Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Investigation of Optimal Control Allocation for Gust Load Alleviation in Flight Control

Advances in sensors and avionics computation power suggest real-time structural load measurements could be used in flight control systems for improved safety and performance. A conventional transport flight control system determines the moments necessary to meet the pilot's command, while rejecting disturbances and maintaining stability of the aircraft. Control allocation is the problem of converting these desired moments into control effector commands. In this paper, a framework is proposed to incorporate real-time structural load feedback and structural load constraints in the control allocator. Constrained optimal control allocation can be used to achieve desired moments without exceeding specified limits on monitored load points. Minimization of structural loads by the control allocator is used to alleviate gust loads. The framework to incorporate structural loads in the flight control system and an optimal control allocation algorithm will be described and then demonstrated on a nonlinear simulation of a generic transport aircraft with flight dynamics and static structural loads.

Frost, Susan A.↗

Climate vs Energy Security: Quantifying the Trade-offs of BECCS Deployment and Overcoming Opportunity Costs on Set-Aside Land

Bioenergy with carbon capture and storage (BECCS) sits at the nexus of the climate and energy security. We evaluated trade-offs between scenarios that support climate stabilization (negative emissions and net climate benefit) or energy security (ethanol production). Our spatially explicit model indicates that the foregone climate benefit from abandoned cropland (opportunity cost) increased carbon emissions per unit of energy produced by 14–36%, making geologic carbon capture and storage necessary to achieve negative emissions from any given energy crop. The toll of opportunity costs on the climate benefit of BECCS from set-aside land was offset through the spatial allocation of crops based on their individual biophysical constraints. Dedicated energy crops consistently outperformed mixed grasslands. We estimate that BECCS allocation to land enrolled in the Conservation Reserve Program (CRP) could capture up to 9 Tg C year –1 from the atmosphere, deliver up to 16 Tg CE year –1 in emissions savings, and meet up to 10% of the US energy statutory targets, but contributions varied substantially as the priority shifted from climate stabilization to energy provision. Furthermore, our results indicate a significant potential to integrate energy security targets into sustainable pathways to climate stabilization but underpin the trade-offs of divergent policy-driven agendas.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Data for Climate vs Energy Security: Quantifying the Trade-offs of BECCS Deployment and Overcoming Opportunity Costs on Set-Aside Land

Bioenergy with carbon capture and storage (BECCS) sits at the nexus of the climate and energy security. We evaluated trade-offs between scenarios that support climate stabilization (negative emissions and net climate benefit) or energy security (ethanol production). Our spatially explicit model indicates that the foregone climate benefit from abandoned cropland (opportunity cost) increased carbon emissions per unit of energy produced by 14–36%, making geologic carbon capture and storage necessary to achieve negative emissions from any given energy crop. The toll of opportunity costs on the climate benefit of BECCS from set-aside land was offset through the spatial allocation of crops based on their individual biophysical constraints. Dedicated energy crops consistently outperformed mixed grasslands. We estimate that BECCS allocation to land enrolled in the Conservation Reserve Program (CRP) could capture up to 9 Tg C year–1 from the atmosphere, deliver up to 16 Tg CE year–1 in emissions savings, and meet up to 10% of the US energy statutory targets, but contributions varied substantially as the priority shifted from climate stabilization to energy provision. Our results indicate a significant potential to integrate energy security targets into sustainable pathways to climate stabilization but underpin the trade-offs of divergent policy-driven agendas.

Field Data↗

Phase diagram of ammonium nitrate

Ammonium Nitrate (AN) is a fertilizer, yet becomes an explosive upon a small addition of chemical impurities. The origin of enhanced chemical sensitivity in impure AN (or AN mixtures) is not well understood, posing significant safety issues in using AN even today. To remedy the situation, we have carried out an extensive study to investigate the phase stability of AN and its mixtures with hexane (ANFO–AN mixed with fuel oil) and Aluminum (Ammonal) at high pressures and temperatures, using diamond anvil cells (DAC) and micro-Raman spectroscopy. The results indicate that pure AN decomposes to N{sub 2}, N{sub 2}O, and H{sub 2}O at the onset of the melt, whereas the mixtures, ANFO and Ammonal, decompose at substantially lower temperatures. The present results also confirm the recently proposed phase IV-IV{sup ′} transition above 17 GPa and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400°C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Meso-scale Instability Triggered by Dust Feedback in Dusty Rings: Origin and Observational Implications

