Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “passivating layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The Estimation of Surface Latent Heat Flux Over the Ocean and its Relationship to Marine Atmospheric Boundary Layer (MABL) Structure

A new technique combining active and passive remote sensing instruments for the estimation of surface latent heat flux over the ocean is presented. This synergistic method uses aerosol lidar backscatter data, multi-channel infrared radiometer data and microwave scatterometer data acquired onboard the NASA P-3B research aircraft during an extended field campaign over the Atlantic ocean in support of the Lidar In-space Technology Experiment (LITE) in September of 1994. The 10 meter wind speed derived from the scatterometers and the lidar-radiometer inferred near-surface moisture are used to obtain an estimate of the surface flux of moisture via bulk aerodynamic formulae. The results are compared with the Special Sensor Microwave Imager (SSM/I) daily average latent heat flux and show reasonable agreement with an rms error and bias of about 50 and 25 W per square meters, respectively. In addition, the MABL height, entrainment zone thickness and integrated lidar backscatter intensity are computed from the lidar data and compared with the magnitude of the surface fluxes. The results show that the surface latent heat flux is most strongly correlated with entrainment zone top, bottom and the integrated MABL lidar backscatter, with corresponding correlation coefficients of 0.62, 0.67 and 0.61, respectively.

Palm, Stephen P.↗

Vapor-Deposited n = 2 Ruddlesden–Popper Interface Layers Aid Charge Carrier Extraction in Perovskite Solar Cells

Interfacial passivation with bulky organic cations such as phenetylammonium iodide has enabled high performance for metal halide perovskite optoelectronic devices. However, the homogeneity of these interfaces and their formation dynamics are poorly understood. Here we study how Ruddlesden-Popper 2D phases form at a 3D perovskite interface when the 2D precursors are introduced via solution or via vapor. When using vapor deposition, we observe uniform coverage of the capping layer and the formation of a predominantly n = 2 Ruddlesden-Popper phase. In contrast, when using solution deposition, we observe the presence of a mixture of n = 2 and n = 1 in the film and the formation of aggregates of the organic cations. As a result of the better phase purity and uniformity, vapor deposition enables higher median solar cell performance with narrower distribution compared to solution-treated films. This study provides fundamental information that the perovskite community can use to better design capping layers to achieve higher charge extraction efficiencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Electronic Properties of Mesopores in Si PV Devices with PLEO Contacts

All current state-of-the-art silicon photovoltaic (PV) devices employ some flavor of passivating contact structure to minimize detrimental recombination while providing good conductivity. These properties are most often provided by a dielectric layer (SiNx, Al2O3, or SiOx) that is in contact with the crystalline silicon (c-Si) substrate. The effectiveness of these layers is heavily dependent on the nanoscale structure of both the dielectric layers and the crystalline silicon interface. As an example, the tunneling probability for charge carriers across thin SiOx layers, a process that is critical to maintain high conductivity, is extremely sensitive to the SiOx thickness. SiOx with a thickness below 2 nm readily allows charge carrier tunneling, whereas it is impeded for greater thicknesses. In the latter case it has been shown that modifications to the thermal processing schedule can induce disruptions, or pinholes, in thick SiOx layers that allow transport of charge carriers while maintaining excellent passivation. However, this requires higher temperatures processes that may inhibit widespread adoption by industry. Recently, another option has been presented that may circumvent the necessity for high temperature processing, namely metal assisted chemical etching (MACE). MACE relies on deposition of Ag nanoparticles onto the SiOx layers with subsequent electroless etching to form mesopores in the SiOx layers that are analogous to the pinholes created with high temperature processing. The size and density can be controlled based on the Ag nanoparticle deposition conditions. The resulting contact structure is known as polysilicon on locally etched oxide (PLEO) contacts. The nanoscale structure of the mesopores in PLEO contacts define the device level observables such as recombination current (Jo) and junction resistance. In this work we present atomic resolution transmission electron microscopy (TEM) analysis of mesopores in PLEO contacts formed with a different processing conditions to connect provide insight into how the nanoscale structure of the SiOx layer influences PV device properties. Additionally, we have previously used electron beam induced current (EBIC) to probe local transport properties in Si PV devices with a SiOx layer containing pinholes due to high temperature processing. Using EBIC we were able to directly show the enhance charge carrier transport through the pinholes. Here we also employ EBIC to study non-uniformities in charge carrier recombination and transport associated with mesopores in PLEO contacts and compare these results with our previous work on devices with pinholes in the SiOx formed through high temperature processes. The products of this work provide critical information that is required to both further optimize performance of Si PV devices with PLEO contact and to drive future adoption of this technology by industry.

