Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “recent availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Development of an Interoperable GNSS Space Service Volume

Global Navigation Satellite Systems (GNSS), now routinely used for navigation by spacecraft in low Earth orbit, are being used increasingly by high-altitude users in geostationary orbit and high eccentric orbits as well, near to and above the GNSS constellations themselves. Available signals in these regimes are very limited for any single GNSS constellation due to the weak signal strength, the blockage of signals by the Earth, and the limited number of satellites. But with the recent development of multiple GNSS constellations and ongoing upgrades to existing constellations, multi-GNSS signal availability is set to improve significantly. This will only be achieved if these signals are designed to be interoperable and are clearly documented and supported.All satellite navigation constellation providers are working together through the United Nations International Committee on GNSS (ICG) to establish an interoperable multi-GNSS Space Service Volume (SSV) for the benefit of all GNSS space users. The multi-GNSS SSV represents a common set of baseline definitions and assumptions for high-altitude service in space, documents the service provided by each constellation, and provides a framework for continued support for space users. This paper provides an overview of the GNSS SSV concept, development, status, and achievements within the ICG. It describes the final adopted definition and performance characteristics of the GNSS SSV, as well as the numerous benefits and use cases enabled by this development. Extensive technical analysis was also performed to illustrate these benefits in terms of signal availability, both on a global scale, and for multiple distinct mission types. This analysis is summarized here and presented in detail in a companion paper by Enderle, et al.

Positioning↗
NASA NTRS2018

Development of an Interoperable GNSS Space Service Volume

Global Navigation Satellite Systems (GNSS), now routinely used for navigation by spacecraft in low Earth orbit, are being used increasingly by high-altitude users in geostationary orbit and high eccentric orbits as well, near to and above the GNSS constellations themselves. Available signals in these regimes are very limited for any single GNSS constellation due to the weak signal strength, the blockage of signals by the Earth, and the limited number of satellites. But with the recent development of multiple GNSS constellations and ongoing upgrades to existing constellations, multi-GNSS signal availability is set to improve significantly. This will only be achieved if these signals are designed to be interoperable and are clearly documented and supported. All satellite navigation constellation providers are working together through the United Nations International Committee on GNSS (ICG) to establish an interoperable multi-GNSS Space Service Volume (SSV) for the benefit of all GNSS space users. The multi-GNSS SSV represents a common set of baseline definitions and assumptions for high-altitude service in space, documents the service provided by each constellation, and provides a framework for continued support for space users. This paper provides an overview of the GNSS SSV concept, development, status, and achievements within the ICG. It describes the final adopted definition and performance characteristics of the GNSS SSV, as well as the numerous benefits and use cases enabled by this development. Extensive technical analysis was also performed to illustrate these benefits in terms of signal availability, both on a global scale, and for multiple distinct mission types. This analysis is summarized here and presented in detail in a companion paper by Enderle, et al.

Parker, Joel J. K.↗
NASA NTRS2018

The Multi-GNSS Space Service Volume

Global Navigation Satellite Systems (GNSS), now routinely used for navigation by spacecraft in low Earth orbit, are being used increasingly by high-altitude users in geostationary orbit and high eccentric orbits as well, near to and above the GNSS constellations themselves. Available signals in these regimes are very limited for any single GNSS constellation due to the weak signal strength, the blockage of signals by the Earth, and the limited number of satellites. But with the recent development of multiple GNSS constellations and ongoing upgrades to existing constellations, multi-GNSS signal availability is set to improve significantly. This will only be achieved if these signals are designed to be interoperable and are clearly documented and supported.All satellite navigation constellation providers are working together through the United Nations International Committee on GNSS (ICG) to establish an interoperable multi-GNSS Space Service Volume (SSV) for the benefit of all GNSS space users. The multi-GNSS SSV represents a common set of baseline definitions and assumptions for high-altitude service in space, documents the service provided by each constellation, and provides a framework for continued support for space users. This paper provides an overview of the GNSS SSV concept, development, status, and achievements within the ICG. It describes the final adopted definition and performance characteristics of the GNSS SSV, as well as the numerous benefits and use cases enabled by this development, and summarizes extensive technical analysis that was performed to illustrate these benefits in terms of signal availability, both on a global scale, and for multiple distinct mission types.

