Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

A METHOD FOR MEASURING (SLOPES OF) THE MASS PROFILES OF DWARF SPHEROIDAL GALAXIES

We introduce a method for measuring the slopes of mass profiles within dwarf spheroidal (dSph) galaxies directly from stellar spectroscopic data and without adopting a dark matter halo model. Our method combines two recent results: (1) spherically symmetric, equilibrium Jeans models imply that the product of half-light radius and (squared) stellar velocity dispersion provides an estimate of the mass enclosed within the half-light radius of a dSph stellar component, and (2) some dSphs have chemodynamically distinct stellar subcomponents that independently trace the same gravitational potential. We devise a statistical method that uses measurements of stellar positions, velocities, and spectral indices to distinguish two dSph stellar subcomponents and to estimate their individual half-light radii and velocity dispersions. For a dSph with two detected stellar subcomponents, we obtain estimates of masses enclosed at two discrete points in the same mass profile, immediately defining a slope. Applied to published spectroscopic data, our method distinguishes stellar subcomponents in the Fornax and Sculptor dSphs, for which we measure slopes {Gamma} {identical_to} {Delta}log M/{Delta}log r = 2.61{sup +0.43}{sub -0.37} and {Gamma} = 2.95{sup +0.51}{sub -0.39}, respectively. These values are consistent with 'cores' of constant density within the central few hundred parsecs of each galaxy and rule out 'cuspy' Navarro-Frenk-White (NFW) profiles (dlog M/dlog r {<=} 2 at all radii) with a significance {approx}> 96% and {approx}> 99%, respectively. Tests with synthetic data indicate that our method tends systematically to overestimate the mass of the inner stellar subcomponent to a greater degree than that of the outer stellar subcomponent, and therefore to underestimate the slope {Gamma} (implying that the stated NFW exclusion levels are conservative).

79 ASTRONOMY AND ASTROPHYSICS↗

STRONG FIELD EFFECTS ON EMISSION LINE PROFILES: KERR BLACK HOLES AND WARPED ACCRETION DISKS

If an accretion disk around a black hole is illuminated by hard X-rays from non-thermal coronae, fluorescent iron lines will be emitted from the inner region of the accretion disk. The emission line profiles will show a variety of strong field effects, which may be used as a probe of the spin parameter of the black hole and the structure of the accretion disk. In this paper, we generalize the previous relativistic line profile models by including both the black hole spinning effects and the non-axisymmetries of warped accretion disks. Our results show different features from the conventional calculations for either a flat disk around a Kerr black hole or a warped disk around a Schwarzschild black hole by presenting, at the same time, multiple peaks, rather long red tails, and time variations of line profiles with the precession of the disk. We show disk images as seen by a distant observer, which are distorted by the strong gravity. Although we are primarily concerned with the iron K-shell lines in this paper, the calculation is general and is valid for any emission lines produced from a warped accretion disk around a black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

SIZES AND SURFACE BRIGHTNESS PROFILES OF QUIESCENT GALAXIES AT z {approx} 2

We use deep Hubble Space Telescope Wide Field Camera 3 near-infrared imaging obtained of the GOODS-South field as part of the CANDELS survey to investigate a stellar mass-limited sample of quiescent galaxies at 1.5 < z < 2.5. We measure surface brightness profiles for these galaxies using a method that properly measures low surface brightness flux at large radii. We find that quiescent galaxies at z {approx} 2 very closely follow Sersic profiles, with n{sub median} = 3.7, and have no excess flux at large radii. Their effective radii are a factor of {approx}4 smaller than those of low-redshift quiescent galaxies of similar mass. However, there is a significant spread in sizes ({sigma}{sub log{sub 1{sub 0r{sub e}}}}= 0.24), with the largest z {approx} 2 galaxies lying close to the z = 0 mass-size relation. We compare the stellar mass surface density profiles with those of massive elliptical galaxies in the Virgo Cluster and confirm that most of the mass growth which occurs between z {approx} 2 and z = 0 must be due to accretion of material onto the outer regions of the galaxies. Additionally, we investigate the evolution in the size distribution of massive quiescent galaxies. We find that the minimum size growth required for z {approx} 2 quiescent galaxies to fall within the z = 0 size distribution is a factor of {approx}2 smaller than the total median size growth between z {approx} 2 and z = 0.

