Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stabilization method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Gate‐Voltage Control of Borophene Structure Formation

Abstract Boron nanostructures are easily charged but how charge carriers affect their structural stability is unknown. We combined cluster expansion methods with first‐principles calculations to analyze the dependence of the preferred structure of two‐dimensional (2D) boron, or “borophene”, on charge doping controlled by a gate voltage. At a reasonable doping level of 3.12×10 14 cm −2 , the hollow hexagon concentration in the ground state of 2D boron increases to 1/7 from 1/8 in its charge‐neutral state. The numerical result for the dependence of hollow hexagon concentration on the doping level is well described by an analytical method based on an electron‐counting rule. Aside from in‐plane electronic bonding, the hybridization among out‐of‐plane boron orbitals is crucial for determining the relative stability of different sheets at a given doping level. Our results offer new insight into the stability mechanism of 2D boron and open new ways for the control of the lattice structure during formation.

Zhang, Zhuhua↗
DOE OSTI2015

Hydrothermal synthesis of superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with ionic liquids as stabilizer

Highlights: • Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with good dispersity have been synthesized via hydrothermal method. • Ionic liquid [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles. • Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K. - Abstract: Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have been successfully synthesized under hydrothermal condition with the assistant of ionic liquid 1-hexadecyl-3-methylimidazolium chloride ([C{sub 16}mim]Cl). The structure and morphology of the sample have been investigated by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM), and the results indicate that the as-synthesized inverse spinel Fe{sub 3}O{sub 4} nanoparticles have an average diameter of about 10 nm and exhibit relatively good dispersity. More importantly, it is found that [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles by adsorbing on the particles surfaces to prevent the agglomeration. In addition, the obtained superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Single‐Step Recovery of Water from Stable Crude Oil‐Water Emulsion Using Surface Engineered Hybrid Inorganic‐Polymer Membranes

ABSTRACT Separating crude oil from water remains one of the most stubborn challenges in environmental remediation, especially for surfactant‐stabilized emulsions that resist conventional demulsification methods. Here, we report a scalable strategy for achieving near‐zero‐discharge separation of crude oil emulsions using a single superhydrophilic membrane. By applying low‐temperature atomic layer deposition (ALD) of various metal oxides onto activated polyvinylidene fluoride (PVDF) membranes, we create atomically precise surface‐engineered (SE) membranes that maintain an exceptionally strong hydration layer at the membrane‐feed interface, even at high oil loadings. Among the various metal oxides, TiO 2 ‐modified SE membranes exhibit superior interfacial water stability, enabling sustained dewatering of complex crude oil‐water emulsions with >98% separation efficiency and >97% water recovery, compared to only 24.6% water recovery for the pristine membrane. This separation performance surpasses conventional hydrophilic membranes and is comparable to complex Janus channel membrane systems, demonstrating near‐complete emulsion separation using a single membrane. This low‐temperature membrane surface engineering process with atomic‐level precision and potential for scalability via roll‐to‐roll fabrication is promising for industrial‐scale, energy‐efficient water treatment and oil spill remediation applications.

Sengupta, Bratin [Applied Materials Division Argon↗
DOE OSTI2018

An atomistic building block description of C-S-H - Towards a realistic C-S-H model

Understanding the atomistic structure of Calcium silicate hydrate (C-S-H), the main product of cement hydration, is of paramount importance to better formulate sustainable cement. The existing atomistic models are not in total agreement with experimental results and fail to explain the nanosized nature of C-S-H. Here, we present a new approach for describing the complexity of these structures at the molecular level, enabling a detailed comparison of C-S-H models. The new methodology encodes a full, large scale atomistic C-S-H structure by a simple, readable string of characters, similar to the way the base sequence in DNA encodes a vast range of different proteins. We then use the methodology to assess 14 Å tobermorite-defect structures and their stabilities using DFT and classical molecular dynamics. Finally we highlight how the model may be extended to develop reliable atomistic C-S-H models for a range of Ca/Si ratios and conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2016

TH-AB-BRA-09: Stability Analysis of a Novel Dose Calculation Algorithm for MRI Guided Radiotherapy

