Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ocean circulation and climate variability in the northern South China Sea during the Greek Minimum derived from coral Δ 14 C and Sr/Ca records

Ocean circulation transports heat, salt and nutrients, and has profound impacts on the marine environment and climate change. However, the seasonal to centennial variations of the paleocirculation of the South China Sea (SCS) and their driving forces are still unclear due to limited records. Here we reconstructed a high-resolution Δ 14 C record of a coral from Sanya to investigate the seasonal variations of the SCS ocean circulation around 2300 cal yr BP during a grand solar minimum (GSM) period. The seasonal Δ 14 C variability shows the influence of coastal upwelling caused by the East Asian Summer Monsoon (EASM) in summer and the effect of water intrusion from the western Pacific Ocean driven by the Kuroshio Intrusion (KI) in winter. Here we compiled the marine radiocarbon reservoir correction (ΔR) records since 2500 cal yr BP, which indicate a gradual decrease of upwelling significantly correlated with the EASM. Comparisons with other climate records suggest that both the EASM and KI may regulate the ocean circulation variability on centennial time scales. As a good index of the sea surface temperature (SST), our Sr/Ca record and spectral analysis results show a low temperature and a low frequency of El Niño-Southern Oscillation (ENSO) events around 2300 cal yr BP. Moreover, the composite coral Sr/Ca-SST and ENSO index records since 2500 cal yr BP show relatively low SST and weak ENSO during GSMs, supporting the modulation of tropical SST and ENSO by solar activity. Our study has provided high-resolution proxy data and revealed the driving forces of ocean circulation and climate change in the SCS at multiple time scales, which should be considered in further modeling work.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

NiAl–MoO 2 S 2 Nanoparticles: Structural Evolution and Mechanistic Insights into High-Performance Selenium Oxyanion Removal across Diverse pH Conditions

Advancing sorbent materials for the selective removal of toxic oxyanions from water requires synthetic control, tunable chemistry, and an atomic-level understanding of structure–function relationships. Here, we report the synthesis and detailed characterization of NiAl–MoO 2 S 2 , a novel layered double hydroxide (LDH) nanomaterial designed for the efficient sequestration of selenium oxoanions (SeO 3 2– and SeO 4 2– ) from complex aqueous environments. The material is synthesized through a room-temperature ion-exchange process, wherein interlayer NO 3 – anions in NiAl–LDH are replaced with MoO 2 S 2 2– clusters, forming high-surface-area, flower-like nanoparticles. Comprehensive structural analysis using the synchrotron X-ray pair distribution function, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy reveals a distinct chemical transformation of intercalated [MoO 2 S 2 ] 2– into [Mo 2 O 2 S 6 ] 2– -like clusters, generating redox-active interlayers that drive selenium capture. This tailored interfacial chemistry underpins the material’s exceptional sorption performance, achieving distribution coefficients (K d ) ≥ 10 6 mL/g and maximum capacities of 343 mg/g for SeO 4 2– and 514 mg/g for SeO 3 2– , outperforming state-of-the-art inorganic sorbents. Importantly, NiAl–MoO 2 S 2 maintains high selectivity and capacity across acidic, neutral, and alkaline pH, efficiently removing selenium from ppm to sub-10 ppb trace levels, even in the presence of competing ions typical of natural and industrial waters. The selenium uptake proceeds via reductive precipitation coupled with the oxidation of molybdenum and sulfide within the LDH framework. This study highlights the power of strategic synthetic modification and interlayer functionalization in LDHs to unlock new structural motifs and redox chemistries, offering a scalable route to advanced materials for environmental remediation.

Adsorption↗
DOE OSTI2023

Adsorbate-Induced Strong Metal–Support Interactions: Implications for Catalyst Design

Since the discovery of strong metal–support interactions (SMSIs) over supported metal catalysts in the 1970s, researchers have studied ways to harness this type of catalyst reconstruction to achieve enhanced stability of metal particles against sintering and to create catalytic sites with novel electronic and bonding properties. The motivation to elucidate performance–structure relationships in catalytic transformations has led researchers to take a closer look into catalytic surfaces under reaction conditions rather than a postreaction analysis. These investigations of operating catalysts have made it clear that SMSIs are more common than initially thought. Recent reports show how various adsorbed species, rather than traditional H 2 /O 2 treatment, can promote SMSI in various catalytic systems, a phenomenon named adsorbate-induced SMSI (A-SMSI). Researching the occurrence of A-SMSI has allowed fundamental understanding of catalyst stability, catalytic rates, and product selectivity. The present Perspective discusses the state-of-the-art regarding A-SMSI, the current challenges, and the opportunities ahead in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Bifunctional Ionic Liquid for Capture and Electrochemical Conversion of CO 2 to CO over Silver

