Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sinter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

An epoxy-reinforced ceramic sheet as a durable solid electrolyte for solid state Na-ion batteries

In a conventional Na-ion battery system using liquid electrolyte, there are critical safety issues due to the instability of the liquid electrolyte. Na 3 Zr 2 Si 2 PO 12 (NASICON) solid electrolyte is a material that is sufficient to replace a liquid electrolyte as it has high ionic conductivity and thermal and electrochemical stability. However, as there is a large interfacial resistance in the NASICON solid electrolyte powder, even when used in combination with a polymer electrolyte, the advantageous effects of ceramics are not easily exhibited. In this study, we propose a top-down method of combining a polymer with a ceramic in which an ion transport channel is previously formed. In this method, a NASICON solid electrolyte is partially sintered to form ion transport channels. Then the NASICON solid electrolyte pores are filled with an epoxy polymer to increase the strength of the epoxy-NASICON composite electrolyte. This method demonstrates the possibility of our composite electrolyte being used as a thin and strong film. As a result of our methods, the ionic conductivity and thermal and electrochemical stability of NASICON were maintained, while the physical strength was enhanced by approximately 2 times. In addition, a capacity of 120 mA h g -1 and stability of 20 cycles were confirmed in a half cell with a Na 3 V 2 (PO 4 ) 3 cathode and Na metal. This method proposes a new direction for research regarding composite electrolytes created using an oxide-based solid electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2020

Advanced oxygen-electrode-supported solid oxide electrochemical cells with Sr(Ti,Fe)O 3–δ -based fuel electrodes for electricity generation and hydrogen production

Sr(Ti 0.3 Fe 0.7 )O 3–δ (STF) and the associated exsolution electrodes Sr 0.95 (Ti 0.3 Fe 0.63 Ru 0.07 )O 3–δ (STFR), or Sr 0.95 (Ti 0.3 Fe 0.63 Ni 0.07 )O 3–δ (STFN) are alternatives to Ni-based cermet fuel electrodes for solid oxide electrochemical cells (SOCs). They can provide improved tolerance to redox cycling and fuel impurities, and may allow direct operation with hydrocarbon fuels. However, such perovskite-oxide-based electrodes present processing challenges for co-sintering with thin electrolytes to make fuel electrode supported SOCs. Thus, they have been mostly limited to electrolyte-supported SOCs. Here, we report the first example of the application of perovskite oxide fuel electrodes in novel oxygen electrode supported SOCs (OESCs) with thin YSZ electrolytes, and demonstrate their excellent performance. The OESCs have La 0.8 Sr 0.2 MnO 3–δ –Zr 0.92 Y 0.16 O 2–δ (LSM–YSZ) oxygen electrode-supports that are enhanced via infiltration of SrTi 0.3 Fe 0.6 Co 0.1 O 3–δ , while the fuel electrodes are either Ni-YSZ, STF, STFN, or STFR. Fuel cell power density as high as 1.12 W cm –2 is obtained at 0.7 V and 800 °C in humidified hydrogen and air with the STFR electrode, 60% higher than the same cell made with a Ni-YSZ electrode. Electrolysis current density as high as –1.72 A cm –2 is obtained at 1.3 V and 800 °C in 50% H 2 O to 50% H 2 mode; the STFR cell yields a value 72% higher than the same cell made with a Ni-YSZ electrode, and competitive with the widely used conventional Ni-YSZ-supported cells. The high performance is due in part to the low resistance of the thin YSZ electrolyte, and also to the low fuel electrode polarization resistance, which decreases with fuel electrode in the order: Ni-YSZ > STF > STFN > STFR. The high performance of the latter two electrodes is due to exsolution of catalytic metal nanoparticles; the results are discussed in terms of the microstructure and properties of each electrode material, and surface oxygen exchange resistance values are obtained over a range of conditions for STF, STFN, and STFN. Furthermore, the STF fuel electrodes also provide good stability during redox cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boosted piezoelectricity with excellent thermal stability in tetragonal NaNbO 3 -based ceramics

