Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution processable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Assembly of Disordered Cocontinuous Morphologies by Multiblock Copolymers with Random Block Sequence and Length Dispersity

Among the wide variety of nanostructures accessible by self-assembly of block copolymers, cocontinuous morphologies are of great interest for separations, catalysis, sensing, and energy storage due to their ability to integrate distinct properties of the constituent polymers. Furthermore, we investigate the tendency to form disordered cocontinuous phases of multiblock copolymers (MBCs) with random block sequence and length dispersity prepared by step-growth polymerization of pre-made telechelic polymers, specifically using thiol-Michael addition between diacrylate functionalized polystyrene (PS) and poly (D,L - lactide) (PLA) chains and a small molecule dithiol. In the phase diagram so established, disordered cocontinuous nanostructures occupy a wide window (≈ 25 % vol) at a modest segregation strength of χN = 15, close to the critical value for microphase separation. At a higher segregation strength of χN = 30, only a moderately wide (≈ 10 vol %) cocontinuous window is found, with MBCs instead tending to form ordered nanostructures. Although the breadth of the cocontinuous widow is less than that found in prior work on analogous randomly end-linked copolymer networks (RECNs), the MBC architecture offers offsetting advantages in terms of solution and melt processability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An eigenvalue-based method for computing the relaxed pressure in compressible multiphase flow with N phases

The modeling of compressible multiphase flows is a decades-old area of study with many applications across various fields. Many of these application areas use stiff pressure relaxation. This process involves the solution of a nonlinear system with N + 1 equations and N + 1 unknowns, where N is the number of phases. The resolution of this system with general equations of state (EOSs) is difficult. Furthermore, nonlinear systems can admit multiple solutions, and current solution methods do not address this possibility. Very recently, a thermodynamic relaxation method was introduced, which effectively maps a relatively simple predictor equation of state onto a more complex target equation of state. In this context, the target EOSs are the chosen EOSs for the thermodynamic model. Furthermore, this thermodynamic relaxation has the benefit of simplifying the stiff pressure relaxation system of equations. In this article, we show this system reduces to a polynomial of degree N, which can be recast as an eigenvalue problem through the use of the associated companion matrix. We show that although this eigenvalue method is generally less efficient than Newton–Raphson iteration, it does not suffer from convergence issues and finds all N roots of the polynomial. Hence, the method provides a fail-safe for root-finding iterative methods and a way to address the issue of multiple solutions to the nonlinear system of equations in stiff pressure relaxation.

Eigenvalue algorithm↗
DOE OSTI2023

Recent advances of two-dimensional material additives in hybrid perovskite solar cells

Perovskite solar cells (PSCs) have become one of the state-of-the-art photovoltaic technologies due to their facile solution-based fabrication processes combined with extremely high photovoltaic performance originating from excellent optoelectronic properties such as strong light absorption, high charge mobility, long free charge carrier diffusion length, and tunable direct bandgap. However, the poor intrinsic stability of hybrid perovskites under environmental stresses including light, heat, and moisture, which is often associated with high defect density in the perovskite, has limited the large-scale commercialization and deployment of PSCs. The use of process additives, which can be included in various subcomponent layers in the PSC, has been identified as one of the effective approaches that can address these issues and improve the photovoltaic performance. Among various additives that have been explored, two-dimensional (2D) materials have emerged recently due to their unique structures and properties that can enhance the photovoltaic performance and device stability by improving perovskite crystallization, defect passivation, and charge transport. In this work, we provide a review of the recent progresses in 2D material additives for improving the PSC performance based on key representative 2D material systems, including graphene and its derivatives, transitional metal dichalcogenides, and black phosphorous, providing a useful guideline for further exploiting unique nanomaterial additives for more efficient and stable PSCs in the near future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Water dynamics in pristine and porous Ti 3 C 2 T x MXene as probed by quasielastic neutron scattering

MXenes are a novel class of two-dimensional (2D) materials whose applications in energy-storage systems have attracted substantial attention. Still, the rate performance of these materials is often diminished by sheet restacking, which is attenuated via controlled etching in H 2 SO 4 solution. With this process, micropores are formed in MXene sheets that allow transport across 2D layers. As a result, the intercalation and diffusivity of ions are facilitated resulting in improved capacitance retention at high charge-discharge rates. In the present work, we used quasielastic neutron scattering to evaluate the potential changes in water dynamics as a consequence of this mechanism by assessing the behavior of weakly and strongly confined water populations in pristine and porous MXenes. First, we have found that the porous sample accommodates a noticeably higher content of both water populations. Additionally, the fraction of mobile molecules is higher either under strong or weak confinement. Interestingly, regardless of the abundance of weakly confined water in the porous sample, no considerable changes in the dynamical behavior were detected in comparison with the dynamics measured in the pristine material. Finally, for the strongly confined populations of water, our results show that water is able to permeate the micropores introduced by etching and perform unlocalized motions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Isolating Insecurely: A Call to Arms for the Security and Privacy Community During the Time of COVID-19

The privacy question is one that has only begun to be addressed. While on one hand, many of the staunchest privacy advocates have argued for relaxation of privacy controls in order to develop better tests, “back to work” protocols, and vaccines and other treatments, the same advocates point out that any loss of privacy for the public good should be temporary, transparent, necessary, proportionate, and follow a due process. What should solutions look like for data gathering, sharing, use, and disposal; or for protocols requiring strong individual identity verification and validation?

