Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface waters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Solution‐Like Water Transport Across Molecular to Macroscopic Length Scales in Crosslinked Poly(Ethylene Glycol Diacrylate) Networks With Tailored Sidechains

Poly(ethylene glycol) (PEG)‐based materials, like PEG‐diacrylate (PEGDA), are prized for their hydrophilic, inert properties, and leveraged in hydrogels and as membrane mimics. While network chemistry is often tuned for selective transport and antifouling, fundamental understanding of water dynamics at the network surface and the impact on bulk transport is limited. We utilize Overhauser dynamic nuclear polarization (ODNP) to measure nanoscale water diffusivity near a tethered spin label at the water‐polymer surface and compare it to bulk water diffusivity from pulsed field gradient (PFG) NMR. Via active ester chemistry, spin labels and varied sidechain chemistries are introduced, modulating network hydrophilicity. Tuning network hydration through crosslinker content and functional groups further impacts water diffusivity. Results show rapid nanoscale water transport at the polymer surface, reflecting network volumetric water content, with further modulation by sidechain functionality. These findings demonstrate PEGDA's utility as a membrane mimic and the critical impact of network chemistry on water transport.

hydrogels↗
DOE OSTI2020

The Effect of Adsorbed Volatile Organic Compounds on an Ultrathin Water Film Measurement

Using surface plasmon resonance imaging (SPRi), we have recently shown for the first time the existence of a monolayer water film between droplets during dropwise condensation. This study examines the effect of adsorbed volatile organic compounds (VOCs) on the ultrathin film measurement using SPRi. Further, the work presents the proper surface-treatment process that enables measurements of the ultrathin water layer during high-speed imaging of dropwise condensation at 3000 frame per second. In this study, two methods were applied for cleaning the surface (gold-coated glass)—(1) standard cleaning procedure (SCP) using acetone, isopropyl alcohol, and deionized water and (2) SCP followed by air plasma cleaning. This work discusses the effect of the cleaning procedures on surface roughness, contact angle, and surface chemistry using atomic force microscopy, optical microscopy, and an X-ray photoelectron spectroscope meter. The results showed that SCP before the SPRi is a proper surface-treatment method. The effect of adsorbed VOCs during dropwise condensation on a surface treated with SCP was measured to be 0.0025 (reflectivity unit), which was 70% smaller than the reflectance associated with a monolayer water film. The results of this work confirm a monolayer water film observation during the dropwise condensation, which has been reported before.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Fast-Track Water Oxidation Channel on BiVO 4 Opened by Nitrogen Treatment

BiVO 4 is one of the most promising photoanode materials for water-splitting systems. Nitrogen incorporation into a BiVO 4 surface overcomes the known bottleneck in its charge-transfer kinetics into the electrolyte. We explored the role of nitrogen in the surface charge recombination and charge-transfer kinetics by employing transient photocurrent spectroscopy at the time scale of surface recombination and water oxidation kinetics, transient absorption spectroscopy, and X-ray photoelectron spectroscopy. We attributed the activity enhancement mechanism to the accelerated V 5+ /V 4+ redox process, in which incorporated nitrogen suppresses a limiting surface recombination channel by increasing the oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ Polymerization of Polypyrrole and Polyaniline on the Surface of Magnetic Molybdenum Trioxide Nanoparticles: Implications for Water Treatment

Photocatalyst dissolution greatly diminishes the usability of photocatalysts in water treatments. Coating conductive polymers on the surface of photocatalysts can reduce dissolution without compromising the photocatalytic properties of the material. In this investigation, polypyrrole (PPy) and polyaniline (PANI) were used to coat two magnetic MoO 3 nanoparticles with different surface chemistries. The polymer-coated MoO 3 @Fe 3 O 4 nanoparticles were synthesized by optimizing the mole fractions of PPy or PANI, MoO 3 , and Fe 3 O 4 . The optimized PPy@ MoO 3 @Fe 3 O 4 (PMF1) and PANI@MoO 3 @Fe 3 O 4 (PMF2) resulted in 95.39 and 75.98% methylene blue dye removal, respectively. MoO 3 dissolutions of 4.12 and 5.6% were obtained for PMF1 and PMF2, respectively, demonstrating the reduced solubility of the coated nanoparticles as compared to their uncoated counterparts (7.87% for MF1 and 18.1% for MF2). In situ small-angle neutron scattering (SANS) was utilized to investigate the polymerization kinetics of PPy and PANI on nanoparticles. The results revealed that an increase in base material oxygen vacancies resulted in the reduction of both the polymer size and the polymerization rate. Furthermore, this study demonstrated that SANS provides valuable insights into the polymer growth mechanisms on nanoparticle surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Design and characterization of surface molecular assemblies for the preparation of solar fuels

