SEARCH · Engineering Papers
Results for “phase control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Modulation Doping via a Two-Dimensional Atomic Crystalline Acceptor
Two-dimensional nanoelectronics, plasmonics, and emergent phases require clean and local charge control, calling for layered, crystalline acceptors or donors. Our Raman, photovoltage, and electrical conductance measurements combined with ab initio calculations establish the large work function and narrow bands of α-RuCl 3 enable modulation doping of exfoliated single and bilayer graphene, chemical vapor deposition grown graphene and WSe 2 , and molecular beam epitaxy grown EuS. We further demonstrate proof of principle photovoltage devices, control via twist angle, and charge transfer through hexagonal boron nitride. Short-ranged lateral doping (≤65 nm) and high homogeneity are achieved in proximate materials with a single layer of α-RuCl 3 . Here, this leads to the best-reported monolayer graphene mobilities (4900 cm 2 /(V s)) at these high hole densities (3 × 10 13 cm -2 ) and yields larger charge transfer to bilayer graphene (6 × 10 13 cm -2 ).
Signatures of Coherent Phonon Transport in Ultralow Thermal Conductivity Two-Dimensional Ruddlesden–Popper Phase Perovskites
An emerging class of methylammonium lead iodide (MAPbI 3 )-based Ruddlesden-Popper (RP) phase perovskites, BA 2 MA n-1 Pb n I 3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI 3 , yet still degrade at elevated temperatures. Here, we experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m∙K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m∙K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m∙K reported for single-crystal MAPbI 3 . Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.
Covariation of Slab Tracers, Volatiles, and Oxidation During Subduction Initiation
Abstract Subduction‐related lavas have higher Fe 3+ /∑Fe than midocean ridge basalts (MORB). Hypotheses for this offset include imprint from subducting slabs and differentiation in thickened crust. These ideas are readily tested through examination of the time‐dependent evolution of slab‐derived signatures, thickening crust of the overriding plate, and evolving redox during subduction initiation. Here, we present Fe 3+ /ΣFe and volatile element abundances of volcanic glasses recovered from International Ocean Discovery Program (IODP) Expedition 352 to the Izu‐Bonin‐Mariana (IBM) forearc. The samples include forearc basalts (FAB) that are stratigraphically overlain by low‐ and high‐silica boninite lavas. The FAB glasses have 0.18–0.85 wt% H 2 O, 75–233 ppm CO 2 , S contents controlled by saturation with a sulfide phase (602–1,386 ppm), Ba/La from 3.9‐10, and Fe 3+ /ΣFe ratios from 0.136 to 0.177. These compositions are similar to MORB and suggest that decompression melting of dry and reduced mantle dominates the earliest stages of subduction initiation. Low‐ and high‐silica boninite glasses have 1.51–3.19 wt% H 2 O, CO 2 below detection, S contents below those required for sulfide saturation (5–235 ppm), Ba/La from 11 to 29, and Fe 3+ /∑Fe from 0.181 to 0.225. The compositions are broadly similar to modern arc lavas in the IBM arc. These data demonstrate that the establishment of fluid‐fluxed melting of the mantle, which occurs in just 0.6–1.2 my after subduction initiation, is synchronous with the production of oxidized, mantle‐derived magmas. The coherence of high Fe 3+ /∑Fe and Ba/La ratios with high H 2 O contents in Expedition 352 glasses and the modern IBM arc rocks strongly links the production of oxidized arc magmas to signatures of slab dehydration.
Transferable dispersion-aware machine learning interatomic potentials for multilayer transition metal dichalcogenide heterostructures
Stacking atomically thin transition metal dichalcogenides (TMDs) into heterostructures enables exploration of exotic quantum phases, particularly through twist-angle-controlled moiré superlattices. These structures exhibit novel electronic and optical behaviors driven by atomic-scale structural reconstruction. However, studying such systems with DFT is computationally demanding due to their large unit cells and van der Waals (vdW) interactions between layers. To address this, we develop a transferable neural network potential (NNP) that includes long-range vdW corrections up to 12Å with minimal overhead. Trained on vdW-corrected DFT data for Mo- and W-based TMDs with S, Se, and Te, the NNP accurately models monolayers, bilayers, heterostructures, and their interaction with h-BN substrates. It reproduces equilibrium structures, energy landscapes, phonon dispersions, and matches experimental atomic reconstructions in twisted WS2 and MoS2/WSe2 systems. We demonstrate that our NNP achieves DFT-level accuracy and high computational efficiency, enabling large-scale simulations of TMD-based moiré superlattices both with and without substrates.