The realization of high piezoelectric performance and excellent temperature stability simultaneously in Pb-free ceramics is the key for replacing Pb-containing perovskites in the industry. In this study, large piezoelectric performance (d 33 = 354 pC N –1 ) was achieved in a wide temperature sinterable potassium-free NaNbO 3 –BaTiO 3 –BaSnO 3 system, which is twice more than the piezoelectricity found in NaNbO 3 –BaTiO 3 binary ceramics. Structural refinement of high-energy synchrotron powder diffraction data suggests a single tetragonal structure with P4bm symmetry for the studied NaNbO 3 -based Pb-free ceramic. The results indicate that the small axial ratio favoring polarization reorientation benefits strong piezoelectricity, while the large oxygen octahedron tilt enhances the stability of the P4bm structure during the changing temperature according to the in situ high-energy synchrotron X-ray diffraction measurements and provides the foundation for the excellent thermal stability (20–100 °C) of the piezoelectric properties. Furthermore, a single tetragonal phase with a tiny axial ratio and large oxygen octahedron tilt effectively balances the piezoelectricity and thermal stability in Pb-free systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts

To elucidate the role of earth alkaline doping in perovskite-based dry reforming of methane (DRM) catalysts, we embarked on a comparative and exemplary study of a Ni-based Sm perovskite with and without Sr doping. While the Sr-doped material appears as a structure-pure Sm 1.5 Sr 0.5 NiO 4 Ruddlesden Popper structure, the undoped material is a NiO/monoclinic Sm 2 O 3 composite. Hydrogen pre-reduction or direct activation in the DRM mixture in all cases yields either active Ni/Sm 2 O 3 or Ni/Sm 2 O 3 /SrCO 3 materials, with albeit different short-term stability and deactivation behavior. The much smaller Ni particle size after hydrogen reduction of Sm 1.5 Sr 0.5 NiO 4 , and of generally all undoped materials stabilizes the short and long-term DRM activity. Carbon dioxide reactivity manifests itself in the direct formation of SrCO 3 in the case of Sm 1.5 Sr 0.5 NiO 4 , which is dominant at high temperatures. For Sm 1.5 Sr 0.5 NiO 4 , the CO : H 2 ratio exceeds 1 at these temperatures, which is attributed to faster direct carbon dioxide conversion to SrCO 3 without catalytic DRM reactivity. As no Sm 2 O 2 CO 3 surface or bulk phase as a result of carbon dioxide activation was observed for any material – in contrast to La 2 O 2 CO 3 – we suggest that oxy-carbonate formation plays only a minor role for DRM reactivity. Rather, we identify surface graphitic carbon as the potentially reactive intermediate. Graphitic carbon has already been shown as a crucial reaction intermediate in metal-oxide DRM catalysts and appears both for Sm 1.5 Sr 0.5 NiO 4 and NiO/monoclinic Sm 2 O 3 after reaction as crystalline structure. It is significantly more pronounced for the latter due to the higher amount of oxygen-deficient monoclinic Sm 2 O 3 facilitating carbon dioxide activation. Despite the often reported beneficial role of earth alkaline dopants in DRM catalysis, we show that the situation is more complex. In our studies, the detrimental role of earth alkaline doping manifests itself in the exclusive formation of the sole stable carbonated species and a general destabilization of the Ni/monoclinic Sm 2 O 3 interface by favoring Ni particle sintering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The sol–gel autocombustion as a route towards highly CO 2 -selective, active and long-term stable Cu/ZrO 2 methanol steam reforming catalysts