Electrochemical conversion of CO 2 requires selective catalysts and high solubility of CO 2 in the electrolyte to reduce the energy requirement and increase the current efficiency. In this study, the CO 2 reduction reaction (CO 2 RR) over Ag electrodes in acetonitrile-based electrolytes containing 0.1 M [EMIM][2-CNpyr] (1-ethyl-3-methylimidazolium 2-cyanopyrolide), a reactive ionic liquid (IL), is shown to selectively (>94%) convert CO 2 to CO with a stable current density (6 mA·cm –2 ) for at least 12 h. The linear sweep voltammetry experiments show the onset potential of CO 2 reduction in acetonitrile shifts positively by 240 mV when [EMIM][2-CNpyr] is added. This is attributed to the pre-activation of CO 2 through the carboxylate formation via the carbene intermediate of the [EMIM] + cation and the carbamate formation via binding to the nucleophilic [2-CNpyr] – anion. The analysis of the electrode–electrolyte interface by surface-enhanced Raman spectroscopy (SERS) confirms the catalytic role of the functionalized IL where the accumulation of the IL-CO 2 adduct between –1.7 and –2.3 V vs Ag/Ag + and the simultaneous CO formation are captured. Furthermore, this study reveals the electrode surface species and the role of the functionalized ions in lowering the energy requirement of CO 2 RR for the design of multifunctional electrolytes for the integrated capture and conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Anthropogenic Aerosols Contribute to the Recent Decline in Precipitation Over the U.S. Southwest

Abstract The winter‐spring precipitation over the Southwestern United States (SWUS) decreased since 1980. It is frequently attributed to Pacific internal decadal variability, but recent studies found anthropogenic aerosols (AA) can also induce a transition to a negative Pacific Decadal Variability (PDV) phase. We revisit the attribution of SWUS drying by quantifying the contributions of anthropogenically forced decadal Pacific Sea Surface Temperatures (SSTs). Applying a low‐frequency component analysis to observations, Community Earth System Model version 2 (CESM2) all‐forcings and single‐forcing large ensembles, we find up to 42% of the observed precipitation trend to be related to the AA‐induced negative PDV‐like pattern, which is driven by the emission shift from the Western to the Eastern Hemisphere. In CESM2, other radiative forcings counteract the influence of AA, but it remains unclear whether the model correctly simulates this balance. This implies that the near‐future trajectories of these forcings, in particular Asian aerosols, are important for projections of SWUS precipitation.

Geology↗
DOE OSTI2024

Has Reducing Ship Emissions Brought Forward Global Warming?

Abstract Ships brighten low marine clouds from emissions of sulfur and aerosols, resulting in visible “ship tracks”. In 2020, new shipping regulations mandated an ∼80% reduction in the allowed fuel sulfur content. Recent observations indicate that visible ship tracks have decreased. Model simulations indicate that since 2020 shipping regulations have induced a net radiative forcing of +0.12 Wm −2 . Analysis of recent temperature anomalies indicates Northern Hemisphere surface temperature anomalies in 2022–2023 are correlated with observed cloud radiative forcing and the cloud radiative forcing is spatially correlated with the simulated radiative forcing from the 2020 shipping emission changes. Shipping emissions changes could be accelerating global warming. To better constrain these estimates, better access to ship position data and understanding of ship aerosol emissions are needed. Understanding the risks and benefits of emissions reductions and the difficultly in robust attribution highlights the large uncertainty in attributing proposed deliberate climate intervention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces

Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi 0.95 Ni 0.05 O 3–δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi 0.9 Nb 0.05 Ni 0.05 O 3–δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.

25 ENERGY STORAGE↗
DOE OSTI2022

Buffering the impacts of extreme climate variability in the highly engineered Tigris Euphrates river system