79 ASTRONOMY AND ASTROPHYSICS↗

PROFILES OF Ly{alpha} EMISSION LINES OF THE EMITTERS AT z = 3.1

We present the results of the observations of the Ly{alpha} line profiles of 91 emission-line galaxies at z = 3.1 with a spectral resolution of {lambda}/{delta}{lambda}(FWHM) Almost-Equal-To 1700 or 180 km s{sup -1}. A significant fraction of {approx}50% of the observed objects show the characteristic double peaks in their Ly{alpha} profile. The red peak is much stronger than the blue one for most of the cases. The red peaks themselves also show weak but significant asymmetry and their widths are correlated with the velocity separation of the red and the blue peaks. This implies that the peaks are not isolated multiple components with different velocities but parts of a single line that are modified by the absorption and/or scattering by the associated neutral hydrogen gas. The characteristic profile can be naturally explained by scattering in the expanding shell of the neutral hydrogen surrounding the Ly{alpha} emitting region while the attenuation by the intergalactic medium should also be considered. Our results suggest that the star formation in these Ly{alpha} emitters are dominated by young burst-like events that produce the intrinsic Ly{alpha} emission as well as the gas outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

CLASH: PRECISE NEW CONSTRAINTS ON THE MASS PROFILE OF THE GALAXY CLUSTER A2261

We precisely constrain the inner mass profile of A2261 (z = 0.225) for the first time and determine that this cluster is not 'overconcentrated' as found previously, implying a formation time in agreement with {Lambda}CDM expectations. These results are based on multiple strong-lensing analyses of new 16-band Hubble Space Telescope imaging obtained as part of the Cluster Lensing and Supernova survey with Hubble. Combining this with revised weak-lensing analyses of Subaru wide-field imaging with five-band Subaru + KPNO photometry, we place tight new constraints on the halo virial mass M{sub vir} = (2.2 {+-} 0.2) Multiplication-Sign 10{sup 15} M{sub Sun} h {sup -1}{sub 70} (within r{sub vir} Almost-Equal-To 3 Mpc h {sup -1}{sub 70}) and concentration c{sub vir} = 6.2 {+-} 0.3 when assuming a spherical halo. This agrees broadly with average c(M, z) predictions from recent {Lambda}CDM simulations, which span 5 {approx}< (c) {approx}< 8. Our most significant systematic uncertainty is halo elongation along the line of sight (LOS). To estimate this, we also derive a mass profile based on archival Chandra X-ray observations and find it to be {approx}35% lower than our lensing-derived profile at r{sub 2500} {approx} 600 kpc. Agreement can be achieved by a halo elongated with a {approx}2:1 axis ratio along our LOS. For this elongated halo model, we find M{sub vir} = (1.7 {+-} 0.2) Multiplication-Sign 10{sup 15} M{sub Sun} h {sup -1}{sub 70} and c{sub vir} = 4.6 {+-} 0.2, placing rough lower limits on these values. The need for halo elongation can be partially obviated by non-thermal pressure support and, perhaps entirely, by systematic errors in the X-ray mass measurements. We estimate the effect of background structures based on MMT/Hectospec spectroscopic redshifts and find that these tend to lower M{sub vir} further by {approx}7% and increase c{sub vir} by {approx}5%.

79 ASTRONOMY AND ASTROPHYSICS↗

MODEL-FREE MULTI-PROBE LENSING RECONSTRUCTION OF CLUSTER MASS PROFILES

Lens magnification by galaxy clusters induces characteristic spatial variations in the number counts of background sources, amplifying their observed fluxes and expanding the area of sky, the net effect of which, known as magnification bias, depends on the intrinsic faint-end slope of the source luminosity function. The bias is strongly negative for red galaxies, dominated by the geometric area distortion, whereas it is mildly positive for blue galaxies, enhancing the blue counts toward the cluster center. We generalize the Bayesian approach of Umetsu et al. for reconstructing projected cluster mass profiles, by incorporating multiple populations of background sources for magnification-bias measurements and combining them with complementary lens-distortion measurements, effectively breaking the mass-sheet degeneracy and improving the statistical precision of cluster mass measurements. The approach can be further extended to include strong-lensing projected mass estimates, thus allowing for non-parametric absolute mass determinations in both the weak and strong regimes. We apply this method to our recent CLASH lensing measurements of MACS J1206.2-0847, and demonstrate how combining multi-probe lensing constraints can improve the reconstruction of cluster mass profiles. This method will also be useful for a stacked lensing analysis, combining all lensing-related effects in the cluster regime, for a definitive determination of the averaged mass profile.

