Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shadows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Automatic Computer Mapping of Terrain

Computer processing of 17 wavelength bands of visible, reflective infrared, and thermal infrared scanner spectrometer data, and of three wavelength bands derived from color aerial film has resulted in successful automatic computer mapping of eight or more terrain classes in a Yellowstone National Park test site. The tests involved: (1) supervised and non-supervised computer programs; (2) special preprocessing of the scanner data to reduce computer processing time and cost, and improve the accuracy; and (3) studies of the effectiveness of the proposed Earth Resources Technology Satellite (ERTS) data channels in the automatic mapping of the same terrain, based on simulations, using the same set of scanner data. The following terrain classes have been mapped with greater than 80 percent accuracy in a 12-square-mile area with 1,800 feet of relief; (1) bedrock exposures, (2) vegetated rock rubble, (3) talus, (4) glacial kame meadow, (5) glacial till meadow, (6) forest, (7) bog, and (8) water. In addition, shadows of clouds and cliffs are depicted, but were greatly reduced by using preprocessing techniques.

Smedes, H. W.↗
NASA NTRS1973

Studies relating to temperature control of a large scale telescope

Analytical methods are developed for estimating the circumferential and longitudinal temperature distributions in a large space telescope, idealized as a simple insulated tube with a flat mirror across one end. The effects of wall conduction, multilayer insulation, thermal coatings, heat pipes, and heated collars are analyzed, with numerical examples. For most of the study, the only thermal input to the tube was assumed to be from steady solar irradiation from one side, as in a geosynchronous orbit. Unsteady heat flow through the insulation, as in alternating sunlight and shadow of a low orbit, is briefly discussed.

Katzoff, S.↗
NASA NTRS1973

Break-up characteristics of Chena River Basin

The author has identified the following significant results. While visually analyzing ERTS-1 data for August and September, 1972, it was found that lakes as small as 200 feet in diameter were visible on the imagery. An examination of the imagery for the Minto Lakes area shows that the lakes take on their darkest appearance in MSS band 6. The Tanana River which flows through this area appears quite light in band 5, quite dark in band 7, and is almost undetectable for band 6. The significance of these data are that potential surface storage could be measured for watersheds that have substantial numbers of lakes. This potential storage would be available to both spring runoff and summer precipitation. Caution must be shown because certain clouds cast a shadow that is similar to the lake appearance. The difference of the imagery for a lake and a river of the same band is due to the sediment load for the river. The Tanana River had a heavy glacial sediment load. The area of snow cover during the fall accumulation can be mapped in detail.

Carlson, R. F.↗
NASA NTRS1972

Design and development of a brushless, direct drive solar array reorientation system

This report covers the design and development of the laboratory model, and is essentially a compilation of reports covering the system and its various parts. To enhance completeness, the final report of Phase 1 covering circuit development of the controller is also included. A controller was developed for a brushless, direct-drive, single axis solar array reorientation system for earth-pointed, passively-stabilized spacecraft. A control systems was designed and breadboard circuits were built and tested for performance. The controller is designed to take over automatic control of the array on command after the spacecraft is stabilized in orbit. The controller will orient the solar array to the sun vector and automatically track to maintain proper orientation. So long as the orbit is circular, orientation toward the sun is maintained even though the spacecraft goes into the shadow of the earth. Particular attention was given in the design to limit reaction between the array and the spacecraft.

Jessee, R. D.↗
NASA NTRS1973

Investigation of the detection and monitoring of forest insect infestation in the Sierra Nevada Mountains of California

The author has identified the following significant results. Significant progress has been made in detecting insect outbreaks from ERTS-1 data during this period. It is possible to differentiate forested areas with heavy damage from those with little or no damage. The analysis is made with color infrared positive transparencies and prints. Enlargement of the transparencies makes it possible to detect and map areas of three degrees of tree mortality into heavy, medium, and light. It was also noted that shadows cast by massive rock domes closely resemble natural lakes.

Hall, R. C.↗
NASA NTRS1972

Observations and impressions from lunar orbit

On Apollo 16, the command module pilot made observations of particular surface features and processes to complement photographic and other remotely sensed data. Emphasis was placed on geological problems that required the extreme dynamic range and color sensitivities of the human eye; repetitive observations of varying sun angles and viewing directions; and, in some cases, on-the-scene interpretations. Visual observations and impressions recorded during the mission verified the effectiveness of the hardware and techniques used. The orbiting observer functioned both as a sensor, in otherwise inaccessible areas such as earthshine and shadows, and as a designator of potentially significant data that were acquired on the photographic record.

