Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stacking engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Nanotwinned alloys under high pressure

Nanotwinned alloys are of interest due to their high strength and ductility, but twin boundaries may not be stable under shear. Computational studies indicate that high hydrostatic pressure may suppress detwinning mechanisms. Here, in this study, we investigate the microstructural changes of nanotwinned-nanocrystalline copper-nickel and Inconel 725 alloys under quasi-hydrostatic pressures up to 50 gigapascals (GPa). The alloys are compressed in a diamond anvil cell. In-situ x-ray diffraction (XRD) and ex-situ transmission electron microscopy (TEM) were employed to monitor microstructural changes. Twin boundary deformation and grain growth occur at 11.4 GPa quasi-hydrostatic pressure in the copper-nickel alloy. Molecular dynamics (MD) simulations reveal that hydrostatic pressure causes elevated local shear stress at grain boundaries, which leads to atomic rearrangements. A superposition of hydrostatic and deviatoric pressures lead to partial dislocation mediated twin boundary migration. In contrast, the Inconel 725 alloy showed stable twin and grain boundaries up to a quasi-hydrostatic pressure of 12.7 GPa. Texture, high solid solution strengthening, and low stacking fault energy are hypothesized to the enhanced microstructural stability in Inconel 725.

36 MATERIALS SCIENCE↗

Chlorination of Side Chains: A Strategy for Achieving a High Open Circuit Voltage Over 1.0 V in Benzo[1,2-b:4,5-b']dithiophene-Based Non-Fullerene Solar Cells

Here, a benzo[1,2-b:4,5-b']dithiophene-based donor material with chlorine atoms substituted on its side chains, named PBClT, was designed and developed for application in non-fullerene solar cells to enhance the open-circuit voltage ( V oc ) without decreasing charge carrier transfer in the corresponding blend films. The results demonstrated that the chlorinated PBClT polymer was an efficient donor in non-fullerene polymer solar cells (PSCs) and exhibited a blue-shifted absorbance, resulting in more complementary light absorption with non-fullerene acceptors, such as ITIC. In addition, the chlorine substitution decreased the HOMO level of PBClT, and as a result, the V oc of the corresponding solar cell increased dramatically to 1.01 V, which is much higher than that of the non-chlorine analog, PTB7-Th, with a V oc of approximately 0.82 V. The 2D-GIWAX results illustrated that the PBClT/ITIC blend film exhibited a “face-on” orientation, which suggested that the chlorine substituents on the side chains favored π-π stacking in the direction perpendicular to the electron flow in photovoltaic devices. Furthermore, the PBClT/ITIC blend film showed a π-π stacking distance of 3.85 Å, which was very close to that of its non-chlorine analog blend film with a distance of approximately 3.74 Å. Based on this result, the introduction of multiple chlorine atoms on the conjugated side chains not only adjusted the energy level of the low-band-gap polymer through the electron withdrawing ability of the chlorine atoms but also subtly avoided obvious morphological changes that could result from strong steric hindrance in the main chain of the polymers. The PBClT/ITIC-based PSCs exhibited a maximum PCE of 8.46% with a V oc of 1.01 V, which is an increase in the PCE of approximately 22% compared to the PTB7-Th-based device based on our parallel experiments.

14 SOLAR ENERGY↗

Electrical Safety Practices Developed for Automotive Lithium Ion Battery Dismantlement

ORNL is developing electrical safety practices for handling and disassembling automotive lithium ion batteries in a research environment. Online literature searches did not reveal any standard electrical safety practices for disassembling lithium ion battery stacks from automobiles. Until recently, there has been insufficient motivation to recycle or refurbish spent automotive lithium ion batteries due to limited volumes entering the secondary market. However, a growing volume of spent lithium ion batteries are beginning to collect in automobile salvage yards, recycling facilities, landfills, and other places due to a shortage of economically and environmentally viable end-of-life options. ORNL studied automotive battery pack, module, and cell dismantlement to understand the risks, hazards, and controls necessary to perform dismantlement safely and economically. Packs, modules, and cells were manually taken apart, while wearing appropriate personal protective equipment, with insulated hand tools. These dismantlement studies point out the hazards and risks associated with dismantling automotive lithium ion batteries and describe practices for controlling such hazards and risks while demonstrating the controls through a case study of a first-generation Chevrolet Volt battery pack.

