Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time resolution data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Detection Of Tornado Damage Tracks With EOS Data

The damage surveys conducted by the NWS in the aftermath of a reported tornadic event are used to document the location of the tornado ground damage track (path length and width) and an estimation of the tornado intensity. This study explored the possibility of using near real-time medium and high-resolution satellite imagery from the NASA EOS satellites to provide additional information for the surveys. MODIS and ASTER data were used to study the damage tracks from three tornadic storms; the La Plata, Maryland storm of 28 April 2002 and the Carter-Butler Counties and Madison County Missouri storms of 24 April 2002. These storms varied in intensity (from F0-F4) and occurred over regions with different land use. It was found that, depending on the nature of land use, tornado damage tracks from intense storms (F2 or greater) may be evident in both ASTER and MODIS satellite imagery. In areas of dense vegetation the scar patterns show up very clearly, while in areas of grassland and regions with few trees, scar patterns are not at all obvious in the satellite imagery. The detection of previously unidentified segments of a damage track caused by the 24 April 2004 Madison County, Missouri tornado demonstrates the utility of satellite imagery for damage surveys. However, the capability to detect tornado tracks in satellite imagery appears to be as much dependent on the nature of the underlying surface and land use as on the severity of the tornadic storm. The imaging sensors on the NPOESS operational satellites to be launched in 2006 will continue the unique observing capabilities of the EOS instruments.

Jedlovec, Gary J.↗
NASA NTRS2012

Assessment of a Bidirectional Reflectance Distribution Correction of Above-Water and Satellite Water-Leaving Radiance in Coastal Waters

Water-leaving radiances, retrieved from in situ or satellite measurements, need to be corrected for the bidirectional properties of the measured light in order to standardize the data and make them comparable with each other. The current operational algorithm for the correction of bidirectional effects from the satellite ocean color data is optimized for typical oceanic waters. However, versions of bidirectional reflectance correction algorithms specifically tuned for typical coastal waters and other case 2 conditions are particularly needed to improve the overall quality of those data. In order to analyze the bidirectional reflectance distribution function (BRDF) of case 2 waters, a dataset of typical remote sensing reflectances was generated through radiative transfer simulations for a large range of viewing and illumination geometries. Based on this simulated dataset, a case 2 water focused remote sensing reflectance model is proposed to correct above-water and satellite water-leaving radiance data for bidirectional effects. The proposed model is first validated with a one year time series of in situ above-water measurements acquired by collocated multispectral and hyperspectral radiometers, which have different viewing geometries installed at the Long Island Sound Coastal Observatory (LISCO). Match-ups and intercomparisons performed on these concurrent measurements show that the proposed algorithm outperforms the algorithm currently in use at all wavelengths, with average improvement of 2.4% over the spectral range. LISCO's time series data have also been used to evaluate improvements in match-up comparisons of Moderate Resolution Imaging Spectroradiometer satellite data when the proposed BRDF correction is used in lieu of the current algorithm. It is shown that the discrepancies between coincident in-situ sea-based and satellite data decreased by 3.15% with the use of the proposed algorithm.

LISCO(LONG ISLAND SOUND COASTAL OBSERVATORY)↗
DOE OSTI2020

Completion design improvement using a deep convolutional network

Maximizing stimulated natural and hydraulic fracture network is one of the primary hydraulic fracturing concerns for economic production from a horizontal shale gas well. Geomechanical facies and preexisting fractures in each stage are identified based on similarities in formation characteristics to optimize the locations of perforation clusters. This often requires analyzing large volumes of drilling, Logging While Drilling (LWD) and Measurement While Drilling (MWD) data. In this paper, we develop a methodology that calculates the mechanical specific energy (MSE) using real-time drill string acceleration signals directly from its definition. High resolution vibration signals have been collected using a tri-axial accerlometer, which was an auxiliary tool included in acoustic borehole imager. This technique provides a cost-efficient solution for engineered completion design. Furthermore, we adopt deep Convolutional Neural Network (CNN) with signal processing to build a data pipeline that effectively extracts patterns from dynamic acceleration signals for rock lateral MSE classification. First, we apply discrete wavelet transform and Short-Time Fourier Transform (STFT) for signal denoising and pattern recognition. Then we construct an image dataset using multi-scale image fusion at pixel level from 3 sensor channels, including axial, lateral acceleration spectrograms and zero-padded revolutions per minute (RPM). The resulted RGB image dataset includes 4,000 images of 5 MSE ranges with various rock strength conditions. Our results demonstrate that the proposed deep learning model can achieve more than 90% classification accuracy. The deep learning results, as a reference source, were applied in selected Marcellus Shale Energy and Environmental Lab (MSEEL) wells engineered completion located in the Marcellus shale gas site.

