Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Network structure in alteration layer of boroaluminosilicate glass formed by aqueous corrosion

Exogenously-added LiCl has been shown to slightly accelerate the corrosion rate of a boroaluminosilicate glass called International Simple Glass (ISG) in aqueous solutions over forward- and residual-rate regimes, while KCl and CsCl impede. To understand the effect of exogenously added electrolytes on resulting hydrous species and the network structure of alteration layers, infrared spectroscopy was implemented. It was found that the fraction of molecular water relative to the surface-bound hydroxyl species is lower in the KCl and CsCl conditions compared to the LiCl and pure water conditions. An approximation for the spectral features of the thin surface films from an experimentally-obtained specular-reflectance infrared (SR-IR) spectrum was proposed; results indicate no significant difference in the Si-O bonding network of the alteration layers formed in the presence of exogenously added LiCl, KCl and CsCl. Furthermore, the observed change in corrosion rates might be linked to the relative abundance of molecular water species in the porous network, rather than the silicate bonding structure.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

The effects of Fe and Al on the phase transformations and mechanical behavior of β-Ti alloy Ti-11at.%Cr

Alloy composition is important for developing desired microstructures in beta-titanium (β-Ti) alloys during thermomechanical processing. In this work, the relatively low-cost alloying elements iron (Fe) and aluminum (Al) were added to a base Ti-11at%chromium (Cr) alloy and in-situ and ex-situ examination of the microstructural evolution and mechanical properties during tension, hardness, elevated temperature X-ray diffraction (XRD) and resonance ultrasound spectroscopy (RUS) were performed. The 400 °C XRD revealed that Ti-11at%Cr underwent β-to-ω and β-to-α transformations. Adding 0.85at% Fe reduced the volume fraction of the ω- and α-phases, and adding 5.3at% Al inhibited the β-to-ω transformation. The 400 °C RUS showed that the alloys containing the ω phase exhibited an increase in shear modulus (G) of ~140%, while the ω-free alloys exhibited an increase of only ~102%. The hardness and strength values of the ω-containing Ti-11Cr and Ti-11Cr-0.85Fe increased with increased ω-phase volume fraction when the ω/α ratio was greater than 0.25. The relationship between ω/α volume ratios and mechanical properties is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ'-strengthened Al-Cu alloys

Here, microstructural evolution and creep response were investigated in the cast Al-5.0Cu-0.3Mn-0.2Zr (wt.%) alloy with and without addition of slow-diffusing, intermetallic-forming elements Fe, Ni, or Co. Baseline Al-5.0Cu-0.3Mn-0.2Zr alloy exhibits high creep resistance at 300 °C, up to ~75 MPa, which is attributed to high-aspect-ratio, intragranular θ'-Al 2 Cu precipitates that effectively suppress dislocation climb. However, θ'-Al 2 Cu precipitate-free zones form along grain boundaries upon heat treatment, whose extent is amplified during subsequent creep. Such weak regions experience dislocation creep, leading to strain localization and acceleration of grain-boundary sliding. Adding Ni and Co, individually or in combination, leads to the formation of grain-boundary precipitates (Al 9 Co 2 , Al 3 Ni 2 ) which are resistant to coarsening, thus suppressing the formation of θ'-Al 2 Cu precipitate-free zones. This microstructure provides high creep resistance at stresses up to 75–80 MPa, with strain rates much lower than in unmodified Al-5.0Cu-0.3Mn-0.2Zr. Adding Fe, which results in extensive decoration of grain boundaries with coarsening-resistant Al 7 Cu 2 Fe, and then increasing the Cu content to compensate for the Cu loss to this new phase, leads to a new Al-7.4Cu-1.6Fe-0.3Mn-0.2Zr alloy with creep resistance at 300 °C that surpasses known cast aluminum alloys. Adding Fe to improve the creep resistance of Al-Cu alloys is both cost-effective and sustainable. Our findings offer guidelines applicable to various alloy systems on controlling the evolution of precipitate-free zones and its ensuing effects on creep deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing quantification of MK6240 tau PET in unimpaired older adults