High spatial resolution observations of protoplanetary disks by ALMA have revealed many substructures that are providing interesting constraints on disk physics as well as dust dynamics, both of which are essential for understanding planet formation. We carry out high-resolution, 2D global hydrodynamic simulations, including the effects of dust feedback, to study the stability of dusty rings. When the ring edges are relatively sharp and the dust surface density becomes comparable to the gas surface density, we find that dust feedback enhances the radial gradients of both the azimuthal velocity profile and the potential vorticity profile at the ring edges. This eventually leads to instabilities on meso-scales (spatial scales of several disk scale heights), causing dusty rings to be populated with many compact regions with highly concentrated dust densities. We also produce synthetic dust emission images using our simulation results and discuss the comparison between simulations and observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Control law design to meet constraints using SYNPAC-synthesis package for active controls

Major features of SYNPAC (Synthesis Package for Active Controls) are described. SYNPAC employs constrained optimization techniques which allow explicit inclusion of design criteria (constraints) in the control law design process. Interrelationships are indicated between this constrained optimization approach, classical and linear quadratic Gaussian design techniques. Results are presented that were obtained by applying SYNPAC to the design of a combined stability augmentation/gust load alleviation control law for the DAST ARW-2.

Adams, W. M., Jr.↗

Habitable zones around main sequence stars

A mechanism for stabilizing climate on the earth and other earthlike planets is described, and the physical processes that define the inner and outer boundaries of the habitable zone (HZ) around the sun and main sequence stars are discussed. Physical constraints on the HZ obtained from Venus and Mars are taken into account. A 1D climate model is used to estimate the width of the HZ and the continuously habitable zone around the sun, and the analysis is extended to other main sequence stars. Whether other stars have planets and where such planets might be located with respect to the HZ is addressed. The implications of the findings for NASA's SETI project are considered.

Kasting, James F.↗

Development of Countermeasures to Aid Functional Egress from the Crew Exploration Vehicle Following Long Duration Spaceflight

Astronauts experience disturbances in sensorimotor function following their return to Earth due to adaptive responses that occur during exposure to the microgravity conditions of space flight. As part of the Crew Exploration Vehicle design requirements, the crewmember adapted to the microgravity state may need to egress the vehicle within a few minutes for safety and operational reasons in various sea state conditions following a water landing. The act of emergency egress includes and is not limited to rapid motor control tasks (including both fine motor such as object manipulation and gross motor such as opening a hatch) and visual acuity tasks while maintaining spatial orientation and postural stability in time to escape safely. Exposure to even low frequency motions (0.2-2.0 Hz) induced by sea conditions surrounding a vessel can cause significant fine and gross motor control problems affecting critical functions. These motion frequencies coupled with the varying sea state conditions (frequencies ranging from 0.125-0.5 Hz) cause performance deficits by affecting the efficacy of motor and visual acuity dependent skills in tasks critical to emergency egress activities such as visual monitoring of displays, actuating discrete controls, operating auxiliary equipment and communicating with Mission Control and recovery teams. Thus, during exploration class missions the sensorimotor disturbances due to the crewmember's adaptation to microgravity may lead to disruption in the ability to maintain postural stability and perform functional egress tasks during the initial introduction to the Earth's gravitational environment. At present, the functional implication of the interactions between a debilitated crewmember during readaptation to Earth s gravity and the environmental constraints imposed by a water landing scenario is not defined and no operational countermeasure has been implemented to mitigate this risk. Stochastic resonance (SR) is a mechanism whereby noise can assist and hence enhance the response of neural systems to relevant, subthreshold sensory signals. Application of subthreshold stochastic resonance noise coupled to sensory input either through the proprioceptive, visual or vestibular sensory systems, has been shown to improve motor function. Crew members who have adapted to microgravity have acquired new sensorimotor strategies that take time to discard. We hypothesize that detection of time-critical subthreshold sensory signals will play a crucial role in improving strategic responses and thus the rate of skill re-acquisition will be faster, leading to faster recovery of function during their re-adaptation to Earth G. Therefore, we expect the use of stochastic resonance mechanisms will enhance the acquisition of new strategic abilities. This process should ensure rapid restoration of functional egress capabilities during the initial return to Earth G after prolonged space flight. Therefore, the overall goals of this project are to investigate performance of motor and visual tasks during varying sea state conditions and develop a countermeasure based on stochastic resonance that could be implemented to enhance sensorimotor capabilities with the aim of facilitating rapid adaptation to Earth s gravity, allowing rapid CEV egress on water in varying sea states following long-duration space flight.

