Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

In situ Raman spectroscopy of pressure-induced phase transformations in polycrystalline TbPO 4 , DyPO 4 , and Gd x Dy (1– x ) PO 4 [ In situ Raman spectroscopy of pressure-induced phase transformations in DyPO 4 and Gd x Dy (1– x ) PO 4 ]

Xenotime DyPO 4 and Gd x Dy (1–x) PO 4 (x = 0.4, 0.5, 0.6) (tetragonal I41amd zircon structure) have been studied at ambient temperature under high pressures inside a diamond anvil cell with in situ Raman spectroscopy. The typical Raman–active modes of the xenotime structure were observed at low pressures and the appearance of new Raman peaks at higher pressures indicated a phase transformation to a lower symmetry structure—likely monoclinic. Raman mode softening was observed, resulting in a line crossing at approximately 7–8 GPa for each material and preceding the phase transformation. The onset of phase transformation for DyPO 4 occurred at a pressure of 15.3 GPa. DyPO 4 underwent a reversible phase transformation and returned to the xenotime phase after decompression. The transformation pressures of the solid solutions (Gd x Dy (1–x) PO 4 ) were in the range 10–12 GPa. The GdxDy(1–x)PO 4 solid solutions yielded partially reversible phase transformations, retaining some of the high–pressure phase spectrum while reforming xenotime peaks during decompression. The substitution of Gd into DyPO 4 decreased the transformation pressure relative to pure DyPO 4 . In conclusion, the ability to modify the phase transformation pressures of xenotime rare–earth orthophosphates by chemical variations of solid solutions may provide additional methods to improve the performance of ceramic matrix composites.

36 MATERIALS SCIENCE↗

Reactive sintering of tungsten-doped high strength ZrB{sub 2}–SiC porous ceramics using metastable precursors

Graphical abstract: - Highlights: • Tungsten-doped porous ZrB{sub 2}–SiC specimens were fabricated by reactive sintering. • Both sintering and mechanical properties were improved by doping with tungsten. • Optimum concentration to obtain high mechanical properties was W/Zr (mol) = 0.05. • Sintering might be promoted by self-accelerated diffusion. • Mechanical properties might be improved by solid solution strengthening. - Abstract: Tungsten-doped porous ZrB{sub 2}-20 vol.% SiC specimens with a high strength skeleton were fabricated by reactive sintering using metastable reactants, i.e., as-synthesized amorphous hydrous ZrO{sub 2}–WO{sub 3}/ZrO{sub 2}, amorphous boron, nanocarbon, and β-SiC. Doping with tungsten clearly promoted sintering and improved mechanical properties; the optimum tungsten concentration to obtain high mechanical properties was investigated. A single-phase solid solution (Zr,W)B{sub 2} was formed in the specimens with tungsten. We suggest that sintering was promoted by self-accelerated diffusion owing to the formation of point defects caused by doping with tungsten. The improvement of mechanical properties could be attributed to solid solution strengthening.

36 MATERIALS SCIENCE↗

Syntheses, structures, and ionic conductivities of perovskite-structured lithium–strontium–aluminum/gallium–tantalum-oxides

The ionic conductivities of new perovskite-structured lithium–strontium–aluminum/gallium–tantalum oxides were investigated. Solid solutions of the new perovskite oxides, (Li{sub x}Sr{sub 1−x})(Al{sub (1−x)/2}Ta{sub (1+x)/2})O{sub 3} and (Li{sub x}Sr{sub 1−x})(Ga{sub (1−x)/2}Ta{sub (1+x)/2})O{sub 3}, were synthesized using a ball-milled-assisted solid-state method. The partial substitution of the smaller Ga{sup +3} for Ta{sup +5} resulted in new compositions, the structures of which were determined by neutron diffraction measurements using a cubic perovskite structural model with the Pm−3m space group. Vacancies were introduced into the Sr(Li) sites by the formation of solid solutions with compositions (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3}, where the composition range of 0≤y≤0.20 was examined for x=0.2 and 0.25. The highest conductivity, 1.85×10{sup −3} S cm{sup −1} at 250 °C, was obtained for (Li{sub 0.25}Sr{sub 0.625}☐{sub 0.125})(Ga{sub 0.25}Ta{sub 0.75})O{sub 3} (x=0.25, y=0.125). Enhanced ionic conductivities were achieved by the introduction of vacancies at the A-sites. - Graphical abstract: Novel lithium-conducting oxides with the cubic perovskite structure (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3} provide a specific solid-solution region with various x and y values, exhibiting the highest ionic conductivity (1.85 S cm{sup −1} at 250 °C) for (Li{sub 0.25}Sr{sub 0.625}☐{sub 0.125})(Ga{sub 0.25}Ta{sub 0.75})O{sub 3} (x=0.25, y=0.125 in (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3}). The vacancies (☐) introduced into the A-sites contribute to the enhancement of lithium diffusion in the perovskite structure because of the enlargement of the bottleneck size and suppression of the interaction between lithium and oxygen. - Highlights: • The perovskite-structured novel Li–Sr–Al/Ga–Ta oxides were investigated. • The Ga cation offers a larger bottleneck by increasing the B−O bond length. • The greater conductivity was observed upon Ga-containing perovskite. • The ionic conductivity was improved by the introduction of vacancies into A-site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creep-Fatigue Behavior of Alloy 617 at 850°C