25 ENERGY STORAGE↗

NanoMechanics: Elasticity and Friction in Nano‐Objects

A large scientific and technological effort is underway to investigate the properties of two‐dimensional (2D) materials to become building blocks in integrated nano‐electronic and photonic circuits, composites, coatings, energy harvesting nano‐ systems, nano‐sensors, and nano‐electro‐mechanical systems (NEMS).While several experiments and calculations have revealed exciting novel phenomena in these nanostructures, many scientific and technological questions remain open. In particular, understanding and controlling the structure and mechanical properties of 2D materials at the interface with a solid surface is of key importance to enable the aforementioned nanotechnologies, as well as to fulfill the potential of strain engineering to tailor their properties. The vision of this DoE research program was to investigate novel mechanical properties and phenomena in 1D and 2D materials with the overarching goal of defining a new basic understanding of mechanical behavior in nano and quantum systems. The group of the PI has developed in the last years several studies on the mechanical properties of Carbon nanotubes and oxide nanobelts, more recently the PI has focused her attention on the properties of two‐dimensional materials, such as graphene and MoS 2 , which are a few‐atomic‐layer thick films and hold a great potential for technological and energy applications. The most studied 2D material is graphene, existing as a single layer of graphite or a few‐layer thick epitaxial graphene film. Graphene possesses a large in‐plane Young’s modulus as well as high intrinsic carrier mobility, and high in‐plane thermal conductivity. Besides graphene, also 2D films of graphene oxide (GO), hexagonal Boron Nitride (h‐BN), and transition metal dichalcogenides such as MoS 2 exhibit unique and excellent properties and hold great promise for nanotechnology applications. This research program was aimed at developing a new basic understanding of the mechanical properties of 1D and 2D materials at the interface with solid substrates, with a focus on the role of defects, materials structure, and substrate interaction. Ultimately, we aimed at developing the basic knowledge and experimental tools for manipulating 1D and 2D materials’ structure, stacking, substrate interaction, defects, and number of layers to realize an entirely new class of ultra‐hard, ultra‐thin, and ultra‐light active materials with ad‐ hoc mechanical properties for a variety of applications.

2D Materials↗

Internally-heated thermal and externally-cool photovoltaic cascade solar energy system for full solar spectrum utilization

A single-stack, solar power receiver comprising both a thermal absorber layer and a photovoltaic cell layer. The stack includes an aerogel layer, that is optically transparent and thermally insulating ("OTTI"); a spectrally selective high thermal conductivity ("SSTC") thermal absorber layer; a bottom OTTI layer; and a PV cell layer. The SSTC layer includes a set of fins that substantially blocks solar radiation absorption in the band where PV cells are most sensitive. Photons with energies above or below this band block range are absorbed by the fins and the absorbed heat is conducted to pipes in the fin structure carrying a heated thermal working fluid to heat storage. Photons with energy in the band block range are reflected by the SSTC fins to the PV cell layer. The bottom OTTI aerogel layer keeps the PV cell operating near ambient temperature. The PV cell converts incident solar radiation to electrical energy.

14 SOLAR ENERGY↗

An investigation of a multi-layered oscillating heat pipe additively manufactured from Ti-6Al-4V powder

Here, a laser powder bed fusion (L-PBF) additive manufacturing (AM) method was employed for fabricating a multi-layered, Ti-6Al-4V oscillating heat pipe (ML-OHP). The 50.8 × 38.1 × 15.75 mm 3 ML-OHP consisted of four inter-connected layers of circular mini-channels, as well an integrated, hermetic-grade fill port. A series of experiments were conducted to characterize the ML-OHP thermal performance by varying power input (up to 50 W), working fluid (water, acetone, Novec™ 7200, and n-pentane), and operating orientation (vertical bottom-heating, horizontal, and vertical top-heating). The ML-OHP was found to operate effectively for all working fluids and orientations investigated, demonstrating that the OHP can function in a multi-layered form, and further indicating that one can ‘stack’ multiple, interconnected OHPs within flat media for increased thermal management. The ML-OHP evaporator size was found to depend on the layer-wise heat penetration which subsequently depends on power input and the ML-OHP design and material selection. Using neutron radiography, electron scanning microscopy and surface metrology, the ML-OHP channel structure was characterized and found to possess sintered Ti-6Al-4V powder along its periphery. The sintered channel surface, although a byproduct of the L-PBF manufacturing process, was found to behave as a secondary wicking structure for enhanced capillary pumping and wall/fluid heat transfer within the OHP. With the newfound capabilities of AM, many high heat flux thermal management devices, specifically those that employ mini- or micro-channels, can be ‘re-invented’ to possess embedded channels with atypical geometries, arrangements and surface conditions.