Mulavara, Ajitkumar↗

Countermeasures for Mitigation of Sensorimotor Decrements Following Head-Down Bed Rest

BACKGROUND Decrements in functional performance of tasks requiring postural and locomotor control remain common among crewmembers returning to Earth after6months on the International Space Station (ISS). These impairments will presumably be exacerbated after longer exploration-class missions with fewer exercise hardware options. Our recent studies suggest that an in-flight proprioceptive countermeasure may keep the proprioceptive system tuned to respond to upright balance challenges in a gravitational environment. Before testing a proprioceptive countermeasure in-flight, we must conduct an initial proof-of-concept study to determine its potential efficacy in a controlled unloading analog setting. OBJECTIVES We will determine if proprioceptive training during 60 days of 6° head down bed rest (HDBR) mitigates declines in functional task performance. We consider it critical to characterize the interaction between proprioceptive training and exercise. Thus, we will compare 3groupsof subjects(N=12 each): a proprioceptive training group, an exercise plus proprioceptive training group, and a control group(i.e. no training or exercise).The primary outcome measure will be the well-established and operationally relevant seat egress and walk test (also referred to as the functional mobility test)performed before and after HDBR. Other functional tests will also represent high priority exploration mission tasks that require high demand for dynamic control of postural stability. Additional measures will be used to identify the key physiological factors contributing to countermeasure benefits. COUNTERMEASURE METHODS We will use a ground version of our countermeasure to test the efficacy of proprioceptive training while maintaining HDBR constraints. Subjects will remain in the horizontal supine position on a sled that moves freely on air-bearings, similar to a puck on an air hockey table. Subjects will be loaded axially up to one full body weight via lateral cable pulleys towards their feet on an instrumented tilt board using a harness and weights system. Visual feedback of board tilt will be used to guide subjects while they make active tilts. Exercise and proprioceptive training prescriptions will represent those expected to be implemented during exploration spaceflight missions(e.g.20-minute proprioceptive training sessions3 times per week). RELEVANCE The deliverable from this project will be a proof-of-concept countermeasure design that has been fully assessed for efficacy in a spaceflight analog. The findings and lessons learned from this study will be translated for validation of this countermeasure on the ISS. An effective countermeasure will be added to the suite of operationally implemented in-flight sensorimotor countermeasures.

T R Macaulay↗

Cold Commissioning Simulant Selection for the Hanford Tank Waste Treatment Plant LAW Facility - 18465