Creep-fatigue deformation is expected to be a significant contributor to the potential factors that limit the useful life of the Intermediate Heat Exchanger (IHX) in the Very High Temperature Reactor (VHTR) nuclear system. The IHX of a high temperature gas reactor will be subjected to a limited number of transient cycles due to start-up and shut-down operations imparting high local stresses on the component. This cycling introduces a creep-fatigue type of interaction as dwell times occur intermittently. The leading candidate alloy for the IHX is a nickel-base solid solution strengthened alloy, Alloy 617, which must safely operate near the expected reactor outlet temperature of up to 950 °C. This solid solution strengthened nickel-base alloy provides an interesting creep-fatigue deformation case study because it has characteristics of two different alloy systems for which the cyclic behavior has been extensively investigated. Compositionally, it resembles nickel-base superalloys, such as Waspalloy, IN100, and IN718, with the exception of its lower levels of Al. At temperatures above 800 °C, the microstructure of Alloy 617, however, does not contain the ordered γ’ or γ’’ phases. Thus microstructurally, it is more similar to an austenitic stainless steel, such as 316 or 304, or Alloy 800H comprised of a predominantly solid solution strengthened matrix phase with a dispersion of inter- and intragranular carbides. Previous studies of the creep-fatigue behavior of Alloy 617 at 950 °C indicate that the fatigue life is reduced when a constant strain dwell is added at peak tensile strain. This results from the combination of faster crack initiation occurring at surface-connected grain boundaries due to oxidation from the air environment along with faster, and intergranular, crack propagation resulting from the linking of extensive interior grain boundary cracking. Saturation, defined as the point at which further increases in the strain-controlled hold time duration no longer decreases the cycle life, has been observed for Alloy 617 at 950 °C at least to the investigated hold times, as illustrated through a plot of cycles to failure v. hold time in Figure 1. The 950 °C creep-fatigue data set generated by Totemeier and Tian at the 0.3% and 1.0% strain range is consistent in magnitude in terms of the cycles to failure data of that of Carroll et al., however, 0.3% strain range data did not exhibit saturation at hold times of up to 10 min. At 1.0% total strain, saturation in the number of cycles to failure was observed within the investigated peak tensile hold times of up to 10 min. The data of Carroll et al. in Figure 1 and Totemeier and Tian is also consistent in magnitude with the data of Rao and coworkers investigated at the 0.6% strain range. It should be noted that saturation in the number of cycles to failure is not present in the data published by Rao and coworkers for tensile hold times of up to 120 min. The latter testing was in a simulated primary-circuit helium gas as opposed to air and a single data point is reported for the longer hold time conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modelling Thermodynamics of Alloys for Fusion Application