ENGINEERING,SOLAR ENERGY↗

Design and Fabrication of High-Efficiency CMOS/CCD Imagers

An architecture for back-illuminated complementary metal oxide/semiconductor (CMOS) and charge-coupled-device (CCD) ultraviolet/visible/near infrared- light image sensors, and a method of fabrication to implement the architecture, are undergoing development. The architecture and method are expected to enable realization of the full potential of back-illuminated CMOS/CCD imagers to perform with high efficiency, high sensitivity, excellent angular response, and in-pixel signal processing. The architecture and method are compatible with next-generation CMOS dielectric-forming and metallization techniques, and the process flow of the method is compatible with process flows typical of the manufacture of very-large-scale integrated (VLSI) circuits. The architecture and method overcome all obstacles that have hitherto prevented high-yield, low-cost fabrication of back-illuminated CMOS/CCD imagers by use of standard VLSI fabrication tools and techniques. It is not possible to discuss the obstacles in detail within the space available for this article. Briefly, the obstacles are posed by the problems of generating light-absorbing layers having desired uniform and accurate thicknesses, passivation of surfaces, forming structures for efficient collection of charge carriers, and wafer-scale thinning (in contradistinction to diescale thinning). A basic element of the present architecture and method - the element that, more than any other, makes it possible to overcome the obstacles - is the use of an alternative starting material: Instead of starting with a conventional bulk-CMOS wafer that consists of a p-doped epitaxial silicon layer grown on a heavily-p-doped silicon substrate, one starts with a special silicon-on-insulator (SOI) wafer that consists of a thermal oxide buried between a lightly p- or n-doped, thick silicon layer and a device silicon layer of appropriate thickness and doping. The thick silicon layer is used as a handle: that is, as a mechanical support for the device silicon layer during micro-fabrication.

Pain, Bedabrata↗

Evaluation and Applications of Multi-Instrument Boundary-Layer Thermodynamic Retrievals

Recent reports have highlighted the need for improved observations of the atmosphere boundary layer. In this study, we explore the combination of ground-based active and passive remote sensors deployed for thermodynamic profiling to analyze various boundary-layer observation strategies. Optimal-estimation retrievals of thermodynamic profiles from Atmospheric Emitted Radiance Interferometer (AERI) observed spectral radiance are compared with and without the addition of active sensor observations from a May–June 2017 observation period at the Atmospheric Radiation Measurement Southern Great Plains site. In all, three separate thermodynamic retrievals are considered here: retrievals including AERI data only, retrievals including AERI data and Vaisala water vapour differential-absorption lidar data, and retrievals including AERI data and Raman lidar data. First, the three retrievals are compared to each other and to reference radiosonde data over the full observation period to obtain a bulk understanding of their differences and characterize the impact of clouds on these retrieved profiles. These analyses show that the most significant differences are in the water vapour field, where the active sensors are better able to represent the moisture gradient in the entrainment zone near the boundary-layer top. Furthermore, we also explore how differences in retrievals may affect results of applied analyses including land–atmosphere coupling, convection indices, and severe storm environmental characterization. Overall, adding active sensors to the optimal-estimation retrieval shows some added information, particularly in the moisture field. Given the costs of such platforms, the value of that added information must be weighed for the application at hand.