Purpose: To determine the iterative deterministic solution stability of the Linear Boltzmann Transport Equation (LBTE) in the presence of magnetic fields. Methods: The LBTE with magnetic fields under investigation is derived using a discrete ordinates approach. The stability analysis is performed using analytical and numerical methods. Analytically, the spectral Fourier analysis is used to obtain the convergence rate of the source iteration procedures based on finding the largest eigenvalue of the iterative operator. This eigenvalue is a function of relevant physical parameters, such as magnetic field strength and material properties, and provides essential information about the domain of applicability required for clinically optimal parameter selection and maximum speed of convergence. The analytical results are reinforced by numerical simulations performed using the same discrete ordinates method in angle, and a discontinuous finite element spatial approach. Results: The spectral radius for the source iteration technique of the time independent transport equation with isotropic and anisotropic scattering centers inside infinite 3D medium is equal to the ratio of differential and total cross sections. The result is confirmed numerically by solving LBTE and is in full agreement with previously published results. The addition of magnetic field reveals that the convergence becomes dependent on the strength of magnetic field, the energy group discretization, and the order of anisotropic expansion. Conclusion: The source iteration technique for solving the LBTE with magnetic fields with the discrete ordinates method leads to divergent solutions in the limiting cases of small energy discretizations and high magnetic field strengths. Future investigations into non-stationary Krylov subspace techniques as an iterative solver will be performed as this has been shown to produce greater stability than source iteration. Furthermore, a stability analysis of a discontinuous finite element space-angle approach (which has been shown to provide the greatest stability) will also be investigated. Dr. B Gino Fallone is a co-founder and CEO of MagnetTx Oncology Solutions (under discussions to license Alberta bi-planar linac MR for commercialization)

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Suppression of Alfven Modes on the National Spherical Torus Experiment Upgrade with Outboard Beam Injection [Suppression of Alfven Modes on the NSTX-U with Outboard Beam Injection]

In this paper we present data from experiments on the National Spherical Torus Experiment Upgrade, where it is shown for the first time that small amounts of high pitch-angle beam ions can strongly suppress the counterpropagating global Alfven eigenmodes (GAE). GAE have been implicated in the redistribution of fast ions and modification of the electron power balance in previous experiments on NSTX. The ability to predict the stability of Alfven modes, and developing methods to control them, is important for fusion reactors like the International Tokamak Experimental Reactor, which are heated by a large population of nonthermal, super-Alfvenic ions consisting of fusion generated alpha's and beam ions injected for current profile control. We present a qualitative interpretation of these observations using an analytic model of the Doppler-shifted ion-cyclotron resonance drive responsible for GAE instability which has an important dependence on k(perpendicular to rho L). A quantitative analysis of this data with the HYM stability code predicts both the frequencies and instability of the GAE prior to, and suppression of the GAE after the injection of high pitch-angle beam ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A high-order, localized-artificial-diffusivity method for Eulerian simulation of multi-material elastic-plastic deformation with strain hardening

A high-order method for Eulerian simulation of material undergoing large elastic–plastic deformation is developed. Thermodynamically consistent hyperelastic constitutive relations are assumed, facilitating the treatment of solids, liquids, and gases in a unified manner. Here, the method enables the simulation of multi-material interactions using a diffuse interface approach. Numerical capturing of material interfaces, shock waves, contact surfaces, and elastic-plastic strain discontinuities using high-order compact-difference schemes is assisted by Localized Artificial Diffusivity (LAD). In the new setting involving elastic–plastic deformation, the previously established terms for the artificial properties are verified to effectively regularize normal shocks. Additional LAD terms are introduced to the elastic and plastic kinematic equations to regularize shear shocks and other strain discontinuities, improving solution stability. Other important features of the method that improve robustness include the numerical treatment of compatibility terms in the kinematic equations, and the treatment of rotation. Particular emphasis is focused toward new advancements of the methods for plastic-deformation integration and the associated strain hardening of the material, including rate-dependent plasticity. The method is demonstrated on a variety of test problems, including 1-D impacts, a variant of the Shu-Osher problem, a Taylor impact, and a Richtmyer-Meshkov instability between two elastic–plastic solids with strain hardening.

42 ENGINEERING↗
DOE OSTI2018

On nonlinear inexact Uzawa algorithms for stabilized saddle point problems

In this paper, the nonlinear inexact Uzawa (NIU) methods for saddle point problems are studied. A further improved convergence result of the NIU algorithm for stabilized saddle point problems is presented, which results in much smaller convergence factor. This result can also be viewed as a generalization of some previous work for classical saddle point problems. Based on this result, we generalize some adaptive versions of the NIU algorithm with variable iteration parameters for classical saddle point problems to solve stabilized saddle point problems. Convergence analyses of these algorithms are presented. It shows that they converge under similar conditions as those in classical cases, which are more practical and without estimates on the extreme eigenvalues of the involved preconditioned systems. Numerical experiments are given to demonstrate the effectiveness of these algorithms over some original NIU algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Rapid Assessment of the Physical Stability of Amorphous Solid Dispersions

