Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “protocol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Fiber optic control system integration

A total fiber optic, integrated propulsion/flight control system concept for advanced fighter aircraft is presented. Fiber optic technology pertaining to this system is identified and evaluated for application readiness. A fiber optic sensor vendor survey was completed, and the results are reported. The advantages of centralized/direct architecture are reviewed, and the concept of the protocol branch is explained. Preliminary protocol branch selections are made based on the F-18/F404 application. Concepts for new optical tools are described. Development plans for the optical technology and the described system are included.

Poppel, G. L.↗
NASA NTRS1988

Accelerated convergence for synchronous approximate agreement

The protocol for synchronous approximate agreement presented by Dolev et. al. exhibits the undesirable property that a faulty processor, by the dissemination of a value arbitrarily far removed from the values held by good processors, may delay the termination of the protocol by an arbitrary amount of time. Such behavior is clearly undesirable in a fault tolerant dynamic system subject to hard real-time constraints. A mechanism is presented by which editing data suspected of being from Byzantine-failed processors can lead to quicker, predictable, convergence to an agreement value. Under specific assumptions about the nature of values transmitted by failed processors relative to those transmitted by good processors, a Monte Carlo simulation is presented whose qualitative results illustrate the trade-off between accelerated convergence and the accuracy of the value agreed upon.

Kearns, J. P.↗
NASA NTRS1986

Operation of the HP2250 with the HP9000 series 200 using PASCAL 3.0

A computer program has been written to provide an interface between the HP Series 200 desktop computers, operating under HP Standard Pascal 3.0, and the HP2250 Data Acquisition and Control System. Pascal 3.0 for the HP9000 desktop computer gives a number of procedures for handling bus communication at various levels. It is necessary, however, to reach the lowest possible level in Pascal to handle the bus protocols required by the HP2250. This makes programming extremely complex since these protocols are not documented. The program described solves those problems and allows the user to immediately program, simply and efficiently, any measurement and control language (MCL/50) application with a few procedure calls. The complete set of procedures is available on a 5 1/4 inch diskette from Cosmic. Included in this group of procedures is an Exerciser which allows the user to exercise his HP2250 interactively. The exerciser operates in a fashion similar to the Series 200 operating system programs, but is adapted to the requirements of the HP2250. The programs on the diskette and the user's manual assume the user is acquainted with both the MCL/50 programming language and HP Standard Pascal 3.0 for the HP series 200 desktop computers.

Perry, John↗
NASA NTRS1989

Parity retransmission hybrid ARQ using rate 1/2 convolutional codes on a nonstationary channel

A parity retransmission hybrid automatic repeat request (ARQ) scheme is proposed which uses rate 1/2 convolutional codes and Viterbi decoding. A protocol is described which is capable of achieving higher throughputs than previously proposed parity retransmission schemes. The performance analysis is based on a two-state Markov model of a nonstationary channel. This model constitutes a first approximation to a nonstationary channel. The two-state channel model is used to analyze the throughput and undetected error probability of the protocol presented when the receiver has both an infinite and a finite buffer size. It is shown that the throughput improves as the channel becomes more bursty.

Lugand, Laurent R.↗
NASA NTRS1990

Fast causal multicast

A new protocol is presented that efficiently implements a reliable, causally ordered multicast primitive and is easily extended into a totally ordered one. Intended for use in the ISIS toolkit, it offers a way to bypass the most costly aspects of ISIS while benefiting from virtual synchrony. The facility scales with bounded overhead. Measured speedups of more than an order of magnitude were obtained when the protocol was implemented within ISIS. One conclusion is that systems such as ISIS can achieve performance competitive with the best existing multicast facilities - a finding contradicting the widespread concern that fault-tolerance may be unacceptably costly.

Birman, Kenneth P.↗
NASA NTRS1990

Fast casual multicast

A new protocol is presented that efficiently implements a reliable, causally ordered multicast primitive and is easily extended into a totally ordered one. Intended for use in the ISIS toolkit, it offers a way to bypass the most costly aspects of ISIS while benefiting from virtual synchrony. The facility scales with bounded overhead. Measured speedups of more than an order of magnitude were obtained when the protocol was implemented within ISIS. One conclusion is that systems such as ISIS can achieve performance competitive with the best existing multicast facilities--a finding contradicting the widespread concern that fault-tolerance may be unacceptably costly.