79 ASTRONOMY AND ASTROPHYSICS↗

The velocity dispersion profile of NGC 6388 from resolved-star spectroscopy: No evidence of a central cusp and new constraints on the black hole mass

By combining high spatial resolution and wide-field spectroscopy performed, respectively, with SINFONI and FLAMES at the ESO/VLT we measured the radial velocities of more than 600 stars in the direction of NGC 6388, a Galactic globular cluster which is suspected to host an intermediate-mass black hole. Approximately 55% of the observed targets turned out to be cluster members. The cluster velocity dispersion has been derived from the radial velocity of individual stars: 52 measurements in the innermost 2'', and 276 stars located between 18'' and 600''. The velocity dispersion profile shows a central value of ∼13 km s{sup –1}, a flat behavior out to ∼60'' and a decreasing trend outward. The comparison with spherical and isotropic models shows that the observed density and velocity dispersion profiles are inconsistent with the presence of a central black hole more massive than ∼2000 M {sub ☉}. These findings are at odds with recent results obtained from integrated light spectra, showing a velocity dispersion profile with a steep central cusp of 23-25 km s{sup –1} at r < 2'' and suggesting the presence of a black hole with a mass of ∼1.7 × 10{sup 4} M {sub ☉}. We also found some evidence of systemic rotation with amplitude A {sub rot} ∼ 8 km s{sup –1} in the innermost 2'' (0.13 pc), decreasing to A {sub rot} = 3.2 km s{sup –1} at 18'' < r < 160''.

79 ASTRONOMY AND ASTROPHYSICS↗

Realistic modeling of the pulse profile of PSR J0737-3039A

The Double Pulsar, PSR J0737-3039A/B, is a unique system in which both neutron stars have been detected as radio pulsars. As shown in Ferdman et al., there is no evidence for pulse profile evolution of the A pulsar, and the geometry of the pulsar was fit well with a double-pole circular radio beam model. Assuming a more realistic polar cap model with a vacuum retarded dipole magnetosphere configuration including special relativistic effects, we create synthesized pulse profiles for A given the best-fit geometry from the simple circular beam model. By fitting synthesized pulse profiles to those observed from pulsar A, we constrain the geometry of the radio beam, namely the half-opening angle and the emission altitude, to be ∼30° and ∼10 neutron star radii, respectively. Combining the observational constraints of PSR J0737-3039A/B, we are able to construct the full three-dimensional orbital geometry of the Double Pulsar. The relative angle between the spin axes of the two pulsars (Δ{sub S}) is estimated to be ∼(138° ± 5°) at the current epoch and will likely remain constant until tidal interactions become important in ∼85 Myr, at merger.

79 ASTRONOMY AND ASTROPHYSICS↗

The Hα profiles of Be shell stars

A new set of theoretical Hα emission line profiles of Be stars has been computed using the code BERAY, which solves the transfer equation along a series of rays passing through the star+disk system, representing an improved treatment over earlier work done by the authors. The new profiles were compared with the previous work, and general trends (such as line profile shapes and correlations between line equivalent widths as a function of initial density ρ{sub 0} and power law index n) were recovered. Additionally, BERAY was employed to model the spectra of eight well-known Be shell stars. Some degeneracy was found in the choice of model parameters, highlighting the need to employ alternate observables to constrain the models. However, the inclination angle of the model seemed relatively insensitive to the choices of other parameters, and we show that, with our models, only a very small range of inclination angles can adequately reproduce the observations. Five of our eight targets were found to have inclination angles of 70° or higher, and two more were found to have inclination angles of 67° and 65°. The observation of one target—4 Aquilae—could only be reproduced by models created at an inclination angle of approximately 45°.

79 ASTRONOMY AND ASTROPHYSICS↗

Global properties of M31's stellar halo from the splash survey. II. Metallicity profile

We present the metallicity distribution of red giant branch (RGB) stars in M31's stellar halo, derived from photometric metallicity estimates for over 1500 spectroscopically confirmed RGB halo stars. The stellar sample comes from 38 halo fields observed with the Keck/DEIMOS spectrograph, ranging from 9 to 175 kpc in projected distance from M31's center, and includes 52 confirmed M31 halo stars beyond 100 kpc. While a wide range of metallicities is seen throughout the halo, the metal-rich peak of the metallicity distribution function becomes significantly less prominent with increasing radius. The metallicity profile of M31's stellar halo shows a continuous gradient from 9 to ∼100 kpc, with a magnitude of ∼ – 0.01 dex kpc{sup –1}. The stellar velocity distributions in each field are used to identify stars that are likely associated with tidal debris features. The removal of tidal debris features does not significantly alter the metallicity gradient in M31's halo: a gradient is maintained in fields spanning 10-90 kpc. We analyze the halo metallicity profile, as well as the relative metallicities of stars associated with tidal debris features and the underlying halo population, in the context of current simulations of stellar halo formation. We argue that the large-scale gradient in M31's halo implies M31 accreted at least one relatively massive progenitor in the past, while the field to field variation seen in the metallicity profile indicates that multiple smaller progenitors are likely to have contributed substantially to M31's outer halo.

