Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Pressure Exchanger for Energy Recovery in a Trans-Critical CO2 Refrigeration System

Trans-critical CO2 vapor compression (VC) refrigeration cycles require a high compression ratio, which is associated with high expansion losses. To recover these expansion losses, a pressure exchange process between the low- and high-pressure sides of the VC cycle is proposed and examined in this study. The proposed pressure exchange system is an open type constant volume process where the high- and low-pressure flows mix inside the system. This prototype is inspired by the pressure exchangers used in reverse-osmosis (RO) desalination systems. In this system, a 2D model was generated and modeled using the computational fluid dynamics (CFD) technique. The numerical model ignored any losses due to leakage or hydraulic friction and the process is considered adiabatic. For the modeling, it was assumed that the inlet conditions for the two pressure exchanger flows are similar to the flow conditions at the evaporator and gas cooler outlets in a VC cycle. Two parameters are examined to test the validity of the system and understand their effect on the performance, including the inlet flow rate represented by the inlet velocity and the process time represented by the speed of rotation. A total of nine cases were simulated and analyzed in this study.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Hardness Measurements and Interface Behavior of SiC-B 4 C-Si Multiple Phase Particulate Composites Made with Melt Infiltration and Additive Manufacturing

Reaction-bonded SiC-B 4 C-Si ceramic composites were binder jet 3D-printed and subsequently pressureless-melt-infiltrated with molten Si. The addition of B 4 C aided the Si infiltration to produce a highly dense composite. The microstructures and phases of these composites were examined. The measured hardness values of each constituent with Vickers and nanoindentation matched the bulk values, and the macro-hardness values with Knoop and spherical indentation represented the bulk, composite hardness values of all three phases together, which was close to a rule of mixtures value. For particulate-based composites, this is a significant finding. The interfacial bonds of SiC and Si were imaged using scanning transmission electron microscopy to view intimacy, whereas the crack propagation was examined with carefully placed indents. This work demonstrated that pressureless melt infiltration with a reactive particle provides a method to shape non-wetting reaction-bonded ceramic composites with limited shrinkage and high density and provides insights into the mechanical behavior with numerous indentation techniques.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Numerical solution of flowfields behind rectangular wings

The numerical solution of flow fields behind rectangular wings is described. Subjects discussed are: (1) evaluation of various differencing methods applied to the hyperbolic partial differential equations encountered in gas dynamics, (2) application of the numerical differencing techniques to the wedge flow, two dimensional shock reflection for the three dimensional finite thickness wing at zero degrees angle of attack, and (3) calculation of preliminary results for wedge flows using optimum differencing methods.

Anderson, D.↗
NASA NTRS1972

Goddard trajectory determination subsystem: Mathematical specifications

The mathematical specifications of the Goddard trajectory determination subsystem of the flight dynamics system are presented. These specifications include the mathematical description of the coordinate systems, dynamic and measurement model, numerical integration techniques, and statistical estimation concepts.

Wagner, W. E.↗
NASA NTRS1972

Assessment of advances in structural analysis for space shuttle

The latest technology for structural analysis in relation to the design tasks that lie ahead for the space shuttle is reviewed. For shell-of-revolution structures, the analysis can be formulated as a one-dimensional problem which is readily solved by using finite-difference or numerical-integration techniques. For more general asymmetric shells, a two-dimensional formulation is required. However, the governing equations are readily formulated and are amenable to solution by finite-difference techniques. For a completely general structural arrangement, such as structural frameworks, recourse is usually made to discretized formulations using finite elements. Of course, the finite-element programs could be used for shell structures, but at a loss in accuracy and increase in computer time compared with the special purpose programs.

Dixon, S. C.↗
NASA NTRS1971

Non-partial wave treatment of reactive and non-reactive scattering Coupled integral equation formalism.

Coupled integral equations are derived for the full scattering amplitudes for both reactive and nonreactive channels. The equations do not involve any partial wave expansion and are obtained using channel operators for reactive and nonreactive collisions. These coupled integral equations are similar in nature to equations derived for purely nonreactive collisions of structureless particles. Using numerical quadrature techniques, these equations may be reduced to simultaneous algebraic equations which may then be solved.

Hayes, E. F.↗
NASA NTRS1972

Numerical averaging in orbit prediction.

This paper is a presentation of some useful aspects of a numerical averaging technique that has been applied with considerable success to the orbit prediction problem for artificial satellites. The method has been tested in a variety of situations wherein the satellite is subjected to combinations of perturbations for which adequate analytic theories are practically impossible. The technique provides many of the advantages of analytic averaging while retaining the ability to simulate the effects of any kind of small force that can be deterministically modeled. The theoretical basis for the method is straightforward but the details of its implementation are somewhat confusing and need some explanation. A particularly useful set of averaged equations is presented along with a description of an efficient algorithm for their solution. Examples of the advantages to be obtained by use of the method are included.

Uphoff, C.↗
NASA NTRS1972

The optimal control of merging aircraft - Implementation of the hybrid air traffic controller.

The control of merging aircraft is formulated as a finite-time, quadratic optimal control problem of a linear system with state and control constraints. The purpose of this paper is to demonstrate that the Hybrid Air Traffic Controller (HAC), which has been previously developed as a solution to this problem, may be easily implemented. Use is made of both the properties of the algebraic solution to the matrix Riccati equation and the structure of the linear model. This approach results in a real-time synthesis procedure for the HAC which does not rely on iterative numerical integration techniques.

Schatz, J. G.↗