Birman, Kenneth↗
NASA NTRS1990

AIRNET: A real-time comunications network for aircraft

A real-time local area network was developed for use on aircraft and space vehicles. It uses token ring technology to provide high throughput, low latency, and high reliability. The system was implemented on PCs and PC/ATs operating on PCbus, and on Intel 8086/186/286/386s operating on Multibus. A standard IEEE 802.2 logical link control interface was provided to (optional) upper layer software; this permits the controls designer to utilize standard communications protocols (e.g., ISO, TCP/IP) if time permits, or to utilize a very fast link level protocol directly if speed is critical. Both unacknowledged datagram and reliable virtual circuit services are supported. A station operating an 8 MHz Intel 286 as a host can generate a sustained load of 1.8 megabits per second per station, and a 100-byte message can be delivered from the transmitter's user memory to the receiver's user memory, including all operating system and network overhead, in under 4 milliseconds.

Weaver, Alfred C.↗
NASA NTRS1989

A FD/DAMA network architecture for the first generation land mobile satellite services

A frequency division/demand assigned multiple access (FD/DAMA) network architecture for the first-generation land mobile satellite services is presented. Rationales and technical approaches are described. In this architecture, each mobile subscriber must follow a channel access protocol to make a service request to the network management center before transmission for either open-end or closed-end services. Open-end service requests will be processed on a blocked call cleared basis, while closed-end requests will be processed on a first-come-first-served basis. Two channel access protocols are investigated, namely, a recently proposed multiple channel collision resolution scheme which provides a significantly higher useful throughput, and the traditional slotted Aloha scheme. The number of channels allocated for either open-end or closed-end services can be adaptively changed according to aggregated traffic requests. Both theoretical and simulation results are presented. Theoretical results have been verified by simulation on the JPL network testbed.

Yan, T.-Y.↗
NASA NTRS1990

Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 1: Project summary

This volume (1 of 4) gives a summary of the original AMPS software system configuration, points out some of the problem areas in the original software design that this project is to address, and in the appendix collects all the bimonthly status reports. The purpose of AMPS is to provide a self reliant system to control the generation and distribution of power in the space station. The software in the AMPS breadboard can be divided into three levels: the operating environment software, the protocol software, and the station specific software. This project deals only with the operating environment software and the protocol software. The present station specific software will not change except as necessary to conform to new data formats.

Mckee, James W.↗
NASA NTRS1990

Highball: A high speed, reserved-access, wide area network

A network architecture called Highball and a preliminary design for a prototype, wide-area data network designed to operate at speeds of 1 Gbps and beyond are described. It is intended for applications requiring high speed burst transmissions where some latency between requesting a transmission and granting the request can be anticipated and tolerated. Examples include real-time video and disk-disk transfers, national filestore access, remote sensing, and similar applications. The network nodes include an intelligent crossbar switch, but have no buffering capabilities; thus, data must be queued at the end nodes. There are no restrictions on the network topology, link speeds, or end-end protocols. The end system, nodes, and links can operate at any speed up to the limits imposed by the physical facilities. An overview of an initial design approach is presented and is intended as a benchmark upon which a detailed design can be developed. It describes the network architecture and proposed access protocols, as well as functional descriptions of the hardware and software components that could be used in a prototype implementation. It concludes with a discussion of additional issues to be resolved in continuing stages of this project.

Mills, David L.↗
NASA NTRS1990

Issues in providing a reliable multicast facility

Issues involved in point-to-multipoint communication are presented and the literature for proposed solutions and approaches surveyed. Particular attention is focused on the ideas and implementations that align with the requirements of the environment of interest. The attributes of multicast receiver groups that might lead to useful classifications, what the functionality of a management scheme should be, and how the group management module can be implemented are examined. The services that multicasting facilities can offer are presented, followed by mechanisms within the communications protocol that implements these services. The metrics of interest when evaluating a reliable multicast facility are identified and applied to four transport layer protocols that incorporate reliable multicast.

Dempsey, Bert J.↗
NASA NTRS1990

Method and apparatus for positioning a robotic end effector

A robotic end effector and operation protocol for a reliable grasp of a target object irrespective of the target's contours is disclosed. A robotic hand includes a plurality of jointed fingers, one of which, like a thumb, is in opposed relation to the other. Each finger is comprised of at least two jointed sections, and provided with reflective proximity sensors, one on the inner surface of each finger section. Each proximity sensor comprises a transmitter of a beam of radiant energy and means for receiving reflections of the transmitted energy when reflected by a target object and for generating electrical signals responsive thereto. On the fingers opposed to the thumb, the proximity sensors on the outermost finger sections are aligned in an outer sensor array and the sensors on the intermediate finger sections and sensors on the innermost finger sections are similarly arranged to form an intermediate sensor array and an inner sensor array, respectively. The invention includes a computer system with software and/or circuitry for a protocol comprising the steps in sequence of: (1) approach axis alignment to maximize the number of outer layer sensors which detect the target; (2) non-contact contour following the target by the robot fingers to minimize target escape potential; and (3) closing to rigidize the target including dynamically re-adjusting the end effector finger alignment to compensate for target motion. A signal conditioning circuit and gain adjustment means are included to maintain the dynamic range of low power reflection signals.

