Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantum turbulence, superfluidity, non-Markovian dynamics, and wave function thermalization

While quantum turbulence has been addressed both experimentally (predominantly for superfluid He 4 and He 3 ) and theoretically, the dynamics of various ensembles of quantized vortices has been followed in time only until the vortices have decayed into phonons. How this “thermalization” is achieved is still an unaddressed and thus an unelucidated question. The unitary Fermi gas (UFG) is a unique quantum system, which has no classical counterpart and is of relevance to neutron stars, cold atoms, condensed-matter and nuclear many-body systems. The non-Markovian evolution of an isolated UFG is put in evidence and its entire nonequilibrium evolution can be studied theoretically within a unified theoretical framework. The initial lattice of quantum vortices and antivortices evolves through a couple of vortex tangles and excitation of Kelvin waves, where vortices cross and reconnect, until very slowly thermalization sets in. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Unraveling the Highly Plastic Behavior of ALD-Aluminum Oxide Encapsulations by Small-Scale Tensile Testing

We present a study directly measuring the electron-beam-induced plasticity of amorphous Al 2 O 3 coatings. Core–shell nanostructures are employed as small-scale model systems for two-dimensional coatings made by atomic layer deposition (ALD). Copper nanowires (NWs) are used as substrates for ALD deposition, representing a model system for interconnects commonly found in integrated circuits. Experiments are performed in situ in a transmission electron microscope (TEM) and further analyzed with electron energy loss spectroscopy (EELS). Our in situ TEM tensile experiments reveal the highly plastic behavior of the ALD shell, which withstands a maximum strain of 188%. Comparable samples under beam-off conditions show a brittle fracture, which underlines the effect of electron irradiation. The electron-beam-activated bond switching within the amorphous network enables compensation of the applied tensile strain, leading to viscous flow. By incorporating an intermediate nanocrystalline layer within the Al 2 O 3 shell, the plasticity is suppressed and brittle fracture occurs. This work directly demonstrates the tuning of mechanical properties in amorphous ALD structures through electron irradiation.

36 MATERIALS SCIENCE↗
NASA NTRS1990

FTIR Monitoring Of Curing Of Composites

Infrared-sensing optical fiber system developed to monitor principal infrared absorption bands resulting from vibrations of atoms and molecules as chemical bonds form when resin cured. System monitors resin chemistry more directly. Used to obtain Fourier transform infrared (FTIR) spectrum from graphite fiber/polyimide matrix resin prepreg. Embedded fiber optic FTIR sensor used to indicate state of cure of thermosetting composite material. Developed primarily to improve quality of advanced composites, many additional potential applications exist because principal of operation applicable to all organic materials and most inorganic gases. Includes monitoring integrities of composite materials in service, remote sensing of hazardous materials, and examination of processes in industrial reactors and furnaces.

Druy, Mark A.↗
NASA NTRSDate not supplied

Initial Test Results for NASA Goddard’s Low-Cost Optical Terminal Adaptive Optics System

This presentation presents the testing approach and initial laboratory test results of the Adaptive Optics (AO) Subassembly (AOS) for the Low-Cost Optical Terminal (LCOT), a low-cost and flexible optical communications ground terminal. Leveraging commercial components and subassemblies wherever possible, LCOT is being developed by the NASA Goddard Space Flight Center (GSFC) Advanced Communications Capabilities for Exploration and Science Systems (ACCESS) project. An economical ground terminal allows NASA to create a global optical terminal network and enables the expansion of direct-to-Earth (DTE) optical communications. Located at the Goddard Geophysical and Astronomical Observatory (GGAO), LCOT is in the development phase and will receive first light during initial testing beginning in 2023. This new optical terminal includes a 700 mm Ritchey-Chretien commercial telescope, able to track Low Earth Orbit (LEO) spacecraft, receive instruments specified from 1500 - 1600 nm, and an uplink transmit optical system. Demodulation of optical coherent modulation formats requires downlink signal coupling into single-mode fiber. Due to atmospheric turbulence, signals experience wavefront distortions creating speckle patterns larger than the fiber core and high jitter requiring precise beam steering. AO is necessary to correct atmospheric turbulence effects and allow efficient coupling of received signals. In 2020, GSFC contracted with General Atomics to provide the LCOT AO system. This system has been delivered to GSFC in September 2021 and has been tested in laboratory to evaluate performance. This paper describes the laboratory testing approach, turbulence phase plate design, test results, and the AO field testing plan when installed on the LCOT telescope.