Accurate measurement of Alzheimer's disease (AD) pathology in older adults without significant clinical impairment is critical to assessing intervention strategies aimed at slowing AD-related cognitive decline. The U.S. Study to Protect Brain Health Through Lifestyle Intervention to Reduce Risk (POINTER) is a 2-year randomized controlled trial to evaluate the effect of multicomponent risk reduction strategies in older adults (60-79 years) who are cognitively unimpaired but at increased risk for cognitive decline/dementia due to factors such as cardiovascular disease and family history. The POINTER Imaging ancillary study is collecting tau-PET ([ 18 F]MK6240), beta-amyloid (Aβ)-PET ([ 18 F]florbetaben [FBB]) and MRI data to evaluate neuroimaging biomarkers of AD and cerebrovascular pathophysiology in this at-risk sample. Here 481 participants (70.0±5.0; 66% F) with baseline MK6240, FBB and structural MRI scans were included. PET scans were coregistered to the structural MRI which was used to create FreeSurfer-defined reference regions and target regions of interest (ROIs). We also created off-target signal (OTS) ROIs to examine the magnitude and distribution of MK6240 OTS across the brain as well as relationships between OTS and age, sex, and race. OTS was unimodally distributed, highly correlated across OTS ROIs and related to younger age and sex but not race. Aiming to identify an optimal processing approach for MK6240 that would reduce the influence of OTS, we compared our previously validated MRI-guided standard PET processing and 6 alternative approaches. The alternate approaches included combinations of reference region erosion and meningeal OTS masking before spatial smoothing as well as partial volume correction. To compare processing approaches we examined relationships between target ROIs (entorhinal cortex (ERC), hippocampus or a temporal meta-ROI (MetaROI)) SUVR and age, sex, race, Aβ and a general cognitive status measure, the Modified Telephone Interview for Cognitive Status (TICSm). Overall, the processing approaches performed similarly, and none showed a meaningful improvement over standard processing. Across processing approaches we observed previously reported relationships with MK6240 target ROIs including positive associations with age, an Aβ+> Aβ- effect and negative associations with cognition. In sum, we demonstrated that different methods for minimizing effects of OTS, which is highly correlated across the brain within subject, produced no substantive change in our performance metrics. This is likely because OTS contaminates both reference and target regions and this contamination largely cancels out in SUVR data. Caution should be used when efforts to reduce OTS focus on target or reference regions in isolation as this may exacerbate OTS contamination in SUVR data.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Quenching of single-particle strength inferred from nucleon-removal transfer reactions on 15 C

The difference in the proton and neutron separation energies (ΔS) of the weakly bound 15 C ground state is -19.86 MeV, an extreme value. Data from intermediate-energy heavy-ion induced (HI-induced) knockout reactions on nuclei spanning -20 ≲ ΔS ≲ +20 MeV, suggest that the degree to which single-particle strength is quenched, R s , has a negative correlation with ΔS, decreasing from unity around -20 MeV to around 0.2 at +20 MeV. For the 15 C ground state (R s = 0.96 (4) in HI-induced knockout), contrasting results have recently been obtained via the neutron-adding transfer reaction, which reveal a value of R s = 0.64 (15), similar to the value observed at modest and more extreme values of ΔS with reaction probes other than HI knockout. In order to explore the any potential differences between adding and removing processes in transfer reactions at extreme ΔS, single-neutron removal transfer reactions on 15 C were performed at 7.1 MeV/u in inverse kinematics. The removal of a valence neutron in 2s 1/2 orbit using both (p, d) and (d, t) reactions shows consistent quenching factors and agrees with those from the neutron-adding reaction. The present results, which can be compared with neutron knockout reaction, suggest that correlations, represented by the quenching factor, show limited dependence on neutron-proton asymmetry under the most extreme asymmetry conditions so far achieved in transfer reactions.

quenching factor↗
DOE OSTI2025

Sustainability perspectives of integrated pulp and paper biorefineries – A systematic critical review