54 ENVIRONMENTAL SCIENCES↗

Evaluation and Applications of Multi-Instrument Boundary-Layer Thermodynamic Retrievals

Recent reports have highlighted the need for improved observations of the boundary layer. In this study, we explore the combination of ground-based active and passive remote sensors deployed for thermodynamic profiling to analyze various boundary-layer observation strategies. Optimal-estimation retrievals of thermodynamic profiles from Atmospheric Emitted Radiance Interferometer (AERI) observed spectral radiance are compared with and without the addition of active sensor observations from a May–June 2017 observation period at the Atmospheric Radiation Measurement–Southern Great Plains Site. In all, three separate thermodynamic retrievals are considered here: retrievals including AERI data only, retrievals including AERI data and Vaisala water vapour differential absorption lidar data, and retrievals including AERI data and Raman lidar data. First, the three retrievals are compared to each other and to reference radiosonde data over the full observation period to get a bulk understanding of their differences and characterize the impact of clouds on these retrieved profiles. These analyses show that the most significant differences are in the water vapour field, where the active sensors are better able to represent the moisture gradient in the entrainment zone near boundary layer top. We also explore how differences in retrievals may impact results of applied analyses including land–atmosphere coupling, convection indices, and severe storm environmental characterization. Overall, adding active sensors to the optimal-estimation retrieval showed some added information, particularly in the moisture field. Given the costs of such platforms, the value of that added information must be weighed for the application at hand.

boundary-layer observation↗

A SIGNATURE OF CHEMICAL SEPARATION IN THE COOLING LIGHT CURVES OF TRANSIENTLY ACCRETING NEUTRON STARS

We show that convection driven by chemical separation can significantly affect the cooling light curves of accreting neutron stars after they go into quiescence. We calculate the thermal relaxation of the neutron star ocean and crust including the thermal and compositional fluxes due to convection. After the inward propagating cooling wave reaches the base of the neutron star ocean, the ocean begins to freeze, driving chemical separation. The resulting convection transports heat inward, giving much faster cooling of the surface layers than found assuming the ocean cools passively. The light curves including convection show a rapid drop in temperature weeks after outburst. Identifying this signature in observed cooling curves would constrain the temperature and composition of the ocean as well as offer a real time probe of the freezing of a classical multicomponent plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of soluble inhibitors on the corrosion behaviour of galvanized steel in fresh concrete

Highlights: • Metastable passivation of galvanized steel occurs immediately in concrete with Cr VI ≥ 15 ppm. • Stable passivation of galvanized steel in concrete with Cr VI ≥ 6 ppm occurs in three steps. • Nitrite decreases hydrogen evolution by moving corrosion potential to more positive values. • Nitrite favours the formation of a compact layer of CHZ, which leads to a stable passivation. • DEA and MoO{sub 4}{sup 2-} do not have significant effect on the passivation time of galvanized steel. - Abstract: The effect of some soluble inhibitors on the passivation time of galvanized steel reinforcements in fresh concrete was studied in order to reduce H{sub 2} evolution associated with the active corrosion. The investigation was performed by means of corrosion potential monitoring, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis. The obtained results indicate that the passivation of galvanized steel in concrete containing chromates occurs in three steps with different mechanisms and that dissolved oxygen is necessary for the beginning of passivation process. Among the inhibitors studied as alternative to Cr VI, nitrite seem the most promising one, even if it is less effective than chromate. Diethanolamine and molybdate ions do not have significant effect on the passivation time of galvanized steel in fresh concrete.

36 MATERIALS SCIENCE↗

Stability of S and Se induced reconstructions on GaP(001)(2×1) surface

The structural and electronic properties of S- and Se- passivated GaP(001)(2×1) surfaces were studied using first-principles simulations. Our calculations showed that the most stable structure consists of a single chalcogen atom (S or Se) in the first crystal layer, which is bonded to two Ga atoms of the second layer, and the third P layer replaced by chalcogen atoms, similar to the passivation of GaAs(001)(2×1) surface by chalcogen atoms. The structural parameters were determined and the surface band characters and the local density of states were also analyzed. The results showed that the preferable structure has no surface states in the bulk band gap, but the energy band gaps of the S- and Se-adsorbed GaP(001) surfaces are 1.83eV and 1.63eV, respectively. The passivation effects for the S- and Se-adsorbed surfaces are similar to each other.

36 MATERIALS SCIENCE↗

Monolithic integrated quantum dot photonic integrated circuits

A photonic integrated circuit (PIC) includes a semiconductor substrate, one or more passive components, and one or more active components. The one or more passive components are fabricated on the semiconductor substrate, wherein the passive components are fabricated in a III-V type semiconductor layer. The one or more active components are fabricated on top of the one or more passive components, wherein optical signals are communicated between the one or more active components via the one or more passive components.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monolithic integrated quantum dot photonic integrated circuits

A photonic integrated circuit (PIC) includes a semiconductor substrate, one or more passive components, and one or more active components. The one or more passive components are fabricated on the semiconductor substrate, wherein the passive components are fabricated in a III-V type semiconductor layer. The one or more active components are fabricated on top of the one or more passive components, wherein optical signals are communicated between the one or more active components via the one or more passive components.

