Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Design, Manufacture and Test of Cryotank Components

On the composite cryotank technology development (CCTD) project, the Boeing Company built two cryotanks as a means of advancing technology and manufacturing readiness levels (TRL and MRL) and lowering the risk of fabricating full-scale fuel containment vessels.1 CCTD focused on upper stage extended duration applications where long term storage of propellants is required. The project involved the design, analysis, fabrication, and test of manufacturing demonstration units (MDU), a 2.4 m (precursor) and a 5.5 m composite cryotank. Key design features included one-piece wall construction to minimize overall weight (eliminating the need for a bellyband joint), 3-dimensionally (3D) reinforced y-joint material to alleviate stress concentrations at the tank to skirt interface and a purge-able fluted core skirt to carry high axial launch loads. The tanks were made with OoA curing pre-impregnated (prepreg) carbon/epoxy (C/E) slit-tape tow (STT) that contained thin micro-crack resistant plies in the tank wall center to impede permeation. The tanks were fabricated at Boeing's Seattle-based Advanced Development Center (ADC) using RAFP and multipiece break-down tooling. The tooling was designed and built by Janicki Industries (JI) at Sedro Woolley, Washington. Tank assemblage consisted of co-bonded dome covers, one-piece fluted core skirts and mechanical fastened cover/sump. Ultrasonic inspection was performed after every cure or bond and a structural health monitoring system (SHMS) was installed to identify potential impact damage events (in-process and/or during transportation). The tanks were low temperature tested at NASA's George C. Marshall Space Flight Center (MSFC) in Huntsville, Alabama. The testing, which consisted of a sequence of fill/drain pressure and thermal cycles using LH2, was successfully concluded in 2012 on the 2.4 m tank and in 2014 on the 5.5 m tank. Structural, thermal, and permeation performance data was obtained. 2 Critical design features and manufacturing advancements, which helped to validate 25% weight and 30% cost reduction projections, were matured. These advancements will help to guide future composite tank integration activities on next generation long duration aircraft and space launch vehicles. Because CCTD addressed innovative design features, heavy lift size scale-up, multipiece captured tooling, new generation automated material placement (AMP) equipment and OoA materials, this chapter should be of interest to educators, students and manufacturers of composite hardware and flight vehicles.

McCarville, Douglas A.↗
NASA NTRS2011

Magnetospheric Multiscale (MMS) Mission Attitude Ground System Design

This paper describes the attitude ground system (AGS) design to be used for support of the Magnetospheric MultiScale (MMS) mission. The AGS exists as one component of the mission operations control center. It has responsibility for validating the onboard attitude and accelerometer bias estimates, calibrating the attitude sensors and the spacecraft inertia tensor, and generating a definitive attitude history for use by the science teams. NASA's Goddard Space Flight Center (GSFC) in Greenbelt, Maryland is responsible for developing the MMS spacecraft, for the overall management of the MMS mission, and for mission operations. MMS is scheduled for launch in 2014 for a planned two-year mission. The MMS mission consists of four identical spacecraft flying in a tetrahedral formation in an eccentric Earth orbit. The relatively tight formation, ranging from 10 to 400 km, will provide coordinated observations giving insight into small-scale magnetic field reconnection processes. By varying the size of the tetrahedron and the orbital semi-major axis and eccentricity, and making use of the changing solar phase, this geometry allows for the study of both bow shock and magnetotail plasma physics, including acceleration, reconnection, and turbulence. The mission divides into two phases for science; these phases will have orbit dimensions of l.2xl2 Earth radii in the first phase and l.2x25 Earth radii in the second in order to study the dayside magnetopause and the nightside magnetotail, respectively. The orbital periods are roughly one day and three days for the two mission phases. Each of the four MMS spacecraft will be spin stabilized at 3 revolutions per minute (rpm), with the spin axis oriented near the ecliptic north pole but tipped approximately 2.5 deg towards the Sun line. The main body of each spacecraft will be an eight-sided platform with diameter of 3.4 m and height of 1.2 m. Several booms are attached to this central core: two axial booms of 14.9 m length, two radial magnetometer booms of 5 m length, and four radial -wire booms of 60 m length. Attitude and orbit control will use a set of axial and radial thrusters. A four-head star tracker and a slit-type digital Sun sensor (DSS) provide input for attitude determination. In addition, an accelerometer will be· used for closed-loop orbit maneuver control. The primary AGS product will be a daily definitive attitude history. Due to power limitations; the star tracker and accelerometer data will not be available at all times. However, tracker data from at least 10 percent of each orbit and continuous DSS data will be provided. An extended Kalman filter (EKF) will be used to estimate the three-axis attitude (i.e., spin axis orientation and spin phase) and rotation rate for all times when the tracker data is valid. For other times, the attitude is generated by assuming a constant angular momentum vector in the inertial frame. The DSS sun pulse will provide a timing signal to maintain an accurate spin phase. There will be times when the Sun is occulted and DSS data is not available. If this occurs at the start or end of a definitive attitude product, then the spin phase will be extrapolated using the mean rate determined by the EKF.