79 ASTRONOMY AND ASTROPHYSICS↗

SMOOTHING ROTATION CURVES AND MASS PROFILES

We show that spiral activity can erase pronounced features in disk galaxy rotation curves. We present simulations of growing disks, in which the added material has a physically motivated distribution, as well as other examples of physically less realistic accretion. In all cases, attempts to create unrealistic rotation curves were unsuccessful because spiral activity rapidly smoothed away features in the disk mass profile. The added material was redistributed radially by the spiral activity, which was itself provoked by the density feature. In the case of a ridge-like feature in the surface density profile, we show that two unstable spiral modes develop, and the associated angular momentum changes in horseshoe orbits remove particles from the ridge and spread them both inward and outward. This process rapidly erases the density feature from the disk. We also find that the lack of a feature when transitioning from disk to halo dominance in the rotation curves of disk galaxies, the so called ''disk-halo conspiracy'', could also be accounted for by this mechanism. We do not create perfectly exponential mass profiles in the disk, but suggest that this mechanism contributes to their creation.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING MULTI-WAVELENGTH PULSE PROFILES OF THE MILLISECOND PULSAR PSR B1821–24

PSR B1821–24 is a solitary millisecond pulsar that radiates multi-wavelength pulsed photons. It has complex radio, X-ray, and γ-ray pulse profiles with distinct peak phase separations that challenge the traditional caustic emission models. Using the single-pole annular gap model with a suitable magnetic inclination angle (α = 40°) and viewing angle (ζ = 75°), we managed to reproduce its pulse profiles of three wavebands. It is found that the middle radio peak originated from the core gap region at high altitudes, and the other two radio peaks originated from the annular gap region at relatively low altitudes. Two peaks of both X-ray and γ-ray wavebands basically originated from the annular gap region, while the γ-ray emission generated from the core gap region contributes somewhat to the first γ-ray peak. Precisely reproducing the multi-wavelength pulse profiles of PSR B1821–24 enables us to understand emission regions of distinct wavebands and justify pulsar emission models.

79 ASTRONOMY AND ASTROPHYSICS↗

MASS ACCRETION AND ITS EFFECTS ON THE SELF-SIMILARITY OF GAS PROFILES IN THE OUTSKIRTS OF GALAXY CLUSTERS

Galaxy clusters exhibit remarkable self-similar behavior which allows us to establish simple scaling relationships between observable quantities and cluster masses, making galaxy clusters useful cosmological probes. Recent X-ray observations suggested that self-similarity may be broken in the outskirts of galaxy clusters. In this work, we analyze a mass-limited sample of massive galaxy clusters from the Omega500 cosmological hydrodynamic simulation to investigate the self-similarity of the diffuse X-ray emitting intracluster medium (ICM) in the outskirts of galaxy clusters. We find that the self-similarity of the outer ICM profiles is better preserved if they are normalized with respect to the mean density of the universe, while the inner profiles are more self-similar when normalized using the critical density. However, the outer ICM profiles as well as the location of accretion shock around clusters are sensitive to their mass accretion rate, which causes the apparent breaking of self-similarity in cluster outskirts. We also find that the collisional gas does not follow the distribution of collisionless dark matter (DM) perfectly in the infall regions of galaxy clusters, leading to 10% departures in the gas-to-DM density ratio from the cosmic mean value. Our results have a number implications for interpreting observations of galaxy clusters in X-ray and through the Sunyaev–Zel’dovich effect, and their applications to cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

The relationships between edge localized modes suppression, pedestal profiles and lithium wall coatings in NSTX

Recently in the National Spherical Torus Experiment (NSTX), increasing lithium wall coatings suppressed edge localized modes (ELMs), gradually but not quite monotonically. This work details profile and stability analysis as ELMs disappeared throughout the lithium scan. While the quantity of lithium deposited between discharges did not uniquely determine the presence of ELMs, profile analysis demonstrated that lithium was correlated with wider density and pressure pedestals with peak gradients farther from the separatrix. Moreover, the ELMy and ELM-free discharges were cleanly separated by their density and pedestal widths and peak gradient locations. Ultimately, ELMs were only suppressed when lithium caused the density pedestal to widen and shift inward. These changes in the density gradient were directly reflected in the pressure gradient and calculated bootstrap current. This supports the theory that ELMs in NSTX are caused by peeling and/or ballooning modes, as kink/peeling modes are stabilized when the edge current and pressure gradient shift away from the separatrix. Edge stability analysis using ELITE corroborated this picture, as reconstructed equilibria from ELM-free discharges were generally farther from their kink/peeling stability boundaries than ELMy discharges. We conclude that density profile control provided by lithium is the key first step to ELM suppression in NSTX.