42 ENGINEERING↗

Direct laser writing of volumetric gradient index lenses and waveguides

Abstract Direct laser writing (DLW) has been shown to render 3D polymeric optical components, including lenses, beam expanders, and mirrors, with submicrometer precision. However, these printed structures are limited to the refractive index and dispersive properties of the photopolymer. Here, we present the subsurface controllable refractive index via beam exposure (SCRIBE) method, a lithographic approach that enables the tuning of the refractive index over a range of greater than 0.3 by performing DLW inside photoresist-filled nanoporous silicon and silica scaffolds. Adjusting the laser exposure during printing enables 3D submicron control of the polymer infilling and thus the refractive index and chromatic dispersion. Combining SCRIBE’s unprecedented index range and 3D writing accuracy has realized the world’s smallest (15 µm diameter) spherical Luneburg lens operating at visible wavelengths. SCRIBE’s ability to tune the chromatic dispersion alongside the refractive index was leveraged to render achromatic doublets in a single printing step, eliminating the need for multiple photoresins and writing sequences. SCRIBE also has the potential to form multicomponent optics by cascading optical elements within a scaffold. As a demonstration, stacked focusing structures that generate photonic nanojets were fabricated inside porous silicon. Finally, an all-pass ring resonator was coupled to a subsurface 3D waveguide. The measured quality factor of 4600 at 1550 nm suggests the possibility of compact photonic systems with optical interconnects that traverse multiple planes. SCRIBE is uniquely suited for constructing such photonic integrated circuits due to its ability to integrate multiple optical components, including lenses and waveguides, without additional printed supports.

36 MATERIALS SCIENCE↗

Optimization of Hafnium dimensions for thermal epithermal experiments (TEX) with highly enriched uranium Jemima plates and polyethylene - 14517

The goal of the US Nuclear Criticality Safety Program's Thermal Epithermal experiments (TEX) is to design and conduct new critical experiments to address high priority nuclear data needs from the nuclear criticality safety and nuclear data communities, with special emphasis on intermediate energy (0.625 eV - 100 keV) assemblies. The second set of TEX experiments will use stacks of highly enriched uranium Jemima plates, hafnium (Hf) diluent plates, and polyethylene moderator plates to create assemblies that span a wide range of fission energy spectra, from thermal, through intermediate, to fast energies. As the hafnium plates need to be fabricated and represent a significant cost for this experiment, a parameter study examining experimental configurations with various Hf thicknesses was completed using KENO V.a to determine optimal dimensions. The Hf plate thicknesses were optimized based on three major design criteria: 1) ensuring thermal, intermediate, and fast critical configurations could be built, 2) creating assemblies with a height to diameter ratio of approximately one, and 3) maximizing sensitivity to hafnium isotope cross sections, as predicted by the SCALE/TSUNAMI package. Based on the calculations presented in this report, a hafnium thickness of 0.10 cm will result in compact critical assemblies using the existing Jemima plate inventory, while reducing Hf cost and ensuring adequate sensitivity of the system to hafnium cross sections. (authors)

42 ENGINEERING↗

Disk Mechanical Test Development

The target disks are held in a circular slot in a stainless steel holder. The holder is sized and toleranced so that the disks fit without constraint in the holder at the temperature of the parts under the irradiation condition. The target is a stack of 29 mm diameter disks 0.5 mm thick separated by 0.25 mm coolant gaps. The hottest disks reach a temperature of 1263 K at the center. Figure 1 shows the temperature contour plot of the hottest disk, Disk 14. Temperature increase causes thermal expansion through the thickness and radially. The radial thermal expansion in particular causes thermal stresses, aggravated by the fact that the center heats significantly more than the edge. Thus the center of the disk expands radially but the relatively cool outer edge constrains that motion. The resulting thermal stress is shown in Figure 2, showing a peak thermal stress of 281 MPa at the center. Stress/strain curves for molybdenum are shown in the plot in Figure 3. From the curve at 982°C, it is evident that plastic deformation will result, with a maximum deformation of 0.002 in (0.05 mm). Actual deformation is shown in Figures 4 and 5 in one radial plane and in the "Z" direction through the thickness.