As the pulp and paper industry is impacted by changing product demand trends, an opportunity arises to utilize existing pulp and paper mills (PPMs) and byproduct biomass to produce a wide range of value-added products, i.e., by converting existing PPMs into integrated pulp and paper biorefineries (IPPBs), a form of industrial symbiosis. In addition to the conventional products that a pulp and paper mill produces, IPPBs produce bio-based products that can help generate a new income stream. This paper provides a systematic critical review of IPPBs with a focus on the types of IPPBs and sustainability perspectives. Specifically, this review's objective is to identify and discuss current and emerging types of IPPBs, provide insights into the types of value-added products produced, and the opportunities and barriers they have according to published literature. We reviewed 97 articles and proposed a robust definition for IPPBs. The results show that there is a dominance of studying bioethanol as the main value-added product and black liquor as one of the main feedstocks. Additionally, we found that there are different types of market challenges for bioproducts depending on the conventional product being replaced and that location and policies play a crucial role. This review identified the limited sustainability focus on this topic and the crucial need to invest in new research to more thoroughly cover the environmental, economic, and social impacts of IPPBs.

Biorefinery pathways↗
DOE OSTI2021

Interpretable artificial intelligence and exascale molecular dynamics simulations to reveal kinetics: Applications to Alzheimer's disease

The rapid increase in computing power, especially with the integration of graphics processing units, has dramatically increased the capabilities of molecular dynamics simulations. To date, these capabilities extend from running very long simulations (tens to hundreds of microseconds) to thousands of short simulations. However, the expansive data generated in these simulations must be made interpretable not only by the investigator who performs them but also by others as well. Here, we demonstrate how integrating learning techniques, such as artificial intelligence, machine learning, and neural networks, into analysis pipelines can reveal the kinetics of Alzheimer's disease (AD) protein aggregation. Finally, we review select AD targets, describe current simulation methods, and introduce learning concepts and their application in AD, highlighting limitations and potential solutions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Enhanced, continuous, liquid-liquid extraction and in-situ separation of volatile fatty acids from fermentation broth

In 2018 alone, the US landfilled 35.3 million tons of food waste, about 24% of the total landfilled mass. In addition to the negative impacts landfills have demonstrated on the environment and human health, some states have begun to outlaw or dissuade the disposal of food waste and sewage sludge into landfills altogether. An urgent need has thus been created for the development of digestion processes like anaerobic digestion (AD) and arrested methanogenesis (AM) to convert food waste into valuable chemical products. Unfortunately, the buildup of volatile fatty acids (VFAs) during these processes eventually halts the reaction, and energy efficient methodologies for VFA removal are critical for the operation of fermenters. Additionally, VFAs themselves can serve as valuable chemical precursors, and recently AD processes have been modified to increase VFA production during fermentation. However, even with significant research over the past three decades, the separation of VFAs from the fermenter broth has remained expensive. Moreover, the separation of these VFAs from the fermenter broth may cost up to 50% of the entire process budget, hindering the widespread commercial adoption of AD and AM. Here we present a novel liquid-liquid extraction process termed CLEANS (Continuous Liquid-liquid Extraction And iN-situ Separation) as a highly efficient method for continuously separating VFAs from a real fermentation broth solely under gravity. Our optimized process (using an aqueous broth feed pH of 2.5, tri-noctylamine as an extractant, and a 10:1 ratio of aqueous broth to organic extractant), achieved a VFA distribution constant K D = 44.5 ± 7.9, a single-pass recovery = 81.3 ± 2.5%, and an extraction factor = 8.1 ± 0.3. These KD values are over an order of magnitude higher than what has been previously reported for comparable processes. A high aqueous-to-organic flowrate ratio, enabled for the first time by CLEANS, was found to be particularly crucial for achieving optimal extraction. Our separation process demonstrates excellent reproducibility and potential for scalability. The economic and environmental implications of this work are briefly discussed.

42 ENGINEERING↗
DOE OSTI2021

Root exudates shift how N mineralization and N fixation contribute to the plant-available N supply in low fertility soils