More extreme and prolonged floods and droughts, commonly attributed to global warming, are affecting the livelihood of major sectors of the world’s population in many basins worldwide. While these events could introduce devastating socioeconomic impacts, highly engineered systems are better prepared for modulating these extreme climatic variabilities. Herein, we provide methodologies to assess the effectiveness of reservoirs in managing extreme floods and droughts and modulating their impacts in data-scarce river basins. Our analysis of multiple satellite missions and global land surface models over the Tigris-Euphrates Watershed (TEW; 30 dams; storage capacity: 250 km 3 ), showed a prolonged (2007–2018) and intense drought (Average Annual Precipitation [AAP]: < 400 km 3 ) with no parallels in the past 100 years (AAP during 1920–2020: 538 km 3 ) followed by 1-in-100-year extensive precipitation event (726 km 3 ) and an impressive recovery (113 ± 11 km 3 ) in 2019 amounting to 50% of losses endured during drought years. Dam reservoirs captured water equivalent to 40% of those losses in that year. Additional studies are required to investigate whether similar highly engineered watersheds with multi-year, high storage capacity can potentially modulate the impact of projected global warming-related increases in the frequency and intensity of extreme rainfall and drought events in the twenty-first century.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Probing the properties and mechanisms of failure waves in soda-lime glass

Soda-lime glass (SLG) and other silica glasses exhibit the failure wave phenomenon under shock compression. The mechanism responsible for this peculiar behavior of glasses is still unresolved. In this study, a series of plate impact experiments was performed at three different impact stresses of 6.4, 8.3, and 10.8 GPa to better understand the mechanisms underlying the failure wave phenomenon. Specifically, spall experiments were conducted to probe the speed and existence of failure waves at different stresses in SLG. A layered glass target was used to probe the possibility of a “renucleation” of the wave at the SLG–SLG interface. When it existed, the failure wave was inferred to propagate at a speed of 1.3 km/s. However, it was observed that the failure wave phenomenon ceases to exist for impact stresses higher than 10 GPa. In experiments with a 6.4 GPa impact stress, the peak free surface velocity was significantly less than what is predicted by stress-Hugoniot calculations. This velocity deficit and other important features of the measured free surface velocity profiles were simulated using finite element analysis by incorporating an abrupt densification of SLG at a critical stress in the equation of state. Furthermore, this densification feature is similar to what would be expected of a phase transition. Although unable to unambiguously reveal the mechanism causing the failure wave phenomenon, the results of the present work clearly indicate that the failure wave causes a secondary compression and densification in SLG.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Deep Potential model for liquid–vapor equilibrium and cavitation rates of water

Computational studies of liquid water and its phase transition into vapor have traditionally been performed using classical water models. Here, we utilize the Deep Potential methodology—a machine learning approach—to study this ubiquitous phase transition, starting from the phase diagram in the liquid–vapor coexistence regime. The machine learning model is trained on ab initio energies and forces based on the SCAN density functional, which has been previously shown to reproduce solid phases and other properties of water. Here, we compute the surface tension, saturation pressure, and enthalpy of vaporization for a range of temperatures spanning from 300 to 600 K and evaluate the Deep Potential model performance against experimental results and the semiempirical TIP4P/2005 classical model. Moreover, by employing the seeding technique, we evaluate the free energy barrier and nucleation rate at negative pressures for the isotherm of 296.4 K. Further, we find that the nucleation rates obtained from the Deep Potential model deviate from those computed for the TIP4P/2005 water model due to an underestimation in the surface tension from the Deep Potential model. From analysis of the seeding simulations, we also evaluate the Tolman length for the Deep Potential water model, which is (0.091 ± 0.008) nm at 296.4 K. Finally, we identify that water molecules display a preferential orientation in the liquid–vapor interface, in which H atoms tend to point toward the vapor phase to maximize the enthalpic gain of interfacial molecules. We find that this behavior is more pronounced for planar interfaces than for the curved interfaces in bubbles. This work represents the first application of Deep Potential models to the study of liquid–vapor coexistence and water cavitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Current fluctuations and domain depinning in quasi-two-dimensional charge-density-wave 1 T -TaS 2 thin films

We investigated the temperature dependence of the current fluctuations in thin films of the quasi-two-dimensional 1T-TaS 2 van der Waals material. The current fluctuations, determined from the derivative current–voltage characteristics of two-terminal 1T-TaS 2 devices, appear prominently at the electric fields that correspond to the transitions between various charge-density-wave macroscopic quantum condensate phases and at the onset of the depinning of the charge density wave domains. The depinning threshold field, ED, monotonically increases with decreasing temperature within the nearly commensurate charge-density-wave phase. The ED value increases with the decreasing 1T-TaS 2 film thickness, revealing the surface pinning of the charge density waves. Our analysis suggests that the domain depinning is pronounced in the nearly commensurate phase. It is induced by the electric field but facilitated by local heating. Furthermore, the measured trends for ED of the domain depinning are important for understanding the physics of charge density waves in quasi-two-dimensional crystals and for developing electronic devices based on this type of quantum materials.