36 MATERIALS SCIENCE↗

Quantitative relationships between film morphology, charge carrier dynamics, and photovoltaic performance in bulk-heterojunction binary vs. ternary acceptor blends

Addressing pertinent and perplexing questions regarding why nonfullerene acceptors (NFAs) promote higher power conversion efficiencies (PCEs) than traditional fullerenes and how photoactive bulk heterojunction (BHJ) film morphology, charge photogeneration, and recombination dynamics dictate solar cell performance have stimulated many studies of polymer solar cells (PSCs), yet quantitative relationships remain limited. Better understanding in these areas offers the potential to advance materials design and device engineering, afford higher PCEs, and ultimate commercialization. Here we probe quantitative relationships between BHJ film morphology, charge carrier dynamics, and photovoltaic performance in model binary and ternary blend systems having a wide bandgap donor polymer, a fullerene, and a promising NFA. We show that optimal PC 71 BM incorporation in a PBDB-TF:ITIC-Th binary system matrix retains the original π-face-on orientation, ITIC-Th crystallinity and BHJ film crystallite dimensions, and reduces film upper surface ITIC-Th segregation. Such morphology changes together simultaneously increase hole (μ h ) and electron (μ e ) mobilities, facilitate light-activated ITIC-Th to PC 71 BM domain electron delocalization, reduce free charge carrier (FC) bimolecular recombination (BR) within PBDB-TF:ITIC-Th mixed regions, and increase FC extraction pathways viaPBDB-TF:PC 71 BM pairs. The interplay of these effects yields significantly enhanced inverted cell short-circuit current density (J SC ), fill factor (FF), and PCE. Unexpectedly, we also find that excessive PC 71 BM in the PBDB-TF:ITIC-Th binary system alters the PBDB-TF orientation to π-edge-on, increases large scale PC 71 BM-rich aggregations and BHJ upper surface PC 71 BM composition. Further, these morphology changes increase parasitic decay processes such as intersystem crossing from photoexcited PC 71 BM, compromising the J SC , FF, and PCE metrics. ITIC-Th X-ray diffraction reveals a unique sidechain-dominated molecular network with previously unknown sidechain-end group stacking, rationalizing the STEM and GIWAXS results, photophysics, and the high μ e . DFT computation reveals charge transfer networks within ITIC-Th crystallites, supporting excited-state electron delocalization from ITIC-Th to PC 71 BM. This structure–property understanding leads to a newly reported NFA blend with PCE near 17%.

14 SOLAR ENERGY↗

Pixelated plastic scintillator array manufacturing using fast-, photo-curable resin

Pixelated plastic scintillator arrays can serve as high efficiency and high resolution neutron imaging detectors. Manufacturing these arrays is intensive in both time and labor. This article presents a fabrication method based on additive manufacturing for two-dimensional plastic organic scintillator arrays using a custom-built automated assembly machine and a custom photocurable resin that has significant non-aromatic acrylate oligomer content. The process involves two main stages: fully autonomous production of one-dimensional layered arrays, followed by semi-autonomous cutting and stacking to form two-dimensional pixel arrays. One-dimensional arrays were manufactured at a rate of around 4 layers per hour with minimal defects and tight dimensional tolerances, while two-dimensional arrays up to 7 x 7 pixels and 70 mm in length were completed in approximately 3.5 hours. Final arrays exhibited dimensional deviations of less than 0.5 mm. Two-dimensional arrays read out by a multi-anode photomultiplier tube demonstrated per-pixel position resolution and pulse-shape discrimination, enabling gamma–neutron interaction separation in mixed radiation environments.