Amorphous solid dispersions (ASDs) can potentially increase the apparent solubility and thereby the oral bioavailability of poorly soluble compounds. Furthermore, their physical instability, i.e., potential to crystallize, is a major concern. Our objective was to explore methods for rapid assessment of the physical stability of ASDs. Ketoconazole ASDs were prepared with each of the three polymers, poly(acrylic acid) (PAA), poly(2-hydroxyethyl methacrylate) (PHEMA), and polyvinylpyrrolidone (PVP). The physical stability of these ASDs was evaluated after exposure to 90% RH (25 °C) in an automated water sorption analyzer. The onset time for ketoconazole crystallization, induced by water sorption, was rank ordered as PAA > PHEMA > PVP. Additionally, the ability of the polymers to inhibit crystallization on contact with aqueous medium was studied by powder X-ray diffractometry using synchrotron radiation. In this case, the rank ordering was PAA ~ PHEMA > PVP. To check the validity of our approach, the long-term stability of ketoconazole in ASDs was evaluated in the glassy state, both at 25 and at 40 °C, and was rank ordered as PAA > PHEMA > PVP. Crystallization, accelerated by water vapor sorption, can serve as an effective preliminary screening tool to rapidly evaluate and rank order the physical stability of ASDs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Relationship between operational variables, fundamental physics and foamed cement properties in lab and field generated foamed cement slurries

Foamed cement is a critical component for wellbore stability. The mechanical performance of a foamed cement depends on its microstructure, which in turn depends on the preparation method and attendant operational variables. Determination of cement stability for field use is based on laboratory testing protocols governed by API Recommended Practice 10B-4 (API RP 10B-4, 2015). However, laboratory and field operational variables contrast considerably in terms of scale, as well as slurry mixing and foaming processes. Here in this paper, laboratory and field operational processes are characterized within a physics-based framework. It is shown that the “atomization energy” imparted by the high pressure injection of nitrogen gas into the field mixed foamed cement slurry is – by a significant margin – the highest energy process, and has a major impact on the void system in the cement slurry. There is no analog for this high energy exchange in current laboratory cement preparation and testing protocols. Quantifying the energy exchanges across the laboratory and field processes provides a basis for understanding relative impacts of these variables on cement structure, and can ultimately lead to the development of practices to improve cement testing and performance.

02 PETROLEUM↗
DOE OSTI2021

Air entraining admixtures: Mechanisms, evaluations, and interactions

Air entraining admixtures (AEAs) are surfactant-based solutions and powders that are used to stabilize air voids in cement paste that protect concrete against frost damage. After reviewing the chemical and structural features of AEA that govern their performance, we discuss: (i) how they establish a stabilizing shell around air voids, (ii) methods for quantifying the distribution of voids after mixing and after hardening, (iii) mechanisms by which voids protect against frost damage, (iv) effects of AEA on other properties of wet and hardened concrete, and (v) interactions of AEA with other chemical and supplementary cementitious materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Pressure and temperature phase diagram of Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation

The pressure and temperature phase diagram of Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation are calculated by means of molecular dynamics calculations. The critical temperature for amorphization obeys a linear law with pressure. Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation transits towards the fluorite above this temperature and amorphizes below. The configuration of the Ti interstitial reveals to be the key of the amorphizability of Gd{sub 2}Ti{sub 2}O{sub 7}. Its stability depends upon disorder and pressure. Low pressure promotes the stabilization of Ti linked-polyhedra that drive the system to the amorphous state under irradiation. Conversely, high pressure activates its destabilization to interstitials that recombine with vacancies, driving the system to the fluorite structure under irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Manipulation of magnetic state in nanostructures by perpendicular anisotropy and magnetic field

We investigate the transitions of spin configurations in ultrathin nanostructures by tuning the perpendicular anisotropy (K{sub z}) and out-of-plane magnetic field (H), using the Monte Carlo simulation. It is revealed that enhancing the anisotropy K{sub z} can drive the evolution of in-plane vortex state into intriguing saturated magnetization states under various H, such as the bubble domain state and quadruple-block-domain state etc. The spin configurations of these states exhibit remarkable H-dependence. In addition, the strong effects of geometry and size on the spin configurations of nanostructures are observed. In particular, a series of edged states occur in the circular disk-shaped lattices, and rich intricate saturated magnetization patterns appear in big lattices. It is suggested that the magnetic states can be manipulated by varying the perpendicular anisotropy, magnetic field, and geometry/size of the nanostructures. Furthermore, the stability (retention capacity) of the saturated magnetization states upon varying magnetic field is predicted, suggesting the potential applications of these saturated magnetization states in magnetic field-controlled data storages.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Electronic properties of graphene nanoribbons: A density functional investigation