A key issue in solar energy conversion is the utilization of solar energy for the preparation of solar fuels. In this area, artificial photosynthesis offers promising approaches for the conversion of H 2 O and CO 2 into usable solar fuels. This review highlights both the design and characterization of surface molecular assemblies for the preparation of solar fuels. It includes mechanistic summaries of the details of the underlying surface chemical reactions including water oxidation and proton/water reduction. The surface mechanisms are shown to integrate molecular reactivity with surface electron transfer in integrated assemblies that lead to impressive efficiencies for water oxidation and proton or CO 2 reduction.

catalysts and catalysis↗
DOE OSTI2023

Elucidating the water–anatase TiO 2 (101) interface structure using infrared signatures and molecular dynamics

The structure and dynamics of water on solid surfaces critically affect the chemistry of materials in ambient and aqueous environments. Here, we investigate the hydrogen bonding network of water adsorbed on the majority (101) surface of anatase TiO 2 , a widely used photocatalyst, using polarization- and azimuth-resolved infrared spectroscopy combined with neural network potential molecular dynamics simulations. Our results show that one monolayer of water saturates the undercoordinated titanium (Ti 5c ) sites, forming one-dimensional chains of molecule hydrogen bonded to surface undercoordinated bridging oxygen (O 2c ) atoms. As the coverage increases, water adsorption on O 2c sites leads to significant restructuring of the water monolayer and the formation of a two-dimensional hydrogen bond network characterized by tightly bound pairs of water molecules on adjacent Ti 5c and O 2c sites. This structural motif likely persists at ambient conditions, influencing the reactions occurring there. In conclusion, the results reported here provide critical details of the structure of the water–anatase (101) interface that were previously hypothesized but unconfirmed experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Biogeophysical Effects of Land-Use and Land-Cover Change Not Detectable in Warmest Month

Land-use and land-cover changes (hereafter simply “land use”) alter climates biogeophysically by affecting surface fluxes of energy and water. Yet, near-surface temperature responses to land use across observational versus model-based studies and spatial-temporal scales can be inconsistent. Here we assess the prevalence of the historical land use signal of daily maximum temperatures averaged over the warmest month of the year (t LU ) using regularized optimal fingerprinting for detection and attribution. We use observations from the Climatic Research Unit and Berkeley Earth alongside historical simulations with and without land use from phase 6 of the Coupled Model Intercomparison Project to reconstruct an experiment representing the effects of land use on climate. To assess the signal of land use at spatially resolved continental and global scales, we aggregate all input data across reference regions and continents, respectively. At both scales, land use does not comprise a significantly detectable set of forcings for two of four Earth system models and their multimodel mean. Furthermore, using a principal component analysis, we find that t LU is mostly composed of the nonlocal effects of land use rather than its local effects. These findings show that, at scales relevant for climate attribution, uncertainties in Earth system model representations of land use are too high relative to the effects of internal variability to confidently assess land use.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Toward High Efficiency Water Processed Organic Photovoltaics: Controlling the Nanoparticle Morphology with Surface Energies

Here efficient organic photovoltaic devices fabricated from water-based colloidal dispersions with donor:acceptor composite nanoparticles achieving up to 9.98% power conversion efficiency (PCE) are reported. This high efficiency for water processed organic solar cells is attributed to morphology control by surface energy matching between the donor and the acceptor materials. Indeed, due to a low interfacial energy between donor and the acceptor, no large phase separation occurs during the nanoparticle formation process as well as upon thermal annealing. Indeed, synchrotron-based scanning transmission X-ray microscopy reveals that the internal morphology of composite nanoparticles is intermixed as well as the active layer morphology after thermal treatment. The PCE of this system reaches 85% that of devices prepared from chlorinated solvent. The gap between water-based inks and organic solvent-based inks gets narrower, which is promising for the development of eco-friendly processing and fabrication of organic photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2021

Idealized Large-Eddy Simulations of Stratocumulus Advecting over Cold Water. Part I: Boundary Layer Decoupling