navigation↗
DOE OSTI2022

Speed of Sound Measurements of Binary Mixtures of Hydrofluorocarbons [Pentafluoroethane (R-125), 1,1-Difluoroethane (R-152a), or 1,1,1,2,3,3,3-Heptafluoropropane (R-227ea)] with Hydrofluoroolefins [2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E))]

In this article, speed of sound data measured using a dual-path pulse-echo instrument are reported for three binary refrigerant mixtures, R-125/1234yf, R-1234yf/152a, and R-1234ze(E)/227ea, at compositions of (0.33/0.67) and (0.67/0.33) mole fraction. The speed of sound was studied at temperatures ranging from 230 K to 345 K from pressures slightly above the bubble point curve up to 20 MPa for the mixtures containing R-1234yf and 49 MPa for the R-1234ze(E)/227ea mixtures. The relative combined expanded speed of sound uncertainty ranged from 0.039 % to 0.317 % with a mean uncertainty over all state points of less than 0.10 %. The reported data are compared to the most recent mixture models in REFPROP for each blend studied. Comparisons of available mixture models for the R-125/1234yf and R-1234yf/152a blends exhibit average absolute deviation values ranging from 0.10 % to 0.27 %, and the average absolute deviations for R-1234ze(E)/227ea blends range from 0.62 % to 0.94 %. The comparisons show that only minor adjustments are required to the R-125/1234yf and R-1234yf/152a mixture models to represent the speed of sound data within its uncertainty. However, significant adjustments are needed to improve the current mixture models for the R-1234ze(E)/227ea blend. Deficiencies with the R-1234ze(E)/227ea mixture model are not unexpected since it (1) utilizes a pure-fluid EOS R-1234ze(E) that has been shown to inaccurately represent R-1234ze(E) speed of sound values and (2) uses binary interaction parameters for the chemically similar mixture of R-1234yf/227ea.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tree-ring evidence marks year 2022 as the driest spring season in nearly four centuries in the Western Himalayas

The Hindukush-Karakoram-Himalayan region is a crucial freshwater source for billions across South Asia, yet its climate remains poorly understood due to limited long-term records. Winter and spring precipitation govern snow accumulation and downstream water availability in dry months particularly across the Western Himalayas (WH), but recent decades show intensifying droughts with unclear long-term context. Here, we have reconstructed a nearly four-century-long spring i.e. February to May (FMAM) precipitation for the Lahaul region of the (WH), an area dominated by the Western Disturbances. This record was developed using moisture-sensitive Cedrus deodara (Deodar) tree-rings from three high-elevation sites. A regional composite tree-ring-width chronology, developed through a Nested Principal Component Analysis and modeled with a nonlinear Generalized Additive Model (GAM) that explains 71 % of the variance during the calibration period. We identified the last two decades as the most precipitation deficit phase and the year 2022 showing the driest FMAM on record. The observed rise in the FMAM dry episodes post 1999 CE in our reconstruction, corresponds to the meteorological records. This recent drying is linked to a northward shift of the subtropical westerly jet and reduced moisture transport, both associated with unusual sea surface temperature patterns in the tropical Indian Ocean and the Western Pacific Ocean. Our results provide compelling evidence of long-term hydroclimatic instability in the WH and emphasize the value of tree-ring records in extending precipitation histories beyond the instrumental observations. Such reconstructions can be benchmarks to validate high-resolution climate models and formulate adaptation policies to mitigate future risks.

