SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A three-dimensional CW Doppler sounding system currently under operation at the NASA-Marshall Space Flight Center, Alabama is described. The properties of the neutral atmosphere are discussed along with the theory of Doppler sounding technique. Methods of data analyses used to investigate the dynamical phenomena at the ionospheric heights are presented and suggestions for future investigations provided.
This paper presents a procedure that extends some existing radiative transfer modeling techniques to problems in atmospheric science where curvature and layering of the medium and dynamic range and angular resolution of the signal are important. Example problems include twilight and limb scan simulations. Techniques that are extended include successive orders of scattering, matrix operator, doubling, Gauss-Seidel iteration, discrete ordinates and spherical harmonics. The procedure for extending them is based on Bayes' rule from probability theory.
A theoretical and experimental study is carried out to develop a first-principles analysis for predicting noise generated by helicopter main-rotor shed vortices interacting with the tail rotor. The generalized prediction procedure calls for a knowledge of the incident vortex velocity field, the rotor geometry, and the rotor operating conditions. The analysis encompasses compressibility effects and chordwise and spanwise noncompactness and treats oblique intersections with the blade planform. In assessing the theory, a model rotor experiment which isolates the blade-vortex interaction noise from other rotor noise mechanisms is conducted. An isolated tip vortex, generated by an upstream semispan airfoil, is convected into the model rotor, and acoustic spectra, pressure signatures, and directivity are measured. Ingestion of the vortex by the rotor is experimentally observed to generate harmonic noise and impulsive waveforms.
The prediction of rotordynamic coefficients for gas seals is achieved with the aid of a two-volume bulk flow model based on turbulent rotationally symmetric 3D flow calculations including swirl flow. Comparison of cross-coupling and damping coefficients with measurements confirm this approach. In particular the theoretically predicted phenomenon that labyrinth damping is retained without inlet swirl is confirmed. This is important for the design of high pressure compressors, where labyrinth damping is a major contribution improving rotor stability. Discrepancies are found when comparing theory with measured direct stiffness and the cross-coupling damping coefficients. First measurements of labyrinth seals on a recently installed test rig operated with water are presented. Since forces are larger than on test stands operated with air and since individual chamber forces are obtained phenomena like inlet effects may be studied.
This paper introduces a new method for learning to refine a rule-based fuzzy logic controller. A reinforcement learning technique is used in conjunction with a multilayer neural network model of a fuzzy controller. The approximate reasoning based intelligent control (ARIC) architecture proposed here learns by updating its prediction of the physical system's behavior and fine tunes a control knowledge base. Its theory is related to Sutton's temporal difference (TD) method. Because ARIC has the advantage of using the control knowledge of an experienced operator and fine tuning it through the process of learning, it learns faster than systems that train networks from scratch. The approach is applied to a cart-pole balancing system.
During the reporting period, the development of the theory and application of methodologies for decision making under uncertainty was addressed. Two subreports are included; the first on properties of general hybrid operators, while the second considers some new research on generalized threshold logic units. In the first part, the properties of the additive gamma-model, where the intersection part is first considered to be the product of the input values and the union part is obtained by an extension of De Morgan's law to fuzzy sets, is explored. Then the Yager's class of union and intersection is used in the additive gamma-model. The inputs are weighted to some power that represents their importance and thus their contribution to the compensation process. In the second part, the extension of binary logic synthesis methods to multiple valued logic synthesis methods to enable the synthesis of decision networks when the input/output variables are not binary is discussed.
Chapters XI to XIII concern the unsteady compressor operation arising when compressor blade elements stall. The fields of compressor stall and surge are reviewed in Chapters XI and XII, respectively. The part-speed operating problem in high-pressure-ratio multistage axial-flow compressors is analyzed in Chapter XIII. Chapter XIV summarizes design methods and theories that extend beyond the simplified two-dimensional approach used previously in the report. Chapter XV extends this three-dimensional treatment by summarizing the literature on secondary flows and boundary layer effects. Charts for determining the effects of errors in design parameters and experimental measurements on compressor performance are given in Chapters XVI. Chapter XVII reviews existing literature on compressor and turbine matching techniques.