Abstract We explore the decoupling physics of a stratocumulus-topped boundary layer (STBL) moving over cooler water, a situation mimicking warm-air advection (WADV). We simulate an initially well-mixed STBL over a doubly periodic domain with the sea surface temperature decreasing linearly over time using the System for Atmospheric Modeling large-eddy model. Due to the surface cooling, the STBL becomes increasingly stably stratified, manifested as a near-surface temperature inversion topped by a well-mixed cloud-containing layer. Unlike the stably stratified STBL in cold-air advection (CADV) that is characterized by cumulus coupling, the stratocumulus deck in the WADV is unambiguously decoupled from the sea surface, manifested as weakly negative buoyancy flux throughout the subcloud layer. Without the influxes of buoyancy from the surface, the convective circulation in the well-mixed cloud-containing layer is driven by cloud-top radiative cooling. In such a regime, the downdrafts propel the circulation, in contrast to that in CADV regime for which the cumulus updrafts play a more determinant role. Such a contrast in convection regime explains the difference in many aspects of the STBLs including the entrainment rate, cloud homogeneity, vertical exchanges of heat and moisture, and lifetime of the stratocumulus deck, with the last being subject to a more thorough investigation in Part II. Finally, we investigate under what conditions a secondary stratus near the surface (or fog) can form in the WADV. We found that weaker subsidence favors the formation of fog whereas a more rapid surface cooling rate does not. Significant Statement The low-lying blanketlike clouds, called stratocumulus (Sc), reflect much incoming sunlight, substantially modulating Earth’s temperature. While much is known about how the Sc evolves when it moves over warmer water, few studies examine the opposite situation of Sc moving over colder water. We used a high-resolution numerical model to simulate such a case. When moving over cold water, the Sc becomes unambiguously decoupled from the water surface, distinctive from its warm counterpart in which the Sc interacts with the water surface via intermittent cauliflower-like clouds called cumulus clouds. Such decoupling influences many aspects of the Sc–sea surface system, which combine to alter the ability of the Sc to reflect sunlight, thereby influencing the climate. This work laid the foundation for future work that quantifies the contribution of such a decoupled Sc regime to Earth’s radiative budget and climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Perovskite Catalysts for Pure-Water-Fed Anion-Exchange-Membrane Electrolyzer Anodes: Co-design of Electrically Conductive Nanoparticle Cores and Active Surfaces

Anion-exchange-membrane water electrolyzers (AEMWEs) are a possible low-capital-expense, efficient, and scalable hydrogen-production technology with inexpensive hardware, earth-abundant catalysts, and pure water. However, pure-water-fed AEMWEs remain at an early stage of development and suffer from inferior performance compared with proton-exchange-membrane water electrolyzers (PEMWEs). One challenge is to develop effective non-platinum-group-metal (non-PGM) anode catalysts and electrodes in pure-water-fed AEMWEs. We show how LaNiO3-based perovskite oxides can be tuned by cosubstitution on both A- and B-sites to simultaneously maintain high metallic electrical conductivity along with a degree of surface reconstruction to expose a stable Co-based active catalyst. The optimized perovskite, Sr0.1La0.9Co0.5Ni0.5O3, yielded pure-water AEMWEs operating at 1.97 V at 2.0 A cm-2 at 70 °C with a pure-water feed, thus illustrating the utility of the catalyst design principles.

Zhai, Tingting↗
DOE OSTI2023

Nucleation dependence of atomic layer deposition on diamond surface termination

Surface termination and interfacial interactions are critical for advanced solid-state quantum applications. Here, in this paper, we demonstrate that atomic layer deposition (ALD) can both provide valuable insight on the chemical environment of the surface, having sufficient sensitivity to distinguish between the common diamond (001) surface termination types and passivate these interfaces as desired. We selected diamond substrates exhibiting both smooth and anomalously rough surfaces to probe the effect of morphology on ALD nucleation. We use high resolution in situ spectroscopic ellipsometry to monitor the surface reaction with sub-angstrom resolution, to evaluate the nucleation of an ALD Al 2 O 3 process as a function of different ex and in situ treatments to the diamond surface. In situ water dosing and high vacuum annealing provided the most favorable environment for nucleation of dimethylaluminum isopropoxide and water ALD. Hydrogen termination passivated both smooth and rough surfaces while triacid cleaning passivated the smooth surface only, with striking effectiveness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Permafrost Promotes Shallow Groundwater Flow and Warmer Headwater Streams