03 NATURAL GAS↗
NASA NTRS2009

Monitoring Phenology as Indicator for Timing of Nutrient Inputs in Northern Gulf Watersheds

Nutrient over-enrichment defined by the U.S. Environmental Protection Agency as the anthropogenic addition of nutrients, in addition to any natural processes, causing adverse effects or impairments to the beneficial uses of a water body has been identified as one of the most significant environmental problems facing sensitive estuaries and coastal waters. Understanding the timing of nutrient inputs into those waters through remote sensing observables helps define monitoring and mitigation strategies. Remotely sensed data products can trace both forcings and effects of the nutrient system from landscape to estuary. This project is focused on extracting nutrient information from the landscape. The timing of nutrients entering coastal waters from the land boundary is greatly influenced by hydrologic processes, but can also be affected by the timing of nutrient additions across the landscape through natural or anthropogenic means. Non-point source nutrient additions to watersheds are often associated with specific seasonal cycles, such as decomposition of organic materials in fall and winter or addition of fertilizers to crop lands in the spring. These seasonal cycles or phenology may in turn be observed through the use of satellite sensors. Characterization of the phenology of various land cover types may be of particular interest in Gulf of Mexico estuarine systems with relatively short pathways between intensively managed systems and the land/estuarine boundary. The objective of this study is to demonstrate the capability of monitoring phenology of specific classes of land, such as agriculture and managed timberlands, at a refined watershed level. The extraction of phenological information from the Moderate Resolution Imaging Spectroradiometer (MODIS) data record is accomplished using analytical tools developed for NASA at Stennis Space Center: the Time Series Product Tool and the Phenological Parameters Estimation Tool. MODIS reflectance data (product MOD09) were used to compute the Normalized Difference Vegetation Index, which is sensitive to changes in vegetation canopies. The project team is working directly with the Mississippi Department of Environmental Quality to understand end-user requirements for this type of information product. Initial focus areas are identification of time frames for pre-plant fertilizer applications (prior to start of season), side-dress fertilizer applications (during rapid green-up), and periods of plant decomposition (during and after senescence). Prototypical maps of phenological stages related to these time frames have been generated for watersheds in the northern Gulf of Mexico. Where feasible, these maps have been compared to existing in situ nutrient monitoring data, but the in situ data is temporally sparse (monthly frequency or less), which makes interpretation challenging. Future work will include integrating effects of rainfall and seeking couplings with estuarine remote sensing.

Ross, Kenton W.↗
NASA NTRS1981

Mesoscale aspects of jet streak coupling and implications for the short term forecasting of severe convective storms

An analysis of a tornado outbreak in Wichita Falls, Texas was analyzed. The coupling of upper and lower tropospheric jet streaks, leading to severe storm outbreaks is illustrated. The high resolution SESAME data sets indicate that mass and momentum adjustments which couple upper and lower tropospheric jets occur within a 3 to 6 hr time frame over a 100 to 500 km domain, and establish the role of isallobaric forcing in the storm development. It is suggested that the output rate of data from the existing 12 hr network be increased to provide better temporal resolution of wind, mass and moisture data.