Sedlak, Joseph E.↗
NASA NTRS2018

Optical Coronagraphic Spectroscopy of AU Mic: Evidence of Time Variable Colors?

We present coronagraphic long slit spectra of AU Mic's debris disk taken with the STIS instrument aboard the Hubble Space Telescope. Our spectra are the first spatially-resolved, scattered light spectra of the system's disk, which we detect at projected distances between approximately 10 and 45 au. Our spectra cover a wavelength range between 5200 and 10200 Angstrom. We find that the color of AU Mic's debris disk is bluest at small (12-17 au) projected separations. These results both confirm and quantify the findings qualitatively noted by Krist et al. and are different than IR observations that suggested a uniform blue or gray color as a function of projected separation in this region of the disk. Unlike previous literature, which reported that the color of AU Mic's disk became increasingly more blue as a function of projected separation beyond approx. 30 au, we find the disk's optical color between 35 and 45 au to be uniformly blue on the southeast side of the disk and decreasingly blue on the northwest side. We note that this apparent change in disk color at larger projected separations coincides with several fast, outward moving ''features'' that are passing through this region of the southeast side of the disk. We speculate that these phenomenon might be related and that the fast moving features could be changing the localized distribution of sub-micron-sized grains as they pass by, thereby reducing the blue color of the disk in the process. We encourage follow-up optical spectroscopic observations of AU Mic to both confirm this result and search for further modifications of the disk color caused by additional fast moving features propagating through the disk.

Lomax, Jamie R.↗
NASA NTRS2014

Low-Mass Planar Photonic Imaging Sensor

Continuing on the successful progress of NIAC Phase I, this report summarizes the technical progress achieved under NIAC Phase II during the performance period September 19, 2014-June 18, 2017. During this period, the research team has made the following accomplishments: designed and layout a silica photonic integrated circuit (PIC) as a two baseline interferometric imager; constructed an experiment to utilize the two baselines for complex visibility measurement on a point source and a variable width slit; analyzed and studied the testbed results. (in collaboration with Lockheed Martin); designed and layout Si3N4 PICs for the low-resolution and high-resolution SPIDER telescope; fabricated the multi-layer Si3N4 PIC for low and high resolution SPIDER telescope; characterize the optical throughput and heater response for Si3N4 PIC for low and high resolution SPIDER telescopes; carried out imaging experiments using the Si3N4 PIC low-resolution version (in collaboration with Lockheed Martin); investigated signal-to-noise (SNR) ratio of SPIDER imager compared to the conventional panchromatic imager (in collaboration with Lockheed Martin); fulfilled the SNR simulation upon SPIDER imager (in collaboration with Lockheed Martin).