Adaptive Optics↗
DOE OSTI2021

CHARMM-GUI Drude prepper for molecular dynamics simulation using the classical Drude polarizable force field

Explicit treatment of electronic polarizability in empirical force fields (FFs) represents an extension over a traditional additive or pairwise FF and provides a more realistic model of the variations in electronic structure in condensed phase, macromolecular simulations. To facilitate utilization of the polarizable FF based on the classical Drude oscillator model, Drude Prepper has been developed in CHARMM-GUI. Drude Prepper ingests additive CHARMM protein structures file (PSF) and pre-equilibrated coordinates in CHARMM, PDB, or NAMD format, from which the molecular components of the system are identified. These include all residues and patches connecting those residues along with water, ions, and other solute molecules. This information is then used to construct the Drude FF-based PSF using molecular generation capabilities in CHARMM, followed by minimization and equilibration. In addition, inputs are generated for molecular dynamics (MD) simulations using CHARMM, GROMACS, NAMD, and OpenMM. Validation of the Drude Prepper protocol and inputs is performed through conversion and MD simulations of various heterogeneous systems that include proteins, nucleic acids, lipids, polysaccharides, and atomic ions using the aforementioned simulation packages. Stable simulations are obtained in all studied systems, including 5 μs simulation of ubiquitin, verifying the integrity of the generated Drude PSFs. Additionally, the ability of the Drude FF to model variations in electronic structure is shown through dipole moment analysis in selected systems. Finally, the capabilities and availability of Drude Prepper in CHARMM-GUI is anticipated to greatly facilitate the application of the Drude FF to a range of condensed phase, macromolecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The exceedingly strong two-dimensional ferromagnetism in bi-atomic layer SrRuO 3 with a critical conduction transition

In recent years, few-layer or even monolayer ferromagnetic materials have drawn a great deal of attention due to the promising integration of two-dimensional (2D) magnets into next-generation spintronic devices. The SrRuO 3 monolayer is a rare example of stable 2D magnetism under ambient conditions, but only weak ferromagnetism or antiferromagnetism has been found. The bi-atomic layer SrRuO3 as another environmentally inert 2D magnetic system has been paid less attention heretofore. Here we study both the bi-atomic layer and monolayer SrRuO 3 in (SrRuO 3 ) n /(SrTiO 3 ) m (n = 1, 2) superlattices in which the SrTiO 3 serves as a non-magnetic and insulating space layer. Although the monolayer exhibits arguably weak ferromagnetism, we find that the bi-atomic layer exhibits exceedingly strong ferromagnetism with a T c of 125 K and a saturation magnetization of 1.2 μ B /Ru, demonstrated by both superconducting quantum interference device (SQUID) magnetometry and element-specific X-ray circular dichroism. Moreover, in the bi-atomic layer SrRuO 3 , we demonstrate that random fluctuations and orbital reconstructions inevitably occurring in the 2D limit are critical to the electrical transport, but are much less critical to the ferromagnetism. Our study demonstrates that the bi-atomic layer SrRuO 3 is an exceedingly strong 2D ferromagnetic oxide which has great potentials for applications of ultracompact spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A TOpographic Mapping (ATOM) Method to Design Magnetic Cores