Uccellini, L. W.↗
NASA NTRS1999

Comparisons of Monthly Oceanic Rainfall Derived from TMI and SSM/I

A technique for estimating monthly oceanic rainfall rate using multi-channel microwave measurements has been developed. There are three prominent features of this algorithm. First, the knowledge of the form of the rainfall intensity probability density function used to augment the measurements. Second, utilizing a linear combination of the 19.35 and 22.235 GHz channels to de-emphasize the effect of water vapor. Third, an objective technique has been developed to estimate the rain layer thickness from the 19.35 and 22.235 GHz brightness temperature histograms. This technique is applied to the SSM/I data since 1987 to infer monthly rainfall for the Global Precipitation Climatology Project (GPCP). A modified version of this algorithm is now being applied to the TRMM Microwave Imager (TMI) data. TMI data with better spatial resolution and 24 hour sampling (vs. sun-synchronized sampling, which is limited to two narrow intervals of local solar time for DMSP satellites) prompt us to study the similarity and difference between these two rainfall estimates. Six months of rainfall data (January to June 1998) are used in this study. Means and standard deviations are calculated. Paired student t-tests are administrated to evaluate the differences between rainfall estimates from SSM/I and TMI data. Their differences are discussed in the context of global satellite rainfall estimation.

Chang, A. T. C.↗
NASA NTRS2000

Monthly Oceanic Rainfall Derived from Space-Borne Microwave Data

A technique for estimating monthly oceanic rainfall rate using multi-channel microwave measurements has been developed. This technique is applied to the Special Sensor Microwave Imager (SSM/I) data since 1987 to infer monthly rainfall for the Global Precipitation Climatology Project (GPCP). A modified version of this algorithm is now being applied to the TRMM Microwave Imager (TMI) data. There are three prominent features of this algorithm. First, the knowledge of the form of the rainfall intensity probability density function used to augment the measurements. Second, utilizing a linear combination of the 19.35 and 22.235 GHz channels to deemphasize the effect of water vapor. Third, an objective technique has been developed to estimate the rain layer thickness from the 19.35 and 22.23 5 GHz brightness temperature histograms, TMI data with better spatial resolution and 24 hour sampling (vs. sun-synchronized sampling, which is limited to two narrow intervals of local solar time for DMSP satellites) prompt us to study the similarity and difference between these two rainfall estimates. One year of rainfall data (January to December 1998) are used in this study. The mean differences of these two rain estimates are typically less than 15%. Statistical tests are administrated to evaluate the differences between rainfall estimates from SSM/I and TMI data. Differences between TMI and SSM/I rain estimates are discussed in the context of radiative transfer calculations and rainfall estimate algorithm.

Chang, Alfred T. C.↗
NASA NTRS1997

The Accuracy of Saccadic and Perceptual Decisions in Visual Search

Saccadic eye movements during search for a target embedded in noise are suboptimally guided by information about target location. Our goal is to compare the spatial information used to guide the saccades with that used for the perceptual decision. Three observers were asked to determine the location of a bright disk (diameter = 21 min) in white noise (signal-to-noise ratio = 4.2) from among 10 possible locations evenly spaced at 5.9 deg eccentricity. In the first of four conditions, observers used natural eye movements. In the three remaining conditions, observers fixated a central cross at all times. The fixation conditions consisted of three different presentation times (100, 200, 300 msec), each followed by a mask. Eye-position data were collected, with a resolution of (approximately) 0.2 deg. In the natural viewing condition, we measured. the accuracy with respect to the target and the latency of the first saccade. In the fixation conditions, we discarded trials in which observers broke fixation. Perceptual performance was computed for all conditions. Averaged across observers, the first saccade was correct (closest to the target location) for 56 +/- (SD) % of trials (chance = 10 %) and occurred after a latency of 313 +/- 56 msec. Perceptual performance averaged 53 +/- 4, 63 +/- 4, 65 +/- 2 % correct at 100, 200, and 300 msec, respectively. For the signal-to-noise ratio used, at the time of initiation of the first saccade, there is little difference between the amount of information about target location available to the perceptual and saccadic systems.

Eckstein, Miguel P.↗
NASA NTRS1995

Combined hyperspatial and hyperspectral imaging spectrometer concept

There is a user need for increasing spatial and spectral resolution in Earth Observation (EO) optical instrumentation. Higher spectral resolution will be achieved by the introduction of spaceborne imaging spectrometers. Higher spatial resolutions of 1 - 3m will be achieved also, but at the expense of sensor redesign, higher communications bandwidth, high data processing volumes, and therefore, at the risk of time delays due to large volume data-handling bottlenecks. This paper discusses a design concept whereby the hyperspectral properties of a spaceborne imaging spectrometer can be used to increase the image spatial resolution, without such adverse cost impact.

