Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “B2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Field measurements in MSAT-X

Results from the most recent MSAT-X field experiments, the Tower-3 Experiment and the JPL/FAA/INMARSAT MARECS-B2 Satellite Experiment, are presented. Results that distinguish the propagation environment of the tower set-up are given and explained. The configuration and flight variables of the aeronautical experiment which used an FAA aircraft and an INMARSAT satellite are described. Results that highlight the disturbances on the aeronautical satellite channel are presented. The roles of satellite-induced signal variations and of multipatch are identified and their impact on the link is discussed.

Dessouky, Khaled↗

New observations of interstellar organic molecules

Discussed here are new observations of 3-carbon-containing interstellar molecules which play an important role in the chemistry of dense molecular clouds: protonated carbon dioxide, formic acid, and propynal. In 1984 a new oxide of carbon, C3O, was discovered in the interstellar medium (Matthews et al. 1984; Brown et al. 1985). Theoretical models suggest that C3O is produced by dissociative electron recombination with the ion H3C3O+. Although no laboratory data for the branching ratios of such a recombination exist, it seemed to us likely that additional products would include H2C3O. This molecule has more than one isomeric form, but one stable species is propynal (HC2CHO), which had been suggested as a possible interstellar molecule by Winnewisser (1973). In observations at the National Radio Astronomy Observatory 43 m telescope in Green Bank earlier this year, researchers detected a line in the cold cloud TMC-1 which they assign to the 2(0,2)-1(0,1) transition of propynal. The observed line agrees with the laboratory frequency to well within the experimental uncertainty a few parts in 10 to the 7th power. Researchers sought and failed to detect the corresponding 2(1,1)-1(1,0) line, which is understandable given the presence of both a and b components of the electric dipole moment in propynal. The b type transitions will drain population from energy levels with K(sub p) does not equal 0 into the K(sub p) equal 0 stack. If the researchers' assignment is correct, this is the first interstellar detection of propynal. Assuming typical rotational temperatures for TMC-1 and that the line is optically thin, the column density determined is about 5 times 10 to the 12th power cm to the -2nd power, or about three times that for C3O. Formic acid (HCOOH) was the first organic acid to be observed in the interstellar medium, in the Galactic center source Sgr B2. The only other interstellar detection has been recently made in the giant molecular cloud in Orion. As part of the same project that led to the detection of propynal, researchers sought formic acid in the nearby, cold dark clouds TMC-1 and L134N. It is seen only in L134N. This difference between the two clouds appears to be consistent with a model in which the oxygen/carbon ratio is higher in L134N. This would be consistent with the higher abundances for SO and SO2, observed in that cloud, and the higher abundances of many carbon-rich species in TMC-1 (Irvine et al. 1985).

Irvine, W. M.↗

First detection of the O-18 isotope of methanol

Interstellar CH3(O-18)H has been detected using NASA's 70-m antenna at Tidbinbilla. The 2(0)-3(-1) transition at 11.6 GHz was detected in absorption at two positions in the direction of Sgr B2. The profile shapes were similar to those for the corresponding transitions of CH3OH and (C-13)H3OH, containing velocity components centered near 64 and 80 km/s. Abundance ratios were derived using the simplest assumptions. The O-16/O-18 ratio was 210 + or - 40; the value would be larger after correction for radiation trapping but still well below the terrestrial value of 489. The (C-13)H3OH/CH3(O-18)H ratio was 7.5 + or - 1.0, above the value (5.5) derived from terrestrial C-12/C-12 and O-16/O-18 ratios, but close to the isotope abundance ratio (9.0) determined from formaldehyde observations. In view of the complexity of the methanol energy-level diagram, the similarity suggests that excitation of the lowest energy levels is largely collisional.

Gardner, F. F.↗

Radio-continuum emission from the ionized stellar winds of warm supergiants

The Very Large Array has been used at an observing wavelength of 6 cm to survey 25 supergiants of spectral types between B2 and F8. Only one of these stars (Beta Ori, or Rigel) has been detected as a radio-continuum source, with an inferred 6 cm luminosity L6 of 7 x 10 to the 16th ergs/sec per Hz. Rigel may also be an X-ray source (and, if it were, would be the only X-ray detected star out of the 12 stars in this sample that were observed by Einstein. An extended source of more than 10 mJy flux density with the same angular dimensions and location as He 1-5, the planetary nebula surrounding the peculiar supergiant FG Sge, and a weak localized source of roughly 0.1-0.2 mJy somewhat offset from the center of the extended radio emission have also been detected. The upper limits to L6 for the F Ib stars are as much as an order of magnitude below the level at which Rigel was detected. If the radio emission from Rigel is interpreted as free-free radiation from its stellar wind, the inferred ionized mass-loss rate is 2.5 x 10 th the 7th solar mass/yr. The most stringent upper limits to the ionized mass-loss rates obtained for the F and A supergiants are not greater than 10 to the -8th solar mass/yr and less than or equal to 10 to the -7th solar mass/yr, respectively.