Nitrogen (N) availability is a primary constraint to plant productivity, especially in marginal lands with inherently low fertility. Root exudates change with plant nutrient status, and are expected to affect the microbially-mediated N transformations (gross N mineralization vs N fixation) in low fertility soil (low soil organic matter). To explore this possibility, we sampled soils from two monoculture switchgrass (var. Cave-In-Rock) plot with and without N addition at two marginal land sites in Michigan, USA. In a two-week lab incubation, we quantified the effect of different root exudates on gross N mineralization and N fixation by adding simulated root exudates (carbohydrates, organic acids) at a rate of 100 μg C g –1 day –1 . On average, adding carbohydrates to low fertility soil increased the soil respiration by 254%, the dissolved organic carbon (DOC) by 366% and reduced dissolved organic N (DON) by 40%. In contrast, soils receiving organic acids had 159% more soil respiration, 163% higher DOC concentration and the DON concentration increased by 49%. Analysis of the C recovery in measured pools revealed that root exudates C inputs were nearly equivalent to the DOC, microbial biomass carbon (MBC), and soil respiration in sandy soil, but only 45–74% of the root exudate C was recovered in these pools in the sandy loam soil. This suggests that root exudate C may be adsorbed to mineral particles in the sandy loam soil. Soil treated with organic acids had higher gross N mineralization and N immobilization rates than soil with carbohydrates addition. Adding carbohydrates significantly increased the free-living N fixation rates, compared to organic acid addition. Changes in soil pH, and DON induced by root exudate addition had strong association with N transformation rates and N availability. Gross N mineralization produced more plant-available N than N fixation, as evidenced by higher inorganic N concentration in soils receiving organic acids than carbohydrates. Here, by quantifying how different root exudates affect the contribution of N mineralization and N fixation to the plant-available N pool in low fertility soils, this study enhances our understanding of the “C for N” exchange in the plant rhizosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Improved valorization of sewage sludge in the circular economy by anaerobic digestion: Impact of an innovative pretreatment technology

Anaerobic digestion (AD) of sewage sludge shows low carbon conversion efficiency (CCE) due to the poor biodegradability of sewage sludge. Here, the lack of digestibility is specifically linked to the waste-activated sludge (WAS) making up the majority of sewage sludge along with a smaller portion of primary sludge, depending on the wastewater treatment plant configuration. In this study, we examine the Advanced Wet Oxidation & Steam Explosion process (AWOEx) for improving the CCE of digested sewage sludge (DSS) by thermophilic AD. The effect of the pretreatment temperature in the range between 160 and 185 °C at a fixed residence time of 20 min with and without oxygen added at a dosage of 5 % of the organics present was tested. Methane yield improved by 97.92 % to 183.91 ± 4.93 mL/g vS over the untreated DSS (control), whose methane yield was 92.92 ± 9.07 mL/g vS We have demonstrated for the first time that 84 % of the organics in sewage sludge can successfully be transformed into biogas following AWOEx pretreatment, which can contribute significantly to the circular economy instead of greenhouse gas emissions from landfilling.

09 BIOMASS FUELS↗
DOE OSTI2024

Anhydrous volatile fatty acid extraction through omniphobic membranes by hydrophobic deep eutectic solvents: Mechanistic understanding and future perspective

Volatile fatty acids (VFAs) derived from arrested anaerobic digestion (AD) can be recovered as a valuable commodity for value-added synthesis. However, separating VFAs from digestate with complex constituents and a high-water content is an energy-prohibitive process. This study developed an innovative technology to overcome this barrier by integrating deep eutectic solvents (DESs) with an omniphobic membrane into a membrane contactor for efficient extraction of anhydrous VFAs with low energy consumption. Here, a kinetic model was developed to elucidate the mechanistic differences between this novel omniphobic membrane-enabled DES extraction and the previous hydrophobic membrane-enabled NaOH extraction. Experimental results and mechanistic modeling suggested that VFA extraction by the DES is a reversible adsorption process facilitating subsequent VFA separation via anhydrous distillation. High vapor pressure of shorter-chain VFAs and low Nernst distribution coefficients of longer-chain VFAs contributed to DES-driven extraction, which could enable continuous and in-situ recovery and conversion of VFAs from AD streams.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Recycling of Nutrients from Dairy Wastewater by Extremophilic Microalgae with High Ammonia Tolerance

This study explored the possibility of incorporating extremophilic algal cultivation into dairy wastewater treatment by characterizing a unique algal strain. Results showed that extremophilic microalgae Chlorella vulgaris CA1 newly isolated from dairy wastewater tolerated a high level of ammonia nitrogen (2.7 g/L), which was over 20 times the ammonia nitrogen that regular Chlorella sp. could tolerate. The isolate was mixotrophically cultured in dairy effluent treated by anaerobic digestion (AD) for recycling nutrients and polishing the wastewater. The highest biomass content of 13.3 g/L and protein content of 43.4% were achieved in the culture in AD effluent. Up to 96% of the total nitrogen and 79% of the total phosphorus were removed from the dairy AD effluent. The ability of the algae to tolerate a high level of ammonia nitrogen suggests the potential for direct nutrient recycling from dairy wastewater while producing algal biomass and high value bioproducts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Comparative Life Cycle Evaluation of the Global Warming Potential (GWP) Impacts of Renewable Natural Gas Production Pathways