Field-resolved observation of exciton coherence in a van der Waals magnet
The emergence of coherence among electronic quasiparticles underlies collective quantum phenomena from superconductivity to superradiance. In semiconductors, exciton coherence is generally thought to decay rapidly due to scattering and dephasing, limiting its persistence on ultrafast timescales. Here, in this work, we demonstrate a light-field-driven mechanism that creates and stabilizes exciton coherence in the layered antiferromagnet CrSBr. We directly record the coherent optical field emitted by excitons and track in real time how a deterministic phase, imprinted by the excitation laser, drives incoherent excitons to synchronize into a collective state. This ensemble remains phase coherent for more than 2 ps, whereas its resonance energy undergoes an ultrafast modulation mediated by spin and lattice interactions. The time-resolved field evolution indicates that the multiple peaks seen in conventional spectra originate from a single excitonic resonance subject to dynamic energy modulation. Our findings establish optical phase imprinting as a mechanism to control and sustain collective order in semiconducting magnets, bridging light-driven dynamics with excitonic and magnetic correlations in layered quantum materials.
Predictions of delafossite-hosted honeycomb and kagome phases
Delafossites, typically denoted by the formula ABO 2 , are a class of layered materials that exhibit a wide range of electronic and optical properties. Recently, the idea of modifying these delafossites into ordered kagome or honeycomb phases via strategic doping has emerged as a potential way to tailor these properties. In this study, we use high-throughput density functional theory calculations to explore many possible candidate kagome and honeycomb phases by considering dopants selected from the parent compounds of known ternary delafossite oxides from the inorganic crystal structure database. Here our results indicate that while A-site in existing delafossites can host a limited range of elemental specifies, and display a low propensity for mixing or ordering, the oxide sub-units in the BO 2 much more readily admit guest species. Our study identifies four candidate B-site kagome and fifteen candidate B-site honeycombs with a formation energy more than 50 meV f.u. −1 below other competing phases. The ability to predict and control the formation of these unique structures offers exciting opportunities in materials design, where innovative properties can be engineered through the selection of specific dopants. A number of these constitute novel correlated metals, which may be of interest for subsequent efforts in synthesis. These novel correlated metals may have significant implications for quantum computing, spintronics, and high-temperature superconductivity, thus inspiring future experimental synthesis and characterization of these proposed materials.
Fatty acid foams for nonselective physical removal of microplastics from aqueous solutions
Microplastics (MPs) are pervasive environmental contaminants whose removal from water remains a major challenge due to their small size, chemical diversity, and dynamic surface properties arising from environmental aging/weathering. Here, we present a concept of foam-based separation method that physically traps MPs in the foam phase using microtubular assemblies of 12-hydroxystearic acid. These foams are stabilized by anisotropic fatty acid microtubules formed in the presence of ethanolamine, which jam within the foam channels and suppress fluid drainage thereby enhancing MP retention and foam stability. MPs of different sizes, polymer compositions (including polystyrene, polypropylene, polyethylene terephthalate, and polytetrafluoroethylene), and weathered states were retained in the foam phase without requiring chemical modification or relying on chemical interactions between the fatty acid and MPs. Thermally induced transition of the fatty acid microtubules into nanomicelles above the characteristic phase transition temperature (∼35 °C) enables controlled foam collapse and recovery of trapped MPs. The cumulative removal efficiency can exceed 85% through multiple foaming cycles, matching predictions from a probabilistic retention model. This work shows that foams can provide a simple platform to trap MPs, thus providing a new physical-removal strategy that does not rely on the particles’ chemistry.
Gas density structure of supersonic flows impinged on by thin blades for laser-plasma accelerator targets
Density transition injection is an effective technique for controllably loading electrons into a trapped phase for laser plasma accelerators. One common technique to achieve the required fluid structure is to impinge a thin blade on the plume of a supersonic nozzle. Density transitions induced in this way are often assumed to be bow shocks and therefore sharp, but simulations and fluorescence measurements presented in this work show that in many cases of interest, the density transition accessible to a laser propagating transverse to the shock is an intercepting shock, and therefore, shock thickness and density vary with pressure, laser height, and blade position. The fluid dynamics of a supersonic nozzle impinged on by a thin, flat object are explored through simulations and relevant features are verified via planar laser-induced fluorescence measurements. Overall, the implications of the results for tuning electron beam injectors in laser plasma accelerators are discussed.