Drake, S. A.↗

Deformation behavior of NiAl-based alloys containing iron, cobalt, and hafnium

The effects of alloying additions on the mechanical properties of the B2 intermetallic NiAl have been investigated in both the melt-spun ribbon and consolidated, bulk form. The study is based on a matrix of NiAl-based alloys with up to 20 at. pct Co and Fe additions and with reduced Al levels in the range of 30-40 at. pct. Characterization of the melt-spun ribbon by optical and scanning electron microscopy indicates a range of microstructures, including single-phase beta, gamma-prime necklace phase surrounding either martensitic or beta grains, and a mixture of equiaxed martensitic and gamma-prime grains. Bend ductility is present in melt-spun and annealed ribbons exhibiting the gamma-prime necklace structure and in a single-phase beta material containing 20 at. pct Fe. The analysis of compressive flow behavior on consolidated, bulk specimens indicates that the single-phase beta alloys exhibit a continuous decrease in yield stress with increasing temperature and profuse microcracking at grain boundaries. In contrast, multiphase (gamma-prime + either martensite or beta) alloys tend to display a peak in flow stress between 600 and 800 K, with little or no signs of microcracking. In general, heat treatments which convert the martensitic grains to beta + gamma-prime result in improved strength at temperatures above 600 K and better resistance to crack initiation.

Pank, D. R.↗

Preliminary investigation of a NiAl composite prepared by cryomilling

An attempt has been made to improve the high temperature mechanical strength of the B2 cubic crystal structure intermetallic NiAl by dispersion strengthening. Prealloyed Ni-51 at. pct Al was cryomilled with a Y2O3 addition to form an yttria dispersoid within the intermetallic matrix. Following milling, the powder was hot extruded to full density and machined into test coupons. Compression testing between 1200 and 1400 K indicated that the cryogenic process yielded the strongest NiAl based material tested to date. Creep resistance was six times better than NiAl and twice that of a NiAl particulate composite containing 10 vol pct TiB2. Surprisingly, transmission electron microscopy revealed that the second phase was inhomogeneously distributed. Furthermore, X-ray analysis indicated that the second phase was not Y2O3 but rather AlN.

Whittenberger, J. Daniel↗

High-pressure phase transition and equation of state of CsI

Stuructural properties of CsI at high pressure have been investigated by the use of synchrotron X-ray-diffraction techniques with the diamond-anvil cell at 300 K. The results indicate that the material undergoes a continuous distortion from B2 to an hcp-like phase, which is stable to at least 302 GPa. The intermediate orthorhombic phase is geometrically different from previous assignments and about 10 percent denser. With the new structure, the p-V results of static pressure experiments, shock-wave studies, and theoretical calculations are now in good agreement.

Mao, H. K.↗

Microstructure and mechanical properties of multiphase NiAl-based alloys

The effect of the gamma-prime phase on the deformation behavior and fracture resistance of melt-spun ribbons and consolidated bulk specimens of a series of Nial-based alloys with Co and Hf additions has been examined. The morphology, location, and volume fraction of the gamma-prime phase are significant factors in enhancing the fracture resistance of the normally brittle NiAl-based alloys. In particular, the results indicate that a continuous-grain-boundary film of gamma-prime can impart limited room-temperature ductility regardless of whether B2 or L10 NiAl is present. Guidelines for microstructure control in multiphase NiAl-based alloys are also presented.

Pank, D. R.↗

Interstellar cyanomethane

An observational study was made of the newly identified cyanomethane radical CH2CN and the possibly related species CH3CN with the goals of elucidating the possible role of reactions of the type CnHm(+) + N in astrochemistry, and providing a possible test of Bates's models of dissociative electron recombination. A remarkably different abundance ratio CH2CN/CH3CN was found in TMC-1 and Sgr B2 which is deduced to be a result of the large difference in temperature of these objects. Studies of CH2CN and CH3CN in other sources, including two new detections of CH2CN, support this conclusion and are consistent with a monotonic increase in the CH2CN/CH3CN ratio with decreasing temperature over the range 10-120 K. This behavior may be explained by the destruction of CH2CN by reaction with O.