36 MATERIALS SCIENCE↗

Understanding Reliability Trade-Offs in 1T-nC and 2T-nC FeRAM Designs

Ferroelectric random access memory (FeRAM) is a promising candidate for energy-efficient nonvolatile memory, particularly for logic-in-memory and compute-in-memory (CIM) applications. Among the available cell architectures, One-Transistor–n-Capacitor (1T-nC) and two-transistor–n-capacitor (2T-nC) FeRAMs each offer distinct trade-offs in density, scalability, and reliability. In this work, we present a comparative study of these two architectures under both dimensional scaling ( XY/Z shrinkage) and vertical integration (increasing stacked capacitors per cell). Using technology computer-aided design (TCAD) and circuit-level simulations, we analyze how scaling impacts ferroelectric capacitance, parasitic coupling, and floating-node (FN) dynamics, which together dictate sense margin (SM) and read stability. A key mitigation strategy—floating unselected capacitors—is applied to both architectures, effectively decoupling the SM from the number of stacked capacitors and enabling tractable analysis across scaling regimes. Results show that 1T-nC suffers more from charge sharing with the bitline (BL), while 2T-nC benefits from transistor isolation and stronger low-voltage sensing at the cost of increased area. By systematically evaluating these behaviors across scaling directions, this work establishes the reliability trade-offs of 1T-nC and 2T-nC cells and provides design guidelines for high-density, vertically integrated FeRAM systems.

1T-nC↗

Hydrogen segregation to inclined Σ3 < 110 > twin grain boundaries in nickel

Low-mobility twin grain boundaries dominate the microstructure of grain boundary-engineered materials and are critical to understanding their plastic deformation behaviour. The presence of solutes, such as hydrogen, has a profound effect on the thermodynamic stability of the grain boundaries. This work examines the case of a Σ3 grain boundary at inclinations from 0° ≤ Φ ≤ 90°. The angle Φ corresponds to the rotation of the Σ3 (1 1 1) < 1 1 0 > (coherent) into the Σ3 (1 1 2) < 1 1 0 > (lateral) twin boundary. To this end, atomistic models of inclined grain boundaries, utilising empirical potentials, are used to elucidate the finite-temperature boundary structure while grand canonical Monte Carlo models are applied to determine the degree of hydrogen segregation. In order to understand the boundary structure and segregation behaviour of hydrogen, the structural unit description of inclined twin grain boundaries is found to provide insight into explaining the observed variation of excess enthalpy and excess hydrogen concentration on inclination angle, but the explanatory power is limited by how the enthalpy of segregation is affected by hydrogen concentration. At higher concentrations, the grain boundaries undergo a defaceting transition. In order to develop a more complete mesoscale model of the interfacial behaviour, an analytical model of boundary energy and hydrogen segregation that relies on modelling the boundary as arrays of discrete 1/3 < 1 1 1 > disconnections is constructed. Lastly, the complex interaction of boundary reconstruction and concentration-dependent segregation behaviour exhibited by inclined twin grain boundaries limits the range of applicability of such an analytical model and illustrates the fundamental limitations for a structural unit model description of segregation in lower stacking fault energy materials.

36 MATERIALS SCIENCE↗

Electronic cooling via interlayer Coulomb coupling in multilayer epitaxial graphene

In van der Waals bonded or rotationally disordered multilayer stacks of two-dimensional (2D) materials, the electronic states remain tightly confined within individual 2D layers. As a result, electron–phonon interactions occur primarily within layers and interlayer electrical conductivities are low. In addition, strong covalent in-plane intralayer bonding combined with weak van der Waals interlayer bonding results in weak phonon-mediated thermal coupling between the layers. We demonstrate here, however, that Coulomb interactions between electrons in different layers of multilayer epitaxial graphene provide an important mechanism for interlayer thermal transport, even though all electronic states are strongly confined within individual 2D layers. This effect is manifested in the relaxation dynamics of hot carriers in ultrafast time-resolved terahertz spectroscopy. We develop a theory of interlayer Coulomb coupling containing no free parameters that accounts for the experimentally observed trends in hot-carrier dynamics as temperature and the number of layers is varied.