This research has two main objectives: (1) The development of computational tools to evaluate alloy properties, using the information contained in thermodynamic functions. We aim at improving the ability of classical potentials to account for complex alloy behavior, and (2) The application of these tools to predict properties of alloys under irradiation, in particular the FeCr system. This semester has been very productive in the developments of both tools and algorithms. Our work aims at developing theoretical and numerical methodologies that are directly applicable to multi-scale modeling addressing the specific issues related to multi-component, multi-phase systems in non-equilibrium states, such as solid-solution hardening, point defect-solute interactions, stoichiometry effects, static and dynamic strain aging, dislocation-solute interactions, and in general the aspects of microstructure evolution that are affected by irradiation. At its present stage of development, we have been able to predict numerous thermodynamic properties of FeCr mainly related to ordering and precipitation; we have found new intermetallic phases and suggested the existence of a dependence of the solubility limit on the degree of order of the alloy. At present, we are studying dislocation mobility in the solid solution and the heterogeneous phase, and we are developing a new algorithm to perform Monte Carlo simulations inside the miscibility gap, a technique that will allow us to study interfacial energies and nucleation sizes. We develop a strategy to model radiation damage in FeCr alloys, system in which magnetism introduces an anomaly in the heat of formation of the solid solution that is at the basis of its unique behavior. Magnetism has implications for the precipitation of excess Cr in the a phase in the presence of heterogeneities. These complexities pose many challenges for atomistic (empirical) methods. To address such issues we develop a modified, many-body potential by rigorously fitting thermodynamic properties, including free energy. Multi-million atom displacement Monte Carlo simulations in the transmutation ensemble, using both our new potential and our new MC code, are able to predict properties of non equilibrium processes like heterogeneous precipitation, and dislocation - precipitate interactions, enabling the study of hardening and embrittlement under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Isodimorphism in a binary system BaBi4Ti4O15-CaBi4Ti4O15

Highlights: • Isodimorphism for two Aurivillius phases BaBi{sub 4}Ti{sub 4}O{sub 15} and CaBi{sub 4}Ti{sub 4}O{sub 15} with different symmetry was studied. • The structure of the compounds has been studied using X-ray diffraction and Raman spectroscopy. • The solid solutions with tetragonal and orthorhombic symmetry were formed in the range of 0 • The basic laws of thermal expansion for the binary system BaBi{sub 4}Ti{sub 4}O{sub 15} –CaBi{sub 4}Ti{sub 4}O{sub 15} have been established. - Abstract: Isodimorphism for two Aurivillius phases BaBi{sub 4}Ti{sub 4}O{sub 15} and CaBi{sub 4}Ti{sub 4}O{sub 15} with different symmetry was studied. Synthesis techniques have been optimized and solid solution with the composition Ba{sub 1-x}Ca{sub x}Bi{sub 4}Ti{sub 4}O{sub 15} (x – molar part of the component, x = 0, 0.25, 0.5, 0.75, 1) have been prepared. The structure of the compounds has been studied using X-ray diffraction and Raman spectroscopy. It was found that solid solutions with tetragonal and orthorhombic symmetry were formed in the range of 04Ti{sub 4}O{sub 15} –CaBi{sub 4}Ti{sub 4}O{sub 15} have been established.

36 MATERIALS SCIENCE↗

A new way of phase identification, of AgGaGeS{sub 4}∙nGeS{sub 2} crystals

The phase identification of AgGaGeS{sub 4}·nGeS{sub 2} (n=0–4) crystals grown by vertical Bridgman–Stockbarger technique was carried out to find the boundary value n between a homogeneous solid solution and its mixture with GeS{sub 2}. To obtain reliable results, the conventional methods of X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) were completed by less common vapor pressure measurement in a closed volume and precise density measurements, which are very sensitive to the detection of small amounts of crystalline and glassy GeS{sub 2} and heterogeneous state of the crystals. The boundary value n=1.5 at 1045 K and the coexistence of the solid solution AgGaGeS{sub 4}·1.5GeS{sub 2} with the β-GeS{sub 2} phase for n>1.5 was found. Glassy GeS{sub 2} (∼2 mol%) was revealed by vapor pressure measurement and XRD studies in all the crystals. This is discussed in terms of the supersaturated solid solution decomposition upon temperature decreasing and the microphase separation of overcooled melt near the melting point under non-equilibrium crystallization. For the first time, the p–T dependence for glassy GeS{sub 2} was measured by the vapor pressure measurements. - Graphical abstract: lg p–1/T dependences of as-grown AgGaGeS{sub 4}·nGeS{sub 2} crystals. - Highlights: • Vapor pressure measurement as a powerful tool of phase identification. • Thermal characteristics of glassy GeS{sub 2}. • The homogeneity range of AgGaGeS{sub 4} from the GeS{sub 2} side.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure investigation and magnetism of the complex metal-rich boride series Cr{sub x}(Rh{sub 1-y}Ru{sub y}){sub 7-x}B{sub 3} (x=0.88-1; y=0-1) with Th{sub 7}Fe{sub 3}-type structure