Cedrus deodara↗
DOE OSTI2021

Convergent close-coupling calculations of electrons scattering on electronically excited molecular hydrogen

We use the adiabatic-nuclei molecular convergent close-coupling method to perform calculations of 0.01–1000 eV electrons scattering on the c 3 Π u , a 3 $Σ$$^{+}_{g}$, B 1 $Σ$$^{+}_{u}$, C 1 Π u , and EF 1 $Σ$$^{+}_{g}$ states of H 2 in the v=0 vibrational level. Elastic, superelastic, ionization, and grand-total cross sections are presented, as well as cross sections for excitation of the n=2–3 singlet and triplet states of H 2 (where n is the atomic-limit principle quantum number). Comparison with available theoretical results is made. Good agreement is found with the recent R-matrix results [J. Phys. B 53, 245203 (2020)] for most of the exchange and dipole-forbidden transitions, but not for the dipole-allowed transitions. Here, the sources of disagreement were found to be an unconverged partial-wave expansion and the utilization of the fixed-nuclei approximation (as opposed to adiabatic-nuclei) in the R-matrix calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Face Recognition Oak Ridge (FaRO): A Framework for Distributed and Scalable Biometrics Applications

The facial biometrics community has seen a recent abundance of high-accuracy facial analytic models become freely available. Although these models' capabilities in facial detection, landmark detection, attribute analysis, and recognition are ever-increasing, they aren't always straightforward to deploy in a real-world environment. In reality, the use of the field's ever growing collection of models is becoming exceedingly difficult as library dependencies update and deprecate. Researchers often encounter headaches when attempting to utilize multiple models requiring different or conflicting software packages. Face Recognition Oak Ridge (FaRO) is an open-source project designed to provide a highly modular, flexible framework for unifying facial analytic models through a compartmentalized plug-and-play paradigm built on top of the gRPC (Google Remote Procedure Call) protocol. FaRO's server-client architecture and flexible portability allows easy construction of modularized and heterogeneous face analysis pipelines, distributed over many machines with differing hardware and software resources. This paper outlines FaRO's architecture and current capabilities, along with some experiments in model testing and distributed scaling through FaRO.

Bolme, David↗
DOE OSTI2021

Characterization of cellular oxidative stress response by stoichiometric redox proteomics

The thiol redox proteome refers to all proteins whose cysteine thiols are subjected to various redox-dependent posttranslational modifications (PTMs) including S-glutathionylation (SSG), S-nitrosylation (SNO), S-sulfenylation (SOH), and S-sulfhydration (SSH). These modifications can impact various aspects of protein function, including activity, binding, conformation, localization, and interactions with other molecules. It is highly desirable to have robust redox proteomics methods that can provide global, site-specific, and stoichiometric quantification of redox PTMs in order to elucidate the complex redox landscape and identify novel redox regulators in signaling and regulation. Mass spectrometry-based redox proteomics has emerged as the primary platform for enabling the broad characterization of thiol PTMs in cells and tissues. Herein we review recent advances in MS-based redox proteomics approaches for quantitative profiling of redox PTMs in cells and tissues at physiological or oxidative stress conditions and highlight some recent applications using these enabling techniques. Considering the relative maturity of available methods, a primary emphasis will be on two types of modifications: 1) total oxidation (i.e., all reversible thiol modifications), the level of which represents the overall redox state, and 2) S-glutathionylation, a major form of reversible thiol oxidation. We also discuss the significance of stoichiometric measurements of thiol PTMs as well as future perspectives towards a better understanding of cellular redox regulatory networks in cells and tissues.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A Case Study Investigating the Low Summertime CAPE Behavior in the Global Forecast System

Convective available potential energy (CAPE) is an important index for storm forecasting. Recent versions (v15.2 and v16) of the Global Forecast System (GFS) predict lower values of CAPE during summertime in the continental United States than analysis and observation. We conducted an evaluation of the GFS in simulating summertime CAPE using an example from the Unified Forecast System Case Study collection to investigate the factors that lead to the low CAPE bias in GFS. Specifically, we investigated the surface energy budget, soil properties, and near-surface and upper-level meteorological fields. Results show that the GFS simulates smaller surface latent heat flux and larger surface sensible heat flux than the observations. This can be attributed to the slightly drier-than-observed soil moisture in the GFS that comes from an offline global land data assimilation system. The lower simulated CAPE in GFS v16 is related to the early drop of surface net radiation with excessive boundary layer cloud after midday when compared with GFS v15.2. A moisture-budget analysis indicates that errors in the large-scale advection of water vapor does not contribute to the dry bias in the GFS at low levels. Common Community Physics Package single-column model (SCM) experiments suggest that with realistic initial vertical profiles, SCM simulations generate a larger CAPE than runs with GFS IC. SCM runs with an active LSM tend to produce smaller CAPE than that with prescribed surface fluxes. Note that the findings are only applicable to this case study. Including more warm-season cases would enhance the generalizability of our findings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The US effort towards a muon collider