42 ENGINEERING↗

Harvesting 88 Zr from heavy-ion beam irradiated tungsten at the National Superconducting Cyclotron Laboratory

Tungsten is a commonly used material at many heavy-ion beam facilities, and it often becomes activated due to interactions with a beam. Many of the activation products are useful in basic and applied sciences if they can be recovered efficiently. In order to develop the radiochemistry for harvesting group (IV) elements from irradiated tungsten, a heavy-ion beam containing 88 Zr was embedded into a stack of tungsten foils at the National Superconducting Cyclotron Laboratory and a separation methodology was devised to recover the 88 Zr. The foils were dissolved in 30% hydrogen peroxide, and the 88 Zr was chemically purified from the tungsten matrix and from other co-implanted radionuclides (such as 85 Sr and 88 Y) using strong cation-exchange (AG MP-50) chromatographic resin in sulfuric acid media. The procedure provided 88 Zr in approximately 60 mL 0.5 M sulfuric acid with no detectable radio-impurities. The overall recovery yield for 88 Zr was (92.3 ± 1.2)%. In conclusion, this proof-of-concept experiment has facilitated the development of methodologies to harvest from tungsten and tungsten-alloy parts that are regularly irradiated at heavy-ion beam facilities.

07 ISOTOPE AND RADIATION SOURCES↗

Vertical 2T-nC FeRAM Demonstration: BEOL Read Transistor for 4F 2 Memory Strings and Two-Terminal Selector Design for Polarization Disturb Mitigation

In this work, we demonstrate a vertical 2T-nC FeRAM with a back-end-of-line (BEOL) read transistor (T R ) for 4F 2 string and propose a selector design to mitigate polarization disturb in passive capacitor crossbar arrays. Key contributions include: 1) successful integration and operation composed of a Si MOSFET write transistor (T W ), 3-layer cylindrical ferroelectric capacitors, and Si-doped In 2 O 3 BEOL T R , demonstrating the feasibility of 4F 2 2T−nC string; 2) introducing nonlinearity into the capacitor stack to suppress ferroelectric voltage drop under inhibition biases while maintaining sufficient write voltage, reducing disturbance; 3)modeling and experimental validation of inserting a metalsemiconductor (a-Si)-metal (MSM) selector into the capacitor in mitigating the disturb, particularly achieving 9x reduction of disturb after 10 6 cycles in the V W /2 scheme.

42 ENGINEERING↗

Record thermopower found in an IrMn-based spintronic stack

The Seebeck effect converts thermal gradients into electricity. As an approach to power technologies in the current Internet-of-Things era, on-chip energy harvesting is highly attractive, and to be effective, demands thin film materials with large Seebeck coefficients. In spintronics, the antiferromagnetic metal IrMn has been used as the pinning layer in magnetic tunnel junctions that form building blocks for magnetic random access memories and magnetic sensors. Spin pumping experiments revealed that IrMn Néel temperature is thickness-dependent and approaches room temperature when the layer is thin. Here, we report that the Seebeck coefficient is maximum at the Néel temperature of IrMn of 0.6 to 4.0 nm in thickness in IrMn-based half magnetic tunnel junctions. We obtain a record Seebeck coefficient 390 (±10) μV K -1 at room temperature. Our results demonstrate that IrMn-based magnetic devices could harvest the heat dissipation for magnetic sensors, thus contributing to the Power-of-Things paradigm.

42 ENGINEERING↗

Gate-tunable modulation of the optical properties of multilayer graphene by the reversible intercalation of ionic liquid anions

We demonstrate a substantial modulation of the optical properties of multilayer graphene (~100 layers) using a simple device consisting of a multilayer graphene/polymer electrolyte membrane/gold film stack. Applying a voltage of 3–4 V drives the intercalation of anion [TFSI] - [ion liquid diethylmethyl(2-methoxyethyl)ammonium bis(trifluoromethylsulfonyl)imide [DEME][TFSI]] resulting in the reversible modulation of the properties of this optically dense material. Upon intercalation, we observe an abrupt shift of 35 cm -1 in the G band Raman mode, an abrupt increase in FTIR reflectance over the wavelength range from 1.67 to 5 $μ$m (2000–6000 cm -1 ), and an abrupt increase in luminescent background observed in the Raman spectra of graphene. Furthermore, all of these abrupt changes in the optical properties of this material arise from the intercalation of the TFSI - ion and the associated change in the free carrier density (Δ$n$ = 10 20 cm -3 ). Suppression of the 2D band Raman mode observed around 3 V corresponds to Pauli blocking of the double resonance Raman process and indicates a modulation of the Fermi energy of Δ$E$ F = 1.1 eV.

42 ENGINEERING↗