Renewable Natural Gas (RNG) sources are being considered in future energy strategy discussions as potential replacements for fossil natural gas (FNG). While today’s supply of RNG resources is insufficient to meet U.S. demands, there is significant interest in its viability to supplement and decarbonize the natural gas supply. However, the resources that compare the life cycle global warming potential (GWP) of various RNG production pathways are lacking and focus mostly on a singular pathway. This effort is an attempt to close this gap and provide a comparison between the life cycle GWP of three major RNG pathways and the FNG pathway. The three RNG pathways evaluated are Anaerobic Digestion (AD), Thermal Gasification (TG), and Power-to-Gas (P2G) using various feedstocks. The functional unit is 1MJ of compressed RNG ready for injection into the natural gas transmission network. The results show that RNG production is not always carbon neutral or negative. Depending on the pathway the GWP impact of RNG production can range from -229 to 27 g CO 2 e/MJ compressed RNG, with AD of animal manure and AD of municipal solid waste being the least and the most impactful pathways, respectively, compared to the 10.1 g CO 2 e/MJ impact for compressed FNG.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Spatially and Temporally Explicit Life Cycle Environmental Impacts of Soybean Production in the U.S. Midwest

Quantifying the spatially and temporally explicit life cycle environmental impacts of crop production is critical for designing sustainable supply chains for biofuel and animal sectors. This study assessed life cycle environmental impacts of soybean production in around 1000 Midwest counties over 9 years. A combination of Environmental Policy Integrated Climate model and process-based life cycle assessment model was used to estimate the spatially and temporally explicit life cycle global warming (GW), eutrophication (EU) and acidification (AD) impacts. Sequentially, a machine learning approach was applied to identify the top influential factors among soil, climate and farming practices for spatially and temporally explicit life cycle environmental impacts. The results indicated that significant variations existed in life cycle environmental impacts among counties and across years. Life cycle GW impacts ranged from -11.4 to 22.0 kg CO2-eq. kg soybean-1, whereas life cycle EU and AD impacts varied by a factor of 302 and 44, respectively. Nitrogen application rates, temperature in March and soil texture were the top influencing factors for the spatial-temporal variations in life cycle GW impacts. In contrast, soil organic content and nitrogen application rate were the top influencing factors for the spatial-temporal variations in life cycle EU and AD impacts.

Soybean, life cycle analysis, sustainability, spat↗
DOE OSTI2022

CO 2 Hydrogenation to Methanol over Inverse ZrO 2 /Cu(111) Catalysts: The Fate of Methoxy under Dry and Wet Conditions

Understanding the surface chemistry of CH 3 O species is essential for the production of methanol by CO 2 hydrogenation over Cu-based heterogeneous catalysts, as it facilitates the rational design of more efficient conversion processes. Recent research has identified inverse ZrO 2 /Cu catalysts as highly active and selective systems for the transformation of CO 2 to methanol with a performance that can be better than that of commercial Cu/ZnO catalysts. Here, we employed synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT) to understand the fate of CH 3 O groups under dry and wet environments. AP-XPS spectra revealed that under CO 2 hydrogenation conditions, formate and methoxy are two key intermediates to produce methanol. Furthermore, there are three different types of reactive sites on the surface: One is active for methoxy adsorption, which is stable and responsible for the methanol synthesis; Another one transforms CO 2 into CO; and a third one is active for CO 2 and methoxy dissociation, leading to C and methane formation. The theoretical calculations indicate that CH 3 OH readily dissociates to CH 3 O species following a highly exothermic (ΔE = -20.99 kcal/mol) and barrierless process. The water produced by the reverse water-gas shift reaction (CO 2 + H 2 → H 2 O + CO) can prevent the decomposition of CH 3 O species. We discovered that by introducing a tiny amount of water vapor (2 × 10 -6 Torr) into the reaction chamber, the energy barrier for the reaction CH 3 O(ads) + H(ads) → CH 3 OH(gas) is dramatically reduced. AP-XPS and computational modelling showed that water is quite capable of extracting adsorbed methoxy to form gaseous methanol. With this in mind, one could boost the methanol selectivity by adding appropriate amounts of water or steam, which is an inexpensive and feasible solution for industrial operations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modifying Interface Solvation and Oxygen Reduction Electrocatalysis with Hydrophobic Species

