Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “soybean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Atmospheric scavenging of solid rocket exhaust effluents

Solid propellant rocket exhaust was directly utilized to ascertain raindrop scavenging rates for hydrogen chloride. Two chambers were used to conduct the experiments; a large, rigid walled, spherical chamber stored the exhaust constituents, while the smaller chamber housing all the experiments was charged as required with rocket exhaust HCl. Surface uptake experiments demonstrated an HCl concentration dependence for distilled water. Sea water and brackish water HCl uptake was below the detection limit of the chlorine-ion analysis technique used. Plant life HCl uptake experiments were limited to corn and soybeans. Plant age effectively correlated the HCl uptake data. Metallic corrosion was not significant for single 20 minute exposures to the exhaust HCl under varying relative humidity. Characterization of the aluminum oxide particles substantiated the similarity between the constituents of the small scale rocket and the full size vehicles.

Fenton, D. L.↗

Global crop production forecasting: An analysis of the data system problems and their solutions

Data related problems in the acquisition and use of satellite data necessary for operational forecasting of global crop production are considered for the purpose of establishing a measurable baseline. For data acquisition the world was divided into 37 crop regions in 22 countries. These regions represent approximately 95 percent of the total world production of the selected crops of interest, i.e., wheat, corn, soybeans, and rice. Targets were assigned to each region. Limited time periods during which data could be taken (windows) were assigned to each target. Each target was assigned to a cloud region. The DSDS was used to measure the success of obtaining data for each target during the specified windows for the regional cloud conditions and the specific alternatives being analyzed. The results of this study suggest several approaches for an operational system that will perform satisfactorily with two LANDSAT type satellites.

Neiers, J.↗

Area estimation of crops by digital analysis of Landsat data

The study for which the results are presented had these objectives: (1) to use Landsat data and computer-implemented pattern recognition to classify the major crops from regions encompassing different climates, soils, and crops; (2) to estimate crop areas for counties and states by using crop identification data obtained from the Landsat identifications; and (3) to evaluate the accuracy, precision, and timeliness of crop area estimates obtained from Landsat data. The paper describes the method of developing the training statistics and evaluating the classification accuracy. Landsat MSS data were adequate to accurately identify wheat in Kansas; corn and soybean estimates for Indiana were less accurate. Systematic sampling of entire counties made possible by computer classification methods resulted in very precise area estimates at county, district, and state levels.

Bauer, M. E.↗

Stratification and sample selection for multicrop experiments

The author has identified the following significant results. A stratification was performed and sample segments were selected for an initial investigation of multicrop problems in order to support development and evaluation of procedures for using LACIE and other technologies for the classification of corn and soybeans, to identify factors likely to affect classification performance, and to evaluate problems encountered and techniques which are applicable to the crop estimation problem in foreign countries. Two types of samples, low density and high density, supporting these requirements were selected as research data set for an initial evaluation of technical issues. Looking at the geographic location of the strata, the system appears to be logical and the various segments seem to represent different conditions. This result is supportive not only of the variables and the methodology employed in the stratification, but also of the validity of the data sets employed.

Landgrebe, D. A.↗

Evaluation of several schemes for classification of remotely sensed data: Their parameters and performance

The author has identified the following significant results. Data sets for corn, soybeans, winter wheat, and spring wheat were used to evaluate the following schemes for crop identification: (1) per point Gaussian maximum classifier; (2) per point sum of normal densities classifiers; (3) per point linear classifier; (4) per point Gaussian maximum likelihood decision tree classifiers; and (5) texture sensitive per field Gaussian maximum likelihood classifier. Test site location and classifier both had significant effects on classification accuracy of small grains; classifiers did not differ significantly in overall accuracy, with the majority of the difference among classifiers being attributed to training method rather than to the classification algorithm applied. The complexity of use and computer costs for the classifiers varied significantly. A linear classification rule which assigns each pixel to the class whose mean is closest in Euclidean distance was the easiest for the analyst and cost the least per classification.