Abstract The presence of permafrost influences the flow paths of water through Arctic landscapes and thereby has the potential to impact stream discharge and thermal regimes. Observations from 11 headwater streams in Alaska showed that July water temperatures were higher in catchments with more near‐surface permafrost. We apply a fully coupled cryohydrology model to investigate if the impact of permafrost on flow path depth could cause the same pattern in temperatures of groundwater discharging from hillslopes to streams. The model simulates surface energy and water balances, snow, and subsurface water and energy balances for two‐dimensional hillslope model cases with varying permafrost extent. We find that hillslopes with continuous permafrost have more shallow flow paths and twice as high rates of evapotranspiration, compared to hillslopes with no permafrost. For our simulated cases, 6.7% of the horizontal water flux moves through the top organic soil layers when there is continuous permafrost, while only 0.5% moves through organic layers without permafrost. The deeper flow paths in permafrost‐free simulations buffer seasonal temperature extremes, so that summer groundwater discharge temperatures are highest with continuous permafrost. Our results suggest that permafrost thawing alters groundwater flow paths and can lead to decreases in summer stream temperatures and reductions in evapotranspiration in headwater catchments. These changes are of potential importance for stream biotic components of ecosystems, however, the full impact remains unknown.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Wetting of a Hydrophobic Surface: Far-IR Action Spectroscopy and Dynamics of Microhydrated Naphthalene

The interaction of water and polycyclic aromatic hydrocarbons is of fundamental importance in areas as diverse as materials science and atmospheric and interstellar chemistry. The interplay between hydrogen bonding and dipole–π interactions results in subtle dynamics that are challenging to describe from first principles. Here, we employ far-IR action vibrational spectroscopy with the infrared free-electron laser FELIX to investigate naphthalene with one to three water molecules. We observe diffuse bands associated with intermolecular vibrational modes that serve as direct probes of the loose binding of water to the naphthalene surface. These signatures are poorly reproduced by static DFT or Møller–Plesset computations. Instead, a rationalization is achieved through Born–Oppenheimer Molecular Dynamics simulations, revealing the active mobility of water over the surface, even at low temperatures. Therefore, our work provides direct insights into the wetting interactions associated with shallow potential energy surfaces while simultaneously demonstrating a solid experimental–computational framework for their investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Managing Tritium in Water.

Fermilab’s program to monitor and manage low levels of tritium in surface and sewer water on the laboratory site.

Fermilab, Fermilab↗
DOE OSTI2024

Electrical Resistivity Tomography Monitoring of In Situ Soil Flushing at the Hanford 100-K East Area: 100KE Soil Flushing Monitoring

Former operations in the 100-KE Area at the Hanford Site resulted in vadose zone hexavalent chromium that provides a source of groundwater contamination. Previous efforts to remediate vadose zone chromium involved excavation and offsite treatment of contaminated soils. Although much of the chromium was removed, contamination still exists in native soil between the water table and the bottom of the pit, which has since been backfilled. In-situ soil flushing was tested at the 100-KE Area to accelerate the removal of the remaining hexavalent chromium in the vadose zone. Soil flushing works by applying clean flush water at the surface, which mobilizes and transports chromium as it migrates downward to the water table. Once the chromium reaches the water table, it is hydraulically contained, extracted, and treated through pump and treat operations. The efficacy of soil flushing is directly related to the volume of clean water that infiltrates through contaminated soils. Therefore, performance monitoring requires and understanding of flush water migration through the vadose zone. It is challenging to comprehensively assess soil flushing performance via borehole access due to the limited volume of investigation afforded by a given wellbore. As an alternative, 3D time-lapse electrical resistivity tomography (ERT) was tested as a method of monitoring the distribution of flush water over time within the vadose zone. ERT is a method of imaging the bulk electrical conductivity of the subsurface, which is highly dependent on water saturation levels in unconsolidated and unsaturated sediments. Thus, the timing and location of changes in bulk conductivity caused by soil flushing can be used to infer flush water migration pathways. In this report we present results of 3D time-lapse ERT imaging during two separate soil flushing campaigns conducted during the spring and summer months of 2022 and 2023. Results show generally that: 1) Pit backfill materials appear to nominally have larger permeability than native soils. Consequently, the boundary between pit backfill and native soil had a significant impact on flush water migration, causing some flush water to migrate along the pit boundary to the bottom of the pit. 2) Non-uniform flows, likely caused by variations in hydrogeologic properties, developed in the pit backfill materials, resulting in uneven flush water distribution on the southern margin of the soil flushing zone. 3) Redistribution of water at the interface between backfill materials and Hanford formation materials likely facilitated elevated and uniform distribution of flush water within native soils beneath the deeper parts of the pit boundary beneath the center of the flush zone, which presumably overlie soils with elevated chromium contamination. These areas appear to have been infiltrated by higher volumes of flush water than the northern and southern margins of the flush zone. 4) In comparison to 2022, high flush water application rates significantly improved flush water distribution throughout the target flushing zone. 5) Imaging resolution was limited to a depth of approximate 20 meters below the land surface, due primarily to limitations on the lateral extent of the surface ERT array. The ~10 m region of the vadose zone between approximately 130 meters elevation and the water table at approximately 120 meters elevation was unresolved.