Wireless power transfer offers safe, convenient, and efficient way of charging electric vehicles. Ongoing research is targeting wireless charging pad design optimization; designing the magnetic component is the most important part of the coupler design because the magnetic part determines the coupling factor and efficiency. Optimizing the coil layout and geometry as well as ferrite design requires finite elements analysis based modeling and simulation for minimized core losses, maximized magnetic coupling, and minimized material use for cost-effectiveness. Although parametric finite element analysis or emerging artificial intelligence methods can generate very accurate results, simulation times are extremely long. To address this issue, this study proposes a simple, effective core design called A TOpographic Mapping (ATOM). The proposed design is based on the design of magnetic core by using the magnetic flux distribution. The thickness of the core increases with increasing magnetic flux density, forming a variable thickness core design with less material and minimized core losses compared to conventional designs. A superimposing method is used to create an optimal design for a rotational magnetic field-based system. According to simulation results, the ATOM design reduces the required material volume by 13.19% and yields the lowest core loss and highest mutual inductance compared to other designs. In addition, misalignment, electromagnetic interference, and thermal performance were evaluated for the proposed design.

Aydin, Emrullah [Oak Ridge National Laboratory (OR↗
NASA NTRS1985

Stirling engine supporting research and technology

The supporting research and technology effort is intended to provide technical support to the current engine program and also to investigate advanced concepts for the next generation of Stirling engines. Technical areas represented are: seals, materials, engine experiments, combustion, system analysis, cseramics, and tribology. A collage of more recent work in each area is presented. Under seals, analysis and some experimental data on the effect of wear on rod seal performance is presented. The material work described concerns the effect of water content on hydrogen permeation. Results of experiments with the Philips' Advenco engine are presented. A comparison is made of two combustor nozzles, an air atomizing and an ultrasonic atomizing nozzle. A new venture in systems analysis to provide more rigorous Stirling engine simulation is discussed. The results of hydrogen corrosion tests on silicon carbide are presented. Friction and wear tests on candidate materials for engine hot ring tests are discussed.

Tomazic, W. A.↗
DOE OSTI2026

Ground and excited state gradients with end-to-end differentiable semiempirical quantum chemistry

Accurate and efficient gradients of molecular energy with respect to nuclear degrees of freedom are essential for geometry optimization and molecular dynamics, including simulations that go beyond the Born–Oppenheimer regime. A common approach involves deriving analytical formulas for new electronic structure methods, which is often conceptually difficult and requires tedious coding. Here, we implement analytical, semi-numerical, and automatic differentiation (AD)-based gradient pathways for semiempirical Hamiltonian models in the PYSEQM software package, leveraging both graphics processing unit (GPU) and central processing unit (CPU) architectures. We further extend these capabilities to excited states calculated using the configuration interaction singles and time-dependent Hartree–Fock ansätze. We benchmark wall time, peak memory usage, and accuracy across three molecular families of varying chemical complexity, including systems of up to a thousand atoms. For ground-state simulations, analytical and AD gradients achieve near-identical GPU runtimes, while semi-numerical gradients are slower on GPU but remain competitive on CPU. For excited states, both analytical and custom AD approaches using implicit differentiation show similar performance and low memory requirements, whereas gradients with full AD are memory-limited. AD gradients match analytical ones in accuracy across all tested systems, aided by a quaternion-based diatomic frame rotation for two-center quantities that ensures smooth energy surfaces. Overall, automatic differentiation emerges as a practical alternative to analytical gradients in semiempirical quantum chemistry, offering high accuracy while allowing seamless integration in AI-driven workflows and popular packages, such as PyTorch and JAX. Our results provide actionable guidance for selecting optimal gradient strategies in large-scale ground- and excited-state molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

An overview of the Evaluation of Oxygen Interactions with Materials 3 experiment: Space Shuttle Mission 46, July-August 1992