Scholz, D.↗

Effects of heavy metals on the absorbance and reflectance spectra of plants

The spectral responses of plants to various concentrations of heavy metals in their rooting media are investigated in relation to the application of remote sensing methods to the detection of vegetation under stress. Absorption photometry of chloroplasts, measurements of metal and chlorophyll concentrations and reflectance spectrometry were performed on leaves of pea, sunflower and soybean plants grown under greenhouse conditions with the addition of various concentrations of Cd, Cu, Pb and Zn to their rooting media and on leaves of oak trees growing naturally in an area of a copper-arsenic mineralization. Under laboratory conditions, the most general effect observed was growth inhibition and ultimately death, with pea plants also exhibiting changes of chlorophyll a/ chlorophyll b ratios with Cd and Cu and reflectance increases in the visible and decreases in the infrared. Although results for other species indicate that reflectance effects are dependent on species, correlations between reflectance and metal exposure is confirmed by the field investigations. It is concluded that a remote sensing system would be improved by the inclusion of bands around 1.65 and 2.20 microns to detect soil mineralization from plant spectra.

Horler, D. N. H.↗

Houston area multicrop inspection trips

The phenology of crops such as corn, cotton, soybeans, sorghum, sunflowers, and rice and their observed signatures on LANDSAT imagery was studied. This was accomplished by photographing the various crops in segments 275 and 276 located in Wharton County, Texas and comparing those photographs with LANDSAT imagery of the same dates. These comparisons gave insight as to why a particular crop growth stage appeared as a definite signature on LANDSAT and how the percentage of ground cover of various crops affected the signatures on LANDSAT imagery. Numerous crop growth stages could not be directly compared due to cloud cover during several LANDSAT overpasses.

Dunham, E. W.↗

A study of Minnesota land and water resources using remote sensing, volume 13

Progress in the use of LANDSAT data to classify wetlands in the Upper Mississippi River Valley and efforts to evaluate stress in corn and soybean crops are described. Satellite remote sensing data was used to measure particle concentrations in Lake Superior and several different kinds of remote sensing data were synergistically combined in order to identify near surface bedrock in Minnesota. Data analysis techniques which separate those activities requiring extensive computing form those involving a great deal of user interaction were developed to allow the latter to be done in the user's office or in the field.

Source record↗

System calibration of the 1.4 GHz and 5 GHz radiometers for soil moisture remote sensing

Two microwave radiometers at the frequencies of 1.4 GHz and 5 GHz were mounted on a mobile tower and used for a remote sensing of soil moisture experiment at a Beltsville Agriculture Research Center test site. The experiment was performed in October 1979 over both bare field and fields covered with grass, soybean, and corn. The calibration procedure for the radiometer systems which forms the basis of obtaining the final radiometric data product is described. It is estimated from the calibration results that the accuracy of the 1.4 GHz radiometric measurements is about + or - 3 K. The measured 5 GHz brightness temperatures over bare fields with moisture content greater than 10 percent by dry weight are about 8 K lower than those taken simultaneously at 1.4 GHz. This could be due to either (1) a 5 GHz antenna side lobe seeing the cold brightness of the sky, or (2) the thermal microwave emission from a soil being less sensitive to surface roughness at 5 GHz than at 1.4 GHz.

Wang, J.↗

General description and operation of the agro-environmental system: Crop management modeling

Input for a data management system to provide farmers with information to improve crop management practices in Virginia requires monitoring of control crops at field stations, crop surveys derived from remotely sensed aircraft data, meteorological data from synchronous satellites, and details of local agricultural conditions. Presently models are under development for determining pest problems, water balance in the soil, stages of plant maturity, and optimum planting date. The status of the Cerospora leafspot model for peanut crop management is considered. Other models under development planned relate to Cylindtocladium Blackrot and Sclerotinia blight of peanuts, cyst nematode (Globerdena solanacearum) of tobacco, and red crown rot of soybeans. A software for program for estimating precipitation and solar radiation on a statewise basis is also being developed.

Gross, E.↗

Thermal microwave emissions from vegetated fields: A comparison between theory and experiment

The radiometric measurements over bare field and fields covered with grass, soybean, corn, and alfalfa were made with 1.4 GHz and 5 GHz microwave radiometers during August - October 1978. The measured results are compared with radiative transfer theory treating the vegetated fields as a two layer random medium. It is found that the presence of a vegetation cover generally gives a higher brightness temperature T(B) than that expected from a bare soil. The amount of this T(B) excess increases in the vegetation biomass and in the frequency of the observed radiation. The results of radiative transfer calculations generally match well with the experimental data, however, a detailed analysis also strongly suggests the need of incorporating soil surface roughness effect into the radiative transfer theory in order to better interpret the experimental data.