Non-solvents as physical blowing agents in printable silicone foams
Silicone foams were produced by dispersing an incompatible liquid phase (i.e. a non-solvent) into an uncured, liquid silicone. The formulation and processing parameters were varied to see the effect on porosity and pore morphology. Specifically, two fluorosilanes were added to stabilize the inclusion of fluorinated solvents as blowing agents. As the floruosilane content increased, the void content increased up to about 44 vol. % when the fluorosilane comprised 18 wt. % of the initial formulation. Fumed silica that was treated with a fluorinated silane was also used to try to stabilize the dispersed liquid. While the fumed silica content did not have a strong effect on the total void content, the morphology changed when silica content changed. Various fluorinated solvents with distinct chemical structures were used as the non-solvent and then removed after curing of the silicone. The interaction of the internal non-solvent phase and the silicone phase was expected to influence the porosity. These insights highlight how the manipulation of formulation and processing parameters, focusing on the inclusion of fluorosilanes and fluorinated solvents, contributes to the understanding of how incompatible liquid phases interact with silicone matrices to control porosity and pore morphology. Additionally, these interactions also influenced processability, leading to formulations that could be printed. Higher content of non-solvent inclusions could increase the yield stress and storage modulus of an uncured formulation, leading to the ability to tune intrastrand porosity while a 3D printed architecture could be modified to introduce porosity between the strands. Furthermore, in addition to fluorinated solvents, we also considered non-fluorinated solvents since these may be more industrially relevant in the future. Overall, this approach provides an alternative route to producing porous foams that can be 3D printed, which could be useful for applications like cushioning and protective gear.
Quantum information approach to high energy interactions
High energy hadron interactions are commonly described by using a probabilistic parton model that ignores quantum entanglement present in the light-cone wave functions. Here, we argue that since a high energy interaction samples an instant snapshot of the hadron wave function, the phases of different Fock state wave functions cannot be measured—therefore the light-cone density matrix has to be traced over these unobservable phases. Performing this trace with the corresponding U(1) Haar integration measure leads to ‘Haar scrambling’ of the density matrix, and to the emergence of entanglement entropy. This entanglement entropy is determined by the Fock state probability distribution, and is thus directly related to the parton structure functions. As proposed earlier, at large rapidity η the hadron state becomes maximally entangled, and the entanglement entropy is S E ~η according to QCD evolution equations. When the phases of Fock state components are controlled, for example in spin asymmetry measurements, the Haar average cannot be performed, and the probabilistic parton description breaks down.
Stabilizing Non-Abelian Topological Order Against Heralded Noise via Local Lindbladian Dynamics
An important open question for the current generation of highly controllable quantum devices is understanding which phases can be realized as stable steady states under local quantum dynamics. In this work, we show how robust steady-state phases with both Abelian and non-Abelian mixed-state topological order can be stabilized, in two spatial dimensions, against generic “heralded” noise using active dynamics that incorporate measurement and feedback, modeled as a fully local Lindblad master equation. These topologically ordered steady states are two-way connected to pure topologically ordered ground states using local quantum channels, and preserve quantum information for a time that is exponentially large in the system size. Specifically, we present explicit constructions of families of local Lindbladians for both Abelian (ℤ 2 ) and non-Abelian (𝐷 4 ) topological order whose steady states host mixed-state topological order when the noise is below a threshold strength. As the noise strength is increased, these models exhibit first-order transitions to intermediate mixed-state phases where they encode robust classical memories, followed by (first-order) transitions to a trivial steady state at high noise rates. When the noise is imperfectly heralded, steady-state order disappears but our active dynamics significantly enhances the lifetime of the encoded logical information. To carry out the numerical simulations for the non-Abelian 𝐷 4 case, we introduce a generalized stabilizer tableau formalism that permits efficient simulation of the non-Abelian Lindbladian dynamics.
Transmission Data-Driven User-Defined Model for Inverter-based and Conventional Power Plants
Recent events in Odessa [1], [2] have shed light on the complexities of integrating large Inverter-Based Resource (IBR) plants with the transmission system, prompting NERC to stress continuous performance monitoring by transmission operators. Challenges such as plant control updates, IBR model revisions, Phase-locked loop loss of synchronism, and protection events have been identified, underscoring the need for enhanced monitoring protocols by regulatory bodies. The recent FERC 901 order underscores the importance of accurate data exchange regarding IBRs for reliability studies. However, limited access to IBR plant-related data hampers effective decision-making for transmission operators (TOP). This paper proposes a method for constructing data-driven User-Defined dynamic Models (UDM) for power plants for validating multiple-event data using field measurements from interconnection bus locations. The problem is formulated as a power plant model identification problem and a multi-task learning approach under partial input observability assumptions is proposed in this work. This approach aims to predict aggregated responses of conventional and IBR power plants during various dynamic physical events which is useful for planning studies under diverse disturbance conditions. Ultimately, this methodology emphasizes the importance of plant visibility to operators in addressing power system challenges, facilitating improved planning and operational studies.