The adaption of the sol-gel autocombustion method to the Cu/ZrO 2 system opens new pathways for the specific optimisation of the activity, long-term stability and CO 2 selectivity of methanol steam reforming (MSR) catalysts. Calcination of the same post-combustion precursor at 400 °C, 600 °C or 800 °C allows accessing Cu/ZrO 2 interfaces of metallic Cu with either amorphous, tetragonal or monoclinic ZrO 2 , influencing the CO 2 selectivity and the MSR activity distinctly different. While the CO 2 selectivity is less affected, the impact of the post-combustion calcination temperature on the Cu and ZrO 2 catalyst morphology is more pronounced. A porous and largely amorphous ZrO 2 structure in the sample, characteristic for sol-gel autocombustion processes, is obtained at 400 °C. This directly translates into superior activity and long-term stability in MSR compared to Cu/tetragonal ZrO 2 and Cu/monoclinic ZrO 2 obtained by calcination at 600 °C and 800 °C. The morphology of the latter Cu/ZrO 2 catalysts consists of much larger, agglomerated and non-porous crystalline particles. Based on aberration-corrected electron microscopy, we attribute the beneficial catalytic properties of the Cu/amorphous ZrO 2 material partially to the enhanced sintering resistance of copper particles provided by the porous support morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ce stabilized Ni–SrO as a catalytic phase transition sorbent for integrated CO 2 capture and CH 4 reforming

Integration of carbon dioxide capture from flue gas with dry reforming of CH 4 represents an attractive approach for CO 2 utilization. The selection of a suitable bifunctional material serving as a catalyst/sorbent is the key. This paper reports Ni decorated and CeO x -stabilized SrO (SrCe 0.5 Ni 0.5 ) as a multi-functional, phase transition catalytic sorbent material. The effect of CeO x on the morphology, structure, decarbonation reactivity, and cycling stability of the catalytic sorbent was determined with TEM-EDX, XRD, in situ XRD, CH 4 -TPR and TGA. Here, cyclic process tests were conducted in a packed bed reactor. The results indicate that large Ni clusters were present on the surface of the SrNi sorbent, and the addition of CeO 2 promoted even distribution of Ni on the surface. Moreover, the Ce–Sr interaction promoted a complex carbonation/decarbonation phase-transition, i.e. SrCO 3 + CeO 2 ↔ Sr 2 CeO 4 + CO 2 as opposed to the conventional, simple carbonation/decarbonation cycles (e.g. SrCO 3 ↔ SrO + CO 2 ). This double replacement crystalline phase transition mechanism not only adjusts the carbonation/calcination thermodynamics to facilitate SrCO 3 decomposition at relatively low temperatures but also inhibits sorbent sintering. As a result, excellent activity and stability were observed with up to 91% CH 4 conversion, >72% CO 2 capture efficiency and ~100% residual O 2 capture efficiency from flue gas by utilizing the CeO 2 ↔ Ce 2 O 3 redox transition. This renders an intensified process with zero coke deposition. Moreover, the SLDRM with SrCe 0.5 Ni 0.5 has the flexibility to produce concentrated CO via CO 2 -splitting while co-producing a syngas with tunable H 2 /CO ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of alkali metal addition on catalytic performance of Ag/ZrO 2 /SBA-16 catalyst for single-step conversion of ethanol to butadiene

Here, we describe how adding Na and K to a 4Ag/4ZrO 2 /SBA-16 catalyst enhances catalytic performance for single-bed conversion of ethanol to butadiene. While adding Na and K leads to a slight decrease in conversion (i.e., ~10% loss), the production of desired butadiene is significantly increased with up to 50% improvement in productivity for the 4Ag/4ZrO 2 /SBA-16 catalyst promoted with 0.5% Na. The reasons for this improvement are a beneficial decrease in Lewis acid site concentration and higher Ag dispersion when Na or K are added, which results in decreased activity involving ethanol dehydration to ethylene and diethyl ether. A remarkable butadiene selectivity of 75% was achieved while maintaining high conversion (i.e., 90%) with 0.5Na/4Ag/4ZrO 2 /SBA-16 catalyst. A 72-hour catalyst lifetime study shows that because of higher coke formation from polymerization of desired butadiene, catalyst deactivation occurs more rapidly with the 0.5Na/4Ag/4ZrO 2 /SBA-16 (55% loss in conversion) than with 4Ag/4ZrO 2 /SBA-16 (45% loss in conversion). However, this does not alter the advantageous effect of Na addition because the butadiene yield remained higher throughout the study period for 0.5Na/4Ag/4ZrO 2 /SBA-16. A key finding is that during the reaction, Na limits sintering of Ag particles and promotes selective coking of the acid sites responsible for ethylene and diethyl ether formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Critical role of acceptor dopants in designing highly stable and compatible proton-conducting electrolytes for reversible solid oxide cells