If the air-cargo market increases at the pace predicted, a new conceptual aircraft will be demanded to meet the needs of the air-cargo industry. Furthermore, it has been found that not only should this aircraft be optimized to carry the intermodal containers used by the current shipping industry, but it should also be be able to operate at existing airports. The best solution to these problems is a configuration incorporating a bi-wing planform, which has resulted in significant improvements over the monoplane in lift/drag, weight reduction, and span reduction. The future of the air-cargo market, biplane theory, wind tunnel tests, and a comparison of the aerodynamic characteristics of the biplane and monoplane are discussed. The factors pertaining to a biplane cargo transport are then examined, resulting in biplane geometric parameters.
A method is developed with no neglect of certain factors in mass flow of air and in the drag of the heated radiator, i.e., one under actual operating conditions, as compared with the corresponding values in the cold state, may be simply computed. Although a symmetrical duct radiator has been used to bring out the flow relations, the results apply equally as well to the unsymmetrical radiator shapes usual in airplane construction.
We show that by certain transformations the boundary layer equations for the class of non-Newtonian fluids named pseudoplastic can be generalized in the form the vector differential operator(u) + p(x)u(exp -lambda) = 0, where x is a member of the set Omega and Omega is a subset of R(exp n), n is greater than or equal to 1 under the classical conditions for steady flow over a semi-infinite flat plate. We provide a survey of the existence, uniqueness, and analyticity of the solutions for this problem. We also establish numerical solutions in one- and two-dimensional regions using multigrid methods.
Constructing improved hamiltonians for gauge theories coupled to fermonic matter will be important for improving continuum limit extrapolations of quantum computations. In this talk we will present a formulation for simulating ASQTAD fermions for lattice computation and provide fault tolerant resource costs in terms of primitive group operations. We additionally show that the scaling of energies with respect to the lattice spacing are better than for the unimproved Hamiltonian for toy models.
Cathode erosion is one of the life limiting mechanisms for several classes of electric thrusters. Since cathode erosion is strongly dependent on the cathode temperature, a quantitative understanding of the effects of cathode operation on the cathode temperature is required. The development of a cathode/plasma interaction model for determining the heat loads to the cathode as function of the various free stream plasma parameters is presented. This model is combined with a cathode thermal model in order to provide a complete and integrated picture of high current cathode operation.
Human dynamic space orientation using control theory techniques
Cross correlation bounds and positivity of nonlinear operators, examining criteria for positive composition
The systems theory is discussed in relation to safety management. It is suggested that systems safety management, as a new discipline, holds great promise for reducing operating errors, conserving labor resources, avoiding operating costs due to mistakes, and for improving managerial techniques. It is pointed out that managerial failures or system breakdowns are the basic reasons for human errors and condition defects. In this respect, a recommendation is made that safety engineers stop visualizing the problem only with the individual (supervisor or employee) and see the problem from the systems point of view.
Extensive performance data derived from tests with an aluminum axial grooved extruded heat pipe is presented for oxygen, methane, ethane, and ammonia as working fluids. The effects of operating temperature, fluid inventory, heat flux, and elevation on the transport capability and the evaporator and condenser film coefficients are measured and compared to theory. The data correlation indicates that, in addition to the viscous pressure drop of the fluid, a vapor induced liquid pressure drop must be taken into account at temperatures near or below the normal boiling point of the fluid. Methane, ethane, and ammonia are all suitable working fluids for this groove geometry; however, oxygen, because of its low static height, is at best marginal in the 100-120 K range.
This bibliography lists 706 reports, articles, and other documents introduced into the NASA scientific and technical information system in 1984. Entries, which include abstracts, are arranged in the following categories: human factors and personnel issues; management theory and techniques; industrial management and manufacturing; robotics and expert systems; computers and information management; research and development; economics, costs, and markets; logistics and operations management; reliability and quality control; and legality, legislation, and policy. Subject, personal author, corporate source, contract number, report number, and accession number indexes are included.
This bibliography lists 707 reports, articles and other documents introduced into the NASA scientific and technology information system in 1985. Items are selected and grouped according to their usefulness to the manager as manager. Citations are grouped into ten subject categories: human factors and personnel issues; management theory and techniques; industrial management and manufacturing; robotics and expert systems; computers and information management; research and development; economics, costs, and markets; logistics and operations management; reliability and quality control; and legality, legislation, and policy.