Powder samples and single crystals of the new complex boride series Cr{sub x}(Rh{sub 1-y}Ru{sub y}){sub 7-x}B{sub 3} (x=0.88-1; y=0-1) have been synthesized by arc-melting the elements under purified argon atmosphere on a water-cooled copper crucible. The products, which have metallic luster, were structurally characterized by single-crystal and powder X-ray diffraction as well as EDX measurements. Within the whole solid solution range the hexagonal Th{sub 7}Fe{sub 3} structure type (space group P6{sub 3}mc, no. 186, Z=2) was identified. Single-crystal structure refinement results indicate the presence of chromium at two sites (6c and 2b) of the available three metal Wyckoff sites, with a pronounced preference for the 6c site. An unexpected Rh/Ru site preference was found in the Ru-rich region only, leading to two different magnetic behaviors in the solid solution: The Rh-rich region shows a temperature-independent (Pauli) paramagnetism whereas an additional temperature-dependent paramagnetic component is found in the Ru-rich region. - Graphical abstract: The new complex boride series Cr{sub x}(Rh{sub 1-y}Ru{sub y}){sub 7-x}B{sub 3} (x=0.88-1; y=0-1) has been synthesized by arc melting the elements under purified argon atmosphere. Beside the 3d/4d site preference within the whole solid solution, an unexpected Rh/Ru site preference was found in the Ru-rich region only, leading to two different magnetic behaviors: The Rh-rich region shows a temperature-independent (Pauli) paramagnetism whereas an additional temperature-dependent paramagnetic component is found in the Ru-rich region. Highlights: Black-Right-Pointing-Pointer Synthesis of a new boride series fulfilling Vegard Acute-Accent s rule. Black-Right-Pointing-Pointer 3d/4d site preference. Black-Right-Pointing-Pointer Unexpected Ru/Rh site preference. Black-Right-Pointing-Pointer Rh-rich region is Pauli paramagnetic. Black-Right-Pointing-Pointer Ru-rich region is Pauli and temperature-dependent paramagnetic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doping of IV-VI semiconductors and the energy spectrum of holes with resonance states taken into account

Kinetic phenomena in the Pb{sub 0.5}Sn{sub 0.5}Te solid solution have been studied in wide ranges of concentrations and temperatures in the case of two types of acceptor doping: with overstoichiometric tellurium and with a combination of equal amounts of Na and Te atoms; in the latter case, two additives amounting to 1.0 and 1.5 at % of each element have been used. Hole densities attained in this case significantly exceeded the largest values corresponding to the Pb{sub 0.5}Sn{sub 0.5} Te:Te samples. For both types of acceptors, the hole concentration in the solid solution is found to be a factor of 2 higher than in PbTe with the same level of doping. The specific features of behavior of the Hall coefficient, thermopower, and electrical conductivity are interpreted in the context of a model of a single-valence-band spe ctrum with a wide band of resonant levels. The mechanism of formation of resonant levels in PbTe and Pb{sub 0.5}Sn{sub 0.5} Te solid solutions is discussed.

36 MATERIALS SCIENCE↗

Growth conditions, structure, Raman characterization and optical properties of Sm-doped (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} single crystals grown by the Czochralski method

The (Lu{sub x}Gd{sub 0.995-x}Sm{sub 0.005}){sub 2}SiO{sub 5} single crystals with x=0.095, 0.11, 0.15, 0.17, 0.19 0.35 and 0.5 were grown by the Czochralski method. Structural properties were investigated by X-ray diffraction measurements. Unit cell parameters and cell volume were determined by the Rietveld refinement of the collected X-ray powder spectra. The segregation features between Gd and Lu were estimated and analyzed. Vibrational properties of the solid solutions were analyzed on the basis of polarized Raman spectra acquired at 300-875 K temperature range. Absorption and emission spectra of Sm{sup 3+} ion in the crystals with different composition were analyzed in the terms of dopant energy levels, oscillator strengths of transitions and spectral features of luminescence bands in the visible range. Both structural and optical investigations revealed that change of Lu{sup 3+} content in (Lu{sub x}Gd{sub 0.995-x}Sm{sub 0.005}){sub 2}SiO{sub 5} solid solution crystals induces the phase transition from C2/c (Lu{sub 2}SiO{sub 5}) to P2{sub 1}/c (Gd{sub 2}SiO{sub 5}) structure. It was found that the break of LSO to GSO-type structure occurs at 0.15<x<0.17. - Graphical abstract: Single crystals of Sm{sup 3+}-doped (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} solid solutions have been grown by Czochralski method and characterized by various techniques. Crystal structure changes from C2/c to P2{sub 1}/c for composition with 0.15<x<0.17. Change of crystal structure causes changes in emission spectra. Highlights: Black-Right-Pointing-Pointer The (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} crystals are an alternative to LSO and GSO hosts for applications. Black-Right-Pointing-Pointer The break of the P2{sub 1}/c to C2/c structure in (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5}:Sm occurs for 0.15<x<0.17. Black-Right-Pointing-Pointer Temperature-induced phase transition from C2/c to P2{sub 1}/c up to 875 K was not observed. Black-Right-Pointing-Pointer Observed significant changes of emission spectra caused by P2{sub 1}/c to C2/c structural transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High temperature behavior of zirconium germanates