Density functional theory calculations have been performed on graphene nano ribbons (GNRs) to investigate the electronic properties as a function of chirality, size and hydrogenation on the edges. The calculations were performed on GNRs with armchair and zigzag configurations with 28, 34, 36, 40, 50, 56, 62, 66 carbon atoms. The structural stability of AGNR and ZGNR increases with the size of nanoribbon where as hydrogenation of GNR tends to lowers their structural stability. All GNRs considered have shown semiconducting behavior with HOMO-LUMO gap decreasing with the increase in the GNR size. The hydrogenation of GNR decreases its HOMO-LUMO gap significantly. The results are in agreement with the available experimental and theoretical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

The Parareal Method for Solving Space-Dependent Neutron Kinetics Equations in Hexagonal-z Geometry

Neutron kinetics plays an important role in reactor safety and analysis. The backward Euler method is the most widely used time integration method in the calculation of space-dependent nuclear reactor kinetics. Xia (2006) used this method to discretize the derivative of flux, and adopted the analytic integration to discretize the delayed neutron precursor concentrations. Diagonally Implicit Runge-Kutta (DIRK) method owns high accuracy and excellent stability, and it was applied in the rectangle core for calculating core the nuclear reactor kinetics by Wenbo Zhao (2013). Recently, DIRK was applied to the neutron kinetics for hexagonal-z geometry application (CAI, 2016). As solving the neutron kinetics equations is very time-consuming and the number of available cores continues to increase with parallel architectures evolving, parallel algorithms need to be designed in order to effectively utilize the available resources. However, it is difficult to parallel in time axis because the later moment is strongly dependent on the previous moment. Some methods have been proposed to parallel in time algorithm over the last decades. One of the famous methods to realize time parallelism is the Parareal algorithm (Lions, 2001), which offers a promising approach to increase the degree of concurrency. More than one decade from this method first proposed, this method has been studied and applied in the many fields of applied mathematics, physics, chemistry, parallel computing, etc. Fischer (2014 applied the Parareal method in the field of the Navier-Stokes Equations. Baudron (2014) combined the Parareal method with finite element method to solve the neutron kinetics equations, where the Parareal method was implemented based on the implicit Euler method or method. In this paper, the Parareal method is studied in the hexagonal-z geometry with the help of DIRK developed for neutron kinetics equations (CAI, 2016)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Ti{sub 3}GaC{sub 2} and Ti{sub 3}InC{sub 2}: First bulk synthesis, DFT stability calculations and structural systematics

A simple methodology for identifying possible higher order M{sub n+1}AX{sub n} phases (n≥2) from the chemical characteristics of known phases was developed. The method was used to identify two potential M{sub 3}AC{sub 2} phases Ti{sub 3}GaC{sub 2} and Ti{sub 3}InC{sub 2}. After verifying that the n=1 MAX phases in these systems could be synthesised in bulk using a simple pressureless reactive sintering process, the new phases were synthesised using the same method. DFT calculations were used to test the thermodynamic stability of the new phases against the known competing phases within the same ternary systems. Both were found to be stable although Ti{sub 3}InC{sub 2} only marginally so. Crystal structure refinements and comparison to other MAX phases revealed a linear increase in the c-axis length as a function of the atomic radius of the A element. - Highlights: • Chemical systematics were used to highlight a search window for new MAX phases. • Two new higher order MAX phases, Ti{sub 3}InC{sub 2} and Ti{sub 3}GaC{sub 2}, were synthesised. • Pressureless reactive sintering was effective in producing bulk material. • DFT calculations indicate that the new phases are stable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Mixed finite-element method for multi-term time-fractional diffusion and diffusion-wave equations

In this paper, numerical theory based on the mixed finite-element method and finite difference analog of the Caputo fractional derivative for multi-term time-fractional diffusion equations and diffusion-wave equations is analyzed. The unconditional stability and convergence results are proved for the two resulting fully discrete schemes. Finally, the obtained results are supported by numerical experiments carried out for some test problems.

97 MATHEMATICS AND COMPUTING↗