Yoo, S. J. Ben↗
NASA NTRS2018

Securing and Auto-Synchronizing Communication over Free-Space Optics Using Quantum Key Distribution and Chaotic Systems

Free-Space Optical (FSO) communication provides very large bandwidth, relatively low cost, low power, low mass of implementation, and improved security when compared to conventional Free-Space Radio-Frequency (FSRF) systems. In this paper, we demonstrate a communication protocol that demonstrates improved security and longer-range FSO communication, compared to existing FSO security techniques, such as N-slit interferometers. The protocol integrates chaotic communications with Quantum Key Distribution (QKD) techniques. A Lorenz chaotic system, which is inherently secure and auto-synchronized, is utilized for secure data communications over a classical channel, while QKD is used to exchange crucial chaotic system parameters over a secure quantum channel. We also provide a concept of operations for a NASA mission combining chaotic communications and QKD operating synergistically in an end-to-end space communications link. The experimental simulation results and analysis are favorable towards our approach.

Chaotic Communication↗
NASA NTRS2018

Extendible Boom

An asymmetric mast is disclosed that can be used for solar arrays. The asymmetric mast can have an asymmetry out of the plane of the solar blanket. The mast may include two or more booms that comprise slit tube longerons. In some embodiments, a single mast can be used with one or two solar blankets.

Turse, Dana↗
NASA NTRS2018

Motions in Prominence Barbs Observed on the Solar Limb

We analyze and discuss an example of prominence barbs observed on the limb on 2016 January 7 by the Hinode/Solar Optical Telescope in Ca II and H alpha, the Interface Region Imaging Spectrograph, with slit jaw images and Mg II spectral data, and the Solar Dynamics Observatory's Atmospheric Imaging Assembly. In the recent literature there has been a debate concerning whether these features, sometimes referred to as "tornadoes," are rotating. Our data analysis provides no evidence for systematic rotation in the barbs. We do find line-of-sight motions in the barbs that vary with location and time. We also discuss observations of features moving along the barbs. These moving features are elongated parallel to the solar limb and tend to come in clusters of features moving along the same or similar paths in the plane of the sky during a period of 10 minutes to an hour, moving toward or away from the limb. The motion may have a component along the line of sight as well. The spectral data indicate that the features are Doppler shifted. We discuss possible explanations for these features.

Kucera, T. A.↗
NASA NTRS2018

The GeoCarb Mission: One Tool in the Evolving Understanding of Methane and Carbon Monoxide Budgets

NASA plans to operate an instrument in geostationary orbit over the Americas beginning in 2022. This mission allows a coordinated study of climate-determining carbon species. Prime focus is on CO2 fluxes, but the reactive species CO and CH4 are particularly relevant to IGAC. Measurements of solar-induced fluorescence will describe plant photosynthesis contemporaneous with emissions. To outline the technology: Grating mapping spectrometery, using a single slit and four focal planes set at 0.76, 1.60, 2.07, and 2.32 microns and ~17000 resolving power. Retrieval profiting from the rich heritage of OCO-2, GOSAT, TropOMI, and GOME/SCIAMACHY. Column concentrations of CO2, CH4, and CO, with finest resolution at 3 km x 6 km. A selection of scans allowing appreciable refinement in fluxes of CO2 and CH4. Rapid re-pointing allowing at least one synoptic observation of all North and South America daily, and 3 observations through the day for selected areas.This presentation is an appeal to IGAC community to use GeoCarb to help improve the attribution of fluxes by sector and by geography. Cost constraints allow GeoCarb only limited listed goals. For example, GeoCarb aspires to constrain CH4 emissions for the whole US, closing the ~60% gap between US EPA estimation and 3-d models. Detailed CO measurements should also aid photochemical and aerosol studies. NASA's TEMPO (UV-Vis geostationary) instrument will overlap GeoCarb. Consequently, HCHO, NO2, aerosol, and CO may be intercompared, allowing elucidation of chemical sources and also transformation timescales. We expect that Sentinel-5P's TropOMI will lead the way here; geostationary imaging will allow diurnal views and reduced cloud obscuration of interesting areas. Analysis of current data suggests interesting questions: (a) puzzling XCH4 diel variations in the Amazonian rainforest; (b) time-varying CO/NO2 relationships in urban plumes. We also urge the suite of airborne and small-sat measurements needed to complete the story at fine scales.