The high temperature behavior of zirconium germanates ZrGeO₄ and Zr₃GeO₈ up to 2300 °C has been studied using the original photoemission thermal analysis technique with the comprehensive physicochemical study of solid and gaseous intermediate and final products. The two-stage process of incongruent sublimation of GeO₂ was established and the phase boundary of the homogeneity range for ZrGeO₄ and Zr₃GeO₈ were deduced from the thermal analysis, X-ray diffraction and Raman spectroscopy studies. A high tendency to sintering of the final ZrO₂ product is discussed. - Graphical abstract: The decomposition of zirconium germanates leads to the formation of gaseous GeO₂ and solid sintered ZrO₂ and occurs via two stages with the formation of intermediate ZrO₂-rich solid solution. Highlights: •Thermal behavior of ZrGeO₄ and Zr₃GeO₈ was studied using the original thermal analysis technique in wide temperature range. •The decomposition occurs via two stages with the formation of intermediate ZrO₂-rich solid solution. •The decomposition of zirconium germanates leads to the formation of gaseous GeO₂ and solid sintered ZrO₂. •The temperature of decomposition is strongly depended on the total gas pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of nanoinclusions on scattering of holes and phonons and transport coefficients in Bi{sub x}Sb{sub 1-x}Te{sub 3} bulk nanostructures

One of the possible ways to increase the thermoelectric figure of merit is the use of bulk nanostructured materials fabricated by melt spinning with subsequent hot pressing or spark plasma sintering. Among a variety of nanostructure types these materials contain regions of initial solid solution with nanometer sized inclusions of different compositions. In the present work the scattering of holes and phonons on nanoinclusions in such p-Bi{sub x}Sb{sub 1-x}Te{sub 3} based materials is considered. The change of transport coefficients due to this scattering mechanism is theoretically estimated. The estimations showed that the reduction of lattice thermal conductivity (about 12-13%) for nanoinclusions of Bi{sub 2}Te{sub 3}-Sb{sub 2}Te{sub 3} solid solution with different compositions is much greater than the change in power factor. Therefore the corresponding increase of the thermoelectric figure of merit for this case is determined mainly by phonon scattering. Also it is shown that the results of estimations depend on phonon spectrum approximation, e.g. in the case of sine-shaped instead of linear phonon spectrum the estimations give two times higher thermal conductivity reduction. - Graphical abstract: Relative phonon thermal conductivity {kappa}{sub ph} change (black line) due to nanoinclusion scattering versus nanoinclusion radius a, and relative thermoelectric power factor change (red line) due to nanoinclusion scattering versus chemical potential {mu} at nanoinclusion size a=1.5 nm and U{sub 0}=-0.146 eV. Highlights: Black-Right-Pointing-Pointer p-Bi{sub x}Sb{sub 1-x}Te{sub 3} solid solutions with nanosized inclusions were considered. Black-Right-Pointing-Pointer Selective hole scattering can increase power factor at high carrier concentrations. Black-Right-Pointing-Pointer Lattice thermal conductivity estimations depend on phonon spectrum approximation. Black-Right-Pointing-Pointer Phonon scattering can reduce lattice thermal conductivity by about 12-13%. Black-Right-Pointing-Pointer The latter factor mainly determines the increase of thermoelectric efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin-glass behavior of Sn{sub 0.9}Fe{sub 3.1}N: An experimental and quantum-theoretical study