The Evaluation of Oxygen Interactions with Materials 3 (EOIM-3) flight experiment was developed to obtain benchmark atomic oxygen reactivity data and was conducted during Space Transportation System Mission 46 (STS-46), July 31 to August 7, 1992. In this paper, we present an overview of EOIM-3 and the results of the Lyndon B. Johnson Space Center (JSC) materials reactivity and mass spectrometer/carousel experiments. Mass spectrometer calibration methods are discussed briefly, as a prelude to a detailed discussion of the mass spectrometric results produced during STS-46. Mass spectrometric measurements of ambient O-atom flux and fluence are in good agreement with the values calculated using the MSIS-86 model of the thermosphere as well as estimates based on the extent of O-atom reaction with Kapton polyimide. Mass spectrometric measurements of gaseous products formed by O-atom reaction with C(13) labeled Kapton revealed CO, CO2, H2O, NO, and NO2. Finally, by operating the mass spectrometer so as to detect naturally occurring ionospheric species, we characterized the ambient ionosphere at various times during EOIM-3 and detected the gaseous reaction products formed when ambient ions interacted with the C(13) Kapton carousel sector. By direct comparison of the results of on-orbit O-atom exposures with those conducted in ground-based laboratory systems, which provide known O-atom fluences and translational energies, we have demonstrated the strong translational energy dependence of O-atom reactions with a variety of polymers. A 'line-of-centers' reactive scattering model was shown to provide a reasonably accurate description of the translational energy dependence of polymer reactions with O atoms at high atom kinetic energies while a Beckerle-Ceyer model provided an accurate description of O-atom reactivity over a three order-of-magnitude range in translational energy and a four order-of-magnitude range in reaction efficiency. Postflight studies of the polymer samples by x-ray photoelectron spectroscopy and infrared spectroscopy demonstrate that O-atom attack is confined to the near-surface region of the sample, i.e. within 50 to 100 A of the surface.

Koontz, Steven L.↗
DOE OSTI2021

The FMO-DFTB Method

Although the fragment molecular orbital (FMO) method enables electronic structure calculations with near-linear scaling behavior with respect to system size, the computational cost of ab initio methods typically employed in conjunction with FMO is still prohibitive for routine calculations of very large systems or long timescale molecular dynamics simulations. We, therefore, combined the FMO and density-functional tight-binding (DFTB) method, which is one of the emerging semi-empirical quantum chemical methods, and have demonstrated that FMO-DFTB is capable of performing geometry optimizations for systems containing up to one million atoms using limited computational resources. In this chapter, we will review the basics of the DFTB method first before introducing FMO-DFTB, focusing on the relationship with density functional theory and other FMO methodologies. We also demonstrate the latest scalings of FMO-DFTB2 and DFTB3 using three-dimensional water clusters, showing that the most favorable scaling is O(N1.16). Applications of FMO-DFTB to various systems are briefly summarized, and an outlook to future applications is provided.

Nishimoto, Yoshio↗
DOE OSTI2022

Active Cancellation of Servo-Induced Noise on Stabilized Lasers via Feedforward

Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large “servo bumps” that can have deleterious effects for certain applications. The prevailing approach to filtering this noise is to pass the laser through a high-finesse optical cavity, which places constraints on the system design. Here, we propose and demonstrate a different approach where a frequency error signal is derived from a beat note between the laser and the light that passes through the reference cavity. The phase noise derived from this beat note is fed forward to an electro-optic modulator after the laser, carefully accounting for relative delay, for real-time frequency correction. With a hertz-line-width laser, we show ≳20 dB noise suppression at the peak of the servo bump (approximately 250 kHz) and a noise-suppression bandwidth of approximately 5 MHz—well beyond the servo bump. By simulating the Rabi dynamics of a two-level atom with our measured data, we demonstrate substantial improvements to the pulse fidelity over a wide range of Rabi frequencies. Here, our approach offers a simple and versatile method for obtaining a clean spectrum of a narrow-line-width laser, as required in many emerging applications of cold atoms, and is readily compatible with commercial systems that may even include wavelength conversion.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

A new approach to removing H atoms in hydrogen depassivation lithography

Hydrogen deppasivation lithography (HDL) carried out by a scanning tunneling microscope (STM) is used to make patterns of Si dimers on a hydrogen passivated silicon surface. In this paper we discuss a new STM mode of operation that is highly suitable for removing single H atoms from the surface. This is made possible by changes we have made to the STM feedback control system that allows the STM to remove hydrogen atoms without switching the operational mode from imaging to lithography. Employing this method can potentially reduce the chance of tip-sample crash and increase the lithography precision.