Commissioning the Low-Activity Waste (LAW) Facility of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will require large volumes (∼2,000,000 liters) of a non-radioactive, chemically analogous waste simulant. Cold commissioning will provide for operator training in an integrated facility, demonstration of mechanical process equipment capacity, environmental performance demonstration of emissions control systems, and process control systems shakedown and tuning. Selection of the cold commissioning simulant is following a structured four-phase process to arrive at the preferred composition and recipe. Phases I, II and III are complete. Phase I laid the framework for decision making with preparation of a Project Management Plan, an update to the Simulant Development, Approval, Validation, and Documentation procedure, and a kickoff meeting to gather stakeholder input into the simulant definition and selection criteria. Phase II consisted of a comprehensive literature search and compilation of LAW simulant recipes, followed by initial screening against the selection criteria identified in Phase I. This process identified 72 candidate simulant recipes and down-selected 9 for further study. Phase III studies involved a) statistical comparisons of the similarity of candidate simulant compositions to the tank waste feed vector, b) process modelling of the commissioning sequence with each simulant to estimate glass former and simulant material consumption, offgas and effluent volumes and compositions, and product glass volumes and compositions, and c) evaluation of simulants against the immobilized LAW glass composition algorithm to determine allo able waste loading to ensure compliance with product specifications and process constraints. The results of these studies identified two of the candidate recipes to be carried forward to full-scale testing. Phase IV consists of testing these two recipes at vendor facilities to determine scalability, fabricability, and stability of the simulants when produced at industrial scale. Scalability is the ability to take a recipe from bench scale (1 to 40 liters) batch size to full scale (>35,000 liters) batch size. Fabricability is the ability of a recipe to be prepared in large batches without the need for complex or expensive mechanical equipment, heating, or cooling systems. Stability is the ability of a simulant to withstand long term storage and variations in environmental conditions without unacceptable changes in key characteristics (the set of chemical, physical, and rheological parameters that the simulant is intended to exhibit during cold commissioning tests). Simulants will also be tested for compatibility with other startup material (i.e., frit), tuning simulants, and environmental performance demonstration test spiking solutions to ensure against unexpected situations. Using a structured process is essential when making high impact decisions such as waste simulant selection. Proper planning and a clear explanation of how the decision process will unfold is key to obtaining stakeholder buy-in as more information is gathered. The documentation resulting from this structured selection process will be compiled and summarized in a Cold Commissioning Simulant Definition deliverable due to the Department of Energy 24 months before the start of Cold Commissioning. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dark Matter in the Heavens and at Colliders: Models and Constraints

In this dissertation, we investigate various aspects of dark matter detection and model building. Motivated by the cosmic ray positron excess observed by PAMELA, we construct models of decaying dark matter to explain the excess. Specifically we present an explicit, TeV-scale model of decaying dark matter in which the approximate stability of the dark matter candidate is a consequence of a global symmetry that is broken only by instanton-induced operators generated by a non-Abelian dark gauge group. Alternatively, the decaying operator can arise as a Planck suppressed correction in a model with an Abelian discrete symmetry and vector-like states at an intermediate scale that are responsible for generating lepton Yukawa couplings. A flavor-nonconserving dark matter decay is also considered in the case of fermionic dark matter. Assuming a general Dirac structure for the four-fermion contact interactions of interest, the cosmic-ray electron and positron spectra were studied. We show that good fits to the current data can be obtained for both charged-leptonflavor- conserving and flavor-violating decay channels. Motivated by a possible excess of gamma rays in the galactic center, we constructed a supersymmetric leptophilic higgs model to explain the excess. Finally, we consider an improvement on dark matter collider searches using the Razor analysis, which was originally utilized for supersymmetry searches by the CMS collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formulation, Pretreatment, and Densification Options to Improve Biomass Specifications for Co-Firing High Percentages with Coal

There is a growing interest internationally to use more biomass for power generation, given the potential for significant environmental benefits and long-term fuel sustainability. However, the use of biomass alone for power generation is subject to serious challenges, such as feedstock supply reliability, quality, and stability, as well as comparative cost, except in situations in which biomass is locally sourced. In most countries, only a limited biomass supply infrastructure exists. Alternatively, co-firing biomass alongwith coal offers several advantages; these include reducing challenges related to biomass quality, buffering the system against insufficient feedstock quantity, and mitigating the costs of adapting existing coal power plants to feed biomass exclusively. There are some technical constraints, such as low heating values, low bulk density, and grindability or size-reduction challenges, as well as higher moisture, volatiles, and ash content, which limit the co-firing ratios in direct and indirect co-firing. To achieve successful co-firing of biomass with coal, biomass feedstock specifications must be established to direct pretreatment options in order to modify biomass materials into a format that is more compatible with coal co-firing. The impacts on particle transport systems, flame stability, pollutant formation, and boiler-tube fouling/corrosion must also be minimized by setting feedstock specifications, which may include developing new feedstock composition by formulation or blending. Some of the issues, like feeding, co-milling, and fouling, can be overcome by pretreatment methods including washing/leaching, steam explosion, hydrothermal carbonization, and torrefaction, and densification methods such as pelletizing and briquetting. Integrating formulation, pretreatment, and densification will help to overcome issues related to physical and chemical composition, storage, and logistics to successfully co-fire higher percentages of biomass ( > 40%) with coal.