Proton-conducting electrolytes are receiving increasing attention due to their high ionic conductivity at intermediate temperatures, enabling the operation of solid oxide cells with high energy efficiency at low cost. However, the effect of B-site dopants on the properties of doped barium hafnate-cerate electrolyte materials, especially in single cells under operating conditions, has not been systematically studied. Here we report our findings in the development of a series of proton-conducting electrolytes with a general formula of BaHf 0.1 Ce 0.7 R 0.2 O 3–δ (BHCR172, R = Yb, Er, Y, Gd, Sm). Here, the results reveal that electrical conductivity, ionic transference number, chemical stability against steam and CO 2 , and compatibility with NiO during sintering are all closely correlated with the dopant size. In particular, the reaction with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, BaHf 0.1 Ce 0.7 Yb 0.2 O 3–δ (BHCYb172) shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, proton-conducting reversible solid oxide cells (P-ReSOCs) based on the optimized electrolyte composition, BHCYb172, demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.74 W cm –2 (O 2 as the oxidant) at 600 °C in the fuel cell mode and a high current density of 2.0 A cm –2 at 1.3 V and 600 °C in the steam electrolysis mode while maintaining excellent durability for over 1000 h.

25 ENERGY STORAGE↗
DOE OSTI2022

Presentation of gas-phase-reactant-accessible single-rhodium-atom catalysts for CO oxidation, via MOF confinement of an Anderson polyoxometalate

Geometric or electronic confinement of guests within nanoporous hosts holds promise for imparting catalytic functionality, including single-metal-atom catalytic functionality, to existing materials. When the nanoporous host is a metal–organic framework (MOF), single-metal-ion catalysts have typically been installed by grafting to an open site on an inorganic node, with the node effectively becoming the support for the catalyst. This approach, however, imposes compositional constraints, as the node not only needs to be receptive to grafting, but also must be capable of stabilizing the framework against solvent evacuation, chemical exposure, and heating. Here, we show that disk-like, Anderson polyoxometalate clusters (RhMo 6 O 24 n- and Mo 7 O 24 m- ; POMs) can be confined in pore-specific and orientation-specific fashion within the hierarchically porous, Zr(IV)-based MOF, NU1K. Self-limiting loading of one cluster per pore, and associated nano-confinement, serve to isolate each POM and prevent consolidation caused by sintering. Additionally, the oriented confinement serves to expose individual rhodium atoms to candidate gas-phase reactants, while enabling the rhodium atom to employ a well-defined oxy-molybdenum cluster, rather than a MOF node, as a support. Synchrotron-based difference-electron-density maps and differential pair-distribution-function analyses of scattered X-rays establish cluster siting and orientation and confirm isolation. Nanoconfined (i.e., MOF- and POM-confined) single-rhodium(III)-atoms are catalytically competent for an illustrative gas-phase reaction, CO oxidation by O 2 , with the MOF-isolated POM enormously outperforming nonporous, MOF-free, solid (NH 4 ) 3 [H 6 RhMo 6 O 24 ]·6H 2 O. This paper highlights the value of MOF-based nano-confinement and oriented isolation of planar POMs as a means of uniformly presenting and stabilizing potent single-metal-atom catalysts, in reactant-accessible form, on well-defined supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of pretreatment conditions on Fe-ZSM-5 properties and performance for Fischer–Tropsch synthesis

Iron supported on ZSM-5 is a widely studied catalyst for Fischer–Tropsch synthesis (FTS). Iron is activated with H 2 , CO, or a mixture of CO and H 2 prior to FTS, resulting in phase transformations that make it challenging to understand structure–property relationships. Furthermore, in this work, we demonstrate that increasing the pretreatment temperature of Fe–Na-ZSM-5 reduces CO conversion irrespective of the reductant, but the product selectivity, iron particle size, composition, CO adsorption properties, and zeolite structure is dependent on both the pretreatment temperature and reductant. Pretreatment of Fe–Na-ZSM-5 in H 2 induces sintering of iron particles, increasing C 2 –C 4 olefins and C 5+ hydrocarbons selectivity from 19.0% and 14.0% at 350 °C to 28.2% and 25.4% at 770 °C, respectively. Conversely, CO pretreatment facilitates carbide formation, coke deposition, and CH 4 formation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cubic and hexagonal boron nitride phases and phase boundaries