Bowers, John E.↗

AlInP-passivated III–V solar cells grown by dynamic hydride vapor-phase epitaxy

We report the development of AlInP-passivated solar cells grown by dynamic hydride vapor-phase epitaxy (D-HVPE) with AM1.5G efficiencies of 26.0% for single-junction (1J) GaAs cells and 28.0% for GaInP/GaAs (2J) tandems. We compare the device performance of solar cells passivated with AlInP versus control cells passivated with GaInP, which has already enabled near-unity carrier collection in GaAs solar cells. 1J devices passivated with either AlInP or GaInP have an identical open-circuit voltage (V OC ) of 1.06 V and long-wavelength current collection near 95%, indicating that both window materials provide a similar degree of passivation. Adding AlInP passivation to each solar cell structure improves the current collection by 1.3 and 1 mA/cm 2 for the 1J and 2J, respectively. The AlInP also results in a top cell V OC boost of ~40 mV relative to a tandem device passivated only by a thin, highly doped GaInP emitter. Secondary-ion mass spectrometry measurements indicate that although O and Si both incorporate in the AlInP window, they do not appear in the subsequently grown absorber layers and do not impact its ability to passivate the front surface. We expect that these achievements, along with continued optimization, will enable parity of hydride vapor-phase epitaxy (HVPE)-grown device efficiencies with state-of-the-art devices grown by other epitaxial methods in the near future.

14 SOLAR ENERGY↗

What's on the Surface? Physics and Chemistry of Delta-Doped Surfaces

Outline of presentation: 1. Detector surfaces and the problem of stability 2. Delta-doped detectors 3. Physics of Delta-doped Silicon 4. Chemistry of the Si-SiO2 Interface 5. Physics and Chemistry of Delta-doped Surfaces a. Compensation b. Inversion c. Quantum exclusion. Conclusions: 1. Quantum confinement of electrons and holes dominates the behavior of delta-doped surfaces. 2. Stability of delta-doped detectors: Delta-layer creates an approx 1 eV tunnel barrier between bulk and surface. 3. At high surface charge densities, Tamm-Shockley states form at the surface. 4. Surface passivation by quantum exclusion: Near-surface delta-layer suppresses T-S trapping of minority carriers. 5. The Si-SiO2 interface compensates the surface 6. For delta-layers at intermediate depth, surface inversion layer forms 7. Density of Si-SiO2 interface charge can be extremely high (>10(exp 14)/sq cm)

detectors↗

High-efficiency selective boron emitter formed by wet chemical etch-back for n -type screen-printed Si solar cells

Front metal contact induced recombination and resistance are major efficiency limiting factors of large-area screen-printed n-type front junction Si solar cells with homogeneous emitter and tunnel oxide passivated back contact (TOPCON). Here, this paper shows the development of a selective boron emitter (p + /p ++ ) formed by a screen-printed resist masking and wet chemical etch-back process, which first grows a porous Si layer and subsequently removes it. Various wet-chemical solutions for forming porous Si layer are investigated. An industrial compatible process with sodium nitrite (NaNO 2 ) catalyst is developed to uniformly etch-back the ~47 Ω/ atmospheric pressure chemical vapor deposited heavily doped boron emitter to ~135 Ω/ by growing a 320 nm porous Si layer within 3 min and subsequently removing it. After etching back, the boron emitter was subjected to a thermal oxidation to lower the surface concentration and the emitter saturation current density J 0e . Various etched-back emitters were evaluated by measuring J 0e on symmetric test structures with atomic layer deposited aluminum oxide (Al 2 O 3 ) passivation. Very low J 0e of 21, 14, and 9 fA/cm 2 were obtained for the 120, 150, and 180 Ω/ etched-back emitters, respectively. A solar cell with a selective emitter (65/180 Ω/ ) formed by this etch-back technology and with an Al/Ag contact on the front and TOPCON on the back gave an open-circuit voltage (V oc ) of 682.8 mV and efficiency of 21.04% on n-type Czochralski Si wafer. Finally, this demonstrates the potential of this technology for next generation high-efficiency industrial n-type Si solar cells.