Hess, Clifford W.↗
NASA NTRS1990

Documentation for the token ring network simulation system

A manual is presented which describes the language features of the Token Ring Network Simulation System. The simulation system is a powerful simulation tool for token ring networks which allows the specification of various Medium Access Control (MAC) layer protocols as well as the specification of various features of upper layer ISO protocols. In addition to these features, it also allows the user to specify message and station classes virtually to any degree of detail desired. The choice of a language instead of an interactive system to specify network parameters was dictated by both flexibility and time considerations. The language was developed specifically for the simulation system, and is very simple. It is also user friendly in that language elements which do not apply to the case at hand are ignored rather than treated as errors.

Peden, Jeffery H.↗
NASA NTRS1990

XTP for the NASA space station

The NASA Space Station is a truly international effort; therefore, its communications systems must conform to established international standards. Thus, NASA is requiring that each network-interface unit implement a full suite of ISO protocols. However, NASA is understandably concerned that a full ISO stack will not deliver performance consistent with the real-time demands of Space Station control systems. Therefore, as a research project, the suitability of the Xpress transfer protocol (XTP) is investigated along side a full ISO stack. The initial plans for implementing XTP and comparing its performance to ISO TP4 are described.

Weaver, Alfred C.↗
NASA NTRS1990

Evaluation plan for space station network interface units

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Weaver, Alfred C.↗
NASA NTRS1991

TCP Packet Trace Analysis

Examination of a trace of packets collected from the network is often the only method available for diagnosing protocol performance problems in computer networks. This thesis explores the use of packet traces to diagnose performance problems of the transport protocol TCP. Unfortunately, manual examination of these traces can be so tedious that effective analysis is not possible. The primary contribution of this thesis is a graphical method of displaying the packet trace which greatly reduce, the tediousness of examining a packet trace. The graphical method is demonstrated by the examination of some packet traces of typical TCP connections. The performance of two different implementations of TCP sending data across a particular network path is compared. Traces many thousands of packets long are used to demonstrate how effectively the graphical method simplifies examination of long complicated traces. In the comparison of the two TCP implementations, the burstiness of the TCP transmitter appeared to be related to the achieved throughput. A method of quantifying this burstiness is presented and its possible relevance to understanding the performance of TCP is discussed.

Shepard, Timothy J.↗
NASA NTRS1991

NASA/SPAN and DOE/ESnet-DECnet transition strategy for DECnet OSI/phase 5

The technical issues are examined involved with the transition of very large DECnet networks from DECnet phase IV protocols to DECnet OSI/Phase V protocols. The networks involved are the NASA's Science Internet (NSI-DECnet) and the DOE's Energy Science network (ESnet-DECnet). These networks, along with the many universities and research institutions connected to them, combine to form a single DECnet network containing more than 20,000 transitions and crossing numerous organizational boundaries. Discussion of transition planning, including decisions about Phase V naming, addressing, and routing are presented. Also discussed are transition issues related to the use of non-DEC routers in the network.

Porter, Linda↗
NASA NTRS1991

NSI customer service representatives and user support office: NASA Science Internet

The NASA Science Internet, (NSI) was established in 1987 to provide NASA's Offices of Space Science and Applications (OSSA) missions with transparent wide-area data connectivity to NASA's researchers, computational resources, and databases. The NSI Office at NASA/Ames Research Center has the lead responsibility for implementing a total, open networking program to serve the OSSA community. NSI is a full-service communications provider whose services include science network planning, network engineering, applications development, network operations, and network information center/user support services. NSI's mission is to provide reliable high-speed communications to the NASA science community. To this end, the NSI Office manages and operates the NASA Science Internet, a multiprotocol network currently supporting both DECnet and TCP/IP protocols. NSI utilizes state-of-the-art network technology to meet its customers' requirements. THe NASA Science Internet interconnects with other national networks including the National Science Foundation's NSFNET, the Department of Energy's ESnet, and the Department of Defense's MILNET. NSI also has international connections to Japan, Australia, New Zealand, Chile, and several European countries. NSI cooperates with other government agencies as well as academic and commercial organizations to implement networking technologies which foster interoperability, improve reliability and performance, increase security and control, and expedite migration to the OSI protocols.

Source record↗