Ionic liquid interlayers improve the oxygen reduction reaction (ORR) kinetics on bulk and nanostructured catalysts for both Pt and alloyed-Pt materials. Despite the demonstrated performance enhancement at the half-cell and membrane electrode assembly level, the mechanism of the improvement is not fully understood. In this work, we combine single-crystal experiments with microkinetic modeling to uncover the origin of the ORR kinetic improvement on Pt(111) in the presence of ionic liquids and hydrophobic cations. With the incorporation of a modified Frumkin isotherm, our model accurately simulates the disorder–order transition observed in hydroxyl and bisulfate adsorption on Pt(111) under acidic conditions. Voltametric analysis shows that ionic liquids impact solvation to break so-called scaling relations between the adsorption strength of OH ad and O ad , but these effects have little impact on ORR activity. Instead, destabilized OH ad reduces the overall hydroxyl (spectator) coverage, resulting in higher availability of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interaction of Anisole on Alumina-Supported Ni and Mo Oxide Hydrodeoxygenation Catalysts

The conversion of biomass to transportation fuels and value-added chemicals is a promising method to reduce reliance on fossil fuels. Mo-based catalysts have been shown to be highly active in the hydrodeoxygenation of biomass-derived phenolic compounds. The catalyst active phase, surface species, and the effect of adding additional metals is not comprehensively understood. Here we compare the temperature-dependent adsorption behavior of the model compound anisole 2 on an alumina-supported mixed nickel molybdenum oxide catalyst with two reference catalysts of molybdenum oxide and nickel oxide. Raman spectroscopy showed that the catalysts contain significant amounts of molybdates and molybdoaluminates, in addition to NiMoO 4 in the nickel molybdenum catalyst and MoO 3 in the molybdenum-only catalyst. Using transmission infrared spectroscopy under a controlled environment, we find that anisole chemisorbed largely through the oxygen in the methoxy group to form surface-bound phenoxy and methoxy species on all the catalysts. Ambient pressure X-ray photoelectrons spectroscopy measurements of the catalysts in anisole vapor showed reduced Mo atoms are the binding sites. The surface interaction and removal temperature of these species varied with the metal composition. The MoO x component dominated the adsorption behavior in both MoO x and NiMoO x catalysts. The formation of new aromatics, including methylated rings, depended on Ni composition. Upon adding hydrogen to induce the hydrodeoxygenation of anisole, undesirable polynuclear aromatic species were quickly formed on the Mo-based catalysts. In conclusion, these results suggest that the molybdenum oxide controls the adsorption and reactivity of the surface species, with a cooperative effect by Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Screening of Cu-Based Catalysts for Selective Methane to Methanol Conversion

Developing selective catalysts for methane conversion to added value chemicals has been considered as a promising approach for efficient utilization of abundant natural gas resources. Here, we present a descriptor-based screening for high methane conversion and methanol selectivity at the interfaces between metal oxide clusters and Cu 2 O/Cu(111) support (MO x /Cu 2 O/Cu(111), M = Mg, Fe, Co, Ni, Cu, Zn, Ti, Zr, Sn, Ce) on exposure to the mixture of CH 4 /O 2 /H 2 O. Wherein, the activation energy of direct methane to methanol conversion, *OH + *CH 4 → *CH 3 OH + *H, and the ratio for adsorption energy of oxygen and water, E ads (O 2 )/E ads (H 2 O), are identified as the effective descriptor for methane conversion and methanol selectivity, respectively. Finally, by providing an exceptional oxygen and hydroxyl sites with high-lying O 2p states, the MgO/Cu 2 O/Cu(111) catalyst is found to be the most promising system among the systems studied, being able to provide the highest methane conversion with high methanol selectivity.

03 NATURAL GAS↗