Burke, Ian↗
NASA NTRS2017

Importance of a Priori Vertical Ozone Profiles for TEMPO Air Quality Retrievals

Ozone (O3) is a toxic pollutant which plays a major role in air quality. Typically, monitoring of surface air quality and O3 mixing ratios is conducted using in situ measurement networks. This is partially due to high-quality information related to air quality being limited from space-borne platforms due to coarse spatial resolution, limited temporal frequency, and minimal sensitivity to lower tropospheric and surface-level O3. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite is designed to address the limitations of current space-based platforms and to improve our ability to monitor North American air quality. TEMPO will provide hourly data of total column and vertical profiles of O3 with high spatial resolution to be used as a near-real-time air quality product. TEMPO O3 retrievals will apply the Smithsonian Astrophysical Observatory profile algorithm developed based on work from GOME (Global Ozone Monitoring Experiment), GOME-2, and OMI (Ozone Monitoring Instrument). This algorithm is suggested to use a priori O3 profile information from a climatological data-base developed from long-term ozone-sonde measurements (tropopause-based (TB-Clim) O3 climatology). This study evaluates the TB-Clim dataset and model simulated O3 profiles, which could potentially serve as a priori O3 profile information in TEMPO retrievals, from near-real-time data assimilation model products (NASA GMAO's (Global Modeling and Assimilation Office) operational GEOS-5 (Goddard Earth Observing System, Version 5) FP (Forecast Products) model and reanalysis data from MERRA2 (Modern-Era Retrospective analysis for Research and Applications, Version 2)) and a full chemical transport model (CTM), GEOS-Chem. In this study, vertical profile products are evaluated with surface (0-2 kilometers) and tropospheric (0-10 kilometers) TOLNet (Tropospheric Ozone Lidar Network) observations and the theoretical impact of individual a priori profile sources on the accuracy of TEMPO O3 retrievals in the troposphere and at the surface are presented. Results indicate that while the TB-Clim climatological dataset can replicate seasonally-averaged tropospheric O3 profiles, model-simulated profiles from a full CTM resulted in more accurate tropospheric and surface-level O3 retrievals from TEMPO when compared to hourly and daily-averaged TOLNet observations. Furthermore, it is shown that when large surface O3 mixing ratios are observed, TEMPO retrieval values at the surface are most accurate when applying CTM a priori profile information compared to all other data products.

Priori↗
NASA NTRS2002

Estimation of Rainfall Sampling Uncertainty: A Comparison of Two Diverse Approaches

The spatial and temporal intermittence of rainfall causes the averages of satellite observations of rain rate to differ from the "true" average rain rate over any given area and time period, even if the satellite observations are perfectly accurate. The difference of satellite averages based on occasional observation by satellite systems and the continuous-time average of rain rate is referred to as sampling error. In this study, rms sampling error estimates are obtained for average rain rates over boxes 100 km, 200 km, and 500 km on a side, for averaging periods of 1 day, 5 days, and 30 days. The study uses a multi-year, merged radar data product provided by Weather Services International Corp. at a resolution of 2 km in space and 15 min in time, over an area of the central U.S. extending from 35N to 45N in latitude and 100W to 80W in longitude. The intervals between satellite observations are assumed to be equal, and similar In size to what present and future satellite systems are able to provide (from 1 h to 12 h). The sampling error estimates are obtained using a resampling method called "resampling by shifts," and are compared to sampling error estimates proposed by Bell based on earlier work by Laughlin. The resampling estimates are found to scale with areal size and time period as the theory predicts. The dependence on average rain rate and time interval between observations is also similar to what the simple theory suggests.