2D materials↗
DOE OSTI2024

Observation of a super-tetrahedral cluster of acetonitrile-solvated dodecaborate dianion via dihydrogen bonding

We launched a combined negative ion photoelectron spectroscopy and multiscale theoretical investigation on the geometric and electronic structures of a series of acetonitrile-solvated dodecaborate clusters, i.e., B 12 H 12 2- ·nCH 3 CN (n = 1–4). The electron binding energies of B 12 H 12 2- ·nCH 3 CN are observed to increase with cluster size, suggesting their enhanced electronic stability. B3LYP-D3(BJ)/ma-def2-TZVP geometry optimizations indicate each acetonitrile molecule binds to B 12 H 12 2- via a threefold dihydrogen bond (DHB) B3–H3 ⋮⋮⋮ H3C–CN unit, in which three adjacent nucleophilic H atoms in B 12 H 12 2- interact with the three methyl hydrogens of acetonitrile. The structural evolution from n = 1 to 4 can be rationalized by the surface charge redistributions through the restrained electrostatic potential analysis. Notably, a super-tetrahedral cluster of B 12 H 12 2- solvated by four acetonitrile molecules with 12 DHBs is observed. The post-Hartree–Fock domain-based local pair natural orbital- coupled cluster singles, doubles, and perturbative triples [DLPNO-CCSD(T)] calculated vertical detachment energies agree well with the experimental measurements, confirming the identified isomers as the most stable ones. Furthermore, the nature and strength of the intermolecular interactions between B 12 H 12 2- and CH 3 CN are revealed by the quantum theory of atoms-in-molecules and the energy decomposition analysis. Ab initio molecular dynamics simulations are conducted at various temperatures to reveal the great kinetic and thermodynamic stabilities of the selected B 12 H 12 2- ·CH 3 CN cluster. The binding motif in B 12 H 12 2- ·CH 3 CN is largely retained for the whole halogenated series B 12 X 12 2- ·CH 3 CN (X = F–I). This study provides a molecular-level understanding of structural evolution for acetonitrile-solvated dodecaborate clusters and a fresh view by examining acetonitrile as a real hydrogen bond (HB) donor to form strong HB interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The XPS of Azines: A Comparative Study

A detailed analysis is presented of the X-ray Photoelectron Spectroscopy, XPS, of thin films of three Azines: Pyrazine, Pyridine and Pyrimidine. This includes not only the binding energies of the various core ionizations but also their intensities. A major focus is to compare our theoretical predictions with our measured XPS for N(1s) and C(1s) as a basis for assigning the features and for justifying the broadening parameters that must be applied to the theoretical results. The C(1s) XPS of Pyridine and Pyrimidine are significantly broadened because of unresolved XPS for their inequivalent C atoms. The extent of the binding energy, BE, shifts and the XPS intensities for the unique C atoms, which are responsible for this broadening, are obtained from the theory. The additional broadening parameters to be applied to the theory to enable comparison with measured XPS are discussed in terms of lifetime broadening, experimental resolution, and BE shifts in different layers of the thin film. A novel feature of our analysis is that it is necessary to invoke surface core level shifts to explain and to justify the broadenings needed to apply to the theoretical results to have a complete comparison with the measured XPS. The results presented have general value for extracting chemical and physical information from XPS.

Bagus, Paul↗
DOE OSTI2021

Using computational singular perturbation as a diagnostic tool in ODE and DAE systems: a case study in heterogeneous catalysis

We have extended the computational singular perturbation (CSP) method to differential algebraic equation (DAE) systems and demonstrated its application in a heterogeneous-catalysis problem. The extended method obtains the CSP basis vectors for DAEs from a reduced Jacobian matrix that takes the algebraic constraints into account. Here we use a canonical problem in heterogeneous catalysis, the transient continuous stirred tank reactor (T-CSTR), for illustration. The T-CSTR problem is modelled fundamentally as an ordinary differential equation (ODE) system, but it can be transformed to a DAE system if one approximates typically fast surface processes using algebraic constraints for the surface species. We demonstrate the application of CSP analysis for both ODE and DAE constructions of a T-CSTR problem, illustrating the dynamical response of the system in each case. We also highlight the utility of the analysis in commenting on the quality of any particular DAE approximation built using the quasi-steady state approximation (QSSA), relative to the ODE reference case.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Windowed Fourier transform and cross-correlation algorithms for molecular tagging velocimetry