Turner, B. E.↗

Infrared studies of elliptical galaxies. II - A radio-selected sample

An IR survey of radio galaxies in the Bologna B2 catalog is reported. It is found that 40 percent of the sample has IR luminosities of at least one billion solar luminosities, as opposed to about 8 pecent of normal ellipticals. The galaxies are inhomogeneous in their IR properties. The most IR-luminous galaxies are those listed as peculiar by Zwicky. Statistically, these galaxies are strikingly different from Seyfert galaxies in their IR properties in that they show much more radio emission in comparison with their IR emission than do Seyferts, even when the emission from the extended radio lobes has been discounted.

Impey, C. D.↗

Elevated temperature slow plastic deformation of NiAl-TiB2 particulate composites at 1200 and 1300 K

Elevated temperature compression testing has been conducted in air at 1200 and 1300 K with strain rates varying from about 10 to the -4th to about 10 to the -7th/sec on NiAl-TiB2 particulate composites. These materials, which consisted of a B2 crystal structure intermetallic Ni-50 at. pct Al matrix and from 0 to 30 vol pct of approximately 1- micron diameter TiB2 particles, were fabricated by XD synthesis and hot pressed to full density. Flow strength of the composites increased with volume fraction of the strengthening phase with NiAl-30TiB2 being approximately three times stronger than NiAl. Comparison of the light optical and TEM microstructures of as-received and tested samples revealed that reactions did not occur between the two phases, and NiAl-TiB2 interfaces were not cracked during deformation. Additional TEM indicated that the particles stabilize a vastly different microstructure in the NiAl matrix of the composites than that formed in unreinforced NiAl.

Whittenberger, J. Daniel↗

Slow plastic deformation of extruded NiAl-10TiB2 particulate composites at 1200 and 1300 K

A dispersion of 1-micron TiB2 particles in the B2 crystal structure NiAl intermetallic can effectively increase its elevated temperature strength, in association with increasing deformation resistance with TiB2 volume fraction. Attention is presently given to alternative densification methods, which may increase the initial as-fabricated dislocation density and lead to enhanced elevated-temperature strength. The 'XD' extrusion method was used to produce NiAl with 10 vol pct TiB2. Although apparent extrusion defects were occasionally found, neither grain-boundary cracking nor particle-matrix separation occurred.

Whittenberger, J. D.↗

The complex nature of the Seyfert galaxy NGC 7592

Long slit spectra of NGC 7592 were taken on Sep. 26 to 30, 1989 at the 1.52 cm European Southern Observatory (ESO) telescope, equipped with a Boller and Chivens spectrograph and an RCA High Resolution charge coupled device (CCD) camera. The problem of the nature of Region C is addressed at first. C shows an heliocentric radial velocity very similar to that of Regions A and B. Moreover, the arm departing from C is most probably a tidal tail, because its extension is large and its orientation is peculiar. The high H alpha luminosity of C is typical of a starburst nucleus. These facts argue in favor of C being the nucleus of a third galactic component (southern component S) physically interacting with the SE component of NGC 7592. The directions of the velocity vectors in various regions of NGC 7592 are marked. It is noteworthy that the SE component rotates clockwise, if the radial velocity difference delta v sub r from its nucleus B is due to rotation. Under the same assumption for the delta v sub r = v sub r-v sub r, A, the NW component seems to rotate counterclockwise. Thus, the gas in the regions where the two galactic bodies are in contact moves in the same way, suggesting that a prograde encounter is occurring. It is known (e.g., Toomre and Toomre, 1972) that prograde encounters have the most disruptive effects on the interacting galaxies, leading to the formation of tidal tails. The interpretation of the wing of the NW component in terms of a tidal tail thus appears very likely. A similar situation holds for the interaction between SE and S too, where S rotates counterclockwise. The interpretation of the arm departing from C as a tidal tail is supported also in this case. The difference in radial velocity between A and B (delta v sub r approx. equal - 40 km s(exp-1)) and the morphology of NGC 7592 suggests that the NW component is beyond the SE one and is approaching it. The most heavily reddened regions (E(B - V) approx. equals 0.7, derived from the H alpha/H beta ratio) are B2 and B4, namely the regions between A and B. Moreover, the small difference in radial velocity between A,B,C suggests that the three galaxies form a bound system, and their kinematics hints that they are most probably in the early stage of a merging phenomenon.