Chatfield, Robert B.↗
NASA NTRS2018

Transient Fine-Scale Brightenings, Flows and Flux Cancellation in the Cool Arch Filament System Observed with HiC2.1

Solar active regions (ARs) contain the brightest and hottest coronal EUV (Extreme Ultra-Violet) loops - the core of an AR is typically the brightest structure inside the AR. In the present work we report fine-scale transient brightenings and flows in the coolest loops (the counterpart of chromospheric arch filament systems long observed in H-alpha filtergrams of bipolar emerging flux regions) seen in the core of an AR observed in 172 angstroms by Hi-C2.1 (High Resolution Coronal Imager, version 2.1). Some of these are rooted, at one of their feet, in mixed-polarity field in the photosphere. We complement the 5-min Hi-C2.1 data with SDO/AIA/HMI (Solar Dynamics Observatory / Atmospheric Imaging Assembly / Helioseismic and Magnetic Imager) and IRIS SJ (Interface Region Imaging Spectrograph Slit-Jaw) images and spectral data, and examine fine-scale events, flows and their photospheric magnetic field. We find counter streaming flows in the arch filament system, similar to that long observed in filaments. There are scattered fine-scale brightening events. Most, if not all, of these brightenings are at sites of converging opposite-polarity magnetic flux (implying flux cancellation, sometimes resulting from flux emergence). The fine-scale flows stem from some of the brightenings. Flux cancellation at these sites apparently results in fine-scale explosions that drive the counter streaming flows. In the IRIS spectra, we look for evidence of upflows from brightenings at ends of loops of the arch filament system.

Tiwari, Sanjiv K.↗
NASA NTRS2018

Mechanics of Bistable Two-Shelled Composite Booms

The phenomenon of bistability in single-walled composite cylindrical shells or slit tubes has been extensively studied with detailed models that represent the mechanics of these structures as they undergo large deformations from the extended to the stored state and vice versa. This study focuses on the mechanics of bistable composite booms that are formed by coupling or bonding two thin shells. A two-parameter inextensional analytical model is used to describe the behavior of the various two-shelled structures and find laminates and shell geometries of interest that induce bistability. The natural coiled diameters of all boom types are predicted analytically and compared with preliminary experimental data. Using the derived model, parametric analysis is conducted to determine optimal boom geometries that maximize stiffnesses and meet system requirements while retaining bistability.

Lee, Andrew J.↗
NASA NTRS2018

Multiple Boom Deployment

Some embodiments of the invention include a boom deployment system. The boom deployment system, for example, may include a housing, a spool, a first boom, and a second boom. The spool may be disposed within the housing and configured to rotate around an axis that is fixed relative to the housing. The first boom and/or the second boom may have a cylindrical shape in a deployed configuration, a flattened shape in a stowed configuration, and a slit that extends along the longitudinal length of the boom in the deployed configuration. The first boom and/or the second boom may be stowed in the stowed configuration flattened and wrapped around the spool. The first boom and/or the second boom may transition from the stowed configuration to the deployed configuration as the spool rotates around the axis.

Turse, Dana↗
NASA NTRS2017

Low-Mass Planar Photonic Imaging Sensor

Continuing on the successful progress of NIAC (NASA Innovative Advanced Concepts) Phase I, this report summarizes the technical progress achieved under NIAC Phase II during the performance period September 19, 2014 to June 18, 2017. During this period, the research team has made the following accomplishments: designed and layout a silica photonic integrated circuit (PIC) as a two baselineinterferometric imager; constructed an experiment to utilize the two baselines for complex visibility measurementon a point source and a variable width slit; analyzed and studied the testbed results (in collaboration with Lockheed Martin); designed and layout Si3N4 PICs for the low-resolution and high-resolution SPIDER (Segmented Planar Imaging Detector for Electro-Optical Reconnaissance) telescope; fabricated the multi-layer Si3N4 PIC for low and high resolution SPIDER telescope; characterized the optical throughput and heater response for Si3N4 PIC for low and highresolution SPIDER telescopes; carried out imaging experiments using the Si3N4 PIC low-resolution version (in collaboration with Lockheed Martin); investigated signal-to-noise (SNR) ratio of SPIDER imager compared to the conventional panchromatic imager (in collaboration with Lockheed Martin); fulfilled the SNR simulation upon SPIDER imager (in collaboration with Lockheed Martin).