We used temperature-dependent spark plasma sintering to induce phase transformations of metastable 3D c-BN to mixed-phase 3D/2D c-BN/h-BN and ultimately to the stable 2D h-BN phase at high temperature, useful for extreme-temperature technology.

Materials Science↗
DOE OSTI2024

Additive manufacturing of LiCoO 2 electrodes via vat photopolymerization for lithium ion batteries

Additive manufacturing has the potential to revolutionize the fabrication of lithium-ion batteries for a diversity of applications including in portable, biomedical, aerospace, and the transportation fields. Standard commercial batteries consist of stacked layers of various components (current collectors, cathode, anode, separator and electrolyte) in a two-dimensional manner. By leveraging the latest advances in additive manufacturing and computer-aided design, an improved geometric and electrochemical configuration of these batteries can maximize energy efficiency while allowing design optimization to reduce dead space for a given application. In this work, a composite UV photosensitive resin was prepared and used as feedstock in a vat photopolymerization system. The resin was loaded with LiCoO 2 acting as electrochemically active material for the cathode of a lithium-ion battery, and was further improved with the addition of conductivity-enhancing carbonaceous additives. Challenges to additive manufacturing arise from the opacity and high viscosity of the composite nature of these electrochemically-active resins, which cause light refraction during selective UV curing. Subsequently, items were printed and subjected to a thermal post-processing step to obtain an adequate compromise between electrochemical performance and mechanical integrity. Both sintered and green state 3D printed cathodes were assembled into half-cell lithium-ion batteries using lithium metal as a reference and counter electrode. Electrochemical cycling of these batteries yielded satisfactory results approaching commercial LiCoO 2 cathodes’ performance, with the potential advantages of additive manufacturing – high surface area anode–cathode configurations for power performance as well as shape conformability.

25 ENERGY STORAGE↗
DOE OSTI2026

Pivotal role of organic adsorbates for the creation of catalytic sites during dry reforming of methane

Inadvertent factors can sometimes be crucial for synthesis of catalysts. The use of polyalcohols is common in the synthesis of heterogeneous catalysts. Interactions between alcohols and heterogeneous catalysts have been shown to induce surface reconstructions that greatly impact catalytic performance. Thus, traces of these alcohol functionalities on the as-synthesized catalysts, combined with heat treatment, could be critical in the generation of catalytic sites. Here, we show that during the synthesis of a Ni–Mo/MgO catalyst using a polyol process, residual ethylene glycol (EG) on the surface plays a significant role in the generation of catalytic sites for dry reforming of methane (DRM). The as-synthesized catalyst presents dispersed cationic Ni. Under DRM reaction conditions, the presence of EG, and H2 generated in situ, promote the generation of co-localized Ni–Mo nanoparticles (NPs). Greater amount of EG in the as-synthesized catalyst prevented sintering, leading to better catalyst stability and higher rates. If the residual EG remaining post-synthesis is removed through calcination, before conducting DRM, NiO NPs are formed and the material is completely inactive for catalyzing the reaction. When using a different support, denoted MgO*, EG also proved indispensable to generate active sites, although Ni–Mo co-localization was not evident, and a combination of DRM-related species was needed to activate the catalyst, not just H2. This work systematically uncovers how the interactions between organic adsorbates, the supported metals and the catalyst support dictate the creation of catalytic active sites.