09 BIOMASS FUELS↗

Thin tailored composite wing for civil tiltrotor

The tiltrotor aircraft is a flight vehicle which combines the efficient low speed (i.e., take-off, landing, and hover) characteristics of a helicopter with the efficient cruise speed of a turboprop airplane. A well-known example of such vehicle is the Bell-Boeing V-22 Osprey. The high cruise speed and range constraints placed on the civil tiltrotor require a relatively thin wing to increase the drag-divergence Mach number which translates into lower compressibility drag. It is required to reduce the wing maximum thickness-to-chord ratio t/c from 23% (i.e., V-22 wing) to 18%. While a reduction in wing thickness results in improved aerodynamic efficiency, it has an adverse effect on the wing structure and it tends to reduce structural stiffness. If ignored, the reduction in wing stiffness leads to susceptibility to aeroelastic and dynamic instabilities which may consequently cause a catastrophic failure. By taking advantage of the directional stiffness characteristics of composite materials the wing structure may be tailored to have the necessary stiffness, at a lower thickness, while keeping the weight low. The goal of this study is to design a wing structure for minimum weight subject to structural, dynamic and aeroelastic constraints. The structural constraints are in terms of strength and buckling allowables. The dynamic constraints are in terms of wing natural frequencies in vertical and horizontal bending and torsion. The aeroelastic constraints are in terms of frequency placement of the wing structure relative to those of the rotor system. The wing-rotor-pylon aeroelastic and dynamic interactions are limited in this design study by holding the cruise speed, rotor-pylon system, and wing geometric attributes fixed. To assure that the wing-rotor stability margins are maintained a more rigorous analysis based on a detailed model of the rotor system will need to ensue following the design study. The skin-stringer-rib type architecture is used for the wing-box structure. The design variables include upper and lower skin ply thicknesses and orientation angles, spar and rib web thicknesses and cap areas, and stringer cross-sectional areas. These design variables will allow the maximum tailoring of the structure to meet the design requirements most efficiently. Initial dynamic analysis has been conducted using MSC/NASTRAN to determine the baseline wing's frequencies and mode shapes. For the design study we intend to use the finite-element based code called WIDOWAC (Wing Design Optimization With Aeroeastic Constraints) that was developed at NASA Langley in early 1970's for airplane wing structural analysis and preliminary design. Currently, the focus is on modification and validation of this code which will be used for the civil tiltrotor design efforts.

Rais-Rohani, Masoud↗

Bound-preserving finite element approximations of the Keller–Segel equations

We report this paper aims to develop numerical approximations of the Keller–Segel equations that mimic at the discrete level the lower bounds and the energy law of the continuous problem. We solve these equations for two unknowns: the organism (or cell) density, which is a positive variable, and the chemoattractant density, which is a non-negative variable. We propose two algorithms, which combine a stabilized finite element method and a semi-implicit time integration. The stabilization consists of a nonlinear artificial diffusion that employs a graph-Laplacian operator and a shock detector that localizes local extrema. As a result, both algorithms turn out to be nonlinear and can generate cell and chemoattractant numerical densities fulfilling lower bounds. However, the first algorithm requires a suitable constraint between the space and time discrete parameters, whereas the second one does not. We design the latter to attain a discrete energy law on acute meshes. We report some numerical experiments to validate the theoretical results on blowup and nonblowup phenomena. In the blowup setting, we identify a locking phenomenon that relates the L ∞ (Ω)-norm to the L 1 (Ω)-norm limiting the growth of the singularity when supported on a macroelement.