Moheimani, S. O. Reza↗
DOE OSTI2023

All-electron APW+ lo calculation of magnetic molecules with the SIRIUS domain-specific package

We report APW+lo (augmented plane wave plus local orbital) density functional theory (DFT) calculations of large molecular systems using the domain specific SIRIUS multi-functional DFT package. The APW and FLAPW (full potential linearized APW) task and data parallelism options and the advanced eigen-system solver provided by SIRIUS can be exploited for performance gains in ground state Kohn–Sham calculations on large systems. This approach is distinct from our prior use of SIRIUS as a library backend to another APW+lo or FLAPW code. We benchmark the code and demonstrate performance on several magnetic molecule and metal organic framework systems. We show that the SIRIUS package in itself is capable of handling systems as large as a several hundred atoms in the unit cell without having to make technical choices that result in the loss of accuracy with respect to that needed for the study of magnetic systems.

Chemistry↗
NASA NTRS1973

Evidence of charge exchange pumping in calcium-xenon system

Charge exchange between xenon ions and calcium atoms may produce an inversion between the 5s or 4d and 4p energy levels of the calcium ions. A low power flowing xenon plasma seeded with calcium was utilized to determine if charge exchange or electron collisions populate the 5s and 4d levels Ca(+). Line intensity ratios proportional to the density ratios n5s/n4p and n4d/n4p were measured. From the dependence of these intensity ratios on power input to the xenon plasma it was concluded that charge exchange pumping of the 5s and 4d levels predominates over electron collisional pumping of these levels. Also, by comparing intensity ratios obtained using argon and krypton in place of xenon with those obtained in xenon the same conclusion was made.

Chubb, D. L.↗
NASA NTRS1974

Hot hydrogen atoms - Initiators of reactions of interest in interstellar chemistry and evolution

Hot hydrogen atoms possess kinetic (or translational) energy in excess of that to be expected if the atoms were in thermal equilibrium with the surroundings. In the investigation reported the hot hydrogen atoms were generated by the photolysis of donor molecules. The light sources for the photolysis were 1000-watt xenon or 500-watt mercury lamps combined with a filter system. The experiments show that hot hydrogen atoms can initiate reactions among simple molecules to produce biomolecules of significance.

Hong, K.-Y.↗
NASA NTRS2004

Spray Characteristics of a Hybrid Twin-Fluid Pressure-Swirl Atomizer

The spray performance of a fuel injection system applicable for use in main combustion chamber of an oxidizer-rich staged combustion (ORSC) cycles is presented. The experimental data reported here include mean drop size and drop size distribution, spray cone half-angle, and momentum rate (directly related to spray penetration). The maximum entropy formalism, MEF, method to predict drop size distribution is applied and compared to the experimental data. Geometric variables considered include the radius of the injector inlet orifice plate through which oxidizer flows (&) and the exposed length from the fuel inlet to the injector exit plane (L2). Operating conditions that were varied include the liquid mass flow rate and air mass flow rate. For orifices B and C there is a significant dependence of D3Z on both the air and liquid mass flow rates, as well as on L2. For the A orifice, the momentum rate of the air flow appears to exceed a threshold value above which a constant D32 is obtained. Using the MEF method, a semi-analytical process was developed to model the spray distribution using two input parameters (q = 0.4 and Dso). The momentum rate of the spray is directly related to the air and liquid mass flow rates. The cone half angle of the spray ranges from 25 to 17 degrees. The data resulting from this project will eventually be used to develop advanced rocket systems.

Durham, M. J.↗