Polo Garzon, Felipe [ORNL] (ORCID:0000000265076183↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2026

Semi-Dynamic Leach Testing of Densified Silicon-based Iodine Waste Forms

Iodine waste forms (IWF) require a conceptual corrosion release model (CCRM) to provide iodine (I) release rates for performance modeling nuclear waste disposal repositories. To develop a CCRM, an understanding of the corrosion mechanisms of the IWF are required along with data from consistent test methods to parameterize the model. The present study has advanced both areas by providing and assessing the corrosion resistance of IWF types based on their processing history in minor variations of semi-dynamic leach tests. The test included a series of semi-dynamic leach tests using monolithic IWFs in deionized water (leachant). Several experiments were conducted under alternate test conditions with changes to temperature, leachant replacement, leachant pH, leachant volume, masking, and surface finish to elucidate if varying these conditions impacted IWF corrosion behavior. Tests were conducted on two classes of IWFs: (1) I-bearing silver-mordenite (AgZ) materials processed by hot isostatic pressing (HIP) at different temperatures, pressures, sizes, and times; and (2) I-bearing silver-functionalized silica aerogels (SFA) processed by either HIP or spark plasma sintering (SPS). The corrosion susceptibility of AgZ samples was influenced by HIP temperature and pressure. The SPS SFAs retained I far better than HIP SFAs. Additional findings in this study include: (1) The iodine dissolution rate decreased with decreasing temperature, (2) a common ion effect may occur and slow dissolution of the host phase if the leachant is not regularly replaced, (3) pH controls the dissolution rate, and (4) the iodine dissolution rate slows with extended test time (up to 224 days). Based on this work, these parameters should thus be represented when developing a CCRM.

corrosion↗
DOE OSTI2026

The effect of high-power transient events on tungsten and tungsten coatings used for radio frequency launcher applications

High-temperature plasma-facing material coatings used for radio frequency (RF) launchers need to be robust enough to survive RF breakdown arcing or other transient events from the plasma (e.g., an edge localized mode) without causing a catastrophic failure of the coating. High-power transient effects are being explored by using an RF-induced vacuum arc to determine the robustness of tungsten coatings made by a variety of manufacturing methods. A 1/4-wavelength resonant section of vacuum transmission line terminated with an open circuit electrode structure with a well-defined electric field (30-60 kV/mm) produces repeatable arcing conditions. The initial focus is on tungsten as a plasma-facing material, including sintered tungsten, tungsten coatings on steel produced via physical vapor deposition (PVD), and functionally graded tungsten/steel coatings deposited by low-pressure plasma-spraying (LPPS). Thin PVD coatings (1-2 microns) fail catastrophically from an arc and result in severe delamination of the coating. The arc-induced damage of thicker coatings, such as those made via LPPS, tend to be restricted to the top few microns of the surface. Arcing often initiates on sharp surface microstructures and causes localized melting of tungsten at the surface of all the materials studied and results in resolidified melt pools with surface cracks. The resolidified surface results in a reduction in overall deuterium retention when exposed to typical RF plasma sheath conditions.

Caughman, John [ORNL] (ORCID:0000000206091164)↗
DOE OSTI2020

Thermal transport in phase-stabilized lithium zirconate phosphates

The thermal properties of yttrium-stabilized lithium zirconate phosphate [LZP: Li 1+x+y Y x Zr 2-x (PO 4 ) 3 with x = 0.15, -0.2 ≤ y ≤ 0.4 and with x = 0.0, y = 0.0] are presented over a wide temperature range from 30 to 973 K, elucidating the interplay between structural phase transformations and thermal properties in a solid state superionic conducting material. At room temperature, the thermal conductivity decreases by more than 75% as the stoichiometry is changed from lithium deficient to excess and increases with increasing temperature, indicative of defect-mediated transport in the spark plasma sintered materials. The phase transformations and their stabilities are examined by x-ray diffraction and differential scanning calorimetry and indicate that the Y3 + substitution of Zr 4+ is effective in stabilizing the ionically conductive rhombohedral phase over the entire temperature range measured, the mechanism of which is found through ab initio theoretical calculations. Finally, these insights into thermal transport of LZP superionic conductors are valuable as they may be generally applicable for predicting material stability and thermal management in the ceramic electrolyte of future all-solid-state-battery devices.

36 MATERIALS SCIENCE↗