A multi-TeV muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. There has been significant physics interest on Muon Colliders recently as indicated by the number of publications, relevant workshops, Snowmass activities but also the P5 report. This study describes a possible set of R&D and deliverables of the muon collider accelerator R&D program in the U.S. We describe high-priority studies to be performed in the first phase that will address critical questions for deciding the future plan for a muon collider design. The goal of these studies is to firm up choices for the most challenging components of a muon collider design, and to propose and begin testing and prototyping of components and systems that are needed to have confidence in and inform our specification choices. Key areas wherein the US can provide critical contributions to the newly formed international muon collider collaboration will be discussed as well.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

The Energy and Operational Impacts of Using 0-10V Control for LED Streetlights

Lighting systems have historically utilized either a proprietary control method, or one of a handful of standardized methods (e.g., 0-10V, DALI, DMX512) aimed at facilitating vendor interoperability. The utility and market success of the standardized methods has been limited for a variety of reasons. Although 0-10V is presently the most commonly available control interface for indoor and outdoor products in North America – even after the emergence of LED products and “connected lighting systems” with more modern network interfaces and luminaire-level sensors and intelligence – the use of 0-10V methods has significant tradeoffs. For instance, it is difficult to predict relative luminaire light output and input power at any particular control voltage, and performance across luminaires is inconsistent. This study characterizes 23 LED streetlights that claimed dimmability via a 0-10V interface, quantifies the performance variation found in market-available LED drivers, and explores the potential impact of the most recent 0-10V voluntary standard (ANSI C137.1-2022). Notably, the tested products were all manufactured prior to the release of this standard, and thus do not make compliance claims. Variation in response to 0-10V control voltages was expected to be more significant across different make/model luminaires than different units of the same make/model; the test population was structured based on this expectation. The 23 tested luminaires comprised 21 unique make/model streetlights from 14 different manufacturers. Three samples of one make/model streetlight were included in the test population to facilitate a limited exploration of unit-to-unit variation. The 21 unique make/model luminaires contained 20 unique make/model LED drivers from eight different driver manufacturers. Luminaire input power and current were measured at 11 control voltages (0.5 V and 1–10 V in 1 V increments).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Current Best Practices on Wildfire Risk Reduction for Electric Transmission and Distribution Systems

This report provides a set of best practices in response to Section 4(d) of Executive Order 14308, Empowering Commonsense Wildfire Prevention and Response. The information contained herein is expected to be used in conjunction with other materials at the Federal Energy Regulatory Commission Wildfire Risk Mitigation Technical Conference (Docket No. AD25-16-000), with possible direction to the North American Electric Reliability Corporation to take action. The objective of this report is to provide an overview of existing and emerging best practices currently employed or planned by utilities for wildfire mitigation, demonstrating how these efforts align with the executive order’s emphasis on reducing electric utility–caused wildfires while also balancing cost-effectiveness. Additionally, while most practices in utility-developed wildfire mitigation plans focus on risk reduction through robustness and operational reliability, this report also discusses best practices for resilience. The best practices are adopted from publicly available utility wildfire mitigation plans from the United States and Canada, recent findings from wildfire risk reduction research, and industry engagement.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Geographic coordinates of Populus Trichocarpa genets used in common gardens established and maintained by the Center for Bio energy Innovation. (CBI)

This data set contains the geographic coordinates of the GWAS population described in Tuskan et. al, 2011 and Evans, et. al, 2014. These genotypes have been used in numerous experiments since then, and have been propogated in common gardens. The most recent common garden geo referenced dataset for Davis, California is also available.

