SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of auxiliary electric power generation system for hydrogen-oxygen spacecraft - redesign of oxygen injector and first stage cylinder head
High-current, low-voltage silicon switching transistor redesigned for obtaining lowest possible saturation drop
Swept wing fighter aircraft drag coefficient reduction by configuration redesign
In the early development of jet engines, it was occasionally found that excessive amounts of coke or other carbonaceous deposits were formed in the combustion chamber. Sometimes a considerable amount of smoke was noted in the-exhaust gases. Excessive coke deposits may adversely affect jet-engine performance in several ways. The formation of excessive amounts of coke on or just downstream of a fuel nozzle (figs. 116(a) and (b)) changes the fuel-spray pattern and possibly affects combustor life and performance. Similar effects on performance can result from the deposition of coke on primary-air entry ports (fig. 116(c)). Sea-level or altitude starting may be impaired by the deposition of coke on spark-plug electrodes (fig. 116(b)), deposits either grounding the electrodes completely or causing the spark to occur at positions other than the intended gap. For some time it was thought that large deposits of coke in turbojet combustion chambers (fig. 116(a)) might break away and damage turbine blades; however, experience has indicated that for metal blades this problem is insignificant. (Cermet turbine blades may be damaged by loose coke deposits.) Finally, the deposition of coke may cause high-temperature areas, which promote liner warping and cracking (fig. 116(d)) from excessive temperature gradients and variations in thermal-expansion rates. Smoke in the exhaust gases does not generally impair engine performance but may be undesirable from a tactical or a nuisance standpoint. Appendix B of reference 1 and references 2 to 4 present data obtained from full-scale engines operated on test stands and from flight tests that indicate some effects on performance caused by coke deposits and smoke. Some information about the mechanism of coke formation is given in reference 5 and chapter IX. The data indicate that (1) high-boiling fuel residuals and partly polymerized products may be mixed with a large amount of smoke formed in the gas phase to account for the consistency, structure, and chemical composition of the soft coke in the dome and (2) the hard deposits on the liner are similar to petroleum coke and may result from the liquid-phase thermal cracking of the fuel. During the early development period of jet engines, it was noted that the excessive coke deposits and exhaust smoke were generally obtained when fuel-oil-type fuels were used. Engines using gasoline-type fuels were relatively free from the deposits and smoke. These results indicated that some type of quality control would be needed in fuel specifications. Also noted was the effect of engine operating conditions on coke deposition. It is possible that, even with a clean-burning fuel, an excessive amount of coke could be formed at some operating conditions. In this case, combustor redesign could possibly reduce the coke to a tolerable level. This chapter is a summary of the various coke-deposition and exhaust-smoke problems connected- with the turbojet combustor. Included are (1) the effect of coke deposition on combustor life or durability and performance; (2) the effect of combustor design, operating conditions, inlet variables, and fuel characteristics on coke deposition; (3) elimination of coke deposits; (4) the effect of operating conditions and fuel characteristics on formation of exhaust smoke; and (5) various bench test methods proposed for determining and controlling fuel quality.
Model reference adaptive control system redesign by Liapunov second method for linear systems
Reexamination of jet engine, heat pipes, thermionic diode, Rankine cycle space power systems, discussing redesign possibilities
Redesigned Stark cell with increased capability for producing electric field intensities in hydrogen molecule
Redesigned second-generation, tape-oriented computer system updates a data record, increases the capability to perform update runs, and produces a sequential report for every update run.
Sample system analysis, MF requirements, redesign, and packaging design
Effects of landing site redesignation on visibility during manned lunar landing
Biomedical instrumentation evaluation procedure to minimize redesigns and delays and to bridge communication gap between medical and engineering fields
Landing point redesignation during Apollo lunar module descent terminal portion, defining information and control system
Redesigned vacuum-probe surface sampler, consisting of wand with disposable probe and filter assembly, collects specimens of fallout and handling contamination.
Results are reported of an Investigation to determine the capability of pressure suited personnel to deploy lunar shelter/airlock structures install mockup life support, power and miscellaneous equipment within and outside the shelter, and adequately utilize this equipment after installation. Information was obtained on: (1) dimensional requirements for lunar shelter interiors, hatches, and airlocks, (2) limitations imposed on lunar shelter design by pressure suited crewmen, (3) times associated with various work tasks, and (4) redesign recommendations for a lunar stay time extension module (STEM).
A technical compilation on the types, applications and modifications to certain valves is presented. Data cover the following: (1) valves that feature automatic response to stimuli (thermal, electrical, fluid pressure, etc.), (2) modified valves changed by redesign of components to increase initial design effectiveness or give the item versatility beyond its basic design capability, and (3) special purpose valves with limited application as presented, but lending themselves to other uses with minor changes.
The pump used for reactor cooling in the SNAP 8 space power system was subjected to the expected vehicle launch vibration, and shock loading in accordance with the SNAP 8 environmental specification. Subsequent disassembly revealed damage to the thrust bearing pins, which should be redesigned and strengthened. The unit was operational, however, when run in a test loop after reassembly.
The design, operation, and flight test are presented for an inertial waste separation system. Training personnel to use this system under simulated conditions is also discussed. Conclusions indicate that before the system is usable in zero gravity environments, a mirror for the user's guidance should be installed, the bounce cycle and bag changing system should be redesigned, and flange clips should be added to improve the user's balance.
The Apollo guidance and navigation (G&N) equipment test program, the redesign philosophy, and the actual equipment modifications that were used to limit burn rates in an environment of 100 percent oxygen at pressures of 6.2 and 16 psia are described. The major approach was a serious basic review of the real function of the nonmetallic materials of concern. The result of this review was that the materials could be replaced, eliminated, or covered by nonflammable metallic materials. Although several low-flammability nonmetallic materials were investigated, the direct approach of cover, eliminate, or replace generally proved to be quicker and more effective.