100 Area↗
DOE OSTI2025

Adsorption of REEs to Kaolinite via Ion Exchange and Surface Complexation as a Function of Water Chemistry

Rare earth elements (REEs) are critical components of modern technology behind renewable energy, transportation, and electronics but have a limited current supply. A substantial portion of global REE production relies on ion adsorption deposits. A high abundance of kaolinite in REE enrichment zones within these deposits suggests that kaolinite controls the subsurface migration of REEs. This study aimed to improve the current understanding of REE binding to kaolinite under varying water chemistry conditions. We conducted batch experiments with kaolinite (KGa-2) and three REEs (Nd, Dy, and Yb) at varying pH, electrolyte concentration, dissolved inorganic carbon (DIC), low molecular weight organic acids (citric and oxalic acids), and total REE concentration conditions. Increasing electrolyte concentration inhibits REE adsorption at pH < 7, suggesting that ion exchange contributes to adsorption at these pH values. DIC affects adsorption above pH 7–8 by forming strong aqueous complexes with heavy REEs. Citric acid decreases REE adsorption via aqueous complexation of REEs at pH > 5 but does not affect adsorption at pH < 5. The surface complexation model captures the main adsorption trends with two mechanisms: ion exchange on basal planes at pH < ∼6 and inner-sphere surface complexation to edge sites at pH > ∼6. Equilibrium constants for surface complexation increase in the order of Yb > Dy > Nd, indicating a higher strength of adsorption for heavy REEs. This study demonstrates how water chemistry conditions control the adsorption mechanisms that may determine the mobility of REEs in subsurface environments rich in kaolinite.

58 GEOSCIENCES↗
DOE OSTI2021

The effect of water on colloidal quantum dot solar cells

Almost all surfaces sensitive to the ambient environment are covered by water, whereas the impacts of water on surface-dominated colloidal quantum dot (CQD) semiconductor electronics have rarely been explored. Here, strongly hydrogen-bonded water on hydroxylated lead sulfide (PbS) CQD is identified. The water could pilot the thermally induced evolution of surface chemical environment, which significantly influences the nanostructures, carrier dynamics, and trap behaviors in CQD solar cells. The aggravation of surface hydroxylation and water adsorption triggers epitaxial CQD fusion during device fabrication under humid ambient, giving rise to the inter-band traps and deficiency in solar cells. To address this problem, meniscus-guided-coating technique is introduced to achieve dense-packed CQD solids and extrude ambient water, improving device performance and thermal stability. Our works not only elucidate the water involved PbS CQD surface chemistry, but may also achieve a comprehensive understanding of the impact of ambient water on CQD based electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synergistic Assembly of Charged Oligomers and Amino Acids at the Air–Water Interface: An Avenue toward Surface-Directed CO 2 Capture

Interfaces are considered a major bottleneck in the capture of CO 2 from air. Efforts to design surfaces to enhance CO 2 capture probabilities are challenging due to the remarkably poor understanding of chemistry and self-assembly taking place at these interfaces. In this report we leverage surface-specific vibrational spectroscopy, Langmuir trough techniques, and simulations to mechanistically elucidate how cationic oligomers can drive surface localization of amino acids (AAs) that serve as CO 2 capture agents speeding up the apparent rate of absorption. We demonstrate how tuning these interfaces provides a means to facilitate CO 2 capture chemistry to occur at the interface, while lowering surface tension and improving transport/reaction probabilities. We show that in the presence of interfacial AA-rich aggregates, one can improve capture probabilities vs that of a bare interface, which holds promise in addressing climate change through the removal of CO 2 via tailored interfaces and associated chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