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Cesium Removal Performance Comparisons of Crystalline Silicotitanate Media Batches with Savannah River Site Waste Simulant

The Tank Closure Cesium Removal (TCCR) system uses ion exchange columns filled with Crystalline Silicotitanate (CST) media to process radioactive waste solutions for the removal of Cs- 137. The TCCR project is currently focused on dissolving Savannah River Site (SRS) Tank 10H waste (primarily sodium salt cake solids) within the tank followed by at-tank ion exchange column treatment. Plans are underway to prepare and install a second TCCR unit at SRS. Capacity and particle size differences exist between archived (IE-911) and more recently prepared CST media batches (9120-B and 9140-B). Side-by-side comparison testing was performed to evaluate the cesium removal performance of each batch to aid in selecting the preferred CST batch and media characteristics to load into the second TCCR unit. Batch contact equilibrium and flow-through column tests have been conducted with three CST batches using an SRS Average Simulant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

High Temperature Thermal Barrier Coating Evaluation of Yttrium Aluminum Garnet for Gas Turbine Applications

The Solution Precursor Spray Process (SPPS) process has been shown to overcome the durability and property challenges of applying yttrium aluminum garnet (YAG) coating for high temperature thermal barrier coating (TBC) applications (1200°C+) but only limited testing has been performed in representative application environments. In this study, YAG coatings were developed to optimize microstructure and tailor properties for combustion components in an industrial gas turbine. Thermal conductivity, erosion resistance and furnace cycling durability were used to validate YAG properties against the standard yttria-stabilized zirconia coating (YSZ). Graded and multi-layered microstructures were applied to enhance performance while maintaining durability. Further YAG process development was required to replicate coating properties and optimize deposition on more complex fuel injector nozzle and combustion liner components. Rig testing of both components was performed and compared against the baseline YSZ coating validating the high temperature capability and lower thermal conductivity of the SPPS YAG coating. The components in both tests were cycled for a minimum of ten cycles with the fuel injector test targeting a higher operating temperature while the combustor liner operated at standard conditions. A development engine test is planned to further validate performance in a gas turbine engine of this promising material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

LANL’s Digital Supply Chain Transformation with Ariba Part 2 [Slides]

LANL’s budget continues to increase. Our annual procurement spend has increased from approximately 750 million two years ago to 1.4 Billion in FY21. Procurement for LANL is a mix of indirect and direct but had limited managed spend – more standalone orders vs master contracts. The level of transformation we were looking to achieve required a comprehensive approach, encompassing people, processes and software solutions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Microgrid Conceptual Design Guidebook | 2022

This guide is meant to assist communities – from residents to energy experts to decision makers – in developing a conceptual microgrid design that meets site-specific energy resilience goals. Using the framework described in this guidebook, stakeholders can come together and start to quantify site-specific vulnerabilities, identify the most significant risks to delivery of electricity, and establish electric outage tolerances across the community. In addition to establishing minimum service needs, this framework encourages communities to consider broader sustainability goals and policy constraints and begin to estimate up-front costs associated with the installation of alternative microgrid solutions. The framework guides a community through data collection and a high-level assessment of its needs, constraints, and priorities, prior to engaging engineers, vendors, and contractors. The first sections of this guidebook provide a high-level primer on electric systems. The latter sections include guidance for step-by-step data gathering and analysis of site conditions. The ultimate product resulting from the stepwise approach is a conceptual microgrid design. A conceptual design is defined as an initial design (10%-20% complete) that considers the specific threats, needs, limitations, and investment options for a given location. Going through this exercise and developing the conceptual microgrid design as a community ensures the same community members who will ultimately live with the solution are the developers of its foundational design. Often, these are also the very same people who understand system tolerances and needs the best and are therefore the ideal candidates for establishing these criteria. Especially when it comes to evaluating critical infrastructure, it is the community that best understands the most critical services. The framework is intended to facilitate a systematic approach to planning for resilience and provide a deeper understanding of how to use a framework to make decisions around microgrid solutions. Like many processes where tradeoffs need to be considered, this is often an iterative process. If this guide serves to help educate and empower communities who are beginning the process of deploying a microgrid, it has met the goal of its authors.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Low-cost sensors and analytics for a digital factory