Yoo, S. J. Ben↗
NASA NTRS2018

Hydrodynamic Modeling of Solar Acoustic Wave Propagation

Acoustic waves in the sun are separated into two categories: global and local. Global oscillations are excited through convection, and resonate in the solar interior. As with all resonant media, propagation of these acoustic waves is limited to specific frequencies for a given wavenumber. These modes are easily distinguished in 1-v diagrams, such as in figure 1. Global modes dominate the spectrum in the 2-5 mHz range. Local oscillations, so-called "sunquakes", are usually excited by particularly strong flares and can be observed as ring-shaped waves propagating away from the point of impact. The propagation is best displayed in a time-distance diagram, where a slit passing from the source to some distance away. Distance is displayed on the x-axis, and the time-series is plotted along the y-axis; an example is shown in figure 1, showing the sunquake induced by the Sept 2017 X-class flare.

Hydrodynamic↗
NASA NTRS2019

Lyman-Alpha Imaging Polarimetry with the CLASP2 Sounding Rocket Mission

Ultraviolet polarimetry offers a unique opportunity to explore the upper solar chromosphere and the transition region (TR) to the million-degree corona. These outer atmospheric regions play a key role in the transfer of mass and energy from the solar photosphere to the corona. With a sounding rocket experiment called the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP), in September 2015 we succeeded in obtaining the first measurement of the linear polarization produced by scattering processes in the hydrogen Lyman-alpha line of the solar disk radiation. The analysis and interpretation of such spectro-polarimetric observation allowed us to obtain information on the geometrical complexity of the corrugated surface that delineates the TR, as well as on the magnetic field strength via the Hanle effect. At the same time, the CLASP slit-jaw (SJ) optics system, which is a Lyman-alpha filter imager characterized by a FWHM (Full Width Half Maximum) equals 7 nanometers, allowed us to obtain broad-band Stokes-I and Q/I images over a large field of view. The obtained broad-band Q/I images are dominated by the scattering polarization signals of the Lyman-alpha wings, and not by the much weaker line-center signals where the Hanle effect operates. On April 11, 2019, we performed another sounding rocket experiment, called the Chromospheric LAyer Spectro-Polarimeter (CLASP2). We used the same instrument after significant modifications in order to obtain spectro-polarimetric observations of a plage and a quiet region in the Mg II h & k lines. At the same time, the CLASP2 SJ optics system allowed us to obtain broad-band Q/I and U/I images around the Lyman-alpha wavelength, in addition to the well- known SJ intensity images.

Kano, Ryouhei↗
NASA NTRS2019

X-ray Evaluation of the Marshall Grazing Incidence X-Ray Spectrometer (MaGIXS) Nickel-Replicated Mirrors

X-ray observations of astronomical objects provides diagnostics not available in any other wavelength regime, however the capability of making these observation at a high spatial resolution has proven challenging. Recently, NASA Marshall Space Flight Center (MSFC) has made good progress in employing computer numerical control (CNC) polishing techniques on electroless nickel mandrels as part of our replicated grazing incidence optics program. CNC polishing has afforded the ability to deterministically refine mandrel figure, thereby improving mirror performance. The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a MSFC-led sounding rocket instrument that is designed to make the first ever soft x-ray spectral observations of the Sun spatially resolved along a narrow slit. MaGIXS incorporates some of the first mirrors produced at MSFC using this polishing technique. Here we present the predicted mirror performance obtained from metrology, after completion of CNC polishing, as well as the results of X-ray tests performed on the MaGIXS telescope mirror before and after mounting.