Mattingly, T. K.↗
NASA NTRS1972

Crater morphometry, part L

Morphometric analysis of lunar craters complements the more traditional photointerpretive study of crater morphology. A sampling is presented of morphometric results for five selected medium-sized craters photographed on the Apollo 16 mission: Madler, Langrenus B, Isidorus, Capella, and King. Apollo metric camera data present the first real opportunity to evaluate previous topographic measurements in terms of accuracy rather than in terms of precision. This method of generating crater measurements furnishes far more complete data than does the shadow-length method that yielded most of the previous morphometric information on lunar craters.

Pike, R. J.↗
NASA NTRS1973

Preparation of urban land use inventories by machine-processing of ERTS MSS data

Spectral classes of urban phenomena identified from ERTS multispectral scanner data in Milwaukee included Surburban, Inner City, Industry, Grassy (open area), Road, Wooded Suburb, Water, Cloud, and Shadow. The Milwaukee spectral class statistics were used to classify the Chicago area, within the same ERTS frame, and similar results were achieved. In another ERTS frame, Marion County (Indianapolis) data were classified into similar classes. The Marion County ERTS study was supported by a land use classification of an area near downtown Indianapolis that utilized 12-band MSS data collected by aircraft from 3000 feet. The results of the ERTS analyses suggest that satellite data will be a useful tool for the urban planner for monitoring urban land use.

Todd, W.↗
NASA NTRS1972

Tornado occurrences related to overshooting cloud-top heights as determined from ATS pictures

A sequence of ATS 3 pictures including the development history of large anvil clouds near Salina, Kansas was enlarged by NASA into 8X negatives which were used to obtain the best quality prints by mixing scan lines in 8 steps to minimize checker-board patterns. These images resulted in the best possible resolution, permitting use to compute the heights of overshooting tops above environmental anvil levels based on cloud shadow relationships along with the techniques of lunar topographic mapping. Of 39 heights computed, 6 were within 15 miles of reported positions of 3 tornadoes. It was found that the tornado proximity tops were mostly less than 5000 ft, with one exception of 7000 ft, suggesting that tornadoes are most likely to occur when overshooting height decreases. In order to simulate surface vortices induced by cloud-scale rotation and updraft fields, a laboratory model was constructed. The model experiment has shown that the rotation or updraft field induces a surface vortex but their combination does prevent the formation of the surface vortex. This research leads to a conclusion that the determination of the cloud-top topography and its time variation is of extreme importance in predicting severe local storms for a period of 0 to 6 hours.

Fujita, T. T.↗
NASA NTRS1973

A study of the utilization of ERTS-1 data from the Wabash River Basin

The author has identified the following significant results. For the urban land use analysis project, classification results were good to excellent for the following classes: single family residential, commercial/industrial, cloud, cloud shadow, trees, and water. Grassy areas were defined fairly well, but residential areas located between multi-family residential and single-family residential were misclassified as grassy. Residential areas dominated by tree cover, termed wooded residential, were unable to be classified in a single class. Data points in such areas were classified randomly as either grassy or trees.

Landgrebe, D. A.↗
NASA NTRS1973

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. A possibly more accurate method to determine snowcover area change has been tried; snowcover area change over periods of an ERTS-1 cycle are very useful in determining energy balances over regional areas and to determine snow depth as a function of altitude. Also since shadow and cloud cover areas are highlighted this method may be a step toward more complete machine processing.

Meier, M. F.↗
NASA NTRS1973

Application of ERTS-1 imagery to the study of caribou movements and winter dispersal in relation to prevailing snowcover

The author has identified the following significant results. Step-wise discriminate analysis has demonstrated the feasibility of feature identification using linear discriminate functions of ERTS-1 MSS band densities and their ratios. The analysis indicated that features such as small streams can be detected even when they are in dark mountain shadow. The potential utility of this and similar analytic techniques appears considerable, and the limits it can be applied to analysis of ERTS-1 imagery are not yet fully known.