ORNL Manufacturing Demonstration Facility and Perisense worked on a low-cost solution for machining process monitoring to enable a digital factory. Enabling machine connectivity for digital factors is expensive for many small to medium manufacturers. The hypothesis for the research project is that a lowcost sensor suite, which can be retrofitted to a legacy machine tool or a new machine tool, can effectively provide real-time, in-situ sensing for manufacturing processes, which can enable improvements in process performance and efficiency. The Perisense sensor node was installed on the Haas TM1 machine with a current sensor and an accelerometer. Cutting tests were performed at different process parameters and sensor data was recorded. Results show a correlation of the current sensor to the spindle load. The accelerometer, mounted on the machine base, showed a correlation to the spindle speed as well as the spindle load. The sensor data can be used to monitor the machining process and provide insights on the machine spindle load utilization.

42 ENGINEERING↗
DOE OSTI2025

Editorial: Applications of spectroscopy and chemometrics in nuclear materials analysis

Optical analysis techniques, including spectroscopy and image analysis, have many advantages when applied to the study of nuclear materials. They require small sample sizes, can be performed remotely, and can be proceduralized through consistent practice. Most importantly, they provide a wealth of information by generating multivariate data. For example, ultraviolet–visible–near-infrared absorbance spectroscopy of actinides in aqueous and organic solutions is dependent on the oxidation state, anionic complexation, and temperature. These variables are important for solution-based separation processes, and sensitivity to these factors, combined with online monitoring, can drive the efficiency and control of these processes. The morphology and chemical composition of actinide particles can also provide a vital clue to the mechanisms by which the particles were formed, providing forensic information on the origins of the particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Stochastic gradient descent algorithm for stochastic optimization in solving analytic continuation problems

We propose a stochastic gradient descent based optimization algorithm to solve the analytic continuation problem in which we extract real frequency spectra from imaginary time Quantum Monte Carlo data. The procedure of analytic continuation is an ill-posed inverse problem which is usually solved by regularized optimization methods, such like the Maximum Entropy method, or stochastic optimization methods. The main contribution of this work is to improve the performance of stochastic optimization approaches by introducing a supervised stochastic gradient descent algorithm to solve a flipped inverse system which processes the random solutions obtained by a type of Fast and Efficient Stochastic Optimization Method.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1974

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

A two year study of the major process variables associated with the manufacturing process for sealed, nickel-cadmium, areospace cells is summarized. Effort was directed toward identifying the major process variables associated with a manufacturing process, experimentally assessing each variable's effect, and imposing the necessary changes (optimization) and controls for the critical process variables to improve results and uniformity. A critical process variable associated with the sintered nickel plaque manufacturing process was identified as the manual forming operation. Critical process variables identified with the positive electrode impregnation/polarization process were impregnation solution temperature, free acid content, vacuum impregnation, and sintered plaque strength. Positive and negative electrodes were identified as a major source of carbonate contamination in sealed cells.

Miller, L.↗
NASA NTRS1974

Procedures and results related to the direct determination of gravity anomalies from satellite and terrestrial gravity data

The equations needed for the incorporation of gravity anomalies as unknown parameters in an orbit determination program are described. These equations were implemented in the Geodyn computer program which was used to process optical satellite observations. The arc dependent parameter unknowns, 184 unknown 15 deg and coordinates of 7 tracking stations were considered. Up to 39 arcs (5 to 7 days) involving 10 different satellites, were processed. An anomaly solution from the satellite data and a combination solution with 15 deg terrestrial anomalies were made. The limited data samples indicate that the method works. The 15 deg anomalies from various solutions and the potential coefficients implied by the different solutions are reported.

Rapp, R. H.↗
NASA NTRS1975

Apollo experience report: Spacecraft relative motion and recontact analyses

Potential collision or accidental recontact problems between the spacecraft and other space vehicles (or components) existed during most of the Apollo missions. These problems were identified before each Apollo flight, and appropriate solutions for eliminating or minimizing the chance of collision were determined through relative motion analyses. A summary of the identification, solution, and analysis process for some of the more significant of these separation problems is presented. In addition, the scope of responsibility, the development of the study effort, and the computer simulation development, which supported the analysis process, are described.

Mcadams, R. E.↗
NASA NTRS1977

A hermetic sealing process for large irregularly shaped hybrid microcircuit enclosures

A system for sealing vacuum baked hybrids in a dry inert atmosphere using an overlapping spot resistance weld is described. A unique electrode configuration and fixturing that permits sealing of large and irregularly shaped gold plated Kovar packages to the hermeticity requirements of MIL-STD-883 was discussed. Metallurgical considerations and comparisons to laser sealing were made. Problems encountered during the development and optimization of the process were highlighted. Solutions to plating, fixturing, warpage, weld splatter and cracked bead problems are presented.

Stahler, M. R.↗