MaGIXS X-ray Tests↗
NASA NTRS2019

Optical Design for CETUS a Wide-Field 1.5-m Aperture UV Payload Being Studied for a NASA Probe Class Mission Study

As part of a study funded by NASA headquarters, we are developing a probe-class mission concept called the Cosmic Evolution through UV Spectroscopy (CETUS). CETUS includes a 1.5-m aperture diameter telescope with a large field of view (FOV). CETUS includes three scientific instruments: a far ultraviolet (FUV) and near ultraviolet (NUV) imaging camera (CAM); a NUV multiobject spectrograph (MOS); and a dual-channel point/slit spectrograph (PSS) in the Lyman ultraviolet (LUV), FUV, and NUV spectral regions. The large FOV three-mirror anastigmatic (TMA) optical telescope assembly (OTA) simultaneously feeds the three separate scientific instruments. That is, the instruments view separate portions of the TMA image plane, enabling parallel operation by the three instruments. The field viewed by the MOS, whose design is based on an Offner-type spectrographic configuration to provide wide FOV correction, is actively configured to select and isolate numerous field sources using a next-generation micro-shutter array. The two-channel CAM design is also based on an Offner-like configuration. The PSS performs high spectral resolution spectroscopy on unresolved objects over the NUV region with spectral resolving power, R ~ 40,000, in an echelle mode. The PSS also performs long-slit imaging spectroscopy at R ~ 20,000 in the LUV and FUV spectral regions with two aberration-corrected, blazed, holographic gratings used in a Rowland-like configuration. The optical system also includes two fine guidance sensors, and wavefront sensors that sample numerous locations over the full OTA FOV. In-flight wavelength calibration is performed by a wavelength calibration system, and flat-fielding is also performed, both using in-flight calibration sources. We describe the current optical design of CETUS and the major trade studies leading to the design.

space sensors↗
NASA NTRS2020

Volatile Composition and Outgassing in C/2018 Y1 (IWAMOTO): Extending Detection Limits for High-Resolution IR Cometary Spectroscopy at the NASA-IRTF

We used iSHELL, the powerful high-resolution ( λ/Δλ~ 40,000) cross-dispersed IR spectrograph at the NASA-IRTF to measure the native ice composition and outgassing of moderately bright, long-period comet C/2018 Y1 (Iwamoto) (hereafter Y1) within weeks of its discovery. We measured production rates for H2O, and production rates and abundance ratios relative to H2O for eight trace molecules, including the most complete measure of cometary CH4 achieved to date. Compared with mean abundances measured among comets, our study revealed enriched CH3OH and C2H6 yet depleted CO and C2H2, perhaps indicating highly efficient H- atom addition on interstellar grains prior to their incorporation into the nucleus. The combined high spectral resolving power and broad spectral coverage of iSHELL allowed characterizing cometary composition using only three instrument settings, and its long-slit coverage allowed comparing the spatial distributions of molecular emissions and dust continuum.

DiSanti, M. A.↗
NASA NTRS2012

TPSAS-NF1676L-13555-DND

A sub-scale advanced composite shell design is evaluated to determine its potential for use on a future aircraft fuselage. Two composite shells with the same nominal 8-ply [?45/?]s layup are evaluated, where ? indicates a tow-steered ply. To build this shell, a fiber placement machine is used to steer unidirectional prepreg tows as they are placed around the circumference of a 17-inch diameter right circular cylinder. The fiber orientation angle varies continuously from 10 degrees (with respect to the shell axis of revolution) at the crown, to 45 degrees on the side, and back to 10 degrees on the keel. All 24 tows are placed at each point on every fiber path in one structure designated as the shell with overlaps. The resulting pattern of tow overlaps causes the laminate thickness to vary between 8 and 16 plies. The second shell without tow overlaps uses the capability of the fiber placement machine to cut and add tows at any point along the fiber paths to fabricate a shell with a nearly uniform 8-ply laminate thickness. Static stiffness and buckling loads of shells with tow-steered layups are compared with the performance of a baseline quasi-isotropic shell using both finite element analyses and classical strength of materials theory. These tailored, tow-steered shells were then were designed and built at the National Center for Advanced Manufacturing - Louisiana Partnership under a joint NASA-industry collaborative effort. The shells were fabricated from unidirectional IM7/8552 graphite-epoxy pre-preg slit tape material placed on a constant-diameter mandrel. An overview of the detailed design and manufacturing processes for these shells is presented, and issues encountered during their design, analysis, fabrication and post-cure evaluation are presented and discussed. Future plans for structural testing and analyses of the shells are also discussed.

K Chauncey Wu↗