97 MATHEMATICS AND COMPUTING↗

A variational multiscale immersed meshfree method for heterogeneous materials

Abstract We introduce an immersed meshfree formulation for modeling heterogeneous materials with flexible non-body-fitted discretizations, approximations, and quadrature rules. The interfacial compatibility condition is imposed by a volumetric constraint, which avoids a tedious contour integral for complex material geometry. The proposed immersed approach is formulated under a variational multiscale based formulation, termed the variational multiscale immersed method (VMIM). Under this framework, the solution approximation on either the foreground or the background can be decoupled into coarse-scale and fine-scale in the variational equations, where the fine-scale approximation represents a correction to the residual of the coarse-scale equations. The resulting fine-scale solution leads to a residual-based stabilization in the VMIM discrete equations. The employment of reproducing kernel (RK) approximation for the coarse- and fine-scale variables allows arbitrary order of continuity in the approximation, which is particularly advantageous for modeling heterogeneous materials. The effectiveness of VMIM is demonstrated with several numerical examples, showing accuracy, stability, and discretization efficiency of the proposed method.

36 MATERIALS SCIENCE↗

Converting an AEG Cyclotron to H{sup -} Acceleration and Extraction

Clinical Trials are under way to evaluate agents labeled with the nuclide {sup 225}Ac and its decay product {sup 213}Bi, in targeted alpha-immuno-therapy. {sup 225}Ac can be produced on a medium-energy cyclotron via the nuclear reaction {sup 226}Ra(p,n){sup 225}Ac. To demonstrate proof-of-principle, a vintage AEG cyclotron, Model E33, with an internal target, had been employed in a pilot production program at the Technical University of Munich (TUM). To enhance production capability and further support the clinical studies, the TUM facility has recently been refurbished and upgraded, adding a new external beam-line, automated target irradiation and transport systems, new laboratories, hot cells, etc.. An improved high-power rotating target has been built and installed. The AEG cyclotron itself has also been modified and upgraded to accelerate and extract H{sup -} ions. We have designed, built, and tested a new axial Penning-type ion source which is optimized for the production of H{sup -} ions. The ion source has continued to evolve through experiment and experience. Steady improvements in materials and mechanics have led to enhanced source stability, life-time, and H{sup -} production. We have also designed and built a precision H{sup -} charge-exchange beam-extraction system which is equipped with a vacuum lock. To fit within the tight mechanical constraint imposed by the narrow magnet gap, the system incorporates a novel chain-drive foil holder and foil-changer mechanism. The reconfigured cyclotron system has now been in operation for more than 1 year. Three long-duration target irradiations have been conducted. The most recent bombardment ran 160 continuous hours at a beam on target of {approx}80 microamperes for a total yield of {approx}70 milli-curies of {sup 225}Ac.

43 PARTICLE ACCELERATORS↗

Heisenberg picture approach to the stability of quantum Markov systems

Quantum Markovian systems, modeled as unitary dilations in the quantum stochastic calculus of Hudson and Parthasarathy, have become standard in current quantum technological applications. This paper investigates the stability theory of such systems. Lyapunov-type conditions in the Heisenberg picture are derived in order to stabilize the evolution of system operators as well as the underlying dynamics of the quantum states. In particular, using the quantum Markov semigroup associated with this quantum stochastic differential equation, we derive sufficient conditions for the existence and stability of a unique and faithful invariant quantum state. Furthermore, this paper proves the quantum invariance principle, which extends the LaSalle invariance principle to quantum systems in the Heisenberg picture. These results are formulated in terms of algebraic constraints suitable for engineering quantum systems that are used in coherent feedback networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Most probable states in magnetohydrodynamics

A method is developed for selecting 'most probable' MHD states compatible with certain global constraints (e.g., the energy, the toroidal magnetic flux, the total toroidal electric current, or the magnetic helicity). These states occur as the solutions of nonlinear partial differential equations which are far simpler than the original MHD equations. The stabilized Z pinch is discussed by way of illustration of the theory of probable states.

Montgomery, D.↗