Steiner, Matthias↗
DOE OSTI2022

Ocean circulation and climate variability in the northern South China Sea during the Greek Minimum derived from coral Δ 14 C and Sr/Ca records

Ocean circulation transports heat, salt and nutrients, and has profound impacts on the marine environment and climate change. However, the seasonal to centennial variations of the paleocirculation of the South China Sea (SCS) and their driving forces are still unclear due to limited records. Here we reconstructed a high-resolution Δ 14 C record of a coral from Sanya to investigate the seasonal variations of the SCS ocean circulation around 2300 cal yr BP during a grand solar minimum (GSM) period. The seasonal Δ 14 C variability shows the influence of coastal upwelling caused by the East Asian Summer Monsoon (EASM) in summer and the effect of water intrusion from the western Pacific Ocean driven by the Kuroshio Intrusion (KI) in winter. Here we compiled the marine radiocarbon reservoir correction (ΔR) records since 2500 cal yr BP, which indicate a gradual decrease of upwelling significantly correlated with the EASM. Comparisons with other climate records suggest that both the EASM and KI may regulate the ocean circulation variability on centennial time scales. As a good index of the sea surface temperature (SST), our Sr/Ca record and spectral analysis results show a low temperature and a low frequency of El Niño-Southern Oscillation (ENSO) events around 2300 cal yr BP. Moreover, the composite coral Sr/Ca-SST and ENSO index records since 2500 cal yr BP show relatively low SST and weak ENSO during GSMs, supporting the modulation of tropical SST and ENSO by solar activity. Our study has provided high-resolution proxy data and revealed the driving forces of ocean circulation and climate change in the SCS at multiple time scales, which should be considered in further modeling work.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

PACE Technical Report Series, Volume 7: Ocean Color Instrument (OCI) Concept Design Studies

Extending OCI hyperspectral radiance measurements in the ultraviolet to 320 nm on the blue spectrograph enables quantitation of atmospheric total column ozone (O3) for use in ocean color atmospheric correction algorithms. The strong absorption by atmospheric ozone below 340 nm enables the quantification of total column ozone. Other applications are possible but were not investigated due to their exploratory nature and lower priority.The first step in the atmospheric correction processing, which converts top-of-the-atmosphere radiances to water-leaving radiances, is removal of the absorbance by atmospheric trace gases such as water vapor, oxygen, ozone and nitrogen dioxide. Details of the atmospheric correction process currently used by the Ocean Biology Processing Group (OBPG) and will be employed for PACE with appropriate modifications, are described by Mobley et al. [2016]. Atmospheric ozone absorbs within the visible to near-infrared spectrum between ~450 nm and 800nm and most appreciably between 530 nm and 650 nm, a spectral region critical for maintaining NASA's chlorophyll-a climate data record and for PACE algorithms planned to characterize phytoplankton community composition and other ocean color products.While satellite-based observations will likely be available during PACE's mission lifetime, the difference in acquisition time with PACE, the coarseness in their spatial resolution, and differences in viewing geometries will introduce significant levels of uncertainties in PACE ocean color data products.

Cetinic, Ivona↗
NASA NTRSDate not supplied

Compressive Sensing Application for Transient Photometric Measurements

Compressive Sensing (CS) is a mathematical theory for simultaneous data acquisition and compression. Natural phenomena may be sparse in some physical or temporal domain. If we exploit this sparsity by applying the technique of CS to obtain information, how do our measurements change as a function of domain and measurement systematics? What are the specific implications for the science and for the sensing infrastructure? In this talk, we will discuss the generalized systematic effects consequent to the application of CS to time-series photometric measurements. We assess implications for observability, sparsification, and information loss in the detection, retrieval and reconstruction process. To study time-series photometry, we explore the field of gravitational microlensing. A source star, typically in the galactic bulge, gets microlensed when there is a precise alignment of a lensing star and its planetary system, with the source star. The microlensed source star changes in flux magnification as the lensing system crosses the precise path of alignment, resulting in a microlensing curve in time domain. A high-cadence, high-resolution system, which uses low power and bandwidth is essential to obtain valuable science measurements. Hence, we discuss application of CS to gravitational microlensing data sets, which in turn can be generalized to any time-ordered photometric measurements.

Asmita Abhay Korde↗
NASA NTRS1982

Inductive electric field at the magnetopause

The electric field data for two crossings of the magnetopause by ISEE-1 on November 20, 1977, have been analyzed with high time resolution. In both cases the electric field has a negative dawn-dusk component in the boundary layer, so it must reverse somewhere within the current layer to the positive value outside. If there is a component parallel to the moving magnetopause current it is small, and by no means obvious. In the case of the exit crossing from the boundary layer to the magnetosheath the data show that the electric field vector is turning for about two seconds at roughly the satellite spin rate; this changing direction suggests that the electric field has a curl. Such a curl could be caused by a travelling localized perturbation of the magnetopause surface current associated with impulsive plasma transport through the magnetopause.