BALLOONING MODES↗

Surface Profile and Stress Field Evaluation using Digital Gradient Sensing Method

Shape and surface topography evaluation from measured orthogonal slope/gradient data is of considerable engineering significance since many full-field optical sensors and interferometers readily output accurate data of that kind. This has applications ranging from metrology of optical and electronic elements (lenses, silicon wafers, thin film coatings), surface profile estimation, wave front and shape reconstruction, to name a few. In this context, a new methodology for surface profile and stress field determination based on a recently introduced non-contact, full-field optical method called digital gradient sensing (DGS) capable of measuring small angular deflections of light rays coupled with a robust finite-difference-based least-squares integration (HFLI) scheme in the Southwell configuration is advanced here. The method is demonstrated by evaluating (a) surface profiles of mechanically warped silicon wafers and (b) stress gradients near growing cracks in planar phase objects.

42 ENGINEERING↗

Macroscopic trends of linear tearing stability in cylindrical current profiles

Abstract The likelihood of realising tokamak power-plants will be greatly improved by the discovery of high-gain equilibria that resist the formation of small islands and hence avoid the disruptive neoclassical tearing mode. We propose a series of studies to understand how simple tokamak design can leverage aspects of tearing onset physics to maximise passive resistance to island formation. Here we investigate the variation that current profiles can bring about in preventing tearing onset through the cylindrical linear tearing stability parameter Δ ′ . A database of 159148 realistic pilot-plant current profiles was generated with Monte Carlo sampling, and the distribution of Δ ′ values was linked with interpretable profile characteristics. In agreement with prior theoretical and experimental studies, Δ ′ was found to be strongly correlated with the existence and steepness of a local toroidal current well or hill, with the former destabilising and the latter stabilising. In the absence of these two cases, the remaining Δ ′ values were linearly bounded by the toroidal current gradient at the rational surface.

Physics↗

Simultaneous control of the electron temperature and safety factor profiles in DIII-D using model-based optimal control techniques

Future tokamak power plants will likely operate using a single, well-defined plasma scenario, either in steady state or for very long pulse lengths. In order to enhance the robustness of the scenario, feedback controllers for a variety of plasma properties will be necessary to counteract any disturbances and ensure safe operation. However, only a limited set of actuators will be available to control many different quantities. Because of this, it is necessary to develop controllers that are able to regulate multiple plasma properties using a limited set of actuators. To this end, a controller has been developed for the simultaneous regulation of both the electron temperature and safety factor profiles in DIII-D. This algorithm uses a linear quadratic integral control synthesis approach based on a linearized model of the dynamics of the two profiles. Two neural network surrogate models, NubeamNet and MMMnet, are included to improve the fidelity of the model. Furthermore, the controller has been tested in simulation using COTSIM, and has demonstrated the ability to simultaneously track changes in both the electron temperature and safety factor targets, including changes in both the magnitude and the shape of the profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Zoomed high-resolution simulations of Multi-coupled Dark Energy: cored galaxy density profiles at high redshift

We perform for the first time high-resolution zoom-in re-simulations of individual halos in the context of the Multi-coupled Dark Energy (McDE) scenario, which is characterised by the existence of two distinct Dark Matter particle species with opposite couplings to a Dark Energy scalar field. We compare the structural properties of the simulated halos to the standard ΛCDM results. The zoomed-in initial conditions are set up using a specifically designed code called ZInCo that we publicly release along with the present paper. Our numerical results allow to investigate in detail and with unprecedented resolution the halo segregation process that characterises McDE cosmologies from its very early stages. In particular, we find that in contrast to what could be inferred from previous numerical analysis at lower resolution, the segregation process is already in place at redshifts as high as z ∼ 7. Most remarkably, we find that the subsequent evolution of the segregation leads to the formation of cored total matter density profiles with a core size that progressively increases in time. The shape of the cored profiles can be accurately predicted as the superposition of two NFW profiles with an increasing offset, thereby confirming the interpretation of the simulations results in terms of the segregation of the two dark matter components of the halo as a consequence of their different coupling to the Dark Energy field.

79 ASTRONOMY AND ASTROPHYSICS↗