Wang, J. R.↗

Field research on the spectral properties of crops and soils, volume 1

The experiment design, data acquisition and preprocessing, data base management, analysis results and development of instrumentation for the AgRISTARS Supporting Research Project, Field Research task are described. Results of several investigations on the spectral reflectance of corn and soybean canopies as influenced by cultural practices, development stage and nitrogen nutrition are reported as well as results of analyses of the spectral properties of crop canopies as a function of canopy geometry, row orientation, sensor view angle and solar illumination angle are presented. The objectives, experiment designs and data acquired in 1980 for field research experiments are described. The development and performance characteristics of a prototype multiband radiometer, data logger, and aerial tower for field research are discussed.

Bauer, M. E.↗

A temporal/spectral analysis of small grain crops and confusion crops

Spectral data from the LANDSAT-2 satellite were used to study the growth cycles of fields of wheat, barley, alfalfa, corn, sunflowers, soybeans, rye, flax, oats, millet, grass, and hay. Signatures of pastures, trees, and idle fallow were also studied. The growth cycles were portrayed in the form of temporal plots of the greeness-brightness transformation vector applied to average channel pixel values within the fields, all of which were in three counties in North Dakota. The plots of each crop reveal characteristics which can be used in crop classification procedures.

Johnson, W. R.↗

Evaluation of several schemes for classification of remotely sensed data

Various numerical analysis schemes for the classification of remotely sensed data are evaluated with respect to their capabilities for crop identification. A per point Gaussian maximum likelihood classifier, per point sum-of-normal-densities classifier, per point linear classifier, per point Gaussian maximum likelihood decision tree classifier and a texture-sensitive per field Gaussian maximum likelihood classifier were applied to seven sets of Landsat MSS data on several crop types and regions. The results of the implementation of the classifiers indicate that, given a representative set of training statistics, the choice of classification algorithm of the differentiation of corn and soybeans from one another and from other crop types made relatively little difference in accuracy, whereas the use of a different training method affected the accuracy significantly. In addition, the linear classifier is found to be the easiest for the analyst to use and to cost least in computer time per classification.

Hixson, M.↗

Procedure M - An advanced procedure for stratified area estimation using Landsat

Procedure M is a systematic approach to processing multispectral scanner data for classification and acreage estimation. The procedure incorporates a statistically robust mechanism for estimation while utilizing component technologies that are based on the physically expected or measured responses of the canopy, atmosphere and sensor. This paper describes Procedure M in the context of large-area agricultural applications, emphasizing three specific configurations: for winter wheat, spring small grains, and corn and soybeans.

Holmes, Q. A.↗

Spatial variability of surface temperature as related to cropping practice with implications for irrigation management

Crop stress measured using thermal infrared emission is evaluated with the stress-degree-day (SDD) concept. Throughout the season, the accumulation of SDD during the reproductive stage of growth is inversely related to yield. This relationship is shown for durum wheat, hard red winter wheat, barley, grain sorghum and soybeans. It is noted that SDD can be used to schedule irrigations for maximizing yields and for applying remotely sensed data to management of water resources. An airborne flight with a thermal-IR scanner was used to examine the variability in temperature that may exist from one field to another and to determine realistic within-field temperature variations. It was found that the airborne and the ground-based data agreed very well and that there was less variability in the fields that were completely covered with crops than those of bare soil.

Hatfield, J. L.↗

AgRISTARS: Foreign commodity production forecasting. Corn/soybean decision logic development and testing

The development and testing of an analysis procedure which was developed to improve the consistency and objectively of crop identification using Landsat data is described. The procedure was developed to identify corn and soybean crops in the U.S. corn belt region. The procedure consists of a series of decision points arranged in a tree-like structure, the branches of which lead an analyst to crop labels. The specific decision logic is designed to maximize the objectively of the identification process and to promote the possibility of future automation. Significant results are summarized.

Dailey, C. L.↗

Notes for Brazil sampling frame evaluation trip

Field notes describing a trip conducted in Brazil are presented. This trip was conducted for the purpose of evaluating a sample frame developed using LANDSAT full frame images by the USDA Economic and Statistics Service for the eventual purpose of cropland production estimation with LANDSAT by the Foreign Commodity Production Forecasting Project of the AgRISTARS program. Six areas were analyzed on the basis of land use, crop land in corn and soybean, field size and soil type. The analysis indicated generally successful use of LANDSAT images for purposes of remote large area land use stratification.

Horvath, R.↗