Populus Trichocarpa genets locations↗
DOE OSTI2024

Time Series Foundation Models and Deep Learning Architectures for Earthquake Temporal and Spatial Nowcasting

Advancing the capabilities of earthquake nowcasting, the real-time forecasting of seismic activities, remains crucial for reducing casualties. This multifaceted challenge has recently gained attention within the deep learning domain, facilitated by the availability of extensive earthquake datasets. Despite significant advancements, the existing literature on earthquake nowcasting lacks comprehensive evaluations of pre-trained foundation models and modern deep learning architectures; each focuses on a different aspect of data, such as spatial relationships, temporal patterns, and multi-scale dependencies. This paper addresses the mentioned gap by analyzing different architectures and introducing two innovative approaches called Multi Foundation Quake and GNNCoder. We formulate earthquake nowcasting as a time series forecasting problem for the next 14 days within 0.1-degree spatial bins in Southern California. Earthquake time series are generated using the logarithm energy released by quakes, spanning 1986 to 2024. Our comprehensive evaluations demonstrate that our introduced models outperform other custom architectures by effectively capturing temporal-spatial relationships inherent in seismic data. The performance of existing foundation models varies significantly based on the pre-training datasets, emphasizing the need for careful dataset selection. However, we introduce a novel method, Multi Foundation Quake, that achieves the best overall performance by combining a bespoke pattern with Foundation model results handled as auxiliary streams.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1972

A system of planetary masses and related quantities

After a short presentation of the methods used in the determinations of the masses of planets, the recent results for each planet are discussed and the best values available are presented. A similar discussion is given for the determination of the dynamical flattening of these planets, and, finally, a system of masses and mean densities of the planets is proposed.

Kovalevsky, J.↗
NASA NTRS1979

Hot-atom synthesis of organic compounds on Jupiter

Results of recent laboratory 'simulations' of photochemical processes on Jupiter are combined with available data on mixing rates and exposure times in the Jovian atmosphere to give quantitative predictions of the rate at which hot-atom reactions produce organic molecules. It is shown that abstraction reactions on methane by hot H atoms from solar UV photolysis of H2S will produce no more than 4 times 10 to the -17th power g/sq cm/sec for a steady-state mole fraction of total organics of approximately 10 to the -16th power. This is roughly 10 to the 7th power times less than the limit of detection of the most sensitive gas analysis experiments ever flown on a spacecraft. By far the most common organic molecule produced by this mechanism is CH3SH, methyl mercaptan, which is produced at a rate at least 600 times smaller than the rate of production of ethane by direct photolysis of CH4 at high altitudes.

Lewis, J. S.↗
NASA NTRS1979

The elemental and isotopic abundances of H, C, N, O in comets

The elemental abundances of light elements in comets is discussed by considering gas and dust separately. It is noted that the icy conglomerate model of the nucleus (Whipple, 1957) has been confirmed, and that the dust-to-gas mass ratio has been estimated within a factor of two for two recent comets. It is found that the total amount of oxygen available is also nominally in solar abundance; this implies that the oxygen of the solar nebula has probably been quantitatively bound in compounds that have been completely condensed and accreted in cometary nuclei. In addition, the amount of hydrogen is clearly depleted by a factor of 2,000, suggesting that the only hydrogen present is that linked in molecular compounds of H, C, N and O.

Delsemme, A. H.↗
NASA NTRS1980

Effect of blackbody radiation on the threshold for two-electron photodetachment of H/-/

The threshold law of the titled process, which is of the same form as that for electron-impact ionization of H, can experimentally be contaminated by simultaneous single photodetachment and Rydberg excitation of the residual atom, followed by ionization of the Rydberg atom by (room-temperature) blackbody photons. This gives a signal indistinguishable from direct double photodetachment. The correction is here calculated and shown to be finite at the double photodetachment threshold, and to have, possibly, an implication about the form of the threshold law itself. However, at room temperature its contribution is found to be small as it pertains to a recently initiated experiment at the Los Alamos Meson Physics Facility for available energies greater than a millivolt above threshold. The temperature dependence of the correction is shown to be large (k/B/T) to the 7/2; thus at higher temperatures the effect may be observable.

Temkin, A.↗