–D) co-deposits were analyzed using Thermal Desorption mass Spectrometry (TDS) as outlined in the companion paper. This work details the TMAP modeling and the analysis of selected samples that received double-layer (DL) coatings to study co-deposit thickness and prior bake effects. Here, TDS data were simulated with detrap energies 0.8, 0.9, and 1.0 eV. In DLs formed at 393 K, modeling revealed that under-layers baked at 623 K for either 2 or 20 h had little pumping effect on over-layers, suggesting empty trap removal during bake. Extrapolated to ITER, data and analysis suggest less impact on the ongoing ITER bake efficiency than previously predicted.

36 MATERIALS SCIENCE↗

Ion beam analysis of fusion plasma-facing materials and components: facilities and research challenges

Following the IAEA Technical Meeting on 'Advanced Methodologies for the Analysis of Materials in Energy Applications Using Ion Beam Accelerators', our work reviews the current status of ion beam analysis (IBA) techniques and some aspects of ion-induced radiation damage in materials for the field of materials relevant to fusion. Available facilities, apparatus development, future research options and challenges are presented and discussed. The analysis of beryllium and radioactivity-containing samples from future experiments in JET or ITER represents not only an analytical but also a technical challenge. A comprehensive list of the facilities, their current status, and analytical capabilities comes alongside detailed descriptions of the labs. A discussion of future issues of sample handling and the current status of facilities at JET complete the technical section. To prepare the international IBA community for these challenges, the IAEA technical meeting finalizes the necessity for determining new nuclear reaction cross-sections and improving the inter-laboratory comparability by defining international standards and testing these via a round-robin test.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A POSSIBLE SIGNATURE OF NON-UNIFORM Be-{alpha} RELATIONSHIPS FOR THE GALAXY

Most of the previous studies on beryllium abundances in metal-poor stars have taken different Galactic populations as a whole when investigating the production and evolution of Be. In this Letter, we report on the detection of systematic differences in [{alpha}/H]-A(Be) relationships between the low- and high-{alpha} stars which were identified by previous works. We remind that one should be more careful in investigating the Galactic evolution of Be with a sample comprising different Galactic populations, because such a mixed sample may lead to inaccurate Be-Fe/Be-O relationships.

79 ASTRONOMY AND ASTROPHYSICS↗

MOLYBDENUM, RUTHENIUM, AND THE HEAVY r-PROCESS ELEMENTS IN MODERATELY METAL-POOR MAIN-SEQUENCE TURNOFF STARS

The ratios of elemental abundances observed in metal-poor stars of the Galactic halo provide a unique present-day record of the nucleosynthesis products of its earliest stars. While the heaviest elements were synthesized by the r- and s-processes, dominant production mechanisms of light trans-ironic elements were obscure until recently. This work investigates further our 2011 conclusion that the low-entropy regime of a high-entropy wind (HEW) produced molybdenum and ruthenium in two moderately metal-poor turnoff stars that showed extreme overabundances of those elements with respect to iron. Only a few, rare nucleosynthesis events may have been involved. Here we determine abundances for Mo, Ru, and other trans-Fe elements for 28 similar stars by matching spectral calculations to well-exposed near-UV Keck HIRES spectra obtained for beryllium abundances. In each of the 26 turnoff stars with Mo or Ru line detections and no evidence for s-process production (therefore old), we find Mo and Ru to be three to six times overabundant. In contrast, the maximum overabundance is reduced to factors of three and two for the neighboring elements zirconium and palladium. Since the overproduction peaks sharply at Mo and Ru, a low-entropy HEW is confirmed as its origin. The overabundance level of the heavy r-process elements varies significantly, from none to a factor of four, but is uncorrelated with Mo and Ru overabundances. Despite their moderate metallicity, stars in this group trace the products of different nucleosynthetic events: possibly very few events, possibly events whose output depended on environment, metallicity, or time.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray atomic absorption of cesium and xenon in the L-edge region

X-ray absorption of atomic cesium is measured in the L-edge region, using a beryllium-window cell for cesium vapor. For comparison, absorption in Xe gas in the same energy region is remeasured with improved signal-to-noise ratio. By combining deconvolution and modeling, the edge profiles are studied to determine the threshold energies and the shape of the edge apex with exponential slope of the high-energy flank. In both elements, multielectron excitations show the same basic ordering in compact groups, largely independent of the core-hole subshell, following the energy sequence of coexcited valence and subvalence orbitals. The main effect of 6s electron in Cs, apart from 2(s,p)6s excitation, is the enhancement of single- as well as some multielectron resonant channels. The spectra of both elements show the ''polarization effect'': a convex basic curvature of the L{sub 2} and L{sub 3} segments, a concave L{sub 1} segment. Previously, Kutzner demonstrated a convincing theoretical explanation of the effect on Xe in a relativistic random-phase approximation with relaxation involving overlap integrals with continuum [Rad. Phys. Chem. 70, 95 (2004)].

74 ATOMIC AND MOLECULAR PHYSICS↗

Theory of ultrafast autoionization dynamics of Fano resonances

We study atomic autoionization processes in the time domain. With the emerging attosecond extreme vacuum ultraviolet and soft x-ray pulses, we first address how to characterize the time evolution of the decay of a discrete state into a degenerate continuum. A short pump beam generates a number of resonance states in a series and the nearby background continuum, and the resultant wave packet evolves with time until the full decay of the bound states. Taking the 2pns({sup 1}P{sup o}) resonance series embedded in the 2s{epsilon}p({sup 1}P{sup o}) continuum in a beryllium atom as an example, the time evolution of the autoionizing wave packet in the energy domain and in coordinate space is calculated and analyzed, where Fano profiles build up in the photoelectron energy during the process. A proposed pump-probe scheme assumes that the probe beam ionizes the 2s inner electron in the wave packet. The lifetimes of the resonances and the photoelectron energy distribution can be obtained from the ionization yield vs. the time delay of the probe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light nuclei of even mass number in the Skyrme model

We consider the semiclassical rigid-body quantization of Skyrmion solutions of mass numbers B=4,6,8,10, and 12. We determine the allowed quantum states for each Skyrmion and find that they often match the observed states of nuclei. The spin and isospin inertia tensors of these Skyrmions are accurately calculated for the first time and are used to determine the excitation energies of the quantum states. We calculate the energy level splittings, using a suitably chosen parameter set for each mass number. We find good qualitative and encouraging quantitative agreement with experiment. In particular, the rotational bands of beryllium-8 and carbon-12, along with isospin 1 triplets and isospin 2 quintets, are especially well reproduced. We also predict the existence of states that have not yet been observed and make predictions for the unknown quantum numbers of some observed states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Production of very neutron-rich nuclei with a {sup 76}Ge beam

Production cross sections for neutron-rich nuclei from the fragmentation of a {sup 76}Ge beam at 132 MeV/u were measured. The longitudinal momentum distributions of 34 neutron-rich isotopes of elements 13{<=}Z{<=}27 were scanned using a novel experimental approach of varying the target thickness. Production cross sections with beryllium and tungsten targets were determined for a large number of nuclei, including 15 isotopes first observed in this work. These are the most neutron-rich nuclides of the elements 17{<=}Z{<=}25 ({sup 50}Cl, {sup 53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, and {sup 70}Mn). A one-body Q{sub g} systematics is used to describe the production cross sections based on thermal evaporation from excited prefragments. Some of the fragments near {sup 58}Ca show anomalously large production cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