14 SOLAR ENERGY↗

The Feasibility of Detecting Supercooled Liquid with a Forward-Looking Radiometer

A three-dimensional radiative transfer model is utilized to determine the feasibility of a forward-viewing passive sensor for remotely detecting hazardous icing conditions. Wband ground-based radar simulations show no obvious ability to discriminate a cloud-top supercooled layer; however, the spectra for a forward-viewing passive sensor show a strong signal at two stand-off distances when compared with the clear sky spectrum. Such an instrument would be critical for manned and unmanned aircraft, particularly when size, weight, and power requirements restrict the installation of deicing equipment.

clouds↗

Fabrication of films and coatings used to activate shear thickening, impact resistant electrolytes

A method of making a passively impact resistant composite electrolyte and separator layer includes providing a suspension composition including electrically non-conducting particles that enable shear thickening. The particles can have a polydispersity index of no greater than 0.1, an average particle size in a range of from 50 nm to 1 um, and an absolute zeta potential of greater than ±40 mV. A particle suspension solvent is provided for suspending the particles. The suspension composition is applied to a porous separator material. A portion of the particles and suspension solvent penetrate the pores and the remainder of the particles in the suspension composition are distributed across the surface of the separator material. The suspension solvent is evaporated from the separator material to provide a shear thickening particle loaded separator. A separator assembly and a passivated battery are also disclosed.

25 ENERGY STORAGE↗

Fabrication of films and coatings used to activate shear thickening, impact resistant electrolytes

A method of making a passively impact resistant composite electrolyte and separator layer includes providing a suspension composition including electrically non-conducting particles that enable shear thickening. The particles can have a polydispersity index of no greater than 0.1, an average particle size in a range of from 50 nm to 1 um, and an absolute zeta potential of greater than ±40 mV. A particle suspension solvent is provided for suspending the particles. The suspension composition is applied to a porous separator material. A portion of the particles and suspension solvent penetrate the pores and the remainder of the particles in the suspension composition are distributed across the surface of the separator material. The suspension solvent is evaporated from the separator material to provide a shear thickening particle loaded separator. A separator assembly and a passivated battery are also disclosed.

Armstrong, Beth L.↗

Detailed investigation of electrical and optical properties of textured n-type and roughened p-type tunnel oxide passivated contacts for screen-printed double-side passivated contact silicon solar cell application

Here, this paper presents detailed characterization and analyses of the optical, electrical, and contact properties of a 35 nm phosphorus-doped (n-type) polysilicon (poly-Si) and a 250 nm boron-doped (p-type) poly-Si deposited respectively on textured and roughed surface. These layers could be applied respectively to the front and rear sides of an n-type Si to produce back junction bifacial screen-printed double-side tunnel oxide passivated contacts (DS-TOPCon) solar cells. Optical and device modeling revealed a short circuit current density loss of 1.5 mA/cm 2 and 0.5 mA/cm 2 due to absorption in the front n-TOPCon and rear side p-TOPCon layers, respectively. The passivation and contact properties including metalized and unmetallized recombination current density (J 0 ), as well as contact resistivity, were determined as a function of contact firing temperature in the range of 700~800°C. The passivation quality of the front thin n-TOPCon was found to deteriorate with increased firing temperature while the rear thick p-TOPCon improved. The study showed that the simulated contact firing at 730°C resulted in the best unmetallized double-side TOPCon precursor, with an excellent implied open-circuit voltage of 730 mV and implied fill factor of ~86 %. However, the metalized J0 increased and contact resistivity decreased monotonically with the increase in the firing temperature. The 2D device simulations revealed that these layers can produce screen-printed DS-TOPCon cells with an efficiency of ~22.5 %. Solar cell modeling also showed that the DS-TOPCon solar cell efficiency can reach 24.1 % by decreasing the n-TOPCon thickness to 20 nm and lowering the full area metalized J 0 to ~100 mA/cm 2 .

14 SOLAR ENERGY↗