Based on comprehensive experimental and quantum-theoretical investigations, we identify Sn{sub 0.9}Fe{sub 3.1}N as a canonical spin glass and the first ternary iron nitride with a frustrated spin ground state. Sn{sub 0.9}Fe{sub 3.1}N is the end member of the solid solution Sn{sub x}Fe{sub 4−x}N (0 < x ≤ 0.9) derived from ferromagnetic γ′-Fe{sub 4}N. Within the solid solution, the gradual incorporation of tin is accompanied by a drastic weakening of the ferromagnetic interactions. To explore the dilution of the ferromagnetic coupling, the highly tin-substituted Sn{sub 0.9}Fe{sub 3.1}N has been magnetically reinvestigated. DC magnetometry reveals diverging susceptibilities for FC and ZFC measurements at low temperatures and an unsaturated hysteretic loop even at high magnetic fields. The temperature dependence of the real component of the AC susceptibility at different frequencies proves the spin-glass transition with the characteristic parameters T{sub g} = 12.83(6) K, τ{sup *} = 10{sup −11.8(2)} s, zv = 5.6(1) and ΔT{sub m}/(T{sub m} ⋅ Δlgω) = 0.015. The time-dependent response of the magnetic spins to the external field has been studied by extracting the distribution function of relaxation times g(τ, T) up to T{sub g} from the complex plane of AC susceptibilities. The weakening of the ferromagnetic coupling by substituting tin into γ′-Fe{sub 4}N is explained by the Stoner criterion on the basis of electronic structure calculations and a quantum-theoretical bonding analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and conductivity of strontium-doped cerium orthovanadates Ce{sub 1-x}Sr{sub x}VO{sub 4} (0{<=}x{<=}0.175)

A-site substituted cerium orthovanadates, Ce{sub 1-x}Sr{sub x}VO{sub 4}, were synthesised by solid-state reactions. It was found that the solid solution limit in Ce{sub 1-x}Sr{sub x}VO{sub 4} is at x=0.175. The crystal structure was analysed by X-ray diffraction and it exhibits a tetragonal zircon structure of space group I4{sub 1}/amd (1 4 1) with a=7.3670 (3) and c=6.4894 (1) A for Ce{sub 0.825}Sr{sub 0.175}VO{sub 4}. The UV-vis absorption spectra indicated that the compounds have band gaps at room temperature in the range 4.5-4.6 eV. Conductivity measurements were performed for the first time up to the strontium solid solution limit in air and in dry 5% H{sub 2}/Ar with conductivity values at 600 {sup o}C ranging from 0.3 to 30 mS cm{sup -1} in air to 30-45 mS cm{sup -1} in reduced atmosphere. Sample Ce{sub 0.825}Sr{sub 0.175}VO{sub 4} is redox stable at a temperature below 600 {sup o}C although the conductivity is not high enough to be used as an electrode for solid oxide fuel cells. - Graphical abstract: A-site substituted cerium orthovanadates Ce{sub 1-x}Sr{sub x}VO{sub 4} were synthesised by solid state reaction and their conductivities measured in air and dry 5% H{sub 2}/Ar up to the strontium solid solution limit.

36 MATERIALS SCIENCE↗

Phase-field modeling of two-dimensional solute precipitation/dissolution: Solid fingers and diffusion-limited precipitation

Two-dimensional dendritic growth due to solute precipitation was simulated using a phase-field model reported earlier [Z. Xu and P. Meakin, J. Chem. Phys. 129, 014705 (2008)]. It was shown that diffusion-limited precipitation due to the chemical reaction at the solid–liquid interface has similarities with diffusion-limited aggregation (DLA). The diffusion-limited precipitation is attained by setting the chemical reaction rate much larger compared to the solute diffusion to eliminate the effect of the interface growth kinetics. The phase-field simulation results were in reasonable agreement with the analytical solutions. The fractal solid fingers can be formed in the diffusion-limited precipitation and have a fractal dimension measured df = 1.68, close to 1.64, the fractal dimensionality of large square lattice DLA clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase-field modeling of two-dimensional solute precipitation/dissolution: Solid fingers and diffusion-limited precipitation

Two-dimensional dendritic growth due to solute precipitation was simulated using a phase-field model reported earlier [Z. Xu and P. Meakin, J. Chem. Phys. 129, 014705 (2008)]. It was shown that diffusion-limited precipitation due to the chemical reaction at the solid-liquid interface posses similarities with diffusion-limited aggregation (DLA). The diffusion-limited precipitation is attained by setting the chemical reaction rate much larger compared to the solute diffusion to eliminate the effect of the interface growth kinetics. The phase-field simulation results were in reasonable agreement with the analytical solutions. The fractal solid fingers can be formed in the diffusion-limited precipitation and have a fractal dimension measured , close to 1.64, the fractal dimensionality of large square lattice diffusion-limited aggregation (DLA) clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