In this study, simulated and experimental molecular tagging velocimetry (MTV) images have been analyzed with a technique commonly used to process grid images on surfaces, the windowed Fourier transform with local spectrum analysis (WFT-LSA). A systematic synthetic image study of the modulation transfer function (MTF) and error tendencies of the WFT-LSA was performed and compared with a PIV-style cross-correlation algorithm to see if advanced strategies such as iterative image deformation can improve analysis of gridded images with high noise levels. Testing of single-pass algorithms showed that in typical MTV images, the WFT-LSA yields significantly lower bias errors than cross-correlation (CC) at displacements greater than 1 pixel but slightly higher random error at all displacements and image conditions. Analysis of the MTF shows that CC provided better resolution of spatial fluctuations than the WFT-LSA in many combinations of grid size and interrogation window. Tests of image deformation algorithms showed that the gap in performance between CC and WFT-LSA is maintained even as both methods improve. Additionally, WFT-LSA and CC methods are applied to real MTV experiments in high-speed gas jet flows. A preliminary analysis of phosphorescence lifetime provided by acetone vapor excited at 266 nm is used for assessing the required gas speeds for making MTV application feasible. The application of WFT-LSA to real MTV images demonstrates the ability of the algorithm to handle further real-world effects that could not be considered in the synthetic image analysis, like reduced signal-to-noise ratio and non-uniform intensity of the tagging grid across the image introduced by the actual laser beam energy distribution. With experimental images, CC is more accurate with shear flows but less robust to high noise levels than WFT-LSA, as predicted by the synthetic image analysis.

42 ENGINEERING↗
DOE OSTI2021

Structural disorder-driven topological phase transition in noncentrosymmetric BiTeI

In this work, we investigate using local structural disorder to induce a topologically nontrivial phase in a solid state system. Using first-principles calculations, we introduce structural disorder in the trivial insulator BiTeI and observe the emergence of a topological insulating phase. By modifying the bonding environments, the crystal-field splitting is enhanced, with spin-orbit interactions producing a band inversion in the bulk electronic structure. Analysis of the Wannier charge centers and the surface electronic structure reveals a strong topological insulator with Dirac surface states. Finally, we propose a prescription for inducing topological states from disorder in crystalline materials. Understanding how local environments produce topological phases is a key step for predicting disordered and amorphous topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Confirmation of the spectral excess in DAMIC at SNOLAB with skipper CCDs

Here, we present results from a 3.25 kg–day target exposure of two silicon charge-coupled devices (CCDs), each with 24 megapixels and skipper readout, deployed in the DAMIC setup at SNOLAB. With a reduction in pixel readout noise of a factor of 10 relative to the previous detector, we investigate the excess population of low-energy events in the CCD bulk previously observed above expected backgrounds. We address the dominant systematic uncertainty of the previous analysis through a depth fiducialization designed to reject surface backgrounds on the CCDs. The measured bulk ionization spectrum confirms the presence of an excess population of low-energy events in the CCD target with characteristic rate of ~7 events per kg-day and electron-equivalent energies of ~80 eV, whose origin remains unknown.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Understanding the Biases in Global Monsoon Simulations from the Perspective of Atmospheric Energy Transport

Understanding global monsoon (GM) variability and projecting its future changes rely heavily on climate models. However, climate models generally show pronounced biases in GM simulations, and the reasons for this remain unclear. Here, in this study, we evaluate the performance of 20 pairs of climate models that participated in both phase 5 of the Coupled Model Intercomparison Project (CMIP5) and phase 6 of CMIP (CMIP6) and identify the sources of their GM simulation biases from an energy transport perspective. The multimodel mean improvement in CMIP6 compared to CMIP5 is demonstrated by the increasing skill scores for various GM metrics from 0.20–0.79 to 0.48–0.83. More specifically, the dry biases in the Northern Hemisphere Summer Monsoon (NHSM) precipitation in CMIP5 [root-mean-square error (RMSE): 1.85 mm day −1 ] are reduced in CMIP6 (RMSE: 1.66 mm day −1 ). This higher simulation skill is associated with higher skill in simulating the precipitation-solstitial mode, monsoon intensity, and monsoon domains. The improvement in the NHSM precipitation simulation results from that in the meridional transport of atmospheric energy. Atmospheric energy budget analysis shows that the negative biases in downward surface longwave radiation and northward energy transport are smaller in CMIP6 than in CMIP5 in the boreal summer, resulting in a more realistic interhemispheric thermal contrast and meridional gradient of moist static energy. However, a major weakness of the CMIP6 models is found in the Southern Hemisphere Summer Monsoon precipitation simulation due to the positive bias in the top-of-the-atmosphere downward longwave radiation. This study shows that reasonably reproducing the meridional global atmospheric energy transportation is necessary for skillful GM simulation.

54 ENVIRONMENTAL SCIENCES↗