Heikkila, W. J.↗
NASA NTRSDate not supplied

Comparing Satellite Measurements of Volcanic SO2 Mass from OMI, OMPS and TROPOMI

Sulfur dioxide (SO2) is a major air pollutant that contributes to acid rain and aerosol formation (e.g., sulfates), adversely affects the environment and human health, and explosive volcanic SO2 emissions can impact climate. The majority of SO2 emissions are related to anthropogenic processes (e.g., fossil fuel burning, metal ore smelting operations), although natural processes such as volcanic eruptions and degassing also play an important role as anthropogenic SO2 emissions continue to decline. Generally, the most interest in volcanoes occurs during major eruptions. We will focus on comparing volcanic SO2 outgassing that occurs on an almost daily basis from lesser known volcanoes using satellite data. At NASA’s Global Sulfur Dioxide Monitoring Home page (https://so2.gsfc.nasa.gov/), we have been posting daily SO2 maps from 40 volcanic and industrial regions around the world using measurements from three satellite instruments; the Ozone Monitoring Instrument (OMI) onboard NASA’s Earth Observing System Aura satellite, the Ozone Monitoring and Profiler Suite (OMPS) onboard the NASA-NOAA Suomi National Polar-orbiting Partnership (NPP) satellite, and the TROPOspheric Monitoring Instrument (TROPOMI) onboard the ESA/Copernicus Sentinel-5 Precursor satellite. These instruments in low Earth sun-synchronous polar orbits with 1:30-2:00 pm equator crossing local time provide daily SO2 maps at different spatial resolutions: 13 x 24 km2, 50 x 50 km2 and 5.5 x 3.5 km2 for OMI, OMPS and TROPOMI respectively. Data from OMI are available since October 2004 (partial coverage since 2008), from OMPS since 2012 and from TROPOMI since 2018. We will present comparative SO2 mass time-series (see Hunga-Tonga plot) and statistical analyses of recent eruptions that have data from all the instruments.

SO2↗
NASA NTRS1997

Alaskan Auroral All-Sky Images on the World Wide Web

In response to a 1995 NASA SPDS announcement of support for preservation and distribution of important data sets online, the Geophysical Institute, University of Alaska Fairbanks, Alaska, proposed to provide World Wide Web access to the Poker Flat Auroral All-sky Camera images in real time. The Poker auroral all-sky camera is located in the Davis Science Operation Center at Poker Flat Rocket Range about 30 miles north-east of Fairbanks, Alaska, and is connected, through a microwave link, with the Geophysical Institute where we maintain the data base linked to the Web. To protect the low light-level all-sky TV camera from damage due to excessive light, we only operate during the winter season when the moon is down. The camera and data acquisition is now fully computer controlled. Digital images are transmitted each minute to the Web linked data base where the data are available in a number of different presentations: (1) Individual JPEG compressed images (1 minute resolution); (2) Time lapse MPEG movie of the stored images; and (3) A meridional plot of the entire night activity.

Stenbaek-Nielsen, H. C.↗
NASA NTRS2016

Observations of Turbulence in a Kelvin-Helmholtz Event on 8 September 2015 by the Magnetospheric Multiscale Mission

Spatial and high-time-resolution properties of the velocities, magnetic field, and 3-D electric field within plasma turbulence are examined observationally using data from the Magnetospheric Multiscale mission. Observations from a Kelvin-Helmholtz instability (KHI) on the Earth's magnetopause are examined, which both provides a series of repeatable intervals to analyze, giving better statistics, and provides a first look at the properties of turbulence in the KHI. For the first time direct observations of both the high-frequency ion and electron velocity spectra are examined, showing differing ion and electron behavior at kinetic scales. Temporal spectra exhibit power law behavior with changes in slope near the ion gyrofrequency and lower hybrid frequency. The work provides the first observational evidence for turbulent intermittency and anisotropy consistent with quasi two-dimensional turbulence in association with the KHI. The behavior of kinetic-scale intermittency is found to have differences from previous studies of solar wind turbulence, leading to novel insights on the turbulent dynamics in the KHI.

Stawarz, J. E.↗