Rafanelli, Piero↗

Expert operator's associate: A knowledge based system for spacecraft control

The Expert Operator's Associate (EOA) project is presented which studies the applicability of expert systems for day-to-day space operations. A prototype expert system is developed, which operates on-line with an existing spacecraft control system at the European Space Operations Centre, and functions as an 'operator's assistant' in controlling satellites. The prototype is demonstrated using an existing real-time simulation model of the MARECS-B2 telecommunication satellite. By developing a prototype system, the extent to which reliability and effectivens of operations can be enhanced by AI based support is examined. In addition the study examines the questions of acquisition and representation of the 'knowledge' for such systems, and the feasibility of 'migration' of some (currently) ground-based functions into future spaceborne autonomous systems.

Nielsen, Mogens↗

1300 K compressive properties of a reaction milled NiAl-AlN composites

When B2 crystal-structure nickel aluminide is subjected to high-intensity mechanical ball milling in a liquid nitrogen bath, or 'cryomilling', an NiAl composite is obtained which contains about 10 vol pct AlN particles. This composition arises from the incorporation of N during cryomilling; during subsequent thermomechanical processing, the N reacts with Al. While compressive testing of extruded or isostatically pressed specimens at 1300 K indicated that strength at relatively fast strain rates is slightly dependent on consolidation method, slower strain rates indicate no clear dependency on densification technique: four different consolidation methods were found to yield similar creep strengths. The creep properties of NiAl-AlN are similar to those of the single-crystal Ni-base superalloy NASAIR 100.

Whittenberger, J. Daniel↗

Nitric oxide in star-forming regions - Further evidence for interstellar N-O bonds

Nitric oxide has been newly detected toward several star-forming clouds, including Orion-KL, Sgr B2(N), W33A, W51M, and DR21(OH) via its J = 3/2-1/2 transitions near 150 GHz, using the FCRAO 14 m telescope. Both lambda-doubling components of NO were observed toward all sources. Column densities derived for nitric oxide in these clouds are 10 to the 15th-10 to the 16th/sq cm, corresponding to fractional abundances of 0.5-1.0 x 10 to the -8th, relative to H2. Toward Orion-KL, the NO line profile suggests that the species arises primarily from hot, dense gas. Nitric oxide may arise from warm material toward the other clouds as well. Nitric oxide in star-forming regions could be synthesized by high-temperature reactions, although the observed abundances do not disagree with values predicted from low-temperature, ion-molecule chemistry by more than one order of magnitude.

Ziurys, L. M.↗

Fassaite composition trends during crystallization of Allende Type B refractory inclusion melts

Major-, minor-, and trace-element zoning trends in fassaite from Type B1 and B2 inclusions from the Allende meteorite are defined by using electron and ion microprobe data. Fassaite/liquid distribution coefficients are calculated for many of the lithophile elements, and evidence for and against the presence of relict fassaite in these inclusions is discussed. Major-element zoning in fassaite in Type B CAIs is found from Ti-, V-, Sc-rich cores to relatively Mg-, Si-rich rims. Trace elements that are incompatible in this fassaite are Nb (effective fassaite/liquid distribution = 0.29), Y(0.52), Ta(0.34), Th(0.053), U(0.4), and rare earth elements (0.31-0.48), while compatible trace elements are Zr(1.1) and Hf(1.5). Rare-earth-elements (RRE) abundances in fassaite are found to be controlled by crystal/liquid fractionation. Candidates for relict fassaite grains are discovered: Ti-, Sc-rich, REE-poor crystals enclosed in melilite in the mantle of TS34.

Simon, Steven B.↗

Millimeter continuum observations of Galactic center giant molecular cloud cores

Results are presented of observations of 1.3- and 0.8-mm continuum emission toward the cores of three Galactic center molecular clouds with ongoing massive star formation, Sagittarius B2, C, and D, which were made in order to study possible variations in the high-mass star formation rate per unit mass between the Galactic center and the disk. The luminosity-to-mass ratio, based on the mass estimates derived from the millimeter continuum emission, is used as a tracer of the high-mass star formation rate in GMC cores. The magnitude of errors involved in using millimeter continuum emission for determining the core mass is estimated through radiative transfer modeling. It is inferred from the present millimeter data, along with previously published far-infrared data, that the Sgr C and D cores are very similar in terms of mean dust optical depth and temperature. The luminosity-to-mass ratios derived for the Sgr C and D cores are found to be consistent with those of typical disk GMC cores with comparable far-infrared luminosities.

Lis, D. C.↗