Lent, P. C.↗
NASA NTRS1972

Inversion layer solar cell fabrication and evaluation

Silicon solar cells with induced junctions were created by forming an inversion layer near the surface of the silicon by supplying a sheet of positive charge above the surface. This charged layer was supplied through three mechanisms: (1) supplying a positive potential to a transparent electrode separated from the silicon surface by a dielectric, (2) contaminating the oxide layer with positive ions, and (3) forming donor surface states that leave a positive charge on the surface. A movable semi-infinite shadow delineated the extent of sensitivity of the cell due to the inversion region. Measurements of the inversion layer cell response to light of different wavelengths indicated it to be more sensitive to the shorter wavelengths of the sun's spectrum than conventional cells. Theory of the conductance of the inversion layer vs. strength of the inversion layer was compared with experiment and found to match. Theoretical determinations of junction depth and inversion layer strength were made as a function of the surface potential for the transparent electrode cell.

Call, R. L.↗
NASA NTRS1973

The radiation from apertures in curved surfaces

The geometrical theory of diffraction is extended to treat the radiation from apertures or slots in convex, perfectly-conducting surfaces. It is assumed that the tangential electric field in the aperture is known so that an equivalent, infinitesimal source can be defined at each point in the aperture. Surface rays emanate from this source which is a caustic of the ray system. A launching coefficient is introduced to describe the excitation of the surface ray modes. If the field radiated from the surface is desired, the ordinary diffraction coefficients are used to determine the field of the rays shed tangentially from the surface rays. The field of the surface ray modes is not the field on the surface; hence if the mutual coupling between slots is of interest, a second coefficient related to the launching coefficient must be employed. In the region adjacent to the shadow boundary, the component of the field directly radiated from the source is presented by Fock-type functions. In the illuminated region the incident radiation from the source (this does not include the diffracted field components) is treated by geometrical optics. This extension of the geometrical theory of diffraction is applied to calculate the radiation from slots on elliptic cylinders, spheres and spheroids.

Pathak, P. H.↗
NASA NTRS1973

Investigations using data from Earth Resources Technology Satellite in the fields of agriculture/geography. Timber inventory (land use) in the Province of Huelva, Spain

A test site was chosen for the purpose of elaborating the patterns for the future total use of the satellite photographs. The election of the test site was made with the following criteria in mind: (1) a flat terrain for eliminating the dangers of shadows produced by a difficult topography; and (2) searching of well defined natural limits for the test site. Due to the lack of satellite photographs from the study area, a number of photos from the northern area of Spain have been studied from the point of view of obtaining answers from the spectra of the vegetation masses.

Debenito, E.↗
NASA NTRS1973

Preparation of urban land use inventories by machine processing of ERTS MSS data

Spectral classes of urban phenomena identified from Earth Resources Technology Satellite (ERTS) multispectral scanner data in Milwaukee included suburban inner city, industry, grassy (open area), road, wooded suburb, water cloud, and shadow. The Milwaukee spectral class statistics were used to classify the Chicago area, within the same ERTS frame, and similar results were achieved. In another ERTS frame, Marion County (Indianapolis) data were classified into similar classes. The Marion County ERTS study was supported by a land use classification of an area near downtown Indianapolis that utilized 12-band MSS data collected by aircraft from 3000 feet. The results of the ERTS analyses suggest that satellite data will be a useful tool for the urban planner for monitoring urban land use.

Todd, W.↗
NASA NTRS1973

Investigation of the detection and monitoring of forest insect infestations in the Sierra Nevada Mountains of California

The author has identified the following significant results. It is possible to detect all major areas of lodgepole pine defoliated by the needle miner within a given target area. Ground checking and helicopter observations have confirmed that accurate designations have been obtained for the following areas: (1) timbered v.s. non-timbered areas, (2) damaged v.s. undamaged timber areas, (3) lakes, (4) dome shadows which resemble lakes, (5) mountain meadows, (6) pasture land, (7) agricultural land, (8) desert, and (9) riparian vegetation.

Hall, R. C.↗
NASA NTRS1973

The influence of image position on urban place detection

The author has identified the following significant results. The ability of ERTS-1 MSS imagery to detect small urban places appears to vary with the position of the place in the image, as well as from band to band. Urban places of smallest size (approximately 2000 population) seem more detectable in the westernmost 3.5 degree scan segment. A relationship may exist between shadowing of vertical features and detectability.

Haralick, R. M.↗