Studying microbially induced corrosion on glass using ToF-SIMS
Microbially induced corrosion (MIC) is an emerging topic that has huge environmental impacts, such as long-term evaluation of microbial interactions with radioactive waste glass, environmental cleanup and disposal of radioactive material, and weathering effects of microbes. Time-of-flight secondary ion mass spectrometry (ToF-SIMS), a powerful mass spectral imaging technique with high surface sensitivity, mass resolution, and mass accuracy, can be used to study biofilm effects on different substrates. Understanding how to prepare biofilms on MIC susceptible substrates is critical for proper analysis via ToF-SIMS. We present here a step-by-step protocol for preparing bacterial biofilms for ToF-SIMS analysis, comparing three biofilm preparation techniques: no desalination, centrifugal spinning (CS), and water submersion (WS). Comparisons of two desalinating methods, CS and WS, show a decrease in the media peaks up to 99% using CS and 55% using WS, respectively. Proper desalination methods also can increase biological signals by over four times for fatty acids using WS, for example. ToF-SIMS spectral results show chemical compositional changes of the glass exposed in a Paenibacillus polymyxa SCE2 biofilm, indicating its capability to probe microbiologically induced corrosion of solid surfaces. This represents the proper desalination technique to use without significantly altering biofilm structure and substrate for ToF-SIMS analysis. ToF-SIMS spectral results showed chemical compositional changes of the glass exposed by a Paenibacillus bacterial biofilm over 3-month inoculation. Finally, possible MIC products include various phosphate phase molecules not observed in any control samples with the highest percent increases when experimental samples were compared with biofilm control samples.
Three-dimensional reconstruction of THz near-fields from a LiNbO3 optical rectification source
Terahertz (THz) generation by optical rectification in LiNbO3 (LN) is a widely used technique for generating intense THz radiation. The spatiotemporal characterization of THz pulses from these sources is currently limited to far-field methods. While simulations of tilted pulse front THz generation have been published, little work has been done to measure the near-field properties of the THz source. A better understanding of the THz near-field properties will improve optimization of THz generation efficiency, transport, and coupling. We demonstrate a technique for quantitative spatiotemporal characterization of single-cycle strong-field THz pulses with 2-D near-field electro-optic imaging. We have reconstructed the full temporal 3D THz near-field and shown how the phase front can be tailored by controlling the incident pump pulse.
JLAB LLRF 3.0 Development and Tests
The Jefferson Lab LLRF 3.0 system is being developed to replace legacy LLRF systems in the CEBAF accelerator. The new design builds upon 25 years of design and operational RF control experience, and our recent collaboration in the design of the LCLSII LLRF system. The new cavity control algorithm is a fully functional phase and amplitude locked Self Exciting Loop (SEL). This paper discusses the progress of the LLRF 3.0 hardware design, FPGA firmware development, User Datagram Protocol (UDP) operation, and recent LLRF 3.0 system tests on the CEBAF Booster cryomodule in the Upgrade Injector Test Facility (UITF).
Fossil Power Plant Cyber Security Life-Cycle Risk Reduction, A Practical Framework for Implementation
Market conditions are forcing fossil electricity generation facility owners and operators to implement advanced digital technologies. These technologies enable efficiencies, operational flexibility, operations and maintenance efficiencies, and adapting to a transitioning workforce. These digital technologies, however, can increase the cybersecurity attack surface. The purpose of this research was to develop a holistic cybersecurity risk reduction framework for fossil generation facilities. The framework begins with assessing how cyber risk changes across facility life cycles, including plant, system, vendor, and business life cycles. The next phase performs consequence analysis to prioritize high consequence events. Focusing on high consequence events allows owners to use a graded, risk-informed approach to prioritize cybersecurity efforts. The final phase identifies the digital asset attack surface in sensors and instrumentation and control equipment. After the vulnerabilities are identified, the owner selects mitigating cybersecurity control measures (or countermeasures) based on the risk analysis from the previous phases. This report describes the current industry cybersecurity best practices in fossil generation that are based on the first principles for cybersecurity engineering. The report is divided into five sections that describe the implementation of the risk reduction framework and present identified research, methodological, and technology